Experience rule question (a possible limitation?)

Hi,
I am using experience rule/subportal to show users customized layout for our communities. I expect the users will see the customized layout right after they log into the portal. I achieved the customized layout/menus using adaptive tags in a custom header portlet.
The problem is many communities in our oganization has custom community header which will overwrite my subportal's header. So in my experience rule, I need to specify my experience definition only applies to certain users when they access certain communities(e.g. communities in this subportal).
However I found out that users will automaticly go to the My Page in the default experience definition and my customized exeperience definition only take effect when I go to my community. If I don't add the community constraints in my experience rule, the user will directly go to the correct definition. However this is not an option since many other communities' headers will overwrite my menu system and make the portal not navigatable.
I wish the community constraint also include "My Page" so my experience definition will always work.
Have you encountered the same problem? Any suggestions?
thanks!
-Jimmy

You can create an experience rule against a particular portal URL by going into the Admin section: Select Utility: Experience Rules Manager.
Name the rule, add an experience definition, and then add your URL.
I haven't tried it but I assume this would solve your issue?
Let us know if it works, thanks!

Similar Messages

Two questions about possible limitations in the Trial version

1) I'm unable to format Date and Time using the Inspector/Table/Format option - is this because I'm using the Trial Version?
The thing I'm trying to do is lose the day of the week in the default, so instead of "Sunday, August 26, 2007" it would read "August 26, 2007".
Can I do this in the full registered version?
2) I'm unable to change the top margin of a document in the trial version. I've gone into File/Page Setup/Paper Size/Manage custom sizes and changed the margins to no avail. It prints out exactly as it did before I made the changes. Is this also a limitation of the trial version that works fine in the full version?

Hi Walt:
Thanks for the quick reply.
Re: the date format, I know I can change it manually by control-click, but I was trying to change the default, so that it always gives me "Month Date, Year", instead of "Day of week, Month Date, Year". My problem with the "Automatically Update on Open" option is that yes, it will give me what I want when I CREATE a new document, but anytime I open an old document to read it, it will change the date from the date it was created to the date it was re-opened.
Is there ANY way I can insert date and get the format I want each time without having to manually change it?
As for the top margin, thanks. I see that the only way to change a document's margins is by going into the Inspector and changing them under "Document Margins". I was changing them under File/Page Setup, and drilling down to Printer Margins. Since that didn't seem to change anything ... what are Printer Margins and what does changing them actually do (since I couldn't tell any difference when I changed them)?
/rb

Question about possible limitation with Outlook 2013 and Acrobat 11 Pro

Is anyone aware of a limit on folders displaying in the "Convert folders to PDF" when selecting folders to print from Outlook 2013?
My coworkers and I have noticed that plus signs are not available for viewing folders when attempting to print a pdf file using the "Convert folders to PDF" option in the Adobe PDF plug-in. However, these plus signs that are used to expand folders when viewing PST files in Outlook are available.
The below is not the exact example of the issue. I included it to show how the plus signs display. Each PST file that is added to Outlook should display in the window including all of it's folders and subfolders.
If anyone can answer whether or not there is a limits or any limitations when working with Outlook in this regard it would be greatly appreciated.
-Jason

Good morning to everybody.
Hi Test Screen Name, thanks to answer to my aplly.
Well after see same computers here, my Acrobat Pro is the 7.0 (CS2), ... and the Reader is 11.0.2 (XI) ...
But after your help here, I think the script - event.target.buttonImportIcon(); doesn't work with higher than CS2
The CS3 and CS5 we have here - Didn't work,
but in the computers where is install the Adobe CS2 ... Almost Perfect-Works
On computers without Adobe - Is better I keep dreaming - "No way josé - don´t work" || Reader 10 (X)
It's a shame, a simple action and quite useful for interactive forms. And I ran out solutions ...
I going to pray for them have a lower Reader version
Anyway Thanks to _ Try67 _ and _ Teste Screen Name

I just accidentally deleted my Adblock Plus, (which had my own customize blocking rules) is it possible to restore this ???

Hi, Arrgh.. help!!
So I just accidentally deleted my Adblock Plus, (which had my own customize blocking rules) is it possible to restore this ??? (i'm blaming it on my strawberry yogurt.. for distracting me cause it was so good.....*note to self.....do not eat strawberry yogurt while on computer.) ..sigh!
It does seem that i still have a "adblockplus" file that is in my firefox profile files (though i guess that could be the file for the "Element Hiding Helper extension for Adblock Plus" which wasn't deleted.)
. . .i would very much like to restore it, as i mentioned above i had many of my own customized blocking rules, along with rogue antivirus/security/software, phishing, malvertising, malware blocklist, etc..
In the mean time i'm going to copy those "adblockplus" files that are in my firefox profile files (that i mentioned above) ..in a zip file on my desktop in case it goes missing, and go to "Adblock Plus" and add it along with a few of it's blocking rules for now.

