Experience definition bugs

I migrated the portal from ALUI 6.1 to WCI 10.3.0.
After the migration, all the existing Experience definitions works well, but when I create a new Experience definition, and I login as a user who is part of the Administrative Folder associated with the experience definition the portal displays 2 lines for the banner saying "Welcome,...My Account,...", and also displays 2 menus, one I selected for the Exp definition, and one blue, with orizontal tabs, which looks like the default portal menu.
Anyone experiencing this bug?
Thanks!
Val

Hi Val,
The current default behavior for creating new my pages uses Adaptive Layouts: "Default Portlet Layout".
So, When you select create "my page", it is recommended that you use the "Classic Layouts", not the adaptive layout.
It not a actual problem unless you mix adaptive layouts and Classic Layouts, where you may see goofy behavior.
You should either subscribe to "classic" or "adaptive layouts".
Unfortunately, there currently is not a way not to set a configurable default layout.
Cheers!
RichardL

Similar Messages

Definite bugs in "install_flashplayer14x32au_mssa_aaa_aih.exe"

Note first that I was a senior IT contractor (all my code was bonded) so I do know a fair bit about computers.
There are definitely bugs in the install fil : "install_flashplayer14x32au_mssa_aaa_aih.exe"
I am on FIREFFOX 30, WIN XP PRO SP3
Here was my experience :
* I did not realize my daughter had already installed the update, because the adobe site kept coming up on FIREFOX automatically every time that the browser started (even though flash sites work fine and it was installed properly by her).
* So I ran it. The install claimed (every time) that I do not have enough drive space. This is not the case.
I went on to the page for testing my install ( "http://helpx.adobe.com/flash-player.html" ) which told me
    Congratulations, your computer has the latest Flash Player beta
    version installed. ( Your version14.0.0.125 Latest Version12.0.0.77 )
and the flash animation was fine.
However I still kept having the install page on ADOBE come up when FIREFOX started up. I tried (again and again) to use the install :
    "install_flashplayer14x32au_mssa_aaa_aih.exe"
but every single time I got the error about not having enough drive space (I do so - tons)
* so I looked at forum posts and found the bundled install lin ( install_flash_player.exe )
And I used this instead (to make sure all was well)
    http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe
    The version in the properties is 14.0.0.125
This installed perfectly.
- I did not get any error messages telling me I did not have enough drive space
- I no longer to sent off to ADOBE every time FIREFOX starts, with a message telling me I need to update
* The page "http://helpx.adobe.com/flash-player.html" gives me this feedback :
    Congratulations, your computer has the latest Flash Player beta
    version installed. ( Your version14.0.0.125 Latest Version12.0.0.77 )
So, I suggest you fix "install_flashplayer14x32au_mssa_aaa_aih.exe" so that it :
1) knows that the program is already installed (duh)
2) does not tell people they do not have enough drive space when they do

Any rational for this?
Bad definitons file in your A/V.
NO freeware from adobe is password protected... ever.
NO software from Adobe contains viruses... ever.
Download the Adobe Flash Player installer directly by clicking one of the following links.
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
NO need to scan them. They come from a safe source (here).

URL mapping config for Experience Definition rule

Hello,
I have a question regarding the configuration of url mappings for experience definitions. Here is our scenario:
We have 2 experience definitions that allow us to localize the guest user experience when a user hits the portal for the first time. We need to setup 2 rules that are based on url so that if a user comes from one url they get the English definition and the other url gives the French definition.
This portal will be access by outside users and we cannot have two different domain or sub-domain names in order to differentiate the 2 urls. We’ve been told that it is possible to setup a system so that 2 different context url can resolve to the actual portal url so that the portal sees the different url values and serves up the proper experience def.
So basically I am asking for a somewhat detailed explanation of how to configure it so we have one of the following 2 setups (whichever one is possible):
English url = http://www.domain.ca/portal/en/server.pt
French url = http://www.domain.ca/portal/fr/server.pt
OR
English url = http://www.domain.ca/portal/en.pt
French url = http://www.domain.ca/portal/fr.pt
And both of these urls would map to the same portal at http://www.domain.ca/portal/server.pt (not directly accessible from outside)
We have the portal deployed via Websphere 6.1 on AIX and using IBM HTTP server.
Any help regarding how to configure app server, web server, portal would be greatly appreciated.
Thank you
Richard

