Experienced Labview Realtime Engineer wanted. Must be UK.

I am looking for an experienced Labview/ teststand engineer to develop software for our automated hydraulic test equipment. Please ask for job description. Must be able to work in UK.

I am going finish my M.Sc here in Sweden. I can work for you if you consider me as an option. I don't have any working visa in UK. I am basically from India.

Similar Messages

  • LabVIEW project engineer near Karlsruhe/Germany

    Hello,
    we are a company producing test- and measurement equipment for the automotive industry. We are looking for an experienced LabVIEW/Teststand engineer. Good knowledge of automotive interfaces (CAN, LIN, MOST), DAQ, Ni-Vision is a plus. German work permit and language is a must. A remote job is not possible. We welcome also freelancer.
    If you are interested, please send us your application to the following eMail address: [email protected]
    Thanks and best regards
    Patrick Volz
    Managing Director
    MCF Technologie GmbH
    Pforzheimer Str. 122
    D-76275 Ettlingen
    Germany
    Phone: +49 7243 94756 0
    www.mcf-technologie.de

    Dear Sir/Madam,
    My outgoing personality, my technical background, and my education make me a strong candidate for a position as Consultant (with a telecommuting preference) at Moore Good Ideas.
    My experience at Mississippi State University has made me a versatile, theoretical and analytical problem solver. With detailed technical reporting and proceeding presentations, the Aerospace Engineering Department has adequately prepared me for the specified duties in the position announcement.
    As you scheme through my resume, you will find that I have ample projects that pertain to this opening. You will discover the acquired computing and technical skills required to fulfill the assigned tasks. I can offer a high level of expertise in executing necessary simulations and detailed analysis.
    I hope to serve as a model and contributor if given the opportunity to be a member of your team.
    Sincerely,
    N. Emmanuel Okoro
    Attachments:
    Resume of Emmanuel Okoro.doc ‏33 KB

  • 2x LabVIEW Systems Engineer Full Time Positions – Sheffield and Bristol, UK

    2x LabVIEW Systems Engineer - Full Time Positions – Sheffield and Bristol, UK
    1.0      Description:
    As a Systems Engineer, you'll be part of a team that is responsible for developing both hardware and software applications based on Object Oriented Technology and Event based Architecture primarily in the LabVIEW Programming Language and National Instruments Hardware Platforms. You will help customers from all kinds of industries on various issues, from getting started with LabVIEW software, to help with programming, debugging and onsite commissioning of complex systems including distributed embedded systems. There will also be items such as creating demos and working on proof of concepts. You must exhibit strong problem solving, communication and business acumen skills alongside a passion for technology. You will get the privilege of an insight into the engineering practices from a range of industries and be providing a consultancy on their system requirements.
    2.0      Duties and Responsibilities:
    The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
    ◦     Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
    ◦     Developing intuitive GUIs.
    ◦     Selecting the correct measurement hardware for a given application based on a customer’s specification.
    ◦     Providing timely, accurate and effective solutions to technical problems.
    ◦     Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
    ◦     Reproducing and troubleshooting problems and incompatibilities in both software and hardware.
    ◦     Delivering professional and high quality, customer education courses.
    ◦     Delivering technical presentations and demonstrations to customers, colleagues and partners.
    ◦     Remaining aware of all competitive products and how they compare technically with Austin Consultants' core products.
    ◦     Working with the business development team to develop proof of concepts for customers.
    ◦     Travel 50% of the time.
    3.0      Qualifications & Requirements:
    ◦     Minimum 2.1 honours degree in engineering or science related field, such as Electrical/electronic engineering, physics, mechatronics or computer science.
    ◦     Firm understanding and knowledge of National Instruments LabVIEW and TestStand, including LabVIEW FPGA and LabVIEW Embedded.
    ◦     Understanding of object oriented principles.
    ◦     Ability to pass CLA exam within the year.
    ◦     Knowledge and experience in instrumentation & control, and industrial automation is required.
    ◦     Experience with all National Instruments hardware platforms, including DAQmx, cRIO, PXI, SCXI and cFP.
    ◦     Practical electrical debug experience.
    ◦     Experience in a second language of JAVA, C and C++ is preferred but not essential.
    ◦     Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
    ◦     Must be able to handle multiple tasks and enjoy working with people.
    ◦     Strong problem solving skills to analyse the problem and think creatively to provide a solution.
    ◦     Excellent written, oral and presentation skills are key.
    ◦     Ability to deal effectively with customers to make them successful is essential.
    ◦     Ability to get along with others and function as a team player as well as work effectively alone.
    ◦     A proactive/can do attitude is vital and a happy view on life.
    ◦     Legal right to live and work in the UK. Sponsorship is not available.
    ◦     Must hold a full clean and valid UK driving license.
    4.0      Location:
    There are two positions for this role, one in Sheffield, South Yorkshire, UK and one in Bristol, UK
    5.0      Reporting:
    Systems Engineers will report to the Technical Director.
    6.0      Salary:
    Competitive salary based on level of experience.
    7.0      Application:
    To apply for this position please send a copy of your CV to
    [email protected]
    Please state the job title of LabVIEW Systems Engineer and the location for which you are applying in the email subject.