Hi Teagan, were you able to recover your rules?
Many times, when you remove an extension, its preferences are left behind, so there's a good chance that reinstalling the extension will enable you to recover them. OR, it may reset them, which would be the opposite of what you want.
Could you provide any advice for future users who have this question?

Getting an Experience Rule to work

I am building a demo site and have set up an new experience def - it has a custom header, footer, css.
This is on my development box and of course there is a default exp. def that is different.
The regular URL would be disco-dev.ads.net
and the demo site (same ip addresss) would be
disco-demo.ads.net
I then set up a custom experience rule in the experience manager that has only the URL rule set up it is
http://disco-demo.ads.net/portal/server.pt?
I am logging in as the admin (who is in the default exp def folder) and I do not get taken to the Demo experience.
When I look at the debug messages I have this:
Display Page Phase Begin
Evaluating expressions for action type: Experience Definition
Evaluating simple expression: Tango Demo -
Condition on Base URL returning false because the URL Domain: disco-demo.ads.net/portal/server.pt? does not match the one found in the user's environment: disco-demo.ads.net/portal/server.pt
Expression: Tango Demo returning false
Finished evaluating expressions for action type: Experience Definition. Resulting action value: No Action Value Found
Display Page Phase Ends
What does this mean???
Edited by laurie.kern at 03/04/2008 12:17 PM

When you create a new rule, the portal URL section states: 'between the 'http(s)://' and '?' in 'server.pt?'. So don't include /portal/server.pt on the end or http(s):// at the beginning.<br>
Change your portal url to this: disco-demo.ads.net
<br>
We use wildcards a lot in our rules and they work just fine.
Many of ours also use this: mydomainname.com/

URL Customization Using Experience Rules

We've got a bit of a sticky problem and am wondering if anyone can point me in the right direction.
We've used experience rules to point custom URLs to communities. However, when another user types in a URL to access a community on the portal, the previous URL appears as a link in every navigation link and login on the portal. In other words, the minute the user chooses a link from the dropdown menu or logs in, they are taken to the previous community. Thereafter, the header, footer and colors from the rules of the previous community show up in every community the user goes to.
This is extremely frustrating and confusing to our users. It appears that URLs are being cached in the navigation and/or experience rules configuration is overriding.
Has anyone else had this experience? Is there a way around this problem? Any ideas would be greatly appreciated.
Jo
PS - Please forgive if you see this twice - I think I posted to the wrong forum earlier
Edited by: user10368007 on Sep 26, 2008 9:19 AM

Can you give us a little bit of context on which product you've been working with?
Thanks in advance

Request does not contain any saved update rules; rollback not possible

Hi,
In BW on hana, there's a 3.x flow DSO where it loaded a request from PSA.
It failed due to activation error SID Generation. But unfortunately, due to PSA Deletion process chain, it's PSA Request got deleted.
Now, we couldn't delete the red request(failed request) from the 3.x flow DSO.
If we try to delete, it shows job has been completed successfully with the following message:
Job started
Step 001 started (program RSDELPART1, variant &0000000004233, user ID )
Delete running: DataStore object ZREBATE, from 630,138 to 630,138
Delete is scheduled; Selection conditions were substituted
Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
Job finished
I went to the table RSICCONT and checked the mentioned request. But I couldn't find delete option enabled. Even our basis team doesn't have authorization to delete the mentioned request from the standard table RSICCONT.
Request you to please help me how to handle this.
Regards,
Antony Jerald.

Hi Antony,
Once you have deleted the data in PSA there is no way to reconstruct the request hence you can do below things to correct it
1) Identify the No of Records which having error , because if you have more records it will take more time as in debug mode we have option to edit only one record at one.
2) Display only one record in Active table and change it using the Debug option ( not recommended ), but as you are in corner we need to use this
3) change the records with respective values and active the request again
Regards
Jagan

Design Rules question

Hello,
It'd be possible to access the sources of Design Rules to be possible we customize them ?
It will become faster our undestanding about the scripts and leverage our customize needs.
Regards
Nelson Rosa

