Experienced LabVIEW Engineer looks for part time projects

Swedish LabVIEW Engineer with over 5 years of experience. Speciallity: analysis and Vision applications.
Looks for smaller part time projects (that can be performed at distance).

Hi,
I have 6 years of experiences in labview application.I would like to develop the code through the internet.
Kindly let me know if the openings still available.

Similar Messages

CLD Certified Engineer Looking for Part Time Job

I am a Certified LabVIEW developer with around 3 Yrs of experience in developing LabVIEW based applications. I am currently working on Version 8.5. I have worked with Analog, Digital, GPIB, CAN, J1850 and Serial protocols. I have also worked on Non NI devices such as AB PLC controllers. I have developed small to complex standalone applications. Some of them were production in-line systems.
I can work in the evenings and during weekends. I can send my resume if needed.

I am interested in reviewing your resume. Please send to [email protected]

MSEE, CLAD, 2 years exp, looking for part-time projects

Serviced fields: Imaging, Optics, Biomedical Instrumentation
[email protected]

Hi,
I have 6 years of experiences in labview application.I would like to develop the code through the internet.
Kindly let me know if the openings still available.

CLA/CTA - looking for part-time challenges - San Francisco Bay Area

I am looking to do some freelancing and/or part-time work towards LabVIEW/TestStand. Please send me a private message if interested and I can share details.
Kudos always welcome for helpful posts

Seeking help to delete calls to a Martox frame grabber and install NI-1433.
If interested, please call 5129213691
Thanks
Stan Jasinski
VisTec Engineering

LabVIEW Engineer looking for job

I have attached my resume to review.
Attachments:
Resume.pdf ‏50 KB

Dear Sir / Madam,
I am an experienced engineering professional skilled in Post Silicon Validation by Automating using LabVIEW, Power Measurements, Jitter Measurement & Analysis, Audio Characterizations, Silicon Validation Test Cases, Multi-Channel Data acquisition and Triggering using NI DAQ Cards, Control Systems, Serial Communications using VISA and Serial I/O Interface, Code Native Interfaces, Call Library functions to interface with third party and custom dlls, ATMEL and PIC Micro Controller programming, Temperature Controllers like Honeywell, ESPEC-641, TestEquity 115, Hand held terminal programming to drive servo motors, C/C++/VB Programming for developing embedded applications.
Good experience on Windows API, protocol implementations, ARM11 & ARM7TDMI on-chip programming using Register Map and Pinout Specs using C/C++ Metrowerks Code Warrior and MULTI-ICE for ARM Debugger.
Looking for L1/H1 Job
Thank you for your time and consideration.
Please find an attachment of my resume in MS-Word format.
Sincerely yours,
K.Sowjanya. B.Tech
Message Edited by Support on 04-04-2008 08:39 AM

Labview engineer looking for job in china

I am a labview engineer for more than one year in philips lighting (shanghai china).Working on labview7 and RS232,GPIB interface instruments.Now I looking for a job in shanghai china.
more detail please contact [email protected]

Hi Alec,
Your organisation sponsor visa for non-local residents?

Houston based Oilfield company looking for part time help

i-Tec Well Solutions, a Houston Texas based company, is looking for someone to set up existing pressure transducers and load cells to work with existing Labview Signal Express software. This should be a short term contract job, which would include:
Wiring up all equipment for easy and frequent use.
Installing software on a dedicated shop computer.
Programing the software for collecting pressure data and force data.
Recommendations for purchasing additional equipment.
Recommendations for purchasing additional equipment to equip existing analog pressure pumps.
Design and build a stand-a-lone shop test cart for mounting/storing all essential equipment.
If interested, please contact Dennis @ [email protected]
i-TEC Well Solutions
5535 Brystone Drive
Houston, TX 77041
web: www.i-tec.no
email: [email protected]

Hello Joe:
Do you need someone on-site? I could offer you remote work with the best pool of designers and DPS experts? We have been using it since the initial publi release in 2011
Email me if you are interested => [email protected]

Looking a part-time job

Dear all:
I've use LabVIEW to develop test software more than 4years. I'm looking a part-time job now.
E-mail: [email protected]
¤╭⌒╮ ╭⌒⌒╮
╱-◥?80?80◣ ╭ ╭
︱田︱田田|
Boone Mail:[email protected]
QQ:24732458
QQ Group:13267790
QQ Comp: 17756234
╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬
Boone

This thread is for posting of job openings, You will probably have better luck posting on the thread for those looking for positions.
P.M.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Analytical Instrumentation labview programs, Looking for caretaker specialist

Our existing Labview software(s) need a caretaker. We like to have you to translate current Labview programs to .NET(VB) programmer. And I hope that you can tidy up existing source codes so that it can be maintained by not-so-experienced Labview programmers. For now, we are looking at contract programmer in San Dimas, 40miles east of Los Angeles. We are bunch of scientists know programming in general.