    Hello,
    I Aravindu.P completed M.Sc(Electronics & Instrumentation).I have one year experience working with Labview and embedded systems programming(Software and Hardware).I am very hardworking and sincerity.I want to working with industries like this.So please reply me.
    Attachments:
    Aravind_Resume (1).docx ‏18 KB

  • Job Opening for Labview Test engineer and Senior Labview Test engineer in Honeywell Automation India Limited,Pune

    Job Openings at Honeywell Automation India Ltd., Pune
    Honeywell Automation India Ltd, Pune is currently looking Senior and Junior Labview Test Engineers.
    Position -Permanent
    Job Location: Pune,India.
    Job description is as follows:
    For Senior Labview Test engineer Position: (4-6 years)
    Primary Skills:
     • Should be an expert in NI Labview.  
    • Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW RealTime/FPGA toolkit etc
    • Experience on hardware test automation using NI and third party hardware
    • Candidate should have knowledge on various protocols such as RS-232, GPIB, MODBUS, Ethernet,Devicenet, Profibus using NI LabVIEW.
    • Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
    • Ability to work independently with our clients for gathering requirements, preparing various test plans, coding & testing, Installation & support
    • Candidate should have good communication skills, presentation skills and interpersonal skills.
    • Knowledge of analog and digital electronics that includes schematic reading and understanding
    • Knowledge on Database, driver development, communication protocols
     Niche Skills:
    • Knowledge of Project Development Life Cycle
    • Experience in NI Teststand/ LabWindows
    • Good Communication Skills
    • Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
    • Project deployment at client site
    • CLD (certified labview developer)
     Added Advantage:
    • Ready valid passport / VISA will be a plus point.
    • Candidate need to travel abroad depending on project requirements.
    • Shorter joining period.
    • Ready to relocate to Pune
    For Junior Labview Test engineer Position: (2-4 years)
     Primary Skills:
    • Candidate should have worked in NI LabVIEW for atleast 2-4 Years.
    • Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW Database toolkit,etc..
    • Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
    • Candidate should have good communication skills, presentation skills and interpersonal skills.
    • Knowledge of analog and digital electronics that includes schematic reading and understanding
    • Knowledge on Database, driver development, communication protocols
    Niche Skills:
    • Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
    • Project deployment at client site
    • CLAD (certified Labview associate developer)
    Added Advantage:
    • Ready valid passport / VISA will be a plus point.
    • Candidate need to travel abroad depending on project requirements.
    • Shorter joining period.
    • Ready to relocate toPune,India
    Please Forward your updated profile to [email protected]

