Experience Manager 3.1.1 : Deploy to live only an experience (not all)

Hi everyone,
We are migrating right now from PageBuilder to Experience Manager.
We have now a dedicated team to manage every category of our website.
By default, we can only deploy from authoring to live all rules/experience.
Because different people works on different category, we would like to push only a rule (not all the rules).
Is it possible technicaly and supported ?
Thanks,
Alex

Interesting use case, I would also like to know if/how this is possible.
Pankaj.

Similar Messages

Custom master page issue only some pages not all (spwebpart manager)

Hi i am using html custom master page in sharepoint 2013, In my search page (home) working properly without any issue,
But in my Result.aspx page showing below error.
A WebPartZone can only exist on a page which contains a SPWebPartManager. The SPWebPartManager must be placed before any WebPartZones on the page.
How to solve this? Thanks in advance

There are 4 web parts in this page
1.Refinement
2.Search Box
3.Search Navigation
4.Search Results

BAM Deployment error - Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. --- Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server "ServerName".

HI,
I am getting below error while deploying BAM activity ...Pls help me resolve this issue.
Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. ---> Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server
"ServerName". ---> System.Data.SqlClient.SqlException: An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or
[] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed.
Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias
to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An
object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column
name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing
or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For
SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements,
verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column
has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For
other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements,
look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock,
Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at
System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean
sendToPipe, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteBatches(String cmdText) at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String
cmdText, CommandType cmdType, Boolean inTransaction, Transaction transaction) --- End of inner exception stack trace --- at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String cmdText, CommandType cmdType, Boolean inTransaction,
Transaction transaction) at Microsoft.BizTalk.Bam.Management.ViewModule.Create(XmlDocument defXmlDoc) at Microsoft.BizTalk.Bam.Management.WorkerModule.DispatchOperation(OperationType operation, XmlDocument defXmlDoc) at
Microsoft.BizTalk.Bam.Management.BamManager.ProcessOneBamArtifactType(BamArtifactType bamArtifact, OperationType operation) at Microsoft.BizTalk.Bam.Management.BamManager.ManageInfrastructure(OperationType operation) at Microsoft.BizTalk.Bam.Management.BamManager.Deploy()
--- End of inner exception stack trace --- at Microsoft.BizTalk.Bam.Management.BamManager.Deploy() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.HandleDeployAll() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.DispatchCommand()
at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Run() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Main(String[] args)

Your View Name, OLAP Cube Name and certain other restrictions listed @http://msdn.microsoft.com/en-us/library/aa561577.aspx
Please review your BAM Definitons.
Regards.

How to manage the tables after deploying an SDA for Oracle

How can I manage the tables after deploying an SDA on Oracle.There is tool for MaxDB,but how can I connection to the Oracle Database?
Thanks

In J2ee administrator console

When converting over to HTTPS and PKI for clients, not all actions are available in configuration manager cpl

I'm not exactly sure which forum heading this should go under so if this isn't correct please let me know or move it on my behalf.
So I am trying to setup Internet Based Client Management in SCCM 2012 R2 and have come across a few articles on how to do so. I think I have mostly gotten it to work but I seem to be having a client issue when deploying new machines. My already
deployed servers seem to have picked up the PKI setting no problem. In the past when I would deploy a new windows client everything would be fine. When i converted over to PKI in my test environment I am now having issues when I go to deploy a
new windows client. I don't get all of the Actions listed in the Configuration Manager control panel. All I have are Discovery Data Collection, Machine Policy Retrieval and Eval, User Policy Retrieval and Eval, and Windows Installer Source list Update
Cycles, before all of them would populate no problem. I have let this machine sit here for several hours and nothing has changed yet. It does say PKI for client certificate. Sometimes when I would deploy new machines it would say NONE for
Client certificate. In my production environment it says self-signed. I have found if i uninstall the client and re-install the client it does populate all of the cycles but I don't understand why it is not working on deployment.
Ok so maybe not all the time that when i reinstall the client it fixes it. I just did an uninstall and reinstall on a test client and all it has under actions are machine and user policy cycles.
Does anyone have any ideas?