Hi Doevelaar,
sorry, no help but: Iam fighting like you.
I tried the same to get multiple databases to live: no result
I tried to get a connection to configure apex-listener running under Glassfish via SQL-Developer: no Connection possible
I tried to get a connection to configue apex-listener via SQL-Developer : this works if Apex-Listener runs standalone but: I can't store the configuration
I am surely a Oracle-fan with APEX and the DBMS but all installations of Oracle makes me mad.
Try to install the dbms 3 times, it will react 3 times different.
The clone tool of db's works one day, the next one it stops anywhere without any online comment (anywhere in hidden logs you will find a miracle error description.. java-errors self explaining if you know all libaries)
I dont know who ever makes quality checks there but they need any old guy, not the young hackers.
I think Bill Gates has time.
I am so frustrated with all this installation stuff and sh..., i hope one day microsoft buys Oracle, then the installation may be smooth and all features will work.
And you dont have to be a script guru to manage an update, may be. This is naturally only a daydream...
I work like you at this problem, if I have any solution I let you know.
Cheers
me

Experience Definitions - Change during a user's session

I'm attempting to change a user's experience definition during their session and I would like the new experience to appear during their session.
I am removing their ID from a default group via the server API, so now they hit the second experience definition rule. I would like to redirect them to their new experience and have them land on the default community. My issue is that that experience seems to be cached and I have to log them out and in manually before the new experience shows up. Any ideas of how I can do this programmatically?
Think of this like changing to a new skin on a website and not having the user log in and out for it to take affect.
Thanks!

Could you please share the API that you have and you are using to add/remove default group?
I have a problem where I have multiple groups/Experice Definitions assign to that user and I was wondering how could a select a default.

Default style in experience definition

Hi, I can not see list of 18 styles in Default Style dropdown while configuring a new experience definition. I can see only one entry i.e., "User Portal Style". Does any one come across this issue?
thanks
sampath

i could able to resolve this issue. this was due to some issues with my image server.
thanks
sampath

G6 Experience Definition Editor won't open

Hi,
Following an upgrade from 5.0.4 Windows/Java to G6 on Solaris/Tomcat, the Experience Definition Editor won't start. It spews a bunch of errors, but I think this one is the root cause:
3-20-2006       14:53:56.928    Warning OpenKernel.OpenHttp.Core        portal.servername.plumtree       PTSelectorThread_33500699       com.plumtree.
openkernel.impl.openhttp.core.PTRequest OnClose() - Socket was closed before we got back complete headers. Data read from the network - [2300] bytes. Number
of retries - [4]. Registerring error for URL [http://localhost:8080/imageserver/plumtree/common/public/css/community-themes.txt]. <ptLogMsgEnd>
3-20-2006       14:53:56.929    Warning OpenKernel.OpenHttp.Core        portal.servername.plumtree       PTSelectorThread_33500699       com.plumtree.
openkernel.impl.openhttp.core.PTRequest OnError() - Cancelling request to [http://localhost:8080/imageserver/plumtree/common/public/css/community-themes.txt]
because of exception.
com.plumtree.openfoundation.util.XPException: No data received from the remote server!
        at com.plumtree.openkernel.impl.openhttp.core.PTRequest.OnClose(PTRequest.java:962)
        at com.plumtree.openkernel.impl.openhttp.core.network.PTSocketSelector.processReadableEvent(PTSocketSelector.java:370)
        at com.plumtree.openkernel.impl.openhttp.core.network.PTSocketSelector.processSelectedChannels(PTSocketSelector.java:304)
        at com.plumtree.openkernel.impl.openhttp.core.network.PTSocketSelector.run(PTSocketSelector.java:403)
        at java.lang.Thread.run(Thread.java:534 <ptLogMsgEnd>
3-20-2006       14:53:56.933    Error   Portal_Admin    portal.servername.plumtree       TP-Processor8   com.plumtree.portalpages.admin.editors.subpor
tal.SubPortalModel      SubPortalModel::DoTaskOnStartEditor Unable to get the stylesheet options. The following exception occured: java.lang.NullPointerExcep
tion <ptLogMsgEnd>
I see that it's using http://localhost:8080/imageserver/plumtree/common/public/css/community-themes.txt to get the community themes, which is fine, because that's our image server connection URL. I've gone to that box and done a telnet localhost 8080 / GET /imageserver/plumtree/common/public/css/community-themes.txt and it brings back the file, so I can't figure out why the portal's HTTP engine can't find it.
Any ideas?
Thanks,
Chris Bucchere | bdg | [email protected] | www.bdg-online.com