Hi Nelson,
Seems that there is some misunderstanding.
Support for scripting languages use is part of Java and since DM is created in Java it's just there.
There is lot of info here http://java.sun.com/developer/technicalArticles/J2SE/Desktop/scripting/ and here http://download.oracle.com/javase/6/docs/technotes/guides/scripting/programmer_guide/index.html
Only scripting engine included in Java is Mozilla Rhino and it provides support for JavaScript. Other ones are from third party vendors and if you want to use one, you have to download appropriate *.jar libs and put it in Java_install_path/jre/lib/ext directory.
I couldn't find the right link, bit these are most of the engines http://www.squidoo.com/scripting-java.
Actually a person can create own scripting engine.
So to answer you - from DM perspective there is one relatively simple Java class and that's it. Rest of it is scripting engine responsibility.
Hope this is helpful.
Regards

Photoshop CS4 Experience, Problems & Questions

Hi all,
i just installed my Production Suite Premium on the following System (fresh install, clean System, no other versions of Photoshop):
Intel E8500 Dualcore
Nvidia Geforce 9800 GX2 (Driver Version 178.24)
3 GB RAM
Windows XP Professionel SP3
Photoshop has its own Scratchdisk assigned with at least 50 GB free Space.
I know that the 9800 GX2 is considered to be a "Gaming-Card" but as a freelance artist i work for the game-industry on many occasions and I need a decent gaming hardware to test what I am working on. As far as I know, the card meets all requirements for CS4 and Nvidia tells me, that their GPU's are perfect for CS4. (wasn't a problem with any version before, I use Photoshop AND Nvidia-Cards since Photoshop 4)
Here are the things that bug me:
- Photoshop disables the OpenGL Features on random occasions, stating, that it has encountered a problem. This happens either in Two GPU-Mode or One-GPU-Mode.
There's no obvious reason for any errormessage, because IF Open GL is activated it seems to work pretty good, zooming and rotating works quite well and fast. I noticed, that the problem happens either after saving my file or when i open photoshop.
- Photoshop crashed on several occasions mostly concerning heavy transforming of multiple layers. It simply didn't respond anymore in the midst of the transormation-process.
My guess is, that this is also linked to the GPU/Driver. System-Memory is checked, GPU works like a charm in all other applications. CS3 has not once crashed in one year, so i guess it has to do with the changes made in CS4.
Strange thing is, that even with open GL deactivated, the above written problems occur. I would have thought, that with OpenGL dectivated, Photoshop would somehow become kind of CS3 again, but it seems, there had been to much changes to simply disconnect photoshop from it's new OpenGL interface.
Apart from these two Problems, Photoshop CS4 is doing ok. It feels kind of sluggish compared to older versions, but that might also change with some new drivers.
Sad thing is, that the rotate canvas feature and the extended moverange for images, the main reasons why i upgraded to CS4, are only working with
OpenGL activated. I really hope there will be a fix in the near future.
There are other questions concerning PS CS4's usability:
- The Scale-Brush Feature uses alt + right mouse buttons, what seems kind of strange when using a stylus (Even more when using a stylus without buttons like the wacom layout-marker).
I would prefer another combination of keyboard shortcuts plus stylus movement ctrl + alt for example. so far i have not found a way to remap the keys. Am i missing something? Or is this impossible?
- Is there a way to get window behavior back the way it was in CS3? The new way of handling windows is ok, but i liked the old one better. If i disable "floating windows docking" there's no way to maximize a window INSIDE the photoshop workspace. The maximize button on top of every window is right now completely useless because it maximizes the window AND gets rid of all the menus and palettes. I don't see why i want to do that.
That's it. I hope this is useful either for the guys at adobe or for other users. Every new Photoshop-Version has had its problems, i hope that these will just be dealt with like the ones before.
All the best,
Pickman