Hi,
I think SCCM client installed before the GPO applied, so you don't a certificate available when it is required.
You can export and import the certificate by using MDT integration, try this blog for PKI part:
How To: Build and Capture in Configuration Manager 2012 using HTTPS
And in addition, you can upload the log to your onedrive so you can share with us.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Boot Camp 3.0 and Windows 7 64-bit - My experiences/notes

I just installed Boot Camp 3.0 from the Snow Leopard DVD onto my MacBook Pro 17 (Mid 09) which is running Windows 7 64bit RTM and had Boot Camp 2.1 previously installed on it.
My experiences/notes:
1. The Boot Camp 3.0 installation automatically removed the Boot Camp 2.1 drivers that it was going to update and then installed the newer 3.0 ones
2. You still can only use the GeForce 9600M GT graphics chipset, i.e. only the 9600M GT shows to windows and appears in the device manager
3. Deferred Procedure Calls (DPC) Latency issues still exist although it doesn't seem like you need to run the Bootcamp.exe on CPU 0 affinity only (Bootcamp.exe = the updated/Boot Camp 3.0 version of KbdMgr.exe)
4. You still can't fully dim the keyboard backlight with the F5 key
5. I manually updated the 'important' drivers to the very newest one, i.e.
5a. Latest Nvidia driver for GeForce 9600M GT => 186.81notebook_win7_winvista_64bit_internationalwhql.exe
5b. Latest WLAN chip driver => Broadcom (4322AG chipset) Wireless LAN Driver for Microsoft Windows Vista 5.10.91.8 (14 May 2009) = sp43743.exe
5c. Lateset Realtek High Definition Audio Codec => VistaWin7R231.zip
6. Although I still have bad DPC latency, I haven't yet noticed any audio/video lag/drop-outs/screeches etc.
Best of luck to you all and I hope this helps someone, Dingle7
Message was edited by: Dingle7
Message was edited by: Dingle7

Hi all,
Here are the links for the latest 'important' drivers:
5a. Latest Nvidia driver for GeForce 9600M GT => 186.81notebook_win7_winvista_64bit_internationalwhql.exe
http://www.nvidia.com/Download/index.aspx?lang=en-us
5b. Latest WLAN chip driver => Broadcom (4322AG chipset) Wireless LAN Driver for Microsoft Windows Vista 5.10.91.8 (14 May 2009) = sp43743.exe
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=321957&prodSeriesId=3872994&swItem=ob-71357-1&mode=5
NOTE: You will need to manually update the drivers in the windows device manager (select 4322AG chipset) because the installer doesn't overwrite the old drivers from Boot Camp
5c. Lateset Realtek High Definition Audio Codec => VistaWin7R231.zip
http://www.realtek.com.tw/DOWNLOADS/
Message was edited by: Dingle7

Why Does Live View In DW Not Work With BC Template?

The live view using a BC template in DW CS6 shows "PAGE NOT FOUND" in the body section but the header and footer look fine. I should also point out that the index.htm page works fine, it's just the other pages that have this problem. What makes it weirder is that the site works fine in all other modes including when viewing in a normal browser, it's ONLY when in live view! I also noticed that if I delete the .htm extension in the url in the DW browser when in Live View it fixes the problem, but this requires me to do this everytime I want to switch to live view and surely is either a problem with how the BC template files are named or DW CS6 is buggy? Hopefully this is an easy one to answer??

Hi Alex,
Thanks for your reply, I have done a video demo at http://screencast.com/t/RsutrvoFn0xZ
Date: Thu, 14 Feb 2013 05:49:55 -0800
From: [email protected]
To: [email protected]
Subject: Why Does Live View In DW Not Work With BC Template?
    Re: Why Does Live View In DW Not Work With BC Template?
    created by Alex Pavelescu in Dreamweaver & Business Catalyst - View the full discussion
Hi, Please provide the site url, and if you can, a video demo of the issue you're facing, using http://www.techsmith.com/jing.html, where you could also display the way you have your side setup ( Dreamweaver menu > Site > Site manager > http://screencast.com/t/GqqBk9MY4ck ) Kind Regards,Alex
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5072585#5072585
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5072585#5072585
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5072585#5072585. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver & Business Catalyst by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Cannot update graphics card BIOS, MSI Live upate 6 will not work.

Live update 6 does not support "MSI Radeon R9 280x Gaming 6G" graphics card.
Live update 6 does not run.
Even tried mass loading Live update 6 to the point it had 800+ "Live Update.exe 32*" processors running in task manager and they soon disappeared 20 seconds later.
No UI.
No Error message.
If the program is not running it is clear it does not support any of the hardware in my system including "MSI Radeon R9 280x Gaming 6G".
As a result I cannot update to latest BIOS for my graphics card.
Operating system: Windows 7 64bit (last update 05/09/2014 6 days ago)
CPU: AMD A8-6600k APU @ 4.60GHz
RAM: 8GB Dual channel Crucial Ballistix Tactical Tracer DDR3 1866MHz CL9
Motherboard: Asrock FM2A88M Extreme4+
GPU: MSI Radeon R9 280x Gaming 6G
GPU details:
Am I required to have an MSI motherboard to be eligible for a graphics card BIOS update?
The reason why I seek this is because the entire line of R9 200 series graphics cards are plagued with screen flickering due to ULPS. BIOS updates for other vendors of the card; "Gigabyte", "Asus" etc have been reported to fix the monitor flicking ULPS causes however since I have an MSI GFX card I cannot use Gigabyte and Asus BIOS updates.
I no longer have the flickering issue due disabling ULPS and overclocking the graphics card however it's causing the card to operate at a constant 48 degrees and chew power.
With the overclock values and stress testing it with Unigine Heaven Benchmark 4.0 (extreme preset) the card reaches a max of 74 degrees over the course of stress testing for 4 hours.
But I would like to be able to have my card at factory clock settings with ULPS without the flickering and I'm wanting to see if the staff at MSI are fully aware of the bug in their product line and if the latest BIOS version for the graphics card would fix the issue.