    Dear Sir,
    With reference to the website of your company I came to know that there always are the vacancies for the suitable candidates and hence I wish to apply for the same.Currently working in hydraulic environment I am approaching you through this application with great enthusiasm, that I have scope and chance to show my ability and contribute my efforts in well direction. I am enclosing here with my complete Curriculum Vitae .
    I am currently working with M/s Minar Hydrosystems PVT. LTD. in Nagpur which is one of the largest manufacturers of hydraulic/pneumatic cylinders, jacks etc. I am In charge for quality department having complete knowledge of instruments with level II in non destructive and automated non destructive techniques. Also handling SAP module in current company with effective administration.
    If you need further information regarding my candidature please do write/call me.
    Thanks & Regards
    Rushikesh P. Deogade
    Nagpur, India
    Ph.:- +91 9923858523
    Attachments:
    B.E. Mechanical with 3 years exp as a QC Incharge.doc ‏25 KB

  • Job Opening - LabVIEW Software Engineer

    Belcan is an entrepreneurial and market driven organization committed to quality and customer satisfaction. Belcan is among the top 10% of the largest engineering firms in the country with over 6500 employees at 60 locations. The Advanced Engineering and Technology Division (AETD) of Belcan is a global provider of highly technical engineering services to a wide variety of industries.
    We are currently looking for a LabVIEW Software Engineer to design and develop LabVIEW software based automated test systems for advanced jet engines, digital controls, electrical systems, and digital avionics.
    Requires a Bachelor's degree in Electrical Engineering, Computer or Software Engineering or a related field, and 3 years of experience with National Instruments LabVIEW and other National Instruments products and technologies. Familiarity with the application of engineering concepts, practices, and procedures for: a) the development of digital system hardware interfaces b) interfacing computers, c) designing and developing automated test systems, data systems, and instrumentation. Familiarity with Real Time Operating Systems, embedded systems, and aircraft communications protocols is a plus.
    Due to the nature of the work being done applicants must be U. S. Citizens or permanent residents. These are direct full time positions. We offer a very competitive compensation and benefits program. Please email your resume to [email protected] Belcan is an equal opportunity employer. EOE/M/F/D/V

    The postion is located in Cincinnati, Ohio. 

  • Using Labview realtime module in RTAI

    hello everyone,
    i want to use Labview realtime module in RTAI for real time applications beacuse of it's free source and very good performance. is it possible to do this work?
    if it is, can anyone introduce some same case study or something similar to this?
    Solved!
    Go to Solution.

    amirsaman wrote:
    hello everyone,
    i want to use Labview realtime module in RTAI for real time applications beacuse of it's free source and very good performance. is it possible to do this work?
    if it is, can anyone introduce some same case study or something similar to this?
    I don't think that is possible for anyone outside NI. LabVIEW realtime supports at this time only Windows as development host and as target only National Instruments hardware with specifcally targeted OSes or the Pharlap ETS system on x86 systems with a somewhat specific hardware configuration. Using RTAI as target OS for LabVIEW realtime applications would require first some modifications to the LabVIEW realtime plugin to support this new platform.
    Also none of the LabVIEW realtime files created for either the NI platforms running VxWorks or Pharlap OS, or the Pharlap ETS system woud be possible to get deployed to a RTAI system, as they are not compatible. You would in the first place have to port the whole slew of shared libraries that make up the realtime LabVIEW runtime system on one of these targets to your RTAI system which is basically a completely new LabVIEW target platform that you can only create with quite a bit of effort from the LabVIEW source code. It's not really impossible for NI as most of the LabVIEW code is written quite platform independently but it would be a combination of the compile settings for current LabVIEW realtime, with settings to produce LabVIEW VxWorks realtime targets with some extra Linux settings. Yet it would be by far not trivial and some of the parts are actually hardware specific drivers which have to be ported too, and limit the possibility of what RTAI hardware could be used even further. In short not something that would make any commercial sense to NI as they would have to invest a lot of resources without any possibility to sell extra hardware.
    And hell is freezing up before NI releases LabVIEW source code in any form that would give non-NI employees access to it! 
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • NATIONAL INSTRUMENT​S LABVIEW REALTIME V6.1, NI-488.2 V2.01, CNC CADCAM