Photoshop CS4 does cause crashes. I can vouch for that too. When it happens, the first instinct is almost always to assume that something is wrong with the computer and start from there. Comments to this effect are prominent in many threads. It is also Adobe's prevalent approach. So people experiencing these problems will tend not to post on these forums. Statements like 'because there are only a few posts, a significant number of people are not experiencing [these] problems' are therefore unfounded. There simply has not been time yet for people to resolve potential hardware/system problems.
In my case, I started experiencing unexplained crashed with CS3 in July (see below) but it was only when Adobe admitted that they could be partly to blame that I posted my experiences (elsewhere) on this forum.
Anyway, to cut a long story short, I have installed Photoshop CS4 on a newly reformatted HDD containing a fresh clean installation of Windows XP/SP3, fully patched, with everything working hunky dory, and no legacy installations of Photoshop or other CS software to worry about. All the same PS CS4 keeps crashing. The symptoms are unexplained total freeze ups occurring at random. I may get several hours use, sometimes a lot less, before I am forced to reboot and start all over again. Certainly the ability to do any useful work is severely compromised, and yes, the first inclination is to blame the hardware or system installation.
The thing is I had been chasing a similar, probably related, problem with CS3 (possibly caused by cloning my system drive, see http://www.adobeforums.com/webx/.59b6bd8d/ ) while Photoshop was still activated, so I have had several months head start over anyone who may now be experiencing similar problems with CS4. As a result, Dell, whose support has been great throughout, have replaced just about every component under the hood of my PC, certainly everything that could be causing a problem. (GPU, CPU, memory, MB, PSU, disk controller, disk cables...). As a result, I am running a virtually brand new computer. Hardware and system problems have been all but eliminated. I have all the latest drivers for everything. It is virtually a brand new computer!
Yet PS/CS4 keeps crashing for no reason that can be established. Adobe have given me lots of homework to do to try to find out what affects it or remedies there are. It is all very tedious, but so far, nothing...
I am coming to the conclusion that there must be something intrinsically wrong with PS/CS4 that makes it incompatible with some systems and software installations, but not necessarily because of any fault with the latter. I have to say that, after initially trying to push me away, Adobe are being very helpful and clearly want (need?) to get to the bottom of this. The trouble is that when the system locks up, it is completely and utterly paralysed, so any diagnostic and error reporting systems are inoperative. This suggests something beneath or beyond Windows, and, if it is not hardware, this points the finger of blame squarely at the activation software, which uses rootkit technology. (Would this be the same on a Mac, I wonder?)
For the record, my system is a Dell Precision 370 desktop with Dell/Phoenix BIOS A08, 3.2GHz Pentium 4 CPU, Intel 925X chipset, 2MB ECC SDRAM, Nvidia Quadro FX3450 graphics, 2x Seagate 146MB Cheetah 5.5k disks (SCSI) in non-RAID configuration. From the limited experience I have had, it seems perfectly capable of running the software (apart from when it crashes, of course.)

Mail Rules Question

I have a lot of email on my Gmail account. A semi significant portion of them are status updates, such as Facebook, Pownce, Netflix, and other site updates. In the past when I used POP, it wasn't such a big deal to keep these emails because Gmail offers something like 4GB of space. However, now that I am switching to IMAP, it's taken me forever sync with all 14,000 emails on the Gmail server.
I don't want to have to do that again, especially not on my iPhone.
My question is this: Is it theoretically possible to setup a mail rule to have a specific folder delete all its contents after a specified amount of time? Looking in the default mail rule options, there is the ability to delete email as it comes in, but not necessarily after, say, 30 days. I'm looking for something along the lines of, "every 30 days, delete everything in this mail folder."
Any ideas?

David Gimeno Gost wrote:
Mail doesn’t provide that functionality, but you may set up a smart mailbox that displays the messages to be deleted, then manually delete whatever shows up there every once in a while.
Yeah, that's what I figured.
Another option is writing an AppleScript and selecting the "Run AppleScript" rule option, but I'm a) not 100% it's even possible, and b) rusty on AppleScript.

Licensing rules question...

Especifically on Named User - Multi Server
In my company we have (by expample, not actual number ) 200 NUMS Licenses
How do i Check if we havent reached more Named Users than the Licensed ones...
Reading the Definitions and General Licensing Rules, i have my dubts interpreting
"Individual authorized by Custumer to use the programs which are instaled on multiple servers."
So far i have this options on my mind...
1. I wonder if that means Any single "user" created within the database (DBA_USERS)
2. or the MAx number of active connections to the database at any given time
Can someone explain it to me... (with a sample if possible) :(

Hi,
>>I wonder if that means Any single "user" created within the database (DBA_USERS)
There are no relation with license nominated users and active sessions / number of schemas (DBA_USERS) on the database.
eg:
If you have 200 licenses nominated users, then you can even have 200 users (employees)
using Oracle Database. Then, you can have 200 employees open 1000 sessions on your database connected in 1000 different schemas without problems.
Otherwise, If you have a license by CPU, then there are no limits...
If I will wrong, please someone correct me...
Cheers

A question regarding the limitations of using MS Access.