No but live update is flakey at best and i wouldn't trust it.... (seen far to many problems with it)
if you want a Updated VBIOS if one is available please supply these 2 things and then one of the other mods will be able to get you what is needed!
1: Serial number of your card (leave off the last 3 digits and then there is no unique information about your card as the rest is all just manufacture data to all the cards from that batch)
2: click the little icon to the side of your BIOS version number and save a copy of the VBIOS to a file and uplaod it to somewhere and give us a link to the file... (use somewhere like Dropbox)
once we have those 2 pieces of information someone here will be able to get one if Available for your card

ITunes for Windows 7 64 bit, Windows Live Mail Contacts not (all?) syncing

I have researched this as much as I can but cannot find a solution.
I had my iPhone 4 synced to my Window Vista Home Premium PC using iTunes just fine until January when the PC motherboard crashed. No data was lost and all contacts have been restored to my new PC with is Windows 7 Home Premium (64 bit). My contacts are in Windows Live Mail (Windows Contacts) and I'm syncing via iTunes with "Sync Contacts with: Windows Contacts" selected.
However, not all contacts are syncing with my iPhone. In fact, I'm not sure they are syncing at all, although the sync function goes through. It may be that the only ones that sync are those that existed before the new PC (i.e., the Windows Vista contacts which were in Windows Mail). I have created new contacts on both the PC using the new version Windows Live Mail and on the iPhone since the crash, and would like to get them synced up.
Symptoms:
1) Some specific contacts on PC are not on the iPhone after multiple sync attempts.
I have so far positively identified one contact that did not sync. It shows in Windows Live Mail under Contacts, however it does NOT show up in my Windows username/Contacts folder!
2) One Contacts group on PC is not on the iPhone, although two others are (they probably were from before the crash).
I have so far positively identified one group that did not sync. It shows in Windows Live Mail under Contacts groups, however it does NOT show up in my Contacts folder as a .group file!
3) The same group as #2 also does NOT show up in the iTunes group list under "Selected Groups" on iTunes, but the other two groups do. (I do not use "selected groups" because that disables "all contacts" syncing, but the groups are visible grayed out on the list.)
4) As a test, I created a new contact on my iPhone, synced, and it shows up now in Windows Live Mail Contacts; it also shows up in my Windows username/Contacts folder.
5) As a test, I created a new contact in Windows Live Mail and it does NOT show up in my username/Contacts folder. I synced the iPhone again and it does NOT show up on my iPhone contacts.
OK folks, where are these missing contacts going and how can I get them synced?? Thanks!
PS: I have the latest iTunes 10.5.3.3, no updates are available. However, Apple Support/iTunes seems to suggest Windows 7 64 bit either "does not use Windows Contacts" (which seemed quite wrong until I ran the tests above), and also that Windows 7 64 requires iTunes 10.4.1, which I cannot install because I have a later version installed. I would have assumed the correct version installed for my OS when I installed iTunes on the new PC. iTunes runs fine by itself and in coordination with my iPhone other than the above issue.
PPS: This site seems potentially relevant, however is highly technical: http://liveunplugged.wordpress.com/2011/02/04/windows-live-mail-contacts-databas e/
but doesn't help with this problem.