    IAR, NATIONAL INSTRUMENTS LABVIEW REALTIME V6.1, NI-488.2 V2.01, CNC CADCAM
    IAR,
    Microwave Design Office 2002, Cadence, OrCAD, Protel, FPGA, VHDL,
    Natinst, Xilinx, Siemens Simatic, Labview, metrowerks codewarrior8
    [2CDs],
    other 20 gigabytes/week software for pc and mac
    send email for catalogue

    Hello,
    Which driver have you on your computer ? You can see them in MAX >> Software. Which is version of ni-visa, ni-488.2 ?
    What kind of protocol do you want to use : gpib, serial, parallel ?
    What ahhpens in AMX when you test your communication ?
    What are error code and error string ?
    Regards,
    Isabelle
    Ingénieur d'applications
    National Instruments France

  • What is the data throughput in labview. I want to use the parallel as acheap digital i/o to drive a stepper motor.

    I am trying to use the parallel port on a win xp machine to send data a@ up to a 3k rate. This is for the the purpose of driving a stepper motor. I have tried the port.out vi and placed this vi in a loop and it on a scope it looks like I am limited to a a 200hz rate. What am I doing wrong??? Can labview do this or is it too slow ???
    Thanks

    snook wrote:
    > what is the data throughput in labview. I want to use the parallel as
    > acheap digital i/o to drive a stepper motor.
    >
    > I am trying to use the parallel port on a win xp machine to send data
    > a@ up to a 3k rate. This is for the the purpose of driving a stepper
    > motor. I have tried the port.out vi and placed this vi in a loop and
    > it on a scope it looks like I am limited to a a 200hz rate. What am I
    > doing wrong??? Can labview do this or is it too slow ???
    Basically the way the Port I/O VIs are implemented they call through a
    device driver for each port access. This slows down the maximum port
    accesses to something like 1000 times per second depending on the speed
    of your CPU.
    There is a way to do it faster but that is a little more trick
    y. The
    idea is to use a device driver to enable particular port addresses to be
    accessed directly from the application level instead of always going
    through the kernel.
    I have written such a VI library and accompagning DLL and device driver
    and made it available on OpenG. It is not yet part of the standard
    binary distribution packets so you will have to get it from the CVS
    repository.
    Go to:
    http://cvs.sourceforge.net/viewcvs.py/opengtoolkit/portIO/built/portio/
    and download all the files in there including the ones in the
    subdirectory "ogportio.llb" and if you like "docs"
    If you want the nitty gritty technical details you can also look at
    http://cvs.sourceforge.net/viewcvs.py/*checkout*/opengtoolkit/portIO/c_source/Description.htm?rev=1.5
    On my 866 MHz Pentium mobile I can increase the number of port accesses
    in this way from 440 ms for 4000 read byte port accesses (100us ms per
    access) to 20 ms for the same number of read accesses (5 us per access).
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Electrical​/Software (LabVIEW) Design Engineer, Wiltshire, UK