MaggieMaeMT wrote:
I'm using Photoshop Elements 5.0 and my Organizer is working fine, but all of a sudden my Editor won't open. It was working fine about 2 weeks ago.
Do you get any error messages? Also, can you launch it manually by going to the program folder with Windows Explorer and double clicking on "PhotoshopElementsEditor.exe" file? On a windows system the file is located at:
<C:\Program Files (x86)\Adobe\Photoshop elements>
Also for version 5.0 the file may be called something else.. You just need to use some guess work. You can only launch .exe files so just have a go and post back.
Hope this helps.

Problem in creation an "Experience Definition"

Hi all.
After instaling collaboration and studio, I tried to create an Experience Definition but this error appears:
Error
Error - An unexpected error occurred when trying to start the Editor.

Any idea what problem is this ?

The problem is the underscore in your server name. While it's a valid server name to most systems, Plumtree can't handle it.
I would suggest creating a host file entry on your portal server with a different name (without any hyphens or underscores) pointing to that server's IP address. Then just use that in your config entry instead of the real server name.
HTH,
Chris Bucchere | bdg | [email protected] | www.bdg-online.com

Can a user be part of two Experience Definitions?

Hi, I have two questions:
1. Is experience defintion the only way of defining a different look & feel including navigation for a set of users?
2. Can a user be part of two experience definitions? If yes, which experience definition he will see? Can the user have option to switch between two experience definitions that he is part of?
thanks
sampath

Hello Sampath,
1. No
You can use, for example, the same Exp Def but different communities, so look and feel will be still different.
Exp Def is a kind of TOP LEVEL portal object where you can define differences for look and feel. For example, this is the place where you can define different NAVIGATION or STYLES.
But it doesn't mean that Exp Def is the only place to do this. You still may want to have the same style but different portlets on default community page for different group of user. Even for navigation you can not say that Exp Def is the only place to have different navigations. For example, you can use the same Exp definition and turn off portal navigation, then you can use canvas portlet as navigation for different communities. So you may have 2 different navigations for the same Exp Def. At the same time you can still choose different way and create 2 Exp Def and use 2 different navigation. What I want to say is that you can reach the same results applying different ways.
2. Can a user be part of two experience definitions?.
Yes.
If yes, which experience definition he will see?Depends of the Exp Def rules. The first rule that validate to "true" will be applied. For example, let's say you have user that belong to group "A" and you have 2 Exp Def rules both setup as rule condition for group A:
1) Rule 1 ( user belong to group A ) --> Exp Def 1
2) Rule 2 ( user belong to group A ) --> Exp Def 2
So if this is the only condition for both rules then Rule 1 will be validate to true first, so user will be redirected to Exp Def 1 that is associated with Rule 1. Now if you change sequence of these rules to:
1) Rule 2 ( user belong to group A ) --> Exp Def 2
2) Rule 1 ( user belong to group A ) --> Exp Def 1
user will be redirected to Exp Def 2.
Of course, in real life you are going to have more conditions for rules, this is just simple example.
Dmitry
Edited by Bryazgin at 02/05/2008 7:01 AM

Can I retrieve Experience Definition properties using the PRC?