I didn't get any help on this from the forum, but from studying around and experimenting with different approaches, I have come up with the following conclusions:
Under Windows Vista, Windows Mail synced its contacts with Windows Contacts [which are in c:\users\username\contacts]. iPhone via iTunes synced with Windows Contacts. Changes to either Windows Mail Contacts or iPhone contacts would always update each other. Life was good.
Under Windows 7, Windows LIVE Mail (WLM) does NOT sync its contacts with Windows Contacts. It puts them into a hidden database. If you have prior Windows Contacts and brought them along for the ride, they are still there in the folder but they are not connected to the WLM contacts database
When you first set up Windows Live Mail, you can import your Windows Contacts and they appear to be synced. (In fact, they are, but only at that single point in time.)
If you change any Windows Live Mail contact or add a new one, it does NOT change in Windows Contacts. It only changes in the WLM contacts database. It therefore does NOT sync to your iPhone.
Similarly, if you change a contact on iPhone or add a new one, it will sync with Windows Contacts. However, this does NOT update your Windows Live Contacts.
So, from what I can tell, here is what this means: to maintain a steady state, you have two choices:
Whenever you update or add a contact, add it in either iPhone or Windows Contacts [the Windows Contacts folder has a "New Contact" button], and they will stay in sync with each other. Then manually update or add it in Windows Live Contacts to keep those up to date so you can use them for e-mail. OR
Whenever you update or add a contact, add it in either iPhone or Windows Contacts, and they will stay in sync with each other. DO NOT manually update Windows Live Contacts, but realize they are not always up to date. If an address needed for an e-mail is not in there, manually retrieve it from your Windows Contacts or your iPhone and insert it into the e-mail. [Having done that, you can right click on the address in the e-mail and add it to your WLM contacts if you want.] Periodically, manually delete all of your Windows Live Mail Contacts and then re-import your Windows Contacts into Windows Live Mail and, voila, your contacts are in sync again! (Isn't that great, I mean really awful??)
NOTE: If you follow course #2, DO NOT import your Windows Contacts into Windows Live Mail contacts without deleting your existing Windows Live Mail contacts, or you will end up with a double set plus the new ones.
FURTHER NOTE: I obviously can't make any guarantee you won't lose data if you follow course #2. Be sure you have a complete backup before deleting your WLM contacts. However, I will say that after experiencing a double set of WLM contacts (by failing to understand the first NOTE above), it was impossible to pick out the new items [WLM will now show you the date of entry or modification of the contact, so you can't sort by date], so I deleted all of them and re-imported my Windows Contacts and had a complete set again.
AND ONE FINAL NOTE: I have not tested how any of this affects Windows Live Contacts used online outside of Windows Live Mail, because I do not use Windows Live online.
Please post further comments if you have any more information on this topic.

My N97 experience... not all bad

When I first received my N97 at the end of June with its v10 firmware it was truly awful!
I actually went through 3 handsets in 10 days.
I experienced freezing, crashing, incorrect ringtones, slow GPS and "Out of Memory" issues constantly. I was forced, because of the low C: drive, to install widgets, themes and as many app's as possible to Mass Memory, which in turn led to problems of their own when connecting to PC Suite in anything other than PC Suite mode. I could not even install some of Nokia's own app's as they would take up the precious C: drive.
It took me quite awhile to adjust the Destinations settings, using trial and error, so that I used my home wifi and 3G whilst out.
Then, about two or three weeks later, v11 was released on Vodafone and I upgraded the firmware, using PC Suite, with no problem and was quite pleased that I did not have to reinstall everything from scratch. The only change that I noticed with v11 was that my widgets worked a little better and that my thumbnails loaded quicker. However, the phone still gave me "Out of Memory" errors, crashed and was sluggish and unresponsive to touch, sometimes requiring 3/4 taps to get it working.
Like the majority of N97 owners, I was not a happy bunny and felt ripped off when I compared the N97 to my N95 and N95 8GB. I was thoroughly cheesed off with having to go through manually clearing the browser cache every day, not being able to have theme effects on or use anything except the built in themes for fear of crashing. Also the GPS was still taking far too long to get a mediocre lock.
Then around the end of August it was announced that v12 would be launched to address some of these problems and I eagerly awaited its coming. As with all the N97 firmware releases, the Continent version was released first, this was then to be followed by the UK CV (Country Variant) at some time in the future and finally the operator branded version even later still.
It was at this point that my frustration with the N97 got the better of me and I took the decision to change the product code to the Euro one and risk voiding my warranty to get v12 that much quicker,all went surprisingly smoothly and I was able to obtain the v12 firmware weeks ahead of Vodafone's release.
The v12 firmware did bring about some minor changes but not enough to stop my handset from crashing, freezing, every now and then. I still found the phone to be sluggish and unresponsive. I was still having to spend a lot of time "nursing" it by Clearing C: drive, which was hovering around 15MB and watch my RAM usage at around 10Mb. I still could not use anything other than the built-in theme with no effects for fear of overloading the pitiful RAM.
I was also using the beta Nokia Photo Browser as this seemed to display quicker and better than the Gallery. Also, album art was a bit hit and miss although my crashes and freezes were less. To say that I was disappointed at this stage would be an understatement. I felt thoroughly cheated by Nokia who, it seemed to me, had rushed out the N97 with immature firmware just to compete with the iPhone 3GS.
I had experienced poor RAM before, with the N95, but this had been rectified to a large extent, by a firmware update. I thought about the millions of people worldwide who had purchased the N97 and had not, or could not, update the firmware and were cursing Nokia and the N97.
It would seem that Nokia had not learnt from Apple iPhone's original launch when they promised the earth and ended up refunding early adopters after pressure was brought to bear. I also despised Nokia's head in the sand approach to the lens scratching fiasco that, luckily, I have not suffered from.
By this time I was seriously considering getting rid of my N97 and moving on. It was becoming a full time job to ensure that there was enough RAM and C: drive. I was constantly having to make tradeoffs about installing certain app's and although my GPS had improved it wasn't great. I was also cheesed off using the scroll bar to go through lists and got frustrated with it on Contacts and Music, usually ending up using the Nav pad. The touch screen was still a joke with me having to constantly tap to try and get it to work.
Enough was enough!
I'd spent over a quarter of a year trying to come to terms with what was supposed to be a Nokia flagship phone costing £500 that just did not deliver.
And then I saw a preview of v20 with its kinetic scrolling and RAM and C: usage enhancements and thought I'd give the N97 one last chance.
After all, I stood to lose about half the phones cost if I tried to sell it on.
Like most of you, I waited with baited breath for the will they, won't they, release of v20.
Then, finally, it became available for my, now, unbranded Euro firmware and I jumped on it immediately.
That's where I made my first mistake, as I downloaded v20 straight away using NSU and immediately started to get freezes, crashes and rebooting. Photo's were slow and the Music library was a nightmare.
The penny then dropped, as they say, and I realised from my experiences with the N95 and N95 8GB, that with a firmware upgrade of this magnitude it was bound to cause problems if I either just upgraded or reinstalled from PC Suite backup.
I then proceeded to format both the phone and Mass Memory and reinstall everthing from scratch. Not an easy or short task I might add.
It was worth it though!
I had nearly 60MB free on C: drive, before installing themes, app's and widgets. My RAM was now 40+MB after boot up and rarely goes below 20MB.
Kinetic scrolling is a joy to use. The phone is no longer sluggish. The touch screen is very responsive. I ditched Nokia Photo Browser beta as the in-built photo's prog offered so much more. The music library is a lot better. Particularly with album art. Boot up time is quicker. Widgets are more stable, although Accuweather seem to have dropped "Current Location". My GPS achieves a more accurate, and quicker, lock than before. I experience a lot less lags. The built-in browser is a lot quicker, I can hold down a key in QWERTY to get a symbol. The speakers even sound better!
Also there was a lot of tinkering and tweaking of settings as this can make a big difference to the way the phone funtions, as we can see by the forum postings.
IMHO this was the N97 I thought I was getting in June. This is the N97 that Nokia should, and could, have released and I cannot excuse them for palming off inferior firmware.
OK, it's not perfect, but as Julia Roberts says in Pretty Woman... "it has potential".
Am I going to ditch it? The answer is no!
Because I think that v20 has gone a long way to solving a lot of the things that bugged me. It shows me what this phone is capable of. It can multi task. It can run prog's without crashing.
Some of us wax lyrical about the N95 but I remember all the complaints about the lack of RAM and it's slowness, poor camera and video. until it received it's v20 upgrade which changed the phone completely and actually put it ahead of the N95 8GB with its restricted Mass Memory.
Perhaps smart phones are becoming too smart.
We get them and fire them up, sometimes ignoring the manuals, and then shove loads of third party software on them without a thought or adjustment to settings and expect them to work perfectly. I know from my own experience that I've had to uninstall software from a handset because of conflicts or poor programming.
I know that there are delays with the release of firmware updates between the Continent, CV and operator branded handsets but this is not all down to Nokia but rather to getting country approvals and operator "adjustments".
I must stress that these are my opinions based on my usage, app's and phone model.
I understand I may come in for a lot of flak for this and I am certainly no technical genius. I'm just trying to relate my everyday experience and frustration with the N97.
As my dear old mum used to say... "Speak as you find" and I'm finding this phone a lot better than it was.
Message Edited by wildreamer on 15-Nov-2009 09:01 PM