    Job Title: Electrical/Software (LabVIEW) Design Engineer
    Job Type: Permanent
    Location: Malmesbury, Wiltshire, UK
    Job Purpose:
    To provide design solutions for machine control, instrumentation and data acquisition using National Instruments LabVIEW. Support and maintain systems throughout Dyson Ltd. 
    Principal Accountabilities:
    Design of software using National Instruments LabVIEW for control and data acquisition
    Support existing National Instruments LabVIEW systems
    Design, manufacture and installation of safety and machine control circuits
    Design bespoke signal conditioning PCBs
    Write specifications and manage sub-contract design and manufacture resource
    Skills Knowledge & Experience:
    Essential:
    HND in Electrical/Electronic engineering with 5 years experience
    Attendance at National Instruments LabVIEW Intermediate 1&2 with 5 years programming experience
    Desirable:  
    Working knowledge of National Instruments hardware product range
    PCB design (Mentor Graphics)
    Experience of PLC programming
    Formal training in CE directives on Machinery, Low Voltage and EMC.
    Knowledge of BS7671 Electrical Installations (IEEE 17th Regs)
    Behavioural:
    The ability to communicate appropriate, concise and accurate information across the business (technical and non-technical) is essential for the successful applicant.
    You will be a highly driven individual who strives for accuracy & quality in work delivered.
    You will be able to solve problems in a logical way, pre-empt future problems and seizing opportunities without waiting to be told.
    The proven ability to work as part of a team or un-supervised to an agreed goal or set of deliverables is imperative.
    For more detail visit our website: www.careers.dyson.com
    Contact: [email protected]

    I AM WORKING IN LABVIEW FROM 6+ MONTHS WIHT PXI.
    I AM VERY ENTHUSIATIC TO WORK IN LABVIEW
    i am from INDIA
    MY EMAIL ID IS [email protected]

  • Does PXI-8109 Support Labview Realtime 8.5.1?

    I am having trouble installing labview realtime 8.5.1 onto the PXI-8109.  Does this embedded controller support this version? If not, what's the lowest version does it support?
    Thanks,
    Andy

    Hey Andy,
    With the PXI-8109RT you can only use LabVIEW Real Time 2010 or later. You can see this on the product page of the NI PXI-8109RT. The second bullet on the product page talks about this.
    Regards,
    David A.
    National Instruments
    Applications Engineer

  • Comunicacion Lookout Labview Realtime

    Amigos National Instruments,
    Como puedo comunicarme entre lookout y una aplicacion  labview realtime dentro del PLC cFieldPoint?
    Codial Saludo,
    ManuelB
    ¡Resuelto!
    Ir a solución.

    Hola Arturo,
    Gracias por responder y por su tiempo,
    Mira si yo realizo la aplicación utilizando Labview para monitorear y controlar el programa cFieldpoint no tendría problemas porque el intercambio de los datos es fácil y directo.
    Yo también puedo monitorear y controlar la misma aplicación desde lookout a través de el protocolo Datasock, pero tengo que tener abierto  labview como interfase entre los dos Scada, necesito solamente que lookout coloque  los setpoint del proceso.
    Lo que busco es sí se puede a través de este protocolo y otro medio poder controlar el programa que esta corriendo  compilado dentro del cFielpoint directamente desde lookout sin la necesidad de tener corriendo Labview.
    Cordial Saludo,
    Manbe

  • Using Keyboard or Mouse in LabView RealTime

    Hi,
    I would like to know whether keyboard or mouse can be used as input in LabView RealTime. If yes, can anyone explain me how to get the input coming from the keyboard or mouse?
    Thanks

    Hi e_Rik,
    Could you explain what you are trying to do a little further?  Currently the only real-time targets that can have a keyboard or mouse plugged into them is a PXI chassis or a desktop ETS system. 
    The following links also touch on the subject as well.
    http://forums.ni.com/ni/board/message?board.id=170&message.id=147602&requireLogin=False
    http://forums.ni.com/ni/board/message?board.id=170&message.id=149424&requireLogin=False
    http://forums.ni.com/ni/board/message?board.id=180&message.id=27461&requireLogin=False
    I double checked and currently there are no keyboard or mouse VIs that work on real-time targets.  You may be able to get around this by finding a serial keyboard and mouse and using VISA calls.  Hope that helps clarify, and have a good day.
    Brian K.