Great! next door. Would you be able to send me your CV ?
Our website is www.microspectra.com.
My email is [email protected]
Thanks, Jumi

Looking for a small project via internet (part time )

Hello!
I'm a beginer in labview with only one year experience in device programming (e.g.-power supply) and i search for some little project for develop my skills in labview.
I am available maximum 15 hours/week.
If someone is interested plese e-mail at [email protected]

You posted in the wrong forum. This one is for companies posting jobs. You want the one next to this one..

Looking for full time position using Labview and/or PLC's in Long Island NY area

I have 13 years experience using Labview for user interface/daq applications. I also have 20 years experience with Programmable Logic Controllers (PLC) programming for industrial machine controls. My resume follows:
Adam Wechsler
111 Holbrook Rd.,Holbrook,NY 11741,(631) 981-1013 [email protected]
Objective
Labview programming, virtual instrumentation, industrial machine controls,
automation, PLC, HMI, GUI, data acquisition
Education:
B.S. Mechanical Engineering 5/89
Polytechnic University, Brooklyn, NY
A.S. Engineering Science 5/86
Suffolk Community College, Selden, NY
(GPA 4.0 Dean's List Spring 1986)
Experience:
Controls Engineer 5/1994-3/2009
Vacuum Instrument Corp., Ronkonkoma, NY
*Program, troubleshoot, and upgrade automated Vacuum Chamber Industrial Leak Detection systems controlled by Allen Bradley PLCs in an OEM environment.
*Debug equipment functions and programs prior to shipping, at customer's site, and by phone.
*Integrate and install various types of peripheral equipment, barcode scanners and printers,
*Design and develop Labview graphical user interfaces and HMI applications including recipe management and data collection for industrial machinery.
*Write and review user manuals and installation instructions.
Production Engineer 10/1989-5/1994
Izumi Corporation, Yaphank, NY
*Program, maintain, troubleshoot, and repair PLC controlled hydraulic, pneumatic, and control systems for automation in a hands-on environment.
*Improve design for manufacturability of new products and prototypes to be urethane/injection molded.
*Program, maintain, troubleshoot, and repair six axis hydraulic paint spraying robots.
*Create interface between multiple PLC’s and central computer system.
*Improved design and productivity of high volume, computer controlled, robotic molding machine by 150%.
Consulting Projects:
*Created Labview user interface components, and recipe management system for the testing of motion control servos.
*Programmed Allen Bradley PLC machine logic for packaging machine for a food service supplier.
*Created Labview to Allen Bradley PLC setpoint and monitoring interface for electric motor-starter test stand.
*Programmed Allen Bradley PLC and PanelView operator interface terminal for cosmetic packaging assembly machine.
*Developed Labview application for Fourier and statistical analysis of myogram biomedical data for researching the efficacy of acupuncture treatment.
Other:
*Attended National Instruments Labview training courses, and regularly attend local Labview Users Group meetings as a long standing member.
*Member IEEE
*13 years experience with Labview
*15 years experience with vacuum chamber, mass spectrometer, and related technologies
*20 years experience with PLC's and automated systems
*Attended Autocad training course.
*Willing to travel

Will also consider contract, part time, or consultant work.

Electromechanical Engineer Looking for Interesting LabView telecomute work.

I am mainly looking for telecommuting work. Quick program development, debugging/consulting.
If you have a quick problem that you can't figure out or need an extra set of hands send me an email: [email protected]
I have 10 years of experience in data acquisition, control and automation, image acquisition (USB webcams and others), and interfacing with 3rd party hardware via GPIB, RS232, or other communications protocols as well as experince with various NI hardware ranging from simple daq cards and field point to synchronizing wave form generators. I also have experience in communicating with third party software, and hardware and electronics design, development and testing.
I am currently in a research facility which has allowed me to work in various interesting programs ranging from the aerospace to automotive industries in various capacities (LabView programmer, Hardware Development, Electronic Design, task manager).
Thanks again,

I am mainly looking for telecommuting work. Quick program development, debugging/consulting.
If you have a quick problem that you can't figure out or need an extra set of hands send me an email: [email protected]
I have 10 years of experience in data acquisition, control and automation, image acquisition (USB webcams and others), and interfacing with 3rd party hardware via GPIB, RS232, or other communications protocols as well as experince with various NI hardware ranging from simple daq cards and field point to synchronizing wave form generators. I also have experience in communicating with third party software, and hardware and electronics design, development and testing.
I am currently in a research facility which has allowed me to work in various interesting programs ranging from the aerospace to automotive industries in various capacities (LabView programmer, Hardware Development, Electronic Design, task manager).
Thanks again,