I have had a very similar experience with the N97 and agree that now with firmware v20 the phone is just usable. It's ridiculous that to get to this point we've had to put so much work into researching solutions, resetting the phone multiple times, formatting the mass memory, reloading media and maps (also multiple times), uninstalling and reinstalling apps, and installing and reinstalling firmware updates. My wife jokingly said to me that I'd spent more time trying to get the phone running than actually using it. The sad thing is that this is pretty much true and no matter how well the phone works I will always remember the first four months of very sub par performance.
IMHO if Nokia hadn't skimped on the memory for the RAM and c drive the N97 would have suffered from a lot less problems. Also instead of spending four months trying to resolve these memory issues in the development for the v20 firmware release, they could have focussed on the multitude of other bugs. And how much do you think Nokia saved by skimping, maybe a few dollars per handset. Contrast this with how much bad publicity they have received over the N97 as well as the bad experience for people who spent US $700 for a flagship device.
Added to all these faults is the poor way that Nokia have handled this. From the head in the sand approach to the camera lens scratches and poor GPS, to the lack of Mac support, and to the complete denial that there is even a problem.
Nokia's official support is also problematic, the user to user forum is good but it should not be a replacement for official support pages (the device support pages only provide the product guide and link to the discussions forum) and getting anything other than form responses and incorrect information from the Nokia Customer Care makes this service a complete waste of time.
Will I sell my N97? No, not for the moment.
Can I recommend the N97? No!
Can I recommend any Nokia product? No!
Nokia N97 (RM-507) v 22
iPhone 4 (Coming Soon) - Lemon N97 - SE - Nokia 8210 - Nokia 7710 - Nokia 5100

How do I find and manage my iPad on the new iTunes? It's not there.

How do I find and manage my iPad on the new iTunes? It's not there.

You can have the 'classic' view by clicking on View - Show sidebar. In the new view, your iPad will have a link on the upper right.

Error occurred in deployment step 'Add Solution': Operation is not valid due to the current state of the object

hi,
when i was trying to deploy a SP solution from my vs 2012 solution. this error is displayed.
i tried many things like
1) get the wsp and apply power shell cmds to add and deploy, here also it failed:
Add-SPSolution -LiteralPath d:\mywsp.wsp
Install-SPSolution mywsp.wsp -GacDeployment -AllWebApplications -Local
2) restart the timer services and do iisreset and reboot the server. etc .as mentioned in one of the the below blogs:
http://sharepoint1on1.blogspot.in/2014/04/sharepoint-error-occurred-in-deployment.html
http://suehernandez.wordpress.com/2011/03/31/error-occurred-in-deployment-step-activate-features-operation-is-not-valid-due-to-the-current-state-of-the-object/
http://www.dotnetsharepoint.com/2014/04/error-occurred-in-deployment-step-add.html
http://social.msdn.microsoft.com/Forums/en-US/63adde23-03cf-4b65-923e-1219da94a780/error-occurred-in-deployment-step-add-solution-operation-is-not-valid-due-to-the-current-state-of?forum=sharepointdevelopmentprevious
http://www.shakirmajeed.com/error-occurred-in-deployment-step-activate-features-operation-is-not-valid-due-to-the-current-state-of-the-object/
but even after doing all these steps, the error still persists!. and am not deploying into a remote server, the dev env is in a VM, where sp 2013, vs 2012, sql 2012 are installed.
just wanna share one note: there is a isue in my search admin component. index was reset due to some reason. and from that time onwards my search full/incremental crawls were not working!
will this cause an issue in my wsp deployment ? i hope it wont, still asking...
can anyone help me how to resolve this error.because this is a show stopper for me for the last few days!
help is highly appreciated!

This issue cause because of feature activation failure while WSP deployment.
when you create a WSP using visual studio, it creates WSP package with default deployment configuration settings.
Please restrict feature activation configuration, this will help you to troubleshoot this issue.
- Click on Project in WSP and press F4, it will open "Project Properties"
- set "Active deployment Configuration" - as "No Activation"
- you can activate this features in required sequence after deployment using Activate-SPFeature
If my contribution helps you, please click Mark As Answer on that post and Vote as Helpful
Thanks, ShankarSingh(MCP)

Error_27_Error occurred in deployment step 'Activate Features': Operation is not valid due to the current state of the object.

I created a SharePoint 2013 farm solution project in Visual Studio 2013 (running on the same machine where SharePoint 2013 server is running) with
event receiver. I added web.config at project root level to store connection string (I'm working off external SQL DB) and got the following error during deployement:
Error 27
Error occurred in deployment step 'Activate Features': Operation is not valid due to the current state of the object.
When I commented out the ConfigurationManager.ConnectionStrings["MyConnectionString"].ConnectionString; the error went away. Am I missing something or not supposed to add my own App.config to SharePoint project solution?

Hi,
From your description, you might want to store your connection string in web.config and there is an error during deployment.
It is recommended to store the configuration data of SharePoint solution in either property bags or hierarchical object store.
The links below will provide more information about this:
http://blogs.msdn.com/b/zwsong/archive/2012/03/27/where-should-you-store-your-sharepoint-solution-s-configuration-data.aspx
http://msdn.microsoft.com/en-us/library/ff647766.aspx
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they
help and unmark them if they provide no help. If you have feedback for TechNet
Subscriber Support, contact [email protected]
Patrick Liang
TechNet Community Support

Error occurred in deployment step 'Activate Features': Object reference not set to an instance of an object: feature receiver error

I cretaed a Visual web part in SP 2013. It needs a SharePoint list. So wrote below code in web part feature receiver. When I deploy the solution I get error says Error occurred in deployment step 'Activate Features': Object reference not set to an instance
of an object. I set ActivateOnDefault="FALSE" and AlwaysForceInstall="TRUE" . Take a look on my feature manifest file.
I cretaed a Visual web part in SP 2013. It needs a SharePoint list. So wrote below code in web part feature receiver. When I deploy the solution I get error says Error occurred in deployment step 'Activate Features': Object reference not set to an instance
of an object. I set ActivateOnDefault="FALSE" and AlwaysForceInstall="TRUE" . Take a look on my feature manifest file.
<Feature xmlns="http://schemas.microsoft.com/sharepoint/" Title="SharePointProject1 Feature1" ActivateOnDefault="FALSE" AlwaysForceInstall="TRUE" Id="8f7163d5-6c65-40d8-9045-8f74192f07d7" ReceiverAssembly="SharePointProject1, Version=1.0.0.0, Culture=neutral, PublicKeyToken=9c2f0c3a8e22f6a0" ReceiverClass="SharePointProject1.Features.Feature1.Feature1EventReceiver" Scope="Site">
<ElementManifests>
<ElementManifest Location="VisualWebPart1\Elements.xml" />
<ElementFile Location="VisualWebPart1\VisualWebPart1.webpart" />
</ElementManifests>
</Feature>
This is my Feature1EventReceiver code.
SPWeb spWeb = properties.Feature.Parent as SPWeb;
SPList laptopList = spWeb.Lists["Laptops"];
if (laptopList != null)
laptopList.Delete();
SPListCollection lists = spWeb.Lists;
lists.Add("Laptops", "The Laptops", SPListTemplateType.GenericList);
laptopList = spWeb.Lists["Laptops"];
laptopList.Fields.Add("Name", SPFieldType.Text, true);
laptopList.Fields.Add("Model", SPFieldType.Text, true);
laptopList.Fields.Add("Image", SPFieldType.URL, false);
I can deploy if I have only below code
SPWeb spWeb = properties.Feature.Parent as SPWeb;

hi
features containing webparts must be site scoped, so you must get spweb as bellow:
SPSite spSite = properties.Feature.Parent as SPSite;
SPWeb spWeb = spSite.RootWeb;
yaşamak bir eylemdir

Error occurred in deployment step 'Activate Features': Object reference not set to an instance of an object.

I am trying to create a custom timer job and while deploying it getting the error as:
Error occurred in deployment step 'Activate Features': Object reference not set to an instance of an object.
where am i going wrong?please suggest...
Thanks
Suu30