Hello everyone,
my question is not one of a direct comparison between Access, SQL Server and mySQL, but is concerned with how much of JDBC 2.0's functionality I can implement using an Access 2000 database and a type 1 driver.
Are there area's of JDBC 2.0 that do not work with an Access database. I ask this as I seem to recall from reading Gregory D. Speegle's book - "JDBC: Practical Guide for Java Programmers" that some resultset methods [I think] do not work with Access. Is this correct, and if so which methods are they?
Thank you for your help.

access does many things in its own ways which can be
very different from other databases, one thing is if
you try to get meta data from the connection objm you
will fail, as a result, there is no easy way to find
out all the tables in the database, for example. You are right about this, I forgot it was missing, and if I were to categorize it I would say it' a significant piece that is missing when using Access.
there
is no jdbc driver for access, you need to use odbc and
jdbc. another baad thing is it is single threaded, may
not be suitable for mutiple users, especially on the
web. it crashes where other databases ususally wont.
man, i have some experience with it - bad!Not everyone has had bad experience with Access, your mileage may vary.
mySQL on the other hand, is a more normal database,
its speed is as great as oracle, and it is muti
threaded, great for almost all things, including
learning databases. it is free, open source...mySQL as fast as Oracle? I'll check with Larry E. and get back to you...

Currency Converion and Business Rule questions

Hi all,
I am new to BPC and would appreciate if you can help me answer few of my questions. I was going through how to documents on currency conversion and Business Rules.
1. The Flow in Currency Conversion and Business Rules different?
2. Can Currency conversion be done without defining the Currency Rules?
3. In Business Rules Detail there is a cloumn for Sign. How should one determine what sign should go for a given account?
Thanks,
Diksha.

Venkatesh,
It seems like you are using Company as your Entity type dimension.
Try to change your code to look like this
*RUN_PROGRAM CURR_CONVERSION
     CATEGORY = %CATEGORY_SET%
     SELECT(%CURRENCY_SET_ID%,"[ID]",CURRENCY,"CURRENCY_TYPE='R'")
     TID_RA = %TIME_SET%
     RATEENTITY = GLOBAL
    OTHER = [COMPANY=%COMPANY_SET%]
*ENDRUN_PROGRAM

Oracle Business Rules Question

Hi,
I'm pretty new with Oracle Rules. I've had no trouble using them, to date. I define Java classes, set up the facts in Rules Author, and create the Dictionary, Ruleset, and rules... etc.
I can run them fine, and the technology works as expected. My question is... what if my underlying data structures for the facts (the java class(es) in my case) change?
From what I see with the Rules Author tool, there isn't an obvious way to sync up the underlying fact with events on the ground. I can see there would be a really good reason for not allowing attributes/methods/props to be removed (without redoing (some of???) the rulesets/rules)... but I am really interested in the ability for adding methods/attributes/etc to the underlying structures without rework.
Here is my use case: I set up an initial fact and a ruleset for our clients with which to build rules. They add 500 rules. They now request the "fact" include another "new" attribute to be available in all new rules. Do I have to start over, and redo the 500 rules to accommodate the new attribute? There must be something which eases the pain... but I haven't found it yet.
Any help in this issue would be most appreciated!
Thanks,
Dan

Thanks for the reply. I guess I was making it more difficult than it deserved. I've been trying to "re" import... and never tried to import over the fact I already had.
Thanks!

New Switcher Mail Rules Question

Hi everyone. I jsut switched and in setting up Mail I want it to move all mail from a specific account to a Folder( don't want to use the inbox for this account). When I setup the rule to move all mail from account X to folder Z, Junk mail rules are no longer followed. I want it to do the message moved based on the account, but I STILL want the JUNK rule to be active so it filters the junkmail then does the message moving.
Make sense?
Hope someone can help.
Lawrence
Macbook pro yo! Mac OS X (10.4.6) all pimped out

Lawrence,
I had been thinking, already, about what to do if this did not work. It occurred to me that the Junk filter might be putting the messages in your other mailbox, INSTEAD of the Junk mailbox, and not as a result of your Rule to move the messages.
One way to test this possibility would be to remove your Rule to move the incoming messages, and see where the Junk filter would then place the junk messages. Your folder would still be available, and if junk mail still found its way there, we would know the answer. In this approach, you could later rewrite the Rule, and have it apply to all messages already in the Inbox.
The other approach would be to change the preferences for Junk, to go back into Training, which should remove the Junk folder. Quit Mail, and then reset Junk to be in Automatic, which then would create new Junk folders.
Still another approach would be to remove all Mail Preferences, and set things up again (but not losing any mailboxes) -- I do not like this approach, for now.
Ernie

Experience rule question (a possible limitation?)

Similar Messages

Maybe you are looking for