I can get the experience definition id in a portlet by using IPortletRequest.GetSubPortalID(). However, I'm wondering if I could retrieve the definition's name by using the int returned from GetSubPortalID() and pass into a different PRC method? Anyone know if I can retrieve properties of an experience definition using the PRC?

Is there any way at all for a remote portlet to get the name of the experience definition (subportal) it is being viewed from? We have multiple domains w/ portlets being shared across these domains and the portlets render different ui's based on which domain it is being viewed from.

Has anyone experience a bug with red eye correction in LR 5?

No matter what I do, anytime I try to use the red-eye correction tool, I get the message "Unable to find red eye". Even in pictures where the red eye is huge and clearly visible. Has anything changed in LR 5 that would cause this? I have Red Eye Correction enabled. Anyone else experiencing this?
I'm a rather new LR user, so I'd be grateful for someone pointing me in the right direction before I file a bug report.
Thanks!

runningkatze wrote:
Thanks Rob...
You bet .
runningkatze wrote:
In LR 4, the tools seemed so much more forgiving. In LR 5, it is incredible sensitive.
I don't think there have been any algorithmic changes in red-eye, Lr5 vs. Lr4 (certainly none mentioned by Adobe, nor in Victoria Bampton's very thorough list of changes in Lr5, nor that I've noticed in the forums...), so if it is behaving differently (you sure it's not you? ), then it sounds like something is a-wonk now in your Lr5 (or was a-wonk before in your Lr4 ).
~R.

Spaces isn't working for me correctly. Definite bug showing up

Hi,
I waited until I'd upgraded to 10.5.1 just in case this bug had been fixed but it hasn't. It's just the same in this version as before.
What my problem is is that after a short time of using Spaces (I've set 6 in total) the applications disappear from the overview preview. If for instance I have several applications running, each one allocated to it's own space 1, 2, 3, etc. When I hid F8 all but one space shows nothing in them. Even if I then click on the space that say Safari is running in (2 in my case) it's not there. I then to double check switch between applications using the application switching shortcut and suddenly there it appears in the space. This happens consistently with all my applications no matter which space they are allocated to.

Little typo: I typed: "When I hid F8 all but one space shows nothing in them"
But of course I meant Hit F8 not Hid.

Error -- 36: DEFINITE BUG

Using Snow Leopard 10.6.2, I copied 5.2g of files in a variety of folders from a FAT32 flash drive to a temp folder on my desktop. I then erased the flash drive so I could use all its capacity on a Windows machine. After erasing the temporary contents, I tried to copy the original contents back to the flash drive and received numerous "Error -- 36" messages. I have never before had any issues with the flash drive.
Like others, I tried a variety of workarounds, copying a folder at a time, using Command-C, Command-V instead of click and drag, opening the folder and selecting all the contents then pasting, etc, etc, etc. Nothing worked consistently, but I was able to force feed, bits at a time, back on to the flash drive.
However, I recently installed Windows 7 via Parallels desktop on a new iMac and was successful in copying all the files -- using iMac hardware and Windows 7 under Parallels, on to the flash drive with NO errors. In my mind, that rules out hardware issues and leaves only the OS.

The following Apple KB document describes error -36 as:
"Type -36 error (I/O Errors (bummers)
This file is having difficulty while either reading from the drive or writing to the drive. The file
may have been improperly written data to the drive or the hard drive or disk may be damaged.
This is almost always indicative of a media error (hard error on the disk). Sometimes (rarely) it is transient."
Common System Error Messages: What they Mean and What Might Help Resolve the Problem
Happy Holidays

Experience Definition question

New to 6 so try to sort my thoughts, we need to have a custom login/logout page and land the logged in user in a specific community.
1. How do I get the link to the customized login page (I need the link of login page for a reason, don't want the community link and any redirect).
2. Is this the right thing to do: Define an ED that has the community as home page and define a guest user that has the customized login/logout page.
3. What is the best way to define the ED rule? I don't want other user in our current portal to get affected.
Thanks!

I will try to provide answers in reverse order.
3. What is the best way to define the ED rule? I don't >want other user in our current portal to get affected.It depends. If you want to provide different ED's even for different guest users (for example, you want to have different look and feel for login screens) then the <only?> way to do it is to specify ED that depends on different URL.
The simplest way to check how does it work is to use portal host name for URL1 and, say, IP address (the same host) for URL 2.
So you can have different look and feel for different URL's and unsecured areas (guests).
You can even setup using SSO for ED1 and reqular AWS for ED2.
For authenticated users you can use much more different rules, like groups, administrative folders and so on.
2. Is this the right thing to do: Define an ED that has >the community as home page and define a guest user that >has the customized login/logout page.Yes, you can setup community and home page over there and use login portlet (provided by aqualogic or your own).
There is on trick here. You will need to setup "GuestRedirectToLogin" variable in portalconfig.xml file to "1". It's "0" by default an you will see standart portal login page (and you don't want this, because you need your community home page).
1. How do I get the link to the customized login page (I
need the link of login page for a reason, don't want the
community link and any redirect).I am not sure what do you exactly mean saying "customizid login page"?
You have community, there is login page over there that unsecured. This page is a community page, so this is aqualogic object. This page may be customized like any other page (layout,CSS). This page may also have LOGIN portlet that you are responsible to write (for example, by using tags) and by customizing one. There is example to do it here:
http://www.plumtreeg6.com/category/customizing-ui/
Edited by Bryazgin at 07/30/2007 4:42 PM

Bug 3042974

Was bug 3042974 resolved? If we update to ColdFusion 9.0.2, will we still experience this bug?
The bug description is: ColdFusion throws attempted duplicate class definition when accessing a web service.

Did you bother to look the bug up?
https://bugbase.adobe.com/index.cfm?event=bug&id=3042974
State Closed
Status Deferred
Reason NotEnoughTime
Adam

2.1 RC - Adjustment Brush Bug Persists

While the adjustment brush seem a bit more responsive under 2.1, I regret to report that the brush continues to apply adjustments even after I have released the left mouse button. This usually happens when I'm trying to refine the edge created by my initial selection. I've submitted a bug report to this effect.
As stated in my earlier posts, I'm running LR2.1 on a Vista Home Premium system with adequate processing power for PS CS3, 4 gigs of RAM, and plenty of HD space.
Adam

I read the release notes. They specifically said they fixed a couple of problems in the local correction area and went on to say:
>"We are still working on additional methods to improve the performance of the new Localized Correction features."
which indicates to me that they attempted to address some issues but as they did not say what issues were addressed or to what degree wouldn't it be prudent for us to keep reporting all problems that we have with LR2.1RC?
The specific issue reported in this thread may or may not have anything to do with 'performance' but it certainly has to do with the mouse--the mouse up is apparently not acknowledged until about the time the history list is updated so any brush movements between mouse up and the history updating are counted as edits. That is a definite bug and to quote Jeff in another thread about a different bug:
>Jeff Schewe:"...again you have to understand that MORE bug reports is more better...the more people wh report this as a problem the higher priority it will get. So, vote early, vote often..."
and since the LR2.1RC web site also said:
>"If you do experience an issue with this release candidate please report it to the Lightroom User to User forum."
where the phrase "User to User forum" is a link to this forum I would think the 'voting' should be done on this forum.

Experience definition bugs

Similar Messages

Maybe you are looking for