I am not able to get the errors.So attaching the error log files here.Please help
08/21/2012 17:35:03 1 INF Entering function PsconfigUserInterfaceMain.Main
08/21/2012 17:35:03 1 INF    Entering function Common.SetCurrentThreadCultureToInstalledCulture
08/21/2012 17:35:03 1 INF      Entering function Common.SetThreadCultureToInstalledCulture
08/21/2012 17:35:03 1 INF        Current thread culture is English (United States), current thread ui culture is English (United States), installed culture is English (United States)
08/21/2012 17:35:03 1 INF      Leaving function Common.SetThreadCultureToInstalledCulture
08/21/2012 17:35:03 1 INF      The current ui culture English (United States) is NOT right to left
08/21/2012 17:35:03 1 INF    Leaving function Common.SetCurrentThreadCultureToInstalledCulture
08/21/2012 17:35:03 1 INF    Creating the psconfig application context
08/21/2012 17:35:03 1 INF    Entering function PsconfigApplicationContext.PsconfigApplicationContext
08/21/2012 17:35:03 1 INF      Entering function UserInterface.UserInterface
08/21/2012 17:35:03 1 INF      Leaving function UserInterface.UserInterface
08/21/2012 17:35:03 1 INF      Entering function TaskDriver.TaskDriver
08/21/2012 17:35:03 1 INF        Entering function TaskDriver.BuildCommandCollection
08/21/2012 17:35:03 1 INF          Entering function CommandCollectionBase.CommandCollectionBase
08/21/2012 17:35:03 1 INF          Leaving function CommandCollectionBase.CommandCollectionBase
08/21/2012 17:35:03 1 INF          Entering function CommandCollection.CommandCollection
08/21/2012 17:35:03 1 INF          Leaving function CommandCollection.CommandCollection
08/21/2012 17:35:03 1 INF          Entering function CommandCollectionBase.CommandCollectionBase
08/21/2012 17:35:03 1 INF          Leaving function CommandCollectionBase.CommandCollectionBase
08/21/2012 17:35:03 1 INF            Creating the APPLICATION bool exposed parameter
08/21/2012 17:35:03 1 INF          Leaving function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF          Entering function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF            Creating the APPLICATION bool internal parameter
08/21/2012 17:35:03 1 INF          Leaving function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF          Entering function Parameter.Parameter
08/21/2012 17:35:03 1 INF            Entering function Parameter.Initialze
08/21/2012 17:35:03 1 INF            Leaving function Parameter.Initialze
08/21/2012 17:35:03 1 INF            Creating the SINGLESERVER bool exposed parameter
08/21/2012 17:35:03 1 INF          Leaving function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF          Entering function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF            Creating the SINGLESERVER bool internal parameter
08/21/2012 17:35:03 1 INF          Leaving function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF          Entering function Parameter.Parameter
08/21/2012 17:35:03 1 INF            Entering function Parameter.Initialze
08/21/2012 17:35:03 1 INF            Leaving function Parameter.Initialze
08/21/2012 17:35:03 1 INF          Leaving function Parameter.Parameter
08/21/2012 17:35:03 1 INF          Entering function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF            Creating the V2V_INPLACE_UPGRADE bool exposed parameter
08/21/2012 17:35:03 1 INF          Leaving function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF          Entering function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF            Creating the V2V_INPLACE_UPGRADE bool internal parameter
08/21/2012 17:35:03 1 INF          Leaving function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF          Entering function Parameter.Parameter
08/21/2012 17:35:03 1 INF            Entering function Parameter.Initialze
08/21/2012 17:35:03 1 INF            Leaving function Parameter.Initialze
08/21/2012 17:35:03 1 INF          Leaving function Parameter.Parameter
08/21/2012 17:35:03 1 INF          Entering function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF            Creating the CLEAN_INSTALL bool exposed parameter
08/21/2012 17:35:03 1 INF          Leaving function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF          Entering function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF            Creating the CLEAN_INSTALL bool internal parameter
08/21/2012 17:35:03 1 INF          Leaving function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF          Entering function Parameter.Parameter
08/21/2012 17:35:03 1 INF            Entering function Parameter.Initialze
08/21/2012 17:35:03 1 INF            Leaving function Parameter.Initialze
08/21/2012 17:35:03 1 INF          Leaving function Parameter.Parameter
08/21/2012 17:35:03 1 INF          Entering function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF            Creating the B2B_UPGRADE bool exposed parameter
08/21/2012 17:35:03 1 INF          Leaving function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF          Entering function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF            Creating the B2B_UPGRADE bool internal parameter
08/21/2012 17:35:03 1 INF          Leaving function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF          Entering function Parameter.Parameter
08/21/2012 17:35:03 1 INF            Entering function Parameter.Initialze
08/21/2012 17:35:03 1 INF            Leaving function Parameter.Initialze
08/21/2012 17:35:03 1 INF          Leaving function Parameter.Parameter
08/21/2012 17:35:03 1 INF          Entering function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF            Creating the SKU2SKU_UPGRADE bool exposed parameter
08/21/2012 17:35:03 1 INF          Leaving function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF          Entering function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF            Creating the SKU2SKU_UPGRADE bool internal parameter
08/21/2012 17:35:03 1 INF          Leaving function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF          Entering function Parameter.Parameter
08/21/2012 17:35:03 1 INF            Entering function Parameter.Initialze
08/21/2012 17:35:03 1 INF            Leaving function Parameter.Initialze
08/21/2012 17:35:03 1 INF          Leaving function Parameter.Parameter
08/21/2012 17:35:03 1 INF          Entering function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF            Creating the runningupgrade bool exposed parameter
08/21/2012 17:35:03 1 INF          Leaving function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF          Entering function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF            Creating the runningupgrade bool internal parameter
08/21/2012 17:35:03 1 INF          Leaving function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF          Entering function Parameter.Parameter
08/21/2012 17:35:03 1 INF            Entering function Parameter.Initialze
08/21/2012 17:35:03 1 INF            Leaving function Parameter.Initialze
08/21/2012 17:35:03 1 INF          Leaving function Parameter.Parameter
08/21/2012 17:35:03 1 INF          Entering function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF            Creating the LanguagePackInstalled bool exposed parameter
08/21/2012 17:35:03 1 INF          Leaving function BoolExposedParameter.BoolExposedParameter
08/21/2012 17:35:03 1 INF          Entering function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF            Creating the LanguagePackInstalled bool internal parameter
08/21/2012 17:35:03 1 INF          Leaving function BoolInternalParameter.BoolInternalParameter
08/21/2012 17:35:03 1 INF          Entering function Parameter.Parameter

Experience Manager 3.1.1 : Deploy to live only an experience (not all)

Similar Messages

Maybe you are looking for