  • Labview realtime desktop PC : unable to install software

    I have a Labview realtime desktop PC which was running OK until this afternoon.
    I tried to use the Realtime System Replication.  It wasnt able to copy my config because my app was too heavy and ftp was sloooow.
    I used ftp to delete my app from the target PC.
    From this point I wasn't able to work with the target PC.
    At boot time I've got this message:
    ...Transferring control to user program.
    ...Labview RealTime desktop PC boot loader
    ...Copyright …
    ...Searching hd for boot program .. not found.
    ...Using safe mode program
    ...Init network
    ...Device 1 … MAC .. IP
    System State : No software installed
    When I try to maintain the system via measurement explorer, I'm able to modify the network configuration and to reboot the target.
    Measurement explorer displays "Connected - no software installed" in the status bar (as a matter of fact it displays "Connecte - aucun logiciel installe", I'm using a french version). If I try to install software with the dedicated button ("Add/remove software" I guess) I get a message box displaying an error 59
    Thanks in advance
    Nicolas

    Nicolas,
    Is it possible you inadvertently removed a required file when you FTP'd to the target? I get the impression that the host no longer knows what is installed on the target nor can it repair it.
    Within MAX you can create an Uninstall Disk (option 1) or a Format Disk (option 2). Neither are desirable options, granted, but if the Add/Remove software option throws an error, then I suspect your target has been corrupted. Hopefully someone with more knowledge can translate your specific error code....
    Regards,
    Message Edited by mepausle on 12-20-2006 12:38 PM
    Matthew Pausley
    NC State University
    Raleigh,NC

  • Immediate need for LabVIEW Test Engineer in San Diego, CA

    Greenlight Technical Consulting has an immediate for a LabVIEW Test Engineer to work on site at our client facility in San Diego, CA.  For this position we are seeking people that have experience with LabVIEW 8.5 or 8.0.  In this role you will be required to assist in the design and evaluation of new systems and the building of test fixtures. You will also be running tests with LabVIEW 8.5.  On a limited basis you may be responsible for programming circuits and test fixtures.
    The duration of this assignment is for at least 3 months.
    Please email your resume to [email protected]
    Laird B. Goolsby
    Greenlight Technical Consulting, Inc.
    225 Broadway Suite 302

    Hi
    I would like to know the working hour. Can it be flexible + weekend?
    Thank you

  • Experienced LabVIEW engineer, Specializing in Semiconductor and Biotech/DNA applications; Bay Area or Online

    I am an engineer-turned-LabVIEW programmer with 14 years of LabVIEW and industry experience in the San Francisco Bay Area
    I have worked and programmed the following types of systems:
    Semiconductors
    Bioinformatics/DNA Synthesis and Sequencing
    Digital Imaging
    Fermentation
    Solar Energy
    Chemical Processing Systems
    General Automation and Custom Analysis
    Real-time and Embedded Systems
    I can provide CORP-to-CORP hourly contracting, or it may be possible to work out licensing agreements, depending on your needs and the product.
    Please contact me at [email protected] and see http://www.zojosoft.com for  more information.
    Jed Davidow

    Dear Sir,
    With reference to the website of your company I came to know that there always are the vacancies for the suitable candidates and hence I wish to apply for the same.Currently working in hydraulic environment I am approaching you through this application with great enthusiasm, that I have scope and chance to show my ability and contribute my efforts in well direction. I am enclosing here with my complete Curriculum Vitae .
    I am currently working with M/s Minar Hydrosystems PVT. LTD. in Nagpur which is one of the largest manufacturers of hydraulic/pneumatic cylinders, jacks etc. I am In charge for quality department having complete knowledge of instruments with level II in non destructive and automated non destructive techniques. Also handling SAP module in current company with effective administration.
    If you need further information regarding my candidature please do write/call me.
    Thanks & Regards
    Rushikesh P. Deogade
    Nagpur, India
    Ph.:- +91 9923858523
    Attachments:
    B.E. Mechanical with 3 years exp as a QC Incharge.doc ‏25 KB

Maybe you are looking for