Experiencing 2 kinds of Slowdowns with WRT300N
Hi i have newly installed my wireless router WRT300N it has the standard options on.. With a ppoe internett connection.
Problems:
1.When a person downloads using wireless on the router(not using even close to full bandwith) all the other users connected experience a 90% slowdown on the're internett connection.
Is this normal? with a wired router this has never been a problem.
2.When using slower wireless netword cards then 54 mb/s the internett speed is reduced to 64k/64k instead of the full speed. while the ones connected 54 mb/s have full speed on there internett connection.
Is there a option where i can speed up the connection with this setup?
Thanks for reading any help would be great.
I had 2.00.08 when i posted.. Tried upgrading the firmware to the one in the downloads section (2.00.13) But the upgrade got only to 20% and shutdown.. Trying to get the router reset to factory defaults now to get it to work... Functions only as a wired switch now.. With no dns service or gateway whatsoever.
Does anyone know how to reset to factory conditions without having the router setup page available?
Message Edited by Zanaxal on 09-23-200611:34 AM
Similar Messages
-
Extreme system slowdown with G5 single and Time Machine.
I am experiencing extreme system slowdown with Time Machine on my G5 1.8 single (PPC). Most of the time it works fine with my system, but there seem to be peak loads where it can take five minutes to command-tab switch between apps. Other times during the same backup, TM functions within acceptable parameters. Is there anything that can be done about this?
I am experiencing extreme system slowdown with Time Machine on my G5 1.8 single (PPC). Most of the time it works fine with my system, but there seem to be peak loads where it can take five minutes to command-tab switch between apps. Other times during the same backup, TM functions within acceptable parameters. Is there anything that can be done about this?
-
I am having all kinds of trouble with itunes and updating my ipad. I open itunes up but it doesn't do anything except open to a blank screen. I try to access the itunes store but it won't go there. When I connect my ipad, and try to update it, it starts and then I get a message that says backup cannot be saved on this computer. I have tried everything suggested to no avail. This is the 2nd or 3rd time I have had problems with itunes. Sometimes I even get a message that I am not connected to the internet.
I have uninstalled and re-installed. Any help?You might not have enough space left on your hardrive.
-
I would like to remove a short gray edge from two images. I need help in that I am not yet able to use PhotoShop. Could somebody kindly help me with this?
I doubt it Doc Maik, but I am certainly happy to learn The image is this one (and a similar one). They would be beautiful portraits if not for the "extra mouth". The grey edge that I would like to remove is the excess of (grey) mouth that is actually my horse's chin, but that in the pictures looks like a wider, looping mouth. Practically, looking at the picture, the "extra mouth" to the left. What I would love it to be able correct that to look like a normal mouth, which means that half of the protruding edge should be removed. I am not sure I was able to explain myself, but here is one of the two pictures. I thank you for you kindness in being available to advise me.
-
i am having a problem with my iphone 4s. it is not displaying its volume bar in music or anywhere when not connected to earphones. kindly help me with its volume settings.
Have you tried the restart/reset/restore troubleshooting path? That would be the best initial set of steps to take, particularly in a situation like this.
-
Watching movies from iTunes and Netflix, the subtitles shows yellow, too small and into gray boxes! I'm having this kind of trouble with my iPad also.
Solution found.
I am a Vodafone customer and installed the Vodafone app which asks you to turn off wifi connection on installation as it needs to communicate with their servers over 3G.
After restoring the iPad via iTunes this is the only app that I did nor re-install and seems to be too much of coincidence that while in full screen view watching films my wifi is switched off and 3G data connection is established 10 - 15 minutes into a fiilm and my data allowance gets eaten up!
I would also get push notifications from Vodafone saying "my daily data usage was almost used" with this app installed.
Have tested and on 3rd time watching sky go still wifi is on after 30 mins.
DO NOT INSTALL VODAFONE APP FROM THE APP STORE. -
good day my question is , does anyone of you experiencing when making a call with facetime the phone shuts off and restart
See this veeeeeeeeeery long thread.
https://discussions.apple.com/thread/3404857
It's an issue with hundreds of phones. Some claim it's software related, some hardware, some say it's a mixture of both.
Some people have had temporary success with quitting the Phone.app / restoring as a new phone / restoring from an iCloud backup / disabling Siri / toggling speakerphone on & off...
Unfortunately all of the above only been temporary, with the problem recurring again after a few calls, or a few days etc.
So far the only solution that seems permanent has been to replace the phone. But even so, it's the luck of the draw to recieve a functional phone, and not another faulty one.
I'm completely annoyed as there is no Apple Store near me...... and Apple haven't even acknowledged the issue, despite the above thread being 34 pages long, as of writing. -
Kindly help me with my zen touch firmw
Hii have zen touch, i made a mistake and tried to upgrade my zen touch firmware and i have media player instead of 0, so my zen now dont have any firmware, i removed the media player from my pc but i cant run the firmware upgrade unless there is a initial firmware installed on my zen, now my zen is on the recovry mode only.?kindly provide me with the original zen touch firmware.?i'm from iraq so i dont think that i can send my zen to Creative company in order to make a service to it.?i cant li've with out my zen, please provide me with a link for the original firmware
hidetoshi,
Try running Cleanup option in the player Rescue mode first.
Jason -
Hey! My flash player keeps crashing whenever I open any kind of website with any flash contend.
Hey! My flash player keeps crashing whenever I open any kind of website with any flash contend. Videos won't load, moving advertisements, all that stuff. Its also not just Firefox, videos don't work in IE or Chrome. I'm completely updated on all the plugins as well. Thanks for any help you may have!
IE uses a different version of Flash (ActiveX version) than Firefox and Chrome use (the Plugin version). You might want to try the Adobe Flash forums for help with those Flash problems. <br />
http://forums.adobe.com/index.jspa -
Sudden massive slowdown with macbook pro
my macbook all of a sudden is running super slow as in won't even properly load youtube videos. i upgraded to mavericks awhile back but never had problems. i ran a etrecheck, results below. if any suggestions please let me know thanks!
Hardware Information:
MacBook Pro (13-inch, Early 2011)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 3:6:49
Disk Information:
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (365.99 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.google.keystone.daemon.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
Launch Agents:
[System] com.google.keystone.agent.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[not loaded] com.divx.agent.postinstall.plist 3rd-Party support link
User Login Items:
iTunesHelper
Google Drive
Popup
Notify
Internet Plug-ins:
o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
OVSHelper: Version: 1.1 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.7 3rd-Party support link
FlashPlayer-10.6: Version: 11.9.900.117 - SDK 10.6 3rd-Party support link
DivXBrowserPlugin: Version: 2.2 3rd-Party support link
Silverlight: Version: 5.1.20125.0 - SDK 10.6 3rd-Party support link
Flash Player: Version: 11.9.900.117 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
SharePointBrowserPlugin: Version: 14.1.0 3rd-Party support link
AdobePDFViewer: Version: 10.1.7 3rd-Party support link
CouponPrinter-FireFox_v2: Version: Version 1.1.6 3rd-Party support link
DirectorShockwave: Version: 11.6.3r633 3rd-Party support link
Safari Extensions:
DivX Plus Web Player HTML5 <video>: Version: 2.1.2.145
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
Google Earth Web Plug-in: Version: 6.1 3rd-Party support link
3rd Party Preference Panes:
DivX 3rd-Party support link
Flash Player 3rd-Party support link
Old Applications:
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Epson Printer Utility 4: Version: 9.19 - SDK 10.5 3rd-Party support link
/Library/Printers/EPSON/InkjetPrinter2/Utility/UT4/Epson Printer Utility 4.app
Quick Note: Version: 1.3.2 - SDK 10.0 3rd-Party support link
Time Machine:
Time Machine not configured!
Top Processes by CPU:
3% WindowServer
2% EtreCheck
0% CPULed
0% Google Drive
0% natpmpd
Top Processes by Memory:
127 MB com.apple.IconServicesAgent
119 MB Google Chrome
94 MB Google Chrome Helper EH
70 MB Google Drive
66 MB Google Chrome Helper
Virtual Memory Information:
859 MB Free RAM
1.50 GB Active RAM
688 MB Inactive RAM
1012 MB Wired RAM
925 MB Page-ins
0 B Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps Model; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm POST; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;/Apple|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm Heat; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=; fdesetup status | grep -q On && o=on; Ps FileVault; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel log"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=; defaults read /Library/Preferences/com.apple.alf globalstate | grep -q 0 || o=on; Ps Firewall; o=`scutil --proxy | grep Prox`; Pm Proxies; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm TCP/IP; R && o=`sudo profiles -P | grep : | wc -l`; Ps Profiles; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc hosts <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "App check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`find .??* -path .Trash -prune -o -type d -name *.app -print -prune`; Pm "Hidden apps"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font issues"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps UID; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Anyone else having terrible slowdown with Mail? Mine is at standstill. Grrrr.
Anyone else having terrible slowdown with Mail? Mine is at a standstill. Help!
It just keeps saying that messages cannot be displayed at this time. Been going on, on all devices, for about half an hour or more.
-
Is anyone else experiencing arbitrary loss of communication with peripherals (like back-up disk)
Is anyone else experiencing arbitrary loss of communication with peripherals (like back-up disk)? The problem on my iMac also seems to involve my HP 2355 printer which ghost-enlivens periodically and resets itself like it has lost power or communication with the computer. I had the same problem on my MacBook Pro. I couldn't figure out why the printer screen was lit up when no one was using the computer. The loss of communication with the back-up disk also happened on the Pro. Two different Apple models; two different computers; two different back-up systems; two different printers. So, I am thinking it is not limited to one computer or computer type or printer.
None of the issues you describe occur on my iPad in iOS 5.
To begin with, reset your iPad: Press and hold the Sleