Experience for FI Aging
HI Guru's
I am thankful to all of you, i got valuable suggesion from your site.
I having 1 query on FI Aging report.......
Need balance amount in aging formate like 0-30 Balance, 31-60,
..
Here I using 3 variable .
Posting date Variable(key date) Single Value, Mandatory,
closing date Variable and due date Variable (both are key date) -- Single Value, Optional, customer exit.
2 customer exit for closingdate and due date.
So it will take input value from 3rd posting date variable.
So here 0-30 balance is CKF, which came through
0-30 open balance (RKF1) + 0-30 close balance (RKF2)
Now 0-30 Open Balance (RKF1) is
item status = 0, posting date <= key date, 0deb_cre_amt_lc, due date (key date)
Now 0-30 Close Balance (RKF2) is
cleared date > key date, 0deb_cre_amt_lc, posting date <= key date, due date (key date)
Now In my report I am getting data on Column
0-30 Open Balance
0-30 Close Balance
0-30 balance
But This Data is not aged on 0-30 Days!!!!
If I am using offset on due date like
.
due date between key date and key date +30 (in the variable offset) in RKF1 & RKF2
then data is coming for only 0-30 days (if it is there).
Suppose key date is 11.11.2006, then till 11.10.2006 date data is coming on 0-30 days column. That is right.
But when key date is 11.12.2006, then data should come in 31-60 days column, which is not coming.
Required aging???????
Message was edited by:
SSMS
Am I missing something here. If it is aging based on key date, then your calculation should go back. For example, if your key date is 11/11/2006 (dd/mm/yyyy), then you should see all transactions which falls between 11/10/2006 and 11/11/2006 (approx) for 1-30 calculation.
<u>For this variable offset should be</u>
Keydate -30;Keydate-0
<u>31 to 60 days: Offset should be</u>
Keydate-60; keydate-31
Likewise, it will go further.
Thanks
Viswa
Similar Messages
-
Did you know GamingAhead Launches the Ultimate Online Gaming Destination For All Ages.
Did you know GamingAhead Launches the Ultimate Online Gaming Destination For All Ages.
Gaming Ahead presents a video review of Prototype which is an action packed bizarrely made sandbox game. Avik Sogoyan and Michael Fam go through the games features and give their thoughts on the title. Be sure to check it out on GamingAhead.com where you will also find a full written review of the game. Prototype is not Infamous!Did you know GamingAhead Launches the Ultimate Online Gaming Destination For All Ages.
Gaming Ahead presents a video review of Prototype which is an action packed bizarrely made sandbox game. Avik Sogoyan and Michael Fam go through the games features and give their thoughts on the title. Be sure to check it out on GamingAhead.com where you will also find a full written review of the game. Prototype is not Infamous! -
V V URGENT Report for Vendor Aging
Hi ABAP Gurus,
I have to develop a report for VENDOR AGING. My requirement is i have to post an invoice. From Payment terms i have to get Dependent on posting date. Let us assume if payment term is 100 by adding posting date + payment term (100) i have to get due date. I'am giving I/P terms as Company code & Period. If i enter company code i have to get O/P as vendor name(lfa1-name1),vendor no(bsik-lifnr),bill no(bsik-xblnr),bill date(bsik-bldat) i.e., baseline date,amount(bsik-dmbtr) and duedate (this i have to pick from payment terms). For period i have to get O/P as 1st week bucket,2nd week bucket,3rd week bucket,4th week bucket and beyond. For this you have to take the difference b/n due date and that buckets based on this result you have to put that amount of rupees whether it is going to pay in 1st week r 2nd r 3rd r 4th or beyond this. If that due date is less than or equal to 1st week it has to come and fall in 1st week. THIS IS MY REQUIREMENT.
For this i'am using tables BSIK,LFA1.
Can any body send me the code on this. For this my delivery date is on monday.
Please help me on this it's very Urgent...
I will REWARD you the points definitely for those who help me on this.
my mail id : [email protected]
waiting for your VALUABLE REPLIES. Please intimate me if you send it to my mail.
Thanks and Regards,
Sundeep.Hi
See the report code and modify as per your requirements
REPORT zfi_vendor_ageing
NO STANDARD PAGE HEADING
LINE-COUNT 58
line-size 168
MESSAGE-ID zh_msg.
D A T A B A S E T A B L E S D E C L A R A T I O N
TABLES: lfa1, " Vendor Master (General)
t001, " Company Codes
rfpdo.
I N T E R N A L T A B L E S D E C L A R A T I O N S *
Internal Table for Vendor Open Items Data
DATA: BEGIN OF int_bsik OCCURS 0,
lifnr LIKE bsik-lifnr, " Vendor Number
name1 LIKE lfa1-name1, " Vendor Name
shkzg LIKE bsik-shkzg, " Dr/Cr Indicator
belnr LIKE bsik-belnr, " Document Number
xblnr LIKE bsik-xblnr, " Ref Doc No
blart LIKE bsik-blart, " Document Type
zfbdt LIKE bsik-zfbdt, " Base Line Date
zbd1t LIKE bsik-zbd1t, " Due date1
zbd2t LIKE bsik-zbd2t, " Due Date2
zbd3t LIKE bsik-zbd3t, " Due Date3
waers LIKE bsik-waers, " Currency
dmbtr LIKE bsik-dmbtr, " Amount in Local Curr
END OF int_bsik.
Internal Table for Amounts Sum Up Data
DATA: BEGIN OF int_final OCCURS 0,
lifnr LIKE bsik-lifnr, " Vendor Number
name1 LIKE lfa1-name1, " Vendor Name
total1 LIKE bsik-dmbtr, " Amount in Local Curr
total2 LIKE bsik-dmbtr, " Amount in Local Curr
total3 LIKE bsik-dmbtr, " Amount in Local Curr
total4 LIKE bsik-dmbtr, " Amount in Local Curr
total5 LIKE bsik-dmbtr, " Amount in Local Curr
total6 LIKE bsik-dmbtr, " Amount in Local Curr
total LIKE bsik-dmbtr, " Amount in Local Curr
END OF int_final.
D A T A D E C L A R A T I O N S
DATA : v_flag, " Flag
v_gtotal1 LIKE bsik-dmbtr, " Amount Totals
v_gtotal2 LIKE bsik-dmbtr, " Amount Totals
v_gtotal3 LIKE bsik-dmbtr, " Amount Totals
v_gtotal4 LIKE bsik-dmbtr, " Amount Totals
v_gtotal5 LIKE bsik-dmbtr, " Amount Totals
v_gtotal6 LIKE bsik-dmbtr, " Amount Totals
v_gtotal LIKE bsik-dmbtr, " Amount Totals
v_subtotal1 LIKE bsik-dmbtr, " Amount Totals
v_subtotal2 LIKE bsik-dmbtr, " Amount Totals
v_subtotal3 LIKE bsik-dmbtr, " Amount Totals
v_subtotal4 LIKE bsik-dmbtr, " Amount Totals
v_subtotal5 LIKE bsik-dmbtr, " Amount Totals
v_subtotal6 LIKE bsik-dmbtr, " Amount Totals
v_subtotal LIKE bsik-dmbtr, " Amount Totals
v_date LIKE bsik-zfbdt, " Due Date
v_tage1(4), " Age 30 days
v_tage2(4), " Age 60 days
v_tage3(4), " Age 90 days
v_fir(15), " Column Text1
v_sec(15), " Column Text2
v_thir(15), " Column Text3
v_four(17), " Column Text4
v_fidd(4), " Days field1
v_sedd(4), " Days field2
v_thdd(4), " Days field3
v_fodd(4), " Days field4
v_str TYPE SY-LISEL, " String
v_str1(11), " String
v_tage(3), " String
v_date1(10). " Date field
R A N G E D E C L A R A T I O N S
RANGES: r_date1 FOR bsik-zfbdt, " Date Range 1
r_date2 FOR bsik-zfbdt, " Date Range 2
r_date3 FOR bsik-zfbdt, " Date Range 3
r_date4 FOR bsik-zfbdt. " Date Range 4
S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_lifnr FOR lfa1-lifnr. "Vendor account
PARAMETERS: p_bukrs LIKE t001-bukrs. "Co. Code
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_allgst LIKE rfpdo-allgstid OBLIGATORY DEFAULT sy-datum.
"Open items at key date
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_tage1 LIKE rfpdo1-allgfael DEFAULT '30',
p_tage2 LIKE rfpdo1-allgfael DEFAULT '60',
p_tage3 LIKE rfpdo1-allgfael DEFAULT '90',
p_tage4 LIKE rfpdo1-allgfael DEFAULT '120'.
SELECTION-SCREEN END OF BLOCK b3.
A T S E L E C T I O N S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_flds.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
Fetch main data
PERFORM fetch_data.
T O P O F P A G E
Header
TOP-OF-PAGE.
PERFORM header.
E N D O F P A G E
Footer
END-OF-PAGE.
ULINE.
T O P O F P A G E D U R I N G L I N E S E L E C T I O N *
Top of Page in Secondary List
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM header1.
A T L I N E S E L E C T I O N *
AT LINE-SELECTION.
Perform Line Selections
PERFORM line_selection.
E N D O F S E L E C T I O N
END-OF-SELECTION.
List generation
PERFORM basic_list.
*& Form validate_flds
Validation of Selection Screen fields
FORM validate_flds .
Validate Vendor Code
CLEAR lfa1-lifnr.
SELECT lifnr UP TO 1 ROWS
INTO lfa1-lifnr
FROM lfa1
WHERE lifnr IN s_lifnr AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e000 WITH 'Invalid Vendor Code range'(023).
ENDIF.
Validate Company Code
CLEAR t001-bukrs.
SELECT bukrs UP TO 1 ROWS
INTO t001-bukrs
FROM t001
WHERE bukrs = p_bukrs AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e021. " Invalid Company Code range
ENDIF.
IF ( p_tage1 > p_tage2 ) OR ( p_tage1 > p_tage3 ) OR
( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 1 greater'(004)
'than Column# 2 or 3 or 4'(005).
ENDIF.
*column 2
IF ( p_tage2 > p_tage3 ) OR ( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 2 greater'(006)
'than Column# 3 or 4'(007).
ENDIF.
*column3
IF ( p_tage3 > p_tage4 ).
MESSAGE e999 WITH 'Column 3 greater'(008)
'than Column#4'(009).
ENDIF.
ENDFORM. " validate_flds
*& Form fetch_data
Fetching Data from Database Tables
FORM fetch_data .
Date Range Population
r_date1-sign = 'I'.
r_date1-option = 'BT'.
r_date1-low = p_allgst.
r_date1-high = r_date1-low + p_tage1.
APPEND r_date1.
r_date2-sign = 'I'.
r_date2-option = 'BT'.
r_date2-low = r_date1-high + 1.
r_date2-high = r_date1-low + p_tage2.
APPEND r_date2.
r_date3-sign = 'I'.
r_date3-option = 'BT'.
r_date3-low = r_date2-high + 1.
r_date3-high = r_date1-low + p_tage3.
APPEND r_date3.
r_date4-sign = 'I'.
r_date4-option = 'BT'.
r_date4-low = r_date3-high + 1.
r_date4-high = r_date1-low + p_tage4.
APPEND r_date4.
Select the Vendor Open Items data from BSIK
SELECT l~lifnr
l1~name1
b~waers
b~dmbtr
b~zfbdt
b~zbd1t
b~zbd2t
b~zbd3t
b~belnr
b~xblnr
b~shkzg
b~blart
INTO CORRESPONDING FIELDS OF TABLE int_bsik
FROM lfb1 AS l INNER JOIN lfa1 AS l1
ON llifnr = l1lifnr
INNER JOIN bsik AS b
ON llifnr = blifnr AND
lbukrs = bbukrs
WHERE l~lifnr IN s_lifnr AND
l~bukrs = p_bukrs and
b~zfbdt le p_allgst.
IF SY-SUBRC <> 0.
MESSAGE i000 WITH 'No Data found'(027).
ENDIF.
Removing the date limit to get the due items in the past
DELETE int_bsik WHERE
( blart NE 'RE' AND blart NE 'KR' ) OR
shkzg NE 'H'.
SORT int_bsik BY lifnr.
ENDFORM. " fetch_data
*& Form header
Display the Report Columns
FORM header .
v_tage1 = p_tage1 + 1.
v_tage2 = p_tage2 + 1.
v_tage3 = p_tage3 + 1.
v_fidd = p_tage1.
v_sedd = p_tage2.
v_thdd = p_tage3.
v_fodd = p_tage4.
MOVE v_fodd0(4) TO v_fodd1(3).
v_fodd+0(1) = space.
CONCATENATE '1 to'(010) v_fidd INTO v_fir.
CONCATENATE v_tage1 ' to '(011) v_sedd INTO v_sec.
CONCATENATE v_tage2 ' to '(011) v_thdd INTO v_thir.
CONCATENATE v_tage3 ' to '(011) space v_fodd INTO v_four.
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Summary of Ageing Analysis for Vendor Open Invoices as on'(013)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
FORMAT COLOR 1 INTENSIFIED.
WRITE :/1 sy-vline, 13 sy-vline, 49 sy-vline,
50(101) 'Invoices Due For(In Days)'(014) CENTERED,
151 sy-vline, 168 sy-vline .
WRITE :/1 sy-vline, 2(11) 'Vendor#'(015) CENTERED,
13 sy-vline ,14(35) 'Vendor Name'(016) CENTERED,
49 sy-vline,
50(101) sy-uline,151 sy-vline,
152(16) 'Total'(017) CENTERED,
168 sy-vline.
WRITE : /1 sy-vline,13 sy-vline, 49 sy-vline,
50(16) v_fir CENTERED, 66 sy-vline,
67(16) v_sec CENTERED, 83 sy-vline,
84(16) v_thir CENTERED, 100 sy-vline,
101(16) v_four CENTERED, 117 sy-vline,
118(16) v_str1 centered, 134 sy-vline,
135(16) 'Already Overdue'(018) CENTERED,151 sy-vline,
168 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
ENDFORM. " header
*& Form basic_list
Display the Basic List
FORM basic_list .
NEW-PAGE LINE-SIZE 168.
LOOP AT int_bsik.
CLEAR v_date.
IF int_bsik-zbd3t <> ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd3t.
ELSE.
IF int_bsik-zbd2t <> ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd2t.
ELSE.
v_date = int_bsik-zfbdt + int_bsik-zbd1t.
ENDIF.
ENDIF.
IF int_bsik-zbd1t = ' '.
v_date = int_bsik-zfbdt.
ENDIF.
IF v_date IN r_date1.
int_final-total1 = int_final-total1 + int_bsik-dmbtr.
ELSEIF v_date IN r_date2.
int_final-total2 = int_final-total2 + int_bsik-dmbtr.
ELSEIF v_date IN r_date3.
int_final-total3 = int_final-total3 + int_bsik-dmbtr.
ELSEIF v_date IN r_date4.
int_final-total4 = int_final-total4 + int_bsik-dmbtr.
ELSEif v_date > r_date4-high.
int_final-total5 = int_final-total5 + int_bsik-dmbtr.
ELSEif v_date < p_allgst.
int_final-total6 = int_final-total6 + int_bsik-dmbtr.
ENDIF.
AT END OF lifnr.
v_flag = 1.
ENDAT.
IF v_flag = 1.
int_final-lifnr = int_bsik-lifnr.
int_final-name1 = int_bsik-name1.
int_final-total = int_final-total1 + int_final-total2 +
int_final-total3 + int_final-total4 + int_final-total5 +
int_final-total6.
APPEND int_final.
v_gtotal1 = v_gtotal1 + int_final-total1.
v_gtotal2 = v_gtotal2 + int_final-total2.
v_gtotal3 = v_gtotal3 + int_final-total3.
v_gtotal4 = v_gtotal4 + int_final-total4.
v_gtotal5 = v_gtotal5 + int_final-total5.
v_gtotal6 = v_gtotal6 + int_final-total6.
v_gtotal = v_gtotal + int_final-total.
WRITE: /1 sy-vline,
2 int_final-lifnr COLOR 4 INTENSIFIED ON,
13 sy-vline,
14 int_final-name1 COLOR 4 INTENSIFIED ON,
49 sy-vline.
DATA : v_rem.
v_rem = sy-tabix MOD 2.
IF v_rem NE 0.
FORMAT COLOR 2 INTENSIFIED.
WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsik-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsik-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsik-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsik-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsik-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsik-waers,
168 sy-vline.
ELSE.
WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsik-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsik-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsik-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsik-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsik-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsik-waers,
168 sy-vline.
ENDIF.
FORMAT COLOR OFF.
HIDE int_final.
CLEAR int_final.
v_flag = 0.
ENDIF.
AT LAST.
WRITE : /1(168) sy-uline.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline, 2(47) 'GRAND TOTAL'(022) CENTERED,
49 sy-vline, 50 v_gtotal1 CURRENCY int_bsik-waers,
66 sy-vline, 67 v_gtotal2 CURRENCY int_bsik-waers,
83 sy-vline, 84 v_gtotal3 CURRENCY int_bsik-waers,
100 sy-vline,101 v_gtotal4 CURRENCY int_bsik-waers,
117 sy-vline,118 v_gtotal5 CURRENCY int_bsik-waers,
134 sy-vline,135 v_gtotal6 CURRENCY int_bsik-waers,
151 sy-vline,152 v_gtotal CURRENCY int_bsik-waers,
168 sy-vline.
HIDE : v_gtotal1,
v_gtotal2,
v_gtotal3,
v_gtotal4,
v_gtotal5,
v_gtotal6,
v_gtotal.
ENDAT.
FORMAT COLOR OFF.
ENDLOOP.
WRITE : /1(168) sy-uline.
ENDFORM. " basic_list
*& Form line_selection
When double clicked on the line display the seconday list
FORM line_selection .
NEW-PAGE LINE-SIZE 206.
Sy-lsind = 1.
DATA : v_rem,v_cnt LIKE sy-tabix.
v_cnt = 0.
SORT int_bsik BY belnr zfbdt.
LOOP AT int_bsik WHERE lifnr EQ int_final-lifnr.
v_rem = v_cnt MOD 2.
CLEAR v_date.
IF int_bsik-zbd3t <> ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd3t.
ELSE.
IF int_bsik-zbd2t <> ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd2t.
ELSE.
v_date = int_bsik-zfbdt + int_bsik-zbd1t.
ENDIF.
ENDIF.
IF int_bsik-zbd1t = ' '.
v_date = int_bsik-zfbdt.
ENDIF.
IF v_rem NE 0.
format color 2 intensified.
WRITE :/1 sy-vline, 2 int_bsik-belnr,
12 sy-vline,13 int_bsik-lifnr,
23 sy-vline,24 int_bsik-name1,
59 sy-vline,60 int_bsik-xblnr,
76 sy-vline,77 int_bsik-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline, 189 sy-vline,
190 int_bsik-dmbtr CURRENCY int_bsik-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
ENDIF.
format color off.
ELSE.
WRITE :/1 sy-vline, 2 int_bsik-belnr,
12 sy-vline,13 int_bsik-lifnr,
23 sy-vline,24 int_bsik-name1,
59 sy-vline,60 int_bsik-xblnr,
76 sy-vline,77 int_bsik-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline,189 sy-vline,
190 int_bsik-dmbtr CURRENCY int_bsik-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
ENDIF.
ENDIF.
FORMAT COLOR OFF.
v_cnt = v_cnt + 1.
ENDLOOP.
WRITE : /1(206) sy-uline.
v_subtotal = v_subtotal1 + v_subtotal2 + v_subtotal3
+ v_subtotal4 + v_subtotal5 + v_subtotal6.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline,
2(85) 'Total'(017) CENTERED CURRENCY int_bsik-waers ,
87 sy-vline,
88 v_subtotal1 CURRENCY int_bsik-waers,
104 sy-vline,
105 v_subtotal2 CURRENCY int_bsik-waers,
121 sy-vline,
122 v_subtotal3 CURRENCY int_bsik-waers,
138 sy-vline,
139 v_subtotal4 CURRENCY int_bsik-waers,
155 sy-vline,
156 v_subtotal5 CURRENCY int_bsik-waers,
172 sy-vline,
173 v_subtotal6 CURRENCY int_bsik-waers,
189 sy-vline,
190 v_subtotal CURRENCY int_bsik-waers,
206 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(206) sy-uline.
CLEAR : v_subtotal,v_subtotal1,v_subtotal2,v_subtotal3,
v_subtotal4,v_subtotal5,v_gtotal1,v_gtotal2,v_gtotal3,
v_gtotal4, v_gtotal5,v_gtotal,v_subtotal6,v_gtotal6.
ENDFORM. " line_selection
*& Form header1
Secondary List Header
FORM header1 .
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Details of Ageing Analysis for Vendor Open Invoices as on'(024)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Company'(012)
title2 = v_str.
FORMAT COLOR 1 intensified.
WRITE :/1(206) sy-uline.
WRITE :/1 sy-vline,12 sy-vline ,
23 sy-vline,59 sy-vline,76 sy-vline,87 sy-vline,
88(101) 'Invoices Due For(In Days)'(014) CENTERED,
189 sy-vline,206 sy-vline.
WRITE : /1 sy-vline, 2(10) 'Doc Number'(021) CENTERED,
12 sy-vline, 13(10) 'Vendor#'(015) CENTERED,
23 sy-vline, 24(35) 'Vendor Name'(016) CENTERED,
59 sy-vline, 60(16) 'Ref invoice#'(019) CENTERED,
76 sy-vline, 77(10) 'Inv dt'(020) CENTERED,
87 sy-vline, 88(101) sy-uline,
189 sy-vline,190(16) 'Total'(017) CENTERED,
206 sy-vline.
WRITE : /1 sy-vline, 12 sy-vline,
23 sy-vline,59 sy-vline,
76 sy-vline,87 sy-vline,
88(16) v_fir CENTERED, 104 sy-vline,
105(16) v_sec CENTERED, 121 sy-vline,
122(16) v_thir CENTERED, 138 sy-vline,
139(16) v_four CENTERED, 155 sy-vline,
156(16) v_str1 CENTERED,
172 sy-vline,
173(16) 'Already Overdue'(018) CENTERED,
189 sy-vline,
206 sy-vline.
format color off.
WRITE : /1(206) sy-uline.
ENDFORM. " header1
Reward points if useful
Regards
Anji -
Need standrad program for vendor aging report
Hi
Need standrad program for vendor aging report.
Please reply me only standrad programs.
Point are sure.
Regards,
kumarHi Pankaj
sorry to say that this is not my required program.
I need vendor aging report like s_alr_87012178 tc leads to customer aging report.
Thanks for your effort.
points are awarded.
Regards,
kumar -
I AM DEVELOPING THE Z-REPORT FOR SHELF AGEING MATERIAL
HI
USER WANTS Z-REPORT FOR SHELF AGEING MATERIAL WITH STOCK QTY AND STOCK VALUE.
I WANT TABLE NAME FOR SHELF AGEING MATERIAL REPORT.
SPECIALLY, FOR DAYS (REMAINING SHELF LIFE PERIOD FOR MATERIAL IN DYAS)Hi,
Ask the abaper to write an query from the table S032 there you can find the option of last good receipt date and the last goods issue issue date.
consider the various good mvt in between these dates calcuate the diffence betwee the current date and the last good issue date, so that you can abel to get the stock list that is not moving for more than 60 days,120 days etc
You can also use MC46, MC50, MB5M - expiration date list . In case if that does not solve their requirement then you need take logic from client and you need to develop own report
pherasath -
Standard Report for stock Aging
Hello all,
can anyone plz let us know that is there any standard report in SAP for stock aging? actually i have to see the materials quantity whose 311 movement not done after 321 and also from how many days it is pending.
Kindly help and tell how can i find those materials quantity, while user also do 311 for partial quantity?
Regards.Hi @ABAP@
Check the followings...
MB24 - Reservations for Material
MB25 - Reservations for Account Assignment
MB51 - Material Document List
MB52 - List of Warehouse Stocks on Hand MB53 - Display Plant Stock Availability
MB54 - Consignment Stocks
MB56 - Analyze Batch Where-Used List
MB57 - Build Up Batch Where-Used List
MB58 - Consgmt and Ret. Packag. at Customer
MB59 - Material Document List
MB5B - Stocks for Posting Date
MB5C - Pick-Up List
MB5L - List of Stock Values: Balances
MB5M - ShL.exp/prod.date
MB5S - Display List of GR/IR Balances
MB5W - List of Stock Values
MB9A - Analyze Archived Material Documents
MBAL - Material Documents: Read Archive
MBGR - Display Material Documents by Movement Reason
MBSI - Find Inventory Sampling
MBSM - Display Cancelled Material Documents
MMBE - Stock Overview
MD07 - Current Material Overview
MR51 - Material Line Items
MRKO - Settle Consignment/Pipeline Liabilities
MB5T - Stock in transit CC -
Our client wants a report for Inventory Ageing. (we are not using batch management)
Use tried to sell Standard report MC46 but they are not convinced with the results.
The issue is if the material is not consumed for last 399 days but today if some movement is there in that particular material, then the material is not shown as non moving. Actually the material was not at all used for last 399 days.
In mc.5 report there are key figures like last consumption, last good issue etc but the same problem is there with it.
We are trying to develop a customised report.
Please help.
Thanks in advance.Hi,
The Stock Aging Report displays the description of material that are stocked for n-number of periods at particular inventory locations( may be trading plant or manufacturing Plant). The details, which are displayed, are about the aging period for the selected items.
There are reports and T code are
MC.A ,
MC.9,
MM5B,
MMBE,
MB5M,
MC50 - Dead Stock ,
MC46 - Slow-moving items,
If the above reports not meet your requirement, you should develop your own ABAP program to meet your specific business requirement.
This is define in overall stock on value based, suppose a material is received in Feb-month, same material is received in Jan-2007 , DEC-2007 also.The total value of this inventory is say 90 lakhs, ( 30 lakhs of each month) so system will show inventory aging as below
stock aging less than 30 days, 90 lakhs
stock aging more than 30 days but below 60 days 60 lakhs
stock ageing more than 60 days but below 90 days 30 lakhs
Assuming that no issue taken place if issue is taken place, it will be deducted by default FIFO method.
You may have to develop an ABAP report.
However, look into the path: information system > logistics > inventory managment > material and explore all like MC.9,MC.A,MC.B & MC.C
Regards,
Biju K -
Customize AP Trial Balance XML Data Definition for adding Aging Buckets
Hi
I have to customize AP Trial Balance Report XML Data Definition Template for adding Aging Buckets & Supplier details in R12 , Could you let me know how i can modify XML file?
Thanks
PravinHi,
My requirement is different from the one which is in below link.
I need to add Aging Buckets & Supplier details to AP Trial Balance report (R12) , here i need to modify the XML Data definition template.
Please help me, very urgent.
Thanks
Pravin -
I recently purchased an app and clicked on another to have alook and it appears I have bought it....it is $20.99 and I don't want it as its not age appropriate for my kids. I have stopped the download for now...but is it possible not to purchase it or at least change it for an age appropriate game.
Hello Beck1717
All sales are final for as you know, there is no way to return them. However, on
the receipt you will find an invitation to report a problem. Report the situation as your problem and hope for a sympathetic hearing. They are understanding for genuine errors. -
Functional Spec for VENDOR AGE ANALYSIS report
Hi experts
I need to develope a VENDOR AGE ANALYSIS REPORT. But due to some reason i cant be able to get the Functional Specification for that object. So could you please help me by sending the above mention functional Specification.
thanks and regadrs
Pratikgot the following from sdn thread:
This is the sample report for vendor aging:
Std reports Tcodes are:
customer : s_alr_87012178
vendor : s_alr_87012084
Custom designed:
REPORT zfi_customer_ageing
NO STANDARD PAGE HEADING
LINE-COUNT 58
line-size 168
MESSAGE-ID zh_msg.
D A T A B A S E T A B L E S D E C L A R A T I O N
TABLES: kna1, " Customer Master (General)
t001, " Company Codes
rfpdo.
I N T E R N A L T A B L E S D E C L A R A T I O N S *
Internal Table for Customer Open Items Data
DATA: BEGIN OF int_bsid OCCURS 0,
kunnr LIKE bsid-kunnr, " Customer Number
name1 LIKE kna1-name1, " Customer Name
shkzg LIKE bsid-shkzg, " Dr/Cr Indicator
belnr LIKE bsid-belnr, " Document Number
xblnr LIKE bsid-xblnr, " Ref Doc No
blart LIKE bsid-blart, " Document Type
zfbdt LIKE bsid-zfbdt, " Base Line Date
zbd1t LIKE bsid-zbd1t, " Due date1
zbd2t LIKE bsid-zbd2t, " Due Date2
zbd3t LIKE bsid-zbd3t, " Due Date3
waers LIKE bsid-waers, " Currency
dmbtr LIKE bsid-dmbtr, " Amount in Local Curr
END OF int_bsid.
Internal Table for Amounts Sum Up Data
DATA: BEGIN OF int_final OCCURS 0,
kunnr LIKE bsid-kunnr, " Customer Number
name1 LIKE kna1-name1, " Customer Name
total1 LIKE bsid-dmbtr, " Amount in Local Curr
total2 LIKE bsid-dmbtr, " Amount in Local Curr
total3 LIKE bsid-dmbtr, " Amount in Local Curr
total4 LIKE bsid-dmbtr, " Amount in Local Curr
total5 LIKE bsid-dmbtr, " Amount in Local Curr
total6 LIKE bsid-dmbtr, " Amount in Local Curr
total LIKE bsid-dmbtr, " Amount in Local Curr
END OF int_final.
D A T A D E C L A R A T I O N S
DATA : v_flag, " Flag
v_gtotal1 LIKE bsid-dmbtr, " Amount Totals
v_gtotal2 LIKE bsid-dmbtr, " Amount Totals
v_gtotal3 LIKE bsid-dmbtr, " Amount Totals
v_gtotal4 LIKE bsid-dmbtr, " Amount Totals
v_gtotal5 LIKE bsid-dmbtr, " Amount Totals
v_gtotal6 LIKE bsid-dmbtr, " Amount Totals
v_gtotal LIKE bsid-dmbtr, " Amount Totals
v_subtotal1 LIKE bsid-dmbtr, " Amount Totals
v_subtotal2 LIKE bsid-dmbtr, " Amount Totals
v_subtotal3 LIKE bsid-dmbtr, " Amount Totals
v_subtotal4 LIKE bsid-dmbtr, " Amount Totals
v_subtotal5 LIKE bsid-dmbtr, " Amount Totals
v_subtotal6 LIKE bsid-dmbtr, " Amount Totals
v_subtotal LIKE bsid-dmbtr, " Amount Totals
v_date LIKE bsid-zfbdt, " Due Date
v_tage1(4), " Age 30 days
v_tage2(4), " Age 60 days
v_tage3(4), " Age 90 days
v_fir(15), " Column Text1
v_sec(15), " Column Text2
v_thir(15), " Column Text3
v_four(17), " Column Text4
v_fidd(4), " Days field1
v_sedd(4), " Days field2
v_thdd(4), " Days field3
v_fodd(4), " Days field4
v_str TYPE SY-LISEL, " String
v_str1(11), " String
v_tage(3), " String
v_date1(10). " Date field
R A N G E D E C L A R A T I O N S
RANGES: r_date1 FOR bsid-zfbdt, " Date Range 1
r_date2 FOR bsid-zfbdt, " Date Range 2
r_date3 FOR bsid-zfbdt, " Date Range 3
r_date4 FOR bsid-zfbdt. " Date Range 4
S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_kunnr FOR kna1-kunnr. "Customer account
PARAMETERS: p_bukrs LIKE t001-bukrs. "Co. Code
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_allgst LIKE rfpdo-allgstid OBLIGATORY DEFAULT sy-datum.
"Open items at key date
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_tage1 LIKE rfpdo1-allgfael DEFAULT '30',
p_tage2 LIKE rfpdo1-allgfael DEFAULT '60',
p_tage3 LIKE rfpdo1-allgfael DEFAULT '90',
p_tage4 LIKE rfpdo1-allgfael DEFAULT '120'.
SELECTION-SCREEN END OF BLOCK b3.
A T S E L E C T I O N S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_flds.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
Fetch main data
PERFORM fetch_data.
T O P O F P A G E
Header
TOP-OF-PAGE.
PERFORM header.
E N D O F P A G E
Footer
END-OF-PAGE.
ULINE.
T O P O F P A G E D U R I N G L I N E S E L E C T I O N *
Top of Page in Secondary List
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM header1.
A T L I N E S E L E C T I O N *
AT LINE-SELECTION.
Perform Line Selections
PERFORM line_selection.
E N D O F S E L E C T I O N
END-OF-SELECTION.
List generation
PERFORM basic_list.
*& Form validate_flds
Validation of Selection Screen fields
FORM validate_flds .
Validate Customer Code
CLEAR kna1-kunnr.
SELECT kunnr UP TO 1 ROWS
INTO kna1-kunnr
FROM kna1
WHERE kunnr IN s_kunnr AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc 0.
MESSAGE e000 WITH 'Invalid Customer Code range'(023).
ENDIF.
Validate Company Code
CLEAR t001-bukrs.
SELECT bukrs UP TO 1 ROWS
INTO t001-bukrs
FROM t001
WHERE bukrs = p_bukrs AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc 0.
MESSAGE e021. " Invalid Company Code range
ENDIF.
IF ( p_tage1 > p_tage2 ) OR ( p_tage1 > p_tage3 ) OR
( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 1 greater'(004)
'than Column# 2 or 3 or 4'(005).
ENDIF.
*column 2
IF ( p_tage2 > p_tage3 ) OR ( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 2 greater'(006)
'than Column# 3 or 4'(007).
ENDIF.
*column3
IF ( p_tage3 > p_tage4 ).
MESSAGE e999 WITH 'Column 3 greater'(008)
'than Column#4'(009).
ENDIF.
ENDFORM. " validate_flds
*& Form fetch_data
Fetching Data from Database Tables
FORM fetch_data .
Date Range Population
r_date1-sign = 'I'.
r_date1-option = 'BT'.
r_date1-low = p_allgst.
r_date1-high = r_date1-low + p_tage1.
APPEND r_date1.
r_date2-sign = 'I'.
r_date2-option = 'BT'.
r_date2-low = r_date1-high + 1.
r_date2-high = r_date1-low + p_tage2.
APPEND r_date2.
r_date3-sign = 'I'.
r_date3-option = 'BT'.
r_date3-low = r_date2-high + 1.
r_date3-high = r_date1-low + p_tage3.
APPEND r_date3.
r_date4-sign = 'I'.
r_date4-option = 'BT'.
r_date4-low = r_date3-high + 1.
r_date4-high = r_date1-low + p_tage4.
APPEND r_date4.
Select the Customer Open Items data from bsid
SELECT l~kunnr
l1~name1
b~waers
b~dmbtr
b~zfbdt
b~zbd1t
b~zbd2t
b~zbd3t
b~belnr
b~xblnr
b~shkzg
b~blart
INTO CORRESPONDING FIELDS OF TABLE int_bsid
FROM knb1 AS l INNER JOIN kna1 AS l1
ON lkunnr = l1kunnr
INNER JOIN bsid AS b
ON lkunnr = bkunnr AND
lbukrs = bbukrs
WHERE l~kunnr IN s_kunnr AND
l~bukrs = p_bukrs and
b~zfbdt le p_allgst.
IF SY-SUBRC 0.
MESSAGE i000 WITH 'No Data found'(027).
ENDIF.
Removing the date limit to get the due items in the past
DELETE int_bsid WHERE
( blart NE 'RE' AND blart NE 'KR' ) OR
shkzg NE 'H'.
SORT int_bsid BY kunnr.
ENDFORM. " fetch_data
*& Form header
Display the Report Columns
FORM header .
v_tage1 = p_tage1 + 1.
v_tage2 = p_tage2 + 1.
v_tage3 = p_tage3 + 1.
v_fidd = p_tage1.
v_sedd = p_tage2.
v_thdd = p_tage3.
v_fodd = p_tage4.
MOVE v_fodd0(4) TO v_fodd1(3).
v_fodd+0(1) = space.
CONCATENATE '1 to'(010) v_fidd INTO v_fir.
CONCATENATE v_tage1 ' to '(011) v_sedd INTO v_sec.
CONCATENATE v_tage2 ' to '(011) v_thdd INTO v_thir.
CONCATENATE v_tage3 ' to '(011) space v_fodd INTO v_four.
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Summary of Ageing Analysis for Customer Open Invoices as on'(013)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
FORMAT COLOR 1 INTENSIFIED.
WRITE :/1 sy-vline, 13 sy-vline, 49 sy-vline,
50(101) 'Invoices Due For(In Days)'(014) CENTERED,
151 sy-vline, 168 sy-vline .
WRITE :/1 sy-vline, 2(11) 'Customer#'(015) CENTERED,
13 sy-vline ,14(35) 'Customer Name'(016) CENTERED,
49 sy-vline,
50(101) sy-uline,151 sy-vline,
152(16) 'Total'(017) CENTERED,
168 sy-vline.
WRITE : /1 sy-vline,13 sy-vline, 49 sy-vline,
50(16) v_fir CENTERED, 66 sy-vline,
67(16) v_sec CENTERED, 83 sy-vline,
84(16) v_thir CENTERED, 100 sy-vline,
101(16) v_four CENTERED, 117 sy-vline,
118(16) v_str1 centered, 134 sy-vline,
135(16) 'Already Overdue'(018) CENTERED,151 sy-vline,
168 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
ENDFORM. " header
*& Form basic_list
Display the Basic List
FORM basic_list .
NEW-PAGE LINE-SIZE 168.
LOOP AT int_bsid.
CLEAR v_date.
IF int_bsid-zbd3t ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd3t.
ELSE.
IF int_bsid-zbd2t ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd2t.
ELSE.
v_date = int_bsid-zfbdt + int_bsid-zbd1t.
ENDIF.
ENDIF.
IF int_bsid-zbd1t = ' '.
v_date = int_bsid-zfbdt.
ENDIF.
IF v_date IN r_date1.
int_final-total1 = int_final-total1 + int_bsid-dmbtr.
ELSEIF v_date IN r_date2.
int_final-total2 = int_final-total2 + int_bsid-dmbtr.
ELSEIF v_date IN r_date3.
int_final-total3 = int_final-total3 + int_bsid-dmbtr.
ELSEIF v_date IN r_date4.
int_final-total4 = int_final-total4 + int_bsid-dmbtr.
ELSEif v_date > r_date4-high.
int_final-total5 = int_final-total5 + int_bsid-dmbtr.
ELSEif v_date < p_allgst.
int_final-total6 = int_final-total6 + int_bsid-dmbtr.
ENDIF.
AT END OF kunnr.
v_flag = 1.
ENDAT.
IF v_flag = 1.
int_final-kunnr = int_bsid-kunnr.
int_final-name1 = int_bsid-name1.
int_final-total = int_final-total1 + int_final-total2 +
int_final-total3 + int_final-total4 + int_final-total5 +
int_final-total6.
APPEND int_final.
v_gtotal1 = v_gtotal1 + int_final-total1.
v_gtotal2 = v_gtotal2 + int_final-total2.
v_gtotal3 = v_gtotal3 + int_final-total3.
v_gtotal4 = v_gtotal4 + int_final-total4.
v_gtotal5 = v_gtotal5 + int_final-total5.
v_gtotal6 = v_gtotal6 + int_final-total6.
v_gtotal = v_gtotal + int_final-total.
WRITE: /1 sy-vline,
2 int_final-kunnr COLOR 4 INTENSIFIED ON,
13 sy-vline,
14 int_final-name1 COLOR 4 INTENSIFIED ON,
49 sy-vline.
DATA : v_rem.
v_rem = sy-tabix MOD 2.
IF v_rem NE 0.
FORMAT COLOR 2 INTENSIFIED.
WRITE : 50 int_final-total1 CURRENCY int_bsid-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsid-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsid-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsid-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsid-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsid-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsid-waers,
168 sy-vline.
ELSE.
WRITE : 50 int_final-total1 CURRENCY int_bsid-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsid-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsid-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsid-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsid-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsid-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsid-waers,
168 sy-vline.
ENDIF.
FORMAT COLOR OFF.
HIDE int_final.
CLEAR int_final.
v_flag = 0.
ENDIF.
AT LAST.
WRITE : /1(168) sy-uline.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline, 2(47) 'GRAND TOTAL'(022) CENTERED,
49 sy-vline, 50 v_gtotal1 CURRENCY int_bsid-waers,
66 sy-vline, 67 v_gtotal2 CURRENCY int_bsid-waers,
83 sy-vline, 84 v_gtotal3 CURRENCY int_bsid-waers,
100 sy-vline,101 v_gtotal4 CURRENCY int_bsid-waers,
117 sy-vline,118 v_gtotal5 CURRENCY int_bsid-waers,
134 sy-vline,135 v_gtotal6 CURRENCY int_bsid-waers,
151 sy-vline,152 v_gtotal CURRENCY int_bsid-waers,
168 sy-vline.
HIDE : v_gtotal1,
v_gtotal2,
v_gtotal3,
v_gtotal4,
v_gtotal5,
v_gtotal6,
v_gtotal.
ENDAT.
FORMAT COLOR OFF.
ENDLOOP.
WRITE : /1(168) sy-uline.
ENDFORM. " basic_list
*& Form line_selection
When double clicked on the line display the seconday list
FORM line_selection .
NEW-PAGE LINE-SIZE 206.
Sy-lsind = 1.
DATA : v_rem,v_cnt LIKE sy-tabix.
v_cnt = 0.
SORT int_bsid BY belnr zfbdt.
LOOP AT int_bsid WHERE kunnr EQ int_final-kunnr.
v_rem = v_cnt MOD 2.
CLEAR v_date.
IF int_bsid-zbd3t ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd3t.
ELSE.
IF int_bsid-zbd2t ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd2t.
ELSE.
v_date = int_bsid-zfbdt + int_bsid-zbd1t.
ENDIF.
ENDIF.
IF int_bsid-zbd1t = ' '.
v_date = int_bsid-zfbdt.
ENDIF.
IF v_rem NE 0.
format color 2 intensified.
WRITE :/1 sy-vline, 2 int_bsid-belnr,
12 sy-vline,13 int_bsid-kunnr,
23 sy-vline,24 int_bsid-name1,
59 sy-vline,60 int_bsid-xblnr,
76 sy-vline,77 int_bsid-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline, 189 sy-vline,
190 int_bsid-dmbtr CURRENCY int_bsid-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsid-dmbtr.
WRITE : 88 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsid-dmbtr.
WRITE : 105 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsid-dmbtr.
WRITE : 122 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsid-dmbtr.
WRITE : 139 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsid-dmbtr.
WRITE : 156 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsid-dmbtr.
WRITE : 173 int_bsid-dmbtr CURRENCY int_bsid-waers.
ENDIF.
format color off.
ELSE.
WRITE :/1 sy-vline, 2 int_bsid-belnr,
12 sy-vline,13 int_bsid-kunnr,
23 sy-vline,24 int_bsid-name1,
59 sy-vline,60 int_bsid-xblnr,
76 sy-vline,77 int_bsid-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline,189 sy-vline,
190 int_bsid-dmbtr CURRENCY int_bsid-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsid-dmbtr.
WRITE : 88 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsid-dmbtr.
WRITE : 105 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsid-dmbtr.
WRITE : 122 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsid-dmbtr.
WRITE : 139 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsid-dmbtr.
WRITE : 156 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsid-dmbtr.
WRITE : 173 int_bsid-dmbtr CURRENCY int_bsid-waers.
ENDIF.
ENDIF.
FORMAT COLOR OFF.
v_cnt = v_cnt + 1.
ENDLOOP.
WRITE : /1(206) sy-uline.
v_subtotal = v_subtotal1 + v_subtotal2 + v_subtotal3
+ v_subtotal4 + v_subtotal5 + v_subtotal6.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline,
2(85) 'Total'(017) CENTERED CURRENCY int_bsid-waers ,
87 sy-vline,
88 v_subtotal1 CURRENCY int_bsid-waers,
104 sy-vline,
105 v_subtotal2 CURRENCY int_bsid-waers,
121 sy-vline,
122 v_subtotal3 CURRENCY int_bsid-waers,
138 sy-vline,
139 v_subtotal4 CURRENCY int_bsid-waers,
155 sy-vline,
156 v_subtotal5 CURRENCY int_bsid-waers,
172 sy-vline,
173 v_subtotal6 CURRENCY int_bsid-waers,
189 sy-vline,
190 v_subtotal CURRENCY int_bsid-waers,
206 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(206) sy-uline.
CLEAR : v_subtotal,v_subtotal1,v_subtotal2,v_subtotal3,
v_subtotal4,v_subtotal5,v_gtotal1,v_gtotal2,v_gtotal3,
v_gtotal4, v_gtotal5,v_gtotal,v_subtotal6,v_gtotal6.
ENDFORM. " line_selection
*& Form header1
Secondary List Header
FORM header1 .
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Details of Ageing Analysis for Customer Open Invoices as on'(024)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR 1 intensified.
WRITE :/1(206) sy-uline.
WRITE :/1 sy-vline,12 sy-vline ,
23 sy-vline,59 sy-vline,76 sy-vline,87 sy-vline,
88(101) 'Invoices Due For(In Days)'(014) CENTERED,
189 sy-vline,206 sy-vline.
WRITE : /1 sy-vline, 2(10) 'Doc Number'(021) CENTERED,
12 sy-vline, 13(10) 'Customer#'(015) CENTERED,
23 sy-vline, 24(35) 'Customer Name'(016) CENTERED,
59 sy-vline, 60(16) 'Ref invoice#'(019) CENTERED,
76 sy-vline, 77(10) 'Inv dt'(020) CENTERED,
87 sy-vline, 88(101) sy-uline,
189 sy-vline,190(16) 'Total'(017) CENTERED,
206 sy-vline.
WRITE : /1 sy-vline, 12 sy-vline,
23 sy-vline,59 sy-vline,
76 sy-vline,87 sy-vline,
88(16) v_fir CENTERED, 104 sy-vline,
105(16) v_sec CENTERED, 121 sy-vline,
122(16) v_thir CENTERED, 138 sy-vline,
139(16) v_four CENTERED, 155 sy-vline,
156(16) v_str1 CENTERED,
172 sy-vline,
173(16) 'Already Overdue'(018) CENTERED,
189 sy-vline,
206 sy-vline.
format color off.
WRITE : /1(206) sy-uline.
ENDFORM. " header1
REPORT zfi_vendor_ageing
NO STANDARD PAGE HEADING
LINE-COUNT 58
line-size 168
MESSAGE-ID zh_msg.
Report Name : Vendor Open Items Ageing Report
Purpose : This report displays the Vendor Open Items based on
different Ageing days (Calculated by taking the Base
Line date and the days mentioned in Payment Terms)
M O D I F I C A T I O N L O G
Date | Change Number | Initials | Description
30-Aug-2004 | DTSK900**** | Anji Reddy | Initial
D A T A B A S E T A B L E S D E C L A R A T I O N
TABLES: lfa1, " Vendor Master (General)
t001, " Company Codes
rfpdo.
I N T E R N A L T A B L E S D E C L A R A T I O N S *
Internal Table for Vendor Open Items Data
DATA: BEGIN OF int_bsik OCCURS 0,
lifnr LIKE bsik-lifnr, " Vendor Number
name1 LIKE lfa1-name1, " Vendor Name
shkzg LIKE bsik-shkzg, " Dr/Cr Indicator
belnr LIKE bsik-belnr, " Document Number
xblnr LIKE bsik-xblnr, " Ref Doc No
blart LIKE bsik-blart, " Document Type
zfbdt LIKE bsik-zfbdt, " Base Line Date
zbd1t LIKE bsik-zbd1t, " Due date1
zbd2t LIKE bsik-zbd2t, " Due Date2
zbd3t LIKE bsik-zbd3t, " Due Date3
waers LIKE bsik-waers, " Currency
dmbtr LIKE bsik-dmbtr, " Amount in Local Curr
END OF int_bsik.
Internal Table for Amounts Sum Up Data
DATA: BEGIN OF int_final OCCURS 0,
lifnr LIKE bsik-lifnr, " Vendor Number
name1 LIKE lfa1-name1, " Vendor Name
total1 LIKE bsik-dmbtr, " Amount in Local Curr
total2 LIKE bsik-dmbtr, " Amount in Local Curr
total3 LIKE bsik-dmbtr, " Amount in Local Curr
total4 LIKE bsik-dmbtr, " Amount in Local Curr
total5 LIKE bsik-dmbtr, " Amount in Local Curr
total6 LIKE bsik-dmbtr, " Amount in Local Curr
total LIKE bsik-dmbtr, " Amount in Local Curr
END OF int_final.
D A T A D E C L A R A T I O N S
DATA : v_flag, " Flag
v_gtotal1 LIKE bsik-dmbtr, " Amount Totals
v_gtotal2 LIKE bsik-dmbtr, " Amount Totals
v_gtotal3 LIKE bsik-dmbtr, " Amount Totals
v_gtotal4 LIKE bsik-dmbtr, " Amount Totals
v_gtotal5 LIKE bsik-dmbtr, " Amount Totals
v_gtotal6 LIKE bsik-dmbtr, " Amount Totals
v_gtotal LIKE bsik-dmbtr, " Amount Totals
v_subtotal1 LIKE bsik-dmbtr, " Amount Totals
v_subtotal2 LIKE bsik-dmbtr, " Amount Totals
v_subtotal3 LIKE bsik-dmbtr, " Amount Totals
v_subtotal4 LIKE bsik-dmbtr, " Amount Totals
v_subtotal5 LIKE bsik-dmbtr, " Amount Totals
v_subtotal6 LIKE bsik-dmbtr, " Amount Totals
v_subtotal LIKE bsik-dmbtr, " Amount Totals
v_date LIKE bsik-zfbdt, " Due Date
v_tage1(4), " Age 30 days
v_tage2(4), " Age 60 days
v_tage3(4), " Age 90 days
v_fir(15), " Column Text1
v_sec(15), " Column Text2
v_thir(15), " Column Text3
v_four(17), " Column Text4
v_fidd(4), " Days field1
v_sedd(4), " Days field2
v_thdd(4), " Days field3
v_fodd(4), " Days field4
v_str TYPE SY-LISEL, " String
v_str1(11), " String
v_tage(3), " String
v_date1(10). " Date field
R A N G E D E C L A R A T I O N S
RANGES: r_date1 FOR bsik-zfbdt, " Date Range 1
r_date2 FOR bsik-zfbdt, " Date Range 2
r_date3 FOR bsik-zfbdt, " Date Range 3
r_date4 FOR bsik-zfbdt. " Date Range 4
S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_lifnr FOR lfa1-lifnr. "Vendor account
PARAMETERS: p_bukrs LIKE t001-bukrs. "Co. Code
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_allgst LIKE rfpdo-allgstid OBLIGATORY DEFAULT sy-datum.
"Open items at key date
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_tage1 LIKE rfpdo1-allgfael DEFAULT '30',
p_tage2 LIKE rfpdo1-allgfael DEFAULT '60',
p_tage3 LIKE rfpdo1-allgfael DEFAULT '90',
p_tage4 LIKE rfpdo1-allgfael DEFAULT '120'.
SELECTION-SCREEN END OF BLOCK b3.
A T S E L E C T I O N S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_flds.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
Fetch main data
PERFORM fetch_data.
T O P O F P A G E
Header
TOP-OF-PAGE.
PERFORM header.
E N D O F P A G E
Footer
END-OF-PAGE.
ULINE.
T O P O F P A G E D U R I N G L I N E S E L E C T I O N *
Top of Page in Secondary List
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM header1.
A T L I N E S E L E C T I O N *
AT LINE-SELECTION.
Perform Line Selections
PERFORM line_selection.
E N D O F S E L E C T I O N
END-OF-SELECTION.
List generation
PERFORM basic_list.
*& Form validate_flds
Validation of Selection Screen fields
FORM validate_flds .
Validate Vendor Code
CLEAR lfa1-lifnr.
SELECT lifnr UP TO 1 ROWS
INTO lfa1-lifnr
FROM lfa1
WHERE lifnr IN s_lifnr AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc 0.
MESSAGE e000 WITH 'Invalid Vendor Code range'(023).
ENDIF.
Validate Company Code
CLEAR t001-bukrs.
SELECT bukrs UP TO 1 ROWS
INTO t001-bukrs
FROM t001
WHERE bukrs = p_bukrs AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc 0.
MESSAGE e021. " Invalid Company Code range
ENDIF.
IF ( p_tage1 > p_tage2 ) OR ( p_tage1 > p_tage3 ) OR
( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 1 greater'(004)
'than Column# 2 or 3 or 4'(005).
ENDIF.
*column 2
IF ( p_tage2 > p_tage3 ) OR ( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 2 greater'(006)
'than Column# 3 or 4'(007).
ENDIF.
*column3
IF ( p_tage3 > p_tage4 ).
MESSAGE e999 WITH 'Column 3 greater'(008)
'than Column#4'(009).
ENDIF.
ENDFORM. " validate_flds
*& Form fetch_data
Fetching Data from Database Tables
FORM fetch_data .
Date Range Population
r_date1-sign = 'I'.
r_date1-option = 'BT'.
r_date1-low = p_allgst.
r_date1-high = r_date1-low + p_tage1.
APPEND r_date1.
r_date2-sign = 'I'.
r_date2-option = 'BT'.
r_date2-low = r_date1-high + 1.
r_date2-high = r_date1-low + p_tage2.
APPEND r_date2.
r_date3-sign = 'I'.
r_date3-option = 'BT'.
r_date3-low = r_date2-high + 1.
r_date3-high = r_date1-low + p_tage3.
APPEND r_date3.
r_date4-sign = 'I'.
r_date4-option = 'BT'.
r_date4-low = r_date3-high + 1.
r_date4-high = r_date1-low + p_tage4.
APPEND r_date4.
Select the Vendor Open Items data from BSIK
SELECT l~lifnr
l1~name1
b~waers
b~dmbtr
b~zfbdt
b~zbd1t
b~zbd2t
b~zbd3t
b~belnr
b~xblnr
b~shkzg
b~blart
INTO CORRESPONDING FIELDS OF TABLE int_bsik
FROM lfb1 AS l INNER JOIN lfa1 AS l1
ON llifnr = l1lifnr
INNER JOIN bsik AS b
ON llifnr = blifnr AND
lbukrs = bbukrs
WHERE l~lifnr IN s_lifnr AND
l~bukrs = p_bukrs and
b~zfbdt le p_allgst.
IF SY-SUBRC 0.
MESSAGE i000 WITH 'No Data found'(027).
ENDIF.
Removing the date limit to get the due items in the past
DELETE int_bsik WHERE
( blart NE 'RE' AND blart NE 'KR' ) OR
shkzg NE 'H'.
SORT int_bsik BY lifnr.
ENDFORM. " fetch_data
*& Form header
Display the Report Columns
FORM header .
v_tage1 = p_tage1 + 1.
v_tage2 = p_tage2 + 1.
v_tage3 = p_tage3 + 1.
v_fidd = p_tage1.
v_sedd = p_tage2.
v_thdd = p_tage3.
v_fodd = p_tage4.
MOVE v_fodd0(4) TO v_fodd1(3).
v_fodd+0(1) = space.
CONCATENATE '1 to'(010) v_fidd INTO v_fir.
CONCATENATE v_tage1 ' to '(011) v_sedd INTO v_sec.
CONCATENATE v_tage2 ' to '(011) v_thdd INTO v_thir.
CONCATENATE v_tage3 ' to '(011) space v_fodd INTO v_four.
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Summary of Ageing Analysis for Vendor Open Invoices as on'(013)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
FORMAT COLOR 1 INTENSIFIED.
WRITE :/1 sy-vline, 13 sy-vline, 49 sy-vline,
50(101) 'Invoices Due For(In Days)'(014) CENTERED,
151 sy-vline, 168 sy-vline .
WRITE :/1 sy-vline, 2(11) 'Vendor#'(015) CENTERED,
13 sy-vline ,14(35) 'Vendor Name'(016) CENTERED,
49 sy-vline,
50(101) sy-uline,151 sy-vline,
152(16) 'Total'(017) CENTERED,
168 sy-vline.
WRITE : /1 sy-vline,13 sy-vline, 49 sy-vline,
50(16) v_fir CENTERED, 66 sy-vline,
67(16) v_sec CENTERED, 83 sy-vline,
84(16) v_thir CENTERED, 100 sy-vline,
101(16) v_four CENTERED, 117 sy-vline,
118(16) v_str1 centered, 134 sy-vline,
135(16) 'Already Overdue'(018) CENTERED,151 sy-vline,
168 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
ENDFORM. " header
*& Form basic_list
Display the Basic List
FORM basic_list .
NEW-PAGE LINE-SIZE 168.
LOOP AT int_bsik.
CLEAR v_date.
IF int_bsik-zbd3t ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd3t.
ELSE.
IF int_bsik-zbd2t ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd2t.
ELSE.
v_date = int_bsik-zfbdt + int_bsik-zbd1t.
ENDIF.
ENDIF.
IF int_bsik-zbd1t = ' '.
v_date = int_bsik-zfbdt.
ENDIF.
IF v_date IN r_date1.
int_final-total1 = int_final-total1 + int_bsik-dmbtr.
ELSEIF v_date IN r_date2.
int_final-total2 = int_final-total2 + int_bsik-dmbtr.
ELSEIF v_date IN r_date3.
int_final-total3 = int_final-total3 + int_bsik-dmbtr.
ELSEIF v_date IN r_date4.
int_final-total4 = int_final-total4 + int_bsik-dmbtr.
ELSEif v_date > r_date4-high.
int_final-total5 = int_final-total5 + int_bsik-dmbtr.
ELSEif v_date < p_allgst.
int_final-total6 = int_final-total6 + int_bsik-dmbtr.
ENDIF.
AT END OF lifnr.
v_flag = 1.
ENDAT.
IF v_flag = 1.
int_final-lifnr = int_bsik-lifnr.
int_final-name1 = int_bsik-name1.
int_final-total = int_final-total1 + int_final-total2 +
int_final-total3 + int_final-total4 + int_final-total5 +
int_final-total6.
APPEND int_final.
v_gtotal1 = v_gtotal1 + int_final-total1.
v_gtotal2 = v_gtotal2 + int_final-total2.
v_gtotal3 = v_gtotal3 + int_final-total3.
v_gtotal4 = v_gtotal4 + int_final-total4.
v_gtotal5 = v_gtotal5 + int_final-total5.
v_gtotal6 = v_gtotal6 + int_final-total6.
v_gtotal = v_gtotal + int_final-total.
WRITE: /1 sy-vline,
2 int_final-lifnr COLOR 4 INTENSIFIED ON,
13 sy-vline,
14 int_final-name1 COLOR 4 INTENSIFIED ON,
49 sy-vline.
DATA : v_rem.
v_rem = sy-tabix MOD 2.
IF v_rem NE 0.
FORMAT COLOR 2 INTENSIFIED.
WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsik-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsik-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsik-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsik-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsik-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsik-waers,
168 sy-vline.
ELSE.
WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsik-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsik-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsik-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsik-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsik-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsik-waers,
168 sy-vline.
ENDIF.
FORMAT COLOR OFF.
HIDE int_final.
CLEAR int_final.
v_flag = 0.
ENDIF.
AT LAST.
WRITE : /1(168) sy-uline.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline, 2(47) 'GRAND TOTAL'(022) CENTERED,
49 sy-vline, 50 v_gtotal1 CURRENCY int_bsik-waers,
66 sy-vline, 67 v_gtotal2 CURRENCY int_bsik-waers,
83 sy-vline, 84 v_gtotal3 CURRENCY int_bsik-waers,
100 sy-vline,101 v_gtotal4 CURRENCY int_bsik-waers,
117 sy-vline,118 v_gtotal5 CURRENCY int_bsik-waers,
134 sy-vline,135 v_gtotal6 CURRENCY int_bsik-waers,
151 sy-vline,152 v_gtotal CURRENCY int_bsik-waers,
168 sy-vline.
HIDE : v_gtotal1,
v_gtotal2,
v_gtotal3,
v_gtotal4,
v_gtotal5,
v_gtotal6,
v_gtotal.
ENDAT.
FORMAT COLOR OFF.
ENDLOOP.
WRITE : /1(168) sy-uline.
ENDFORM. " basic_list
*& Form line_selection
When double clicked on the line display the seconday list
FORM line_selection .
NEW-PAGE LINE-SIZE 206.
Sy-lsind = 1.
DATA : v_rem,v_cnt LIKE sy-tabix.
v_cnt = 0.
SORT int_bsik BY belnr zfbdt.
LOOP AT int_bsik WHERE lifnr EQ int_final-lifnr.
v_rem = v_cnt MOD 2.
CLEAR v_date.
IF int_bsik-zbd3t ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd3t.
ELSE.
IF int_bsik-zbd2t ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd2t.
ELSE.
v_date = int_bsik-zfbdt + int_bsik-zbd1t.
ENDIF.
ENDIF.
IF int_bsik-zbd1t = ' '.
v_date = int_bsik-zfbdt.
ENDIF.
IF v_rem NE 0.
format color 2 intensified.
WRITE :/1 sy-vline, 2 int_bsik-belnr,
12 sy-vline,13 int_bsik-lifnr,
23 sy-vline,24 int_bsik-name1,
59 sy-vline,60 int_bsik-xblnr,
76 sy-vline,77 int_bsik-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline, 189 sy-vline,
190 int_bsik-dmbtr CURRENCY int_bsik-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
ENDIF.
format color off.
ELSE.
WRITE :/1 sy-vline, 2 int_bsik-belnr,
12 sy-vline,13 int_bsik-lifnr,
23 sy-vline,24 int_bsik-name1,
59 sy-vline,60 int_bsik-xblnr,
76 sy-vline,77 int_bsik-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline,189 sy-vline,
190 int_bsik-dmbtr CURRENCY int_bsik-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
ENDIF.
ENDIF.
FORMAT COLOR OFF.
v_cnt = v_cnt + 1.
ENDLOOP.
WRITE : /1(206) sy-uline.
v_subtotal = v_subtotal1 + v_subtotal2 + v_subtotal3
+ v_subtotal4 + v_subtotal5 + v_subtotal6.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline,
2(85) 'Total'(017) CENTERED CURRENCY int_bsik-waers ,
87 sy-vline,
88 v_subtotal1 CURRENCY int_bsik-waers,
104 sy-vline,
105 v_subtotal2 CURRENCY int_bsik-waers,
121 sy-vline,
122 v_subtotal3 CURRENCY int_bsik-waers,
138 sy-vline,
139 v_subtotal4 CURRENCY int_bsik-waers,
155 sy-vline,
156 v_subtotal5 CURRENCY int_bsik-waers,
172 sy-vline,
173 v_subtotal6 CURRENCY int_bsik-waers,
189 sy-vline,
190 v_subtotal CURRENCY int_bsik-waers,
206 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(206) sy-uline.
CLEAR : v_subtotal,v_subtotal1,v_subtotal2,v_subtotal3,
v_subtotal4,v_subtotal5,v_gtotal1,v_gtotal2,v_gtotal3,
v_gtotal4, v_gtotal5,v_gtotal,v_subtotal6,v_gtotal6.
ENDFORM. " line_selection
*& Form header1
Secondary List Header
FORM header1 .
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Details of Ageing Analysis for Vendor Open Invoices as on'(024)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR 1 intensified.
WRITE :/1(206) sy-uline.
WRITE :/1 sy-vline,12 sy-vline ,
23 sy-vline,59 sy-vline,76 sy-vline,87 sy-vline,
88(101) 'Invoices Due For(In Days)'(014) CENTERED,
189 sy-vline,206 sy-vline.
WRITE : /1 sy-vline, 2(10) 'Doc Number'(021) CENTERED,
12 sy-vline, 13(10) 'Vendor#'(015) CENTERED,
23 sy-vline, 24(35) 'Vendor Name'(016) CENTERED,
59 sy-vline, 60(16) 'Ref invoice#'(019) CENTERED,
76 sy-vline, 77(10) 'Inv dt'(020) CENTERED,
87 sy-vline, 88(101) sy-uline,
189 sy-vline,190(16) 'Total'(017) CENTERED,
206 sy-vline.
WRITE : /1 sy-vline, 12 sy-vline,
23 sy-vline,59 sy-vline,
76 sy-vline,87 sy-vline,
88(16) v_fir CENTERED, 104 sy-vline,
105(16) v_sec CENTERED, 121 sy-vline,
122(16) v_thir CENTERED, 138 sy-vline,
139(16) v_four CENTERED, 155 sy-vline,
156(16) v_str1 CENTERED,
172 sy-vline,
173(16) 'Already Overdue'(018) CENTERED,
189 sy-vline,
206 sy-vline.
format color off.
WRITE : /1(206) sy-uline.
ENDFORM. " header1
The below link will give Tables & Relations.
http://www.erpgenie.com/abap/tables.htm
http://goldenink.com/abap/files_in_sap.html
http://abap4.tripod.com/SAP_Tables.html
http://www.geocities.com/sapcircle/Relations.pdf
regards,
indranil -
Extractor for AR aging report ?
Can anybody tell me if there is a standard extractor for this query ?
I would also appreciate if you can tell me what we can get out of this report.
Thanks,
Rishi.Hi Rishi
Use following for AR aging report (All business content objects)
Data source: 0FI_AR_4
Info cube: 0FIAR_C03
Query :0FIAR_C03_Q0005
Hope this helps
Regards
Pradip -
How to consider internal transfer movement for material aging Z report
Hello Expert ,
we are developing Z repot for material ageing .
In this we are using BSIM table but in our case internal transfer movement such as ( 411 ,412 ,413 ,etc.) create debit credit entry in BSIM for this reason value of material getting correct but age of material get disturbed .
we are having sale order stock (E), WBS stock(Q) , Collective stock , Vendor Stock (o) & stock transfer between stock type possible.
For all above consideration how to calculate material Age.Dear experts
i have the same issue, could you pls advise the answer?
another question; how to unify the stock locations rather than maintaining different locations such as sales order stock, free goods, commercial stock and in the same time the margin reporting to be based on transaction/line item in sales invoice?
thanks -
Hi all,
Is there any standard report for production aging,i have searched forum but not available.
Regards,
phani.Dear,
There is no standard report in SAP you need to develop your own custom report.
Regards,
R.Brahmankar -
Report MC46 & MC50 for Inv Aging
Dear Friends,
To get the inventory aging report I am using report MC46.
What is the significance of last column "Days since consumpti" & "date".
The days showing does not match with the difference between today's date & the date of last consumption.
It is abruptly taking the date.
What is the difference between report MC46 & MC50.
These are not considering batches of materials.
Is there any other standard report for inventory aging?
Regardsfor what purpose do you need the age of a batch?
if for quality reasons, then your material master and the batches should have shelf life data. then you can run MB5M transaction to monitor shelf life.
Further you can use BMBC to analyse batches according to last GR date or manufacturing date and many other options.
Please give an example for your last consumption date problem in MC46. what is your last consumption date, from where did you take this info and how many days since last consumption are shown in MC46?
Here you can find docu to dead stock :
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c1/37620d449a11d188fe0000e8322f96/content.htm
and to slow moving items:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c1/3761bf449a11d188fe0000e8322f96/content.htm -
Better user experience for slow reports (loading in background, progressbar
Hi
In our application, some reports take a long time till they are displayed. Therefore it would be nice, if i could provide the user with some feedback (example: progressbar). Is it possible to have this? Upon print, when a pdf file is being constructed (in web) we already have such functionality in place, is it possible to have it generally?
Mayb,e it would also be possible to have the report load the first page quickly, so the user has already something to look at, and load all the other needed data in a background thread. (i dont think it is possible, however, somebody may have an idea)
Does anybody have an idea how we could achieve a better user experience for our reports. Any help is appreciated. Thanks.
Greetings
I am using:
Crystal Reports 2008 (in Asp.net, Windows Forms)
Version .NET 3.5 (SP1)
PS: of course a very fast report would be the finest solution. However, i guess this will not be possible with our reports and the volume of data they accessHi Daniel,
Crystal Report 2008 we have a inbuilt functionality of progress bar .If you are not getting progress bar for every report that means those reports are not taking to much time.
For more info regarding progressbar this check this link:
[https://boc.sdn.sap.com/node/8035]
Look for processingIndicatorDelay and processingIndicatorText.
If you want to improve performance of report then we need to keep in mind few thing while creating report in Crystal report designer:
Here are a few points related to performance issue .
The performance of a report is related to:
External factors:
1. The amount of time the database server takes to process the SQL query.
( Crystal Reports send the SQL query to the database, the database process it, and returns the data set to Crystal Reports. )
2. Network traffics.
3. Local computer processor speed.
( When Crystal Reports receives the data set, it generates a temp file to further filter the data when necessary, as well as to group, sort, process formulas, ... )
4. The number of records returned
( If a SQL query returns a large number of records, it will take longer to format and display than if was returning a smaller data set.)
Report design:
1. Where is the Record Selection evaluated?
Ensure your Record Selection Formula can be translated in SQL, so the data can be filter down on the server, otherwise the filtering will be done in a temp file on the local machine which will be much slower.
They have many functions that cannot be translated in SQL because they may not have a standard SQL for it.
For example, control structure like IF THEN ELSE cannot be translated into SQL. It will always be evaluated
in Crystal Reports. But if you use an IF THEN ELSE on a parameter, it will convert the result of the condition to
SQL, but as soon as uses database fileds in the conditions it will not be translated in SQL.
2. How many subreports the report contains and in section section they are located.
Minimise the number of subreports used, or avoid using subreports if possible because
subreports are reports within a report, and if you have a subreport in a details section, and the report returns 100
records, the subreport will be evaluated 100 times, so it will query the database 100 times. It is often the biggest
factor why a report takes a long time to preview.
3. How many records will be returned to the report.
Large number of records will slow down the preview of the reports. Ensure you only returns the necessary data on the report, by creating a Record Selection Formula, or basing your report off a Stored Procedure, or a Command Object that only returns the desired data set.
4. Do you use the special field "Page N of M", or "TotalPageCount"
When the special field "Page N of M" or "TotalPageCount" is used on a report, it will have to generate each page
of the report before it displays the first page, therfore it will take more time to display the first page of the report.
If you want to improve the speed of a report, remove the special field "Page N of M" or "Total Page Count" or formula that uses the function "TotalPageCount". If those aren't use when you view a report it only format the page requested. It won't format the whole report.
5. Link tables on indexed fields whenever possible.
6. Remove unused tables, unused formulas, unused running totals from the report.
7. Suppress unnecessary sections.
8. For summaries, use conditional formulas instead of running totals when possible.
9. Whenever possible, limit records through selection, not suppression.
10. Use SQL expressions to convert fields to be used in record selection instead of using formula functions.
For example, if you need to concatenate 2 fields together, instead of doing it in a formula, you can create a SQL Expression Field. It will concatenate the fields on the database server, instead of doing in Crystal Reports.
SQL Expression Fields are added to the SELECT clause of the SQL Query send to the database.
11. Using one command as the datasource can be faster if you returns only the desired data set. It can be faster if the SQL query written only return the desired data.
12. Perform grouping on server
This is only relevant if you only need to return the summary to your report but not the details. It will be faster as less data will be returned to the reports.
Hope this helps!!
Regards,
Shweta
Maybe you are looking for
-
MBP screen black after using DVI to HDMI cable
Over a week ago I attempted to connect my MBP 2007 model to my samsung television with HDMI in. I have used this cable before but always have trouble getting it to work with this TV and my computer. Well, I plugged it in and the screen on my computer
-
Folio Builder Panel on 2nd Monitor Crashing Indesign
I am not sure if this question is appropriate in this forum or the indesign forum, but Ill start here. I keep all my indesign palettes on a second monitor, and now everytime I open Indesign it repeatedly crashes unless I do a fresh open after delete
-
Hi Experts Can we mention two prices for One Material for same Sales organization ,distribution channel , site division ? (e.g. in plant there is two material one material they want to sale at one price say $ 1 and another material they
-
I received a request from Adobe upon booting to install a Flash security update. I did and when I went to a media website, it said I did not have Flash and needed to download. I then went to Adobe.com and tried to download Flash but it kept freezing
-
Hi, I would like to know if any of your knows a Point Of Sale add-on for SBO. Thank you, Irina