CLD electrical engineer looking for a work via Internet

Hello to all
Let
me introduce myself. I am an electrical engineer, with a more than
three years of full time experience in Labview programming.
I have a CLD certificate, which is valid until December 2013, with plans to upgrade to CLA.
My current place of work and living is in the Prague, Czech Republic, Europe.
My work responsibilities include work on many different projects and technologies and training for my colleagues.
On request, I can send you my CV.
Best regards
Bile

Dear mr. Bile
We are in the process of building a manufacturing plant run by a large number of servo motors, all to be controlled by LabView and connected to a SQl Azure database.
Do you have experience with servo motors and databases?
Are you available for some part-time work this winter?
Regards
Jørn Watvedt

Looking for SIMPLE time tracking app

Hi all
I'm looking for a really simple 'retrospective' time sheet app - wondering if anyone knows one?
I've seen literally hundreds, but they all want you to 'click to start the clock' and then click to end it. This doesn't work for me, as I spend only about 25% of my time in front of the computer.
What I'm looking for is something that I can put all my client contacts in, then separately link projects to those clients. Then at the end of each day I can quickly recall what I did during the day and assign time to each project.
Most apps want you to assign time to each project as you go through the day, so its relatively painless to switch projects. However when you do it all at the end of the day, you don't want to keep entering the date, you just want to enter the start/end time, and what project it was. More like a journal entry I guess.
Then at the end of the month it would print a report that groups the hours worked on each project so that you can review them and create an invoice (or in my case send to my accounts clerk who makes the invoice for me).
Any ideas from anyone would be greatly appreciated.
Thanks!

Hi shannonbray, welcome to the AppleWorks forum, which is intended for discussions of Apple's now-legacied productivity suite called AppleWorks.
One could develop such a template using the spreadsheet or database modules of AW separately or in combo,but it doesn't sound as if that's your aim. I'm sure clever types have done such things, and perhaps shared them to the AWUserGroups and such, and I hope they note your post and reply. There are certainly numerous clever folks who follow this forum, and they may have pointers to other apps for you, but essentially I think you've posed the wrong question in the wrong place.

[SOLVED] makepkg error: Why is it looking for '.part' files?

I've been seeing the following problem with every package I try to build with makepkg. The download works, but then makepkg complains that it can't find the source file:
==> Making package: android-sdk r20-2 (Fri Jun 29 11:01:35 CDT 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading android-sdk_r20-linux.tgz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 78.7M 100 78.7M 0 0 1640k 0 0:00:49 0:00:49 --:--:-- 2166k
mv: cannot stat ‘/usr/local/src/android-sdk_r20-linux.tgz.part’: No such file or directory
==> ERROR: Failure while downloading android-sdk_r20-linux.tgz
Aborting...
Why is it looking for the .part file, instead of the .tgz file? When I run makepkg again, without doing anything in between, it finds the .tgz file and goes on its merry way.
I'm using curl, and I haven't tried wget. Judging by my unscientific sample of forum posts it looks like wget is the de facto standard, so this may not be on anyone else's radar.
Here's my makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j4"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(fakeroot !distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs libtool emptydirs zipman purge !upx)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
OPTIONS=(strip docs !libtool emptydirs zipman purge !upx)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
PKGDEST=/usr/local/pkgs
#-- Source cache: specify a fixed directory where source files will be cached
SRCDEST=/usr/local/src
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Packager: name/email of the person or organization building packages
PACKAGER="Whitney Marshall <[email protected]>"
#-- Specify a key to use for package signing
GPGKEY="E4FB694E"
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
Last edited by wmarshall (2012-07-02 15:39:16)

It looks like this code is the culprit. I don't have time to dig into it right now, but presumably this works with wget. I would have thought any cmdline downloader would manage renaming the .part file itself...?
makepkg, lines 395-417 (pacman 4.0.3-2):
395 # replace %o by the temporary dlfile if it exists
396 if [[ $dlcmd = *%o* ]]; then
397 dlcmd=${dlcmd//\%o/\"$file.part\"}
398 dlfile="$file.part"
399 fi
414 # rename the temporary download file to the final destination
415 if [[ $dlfile != "$file" ]]; then
416 mv -f "$SRCDEST/$dlfile" "$SRCDEST/$file"
417 fi

Experienced LabVIEW Engineer looks for part time projects

Similar Messages

Maybe you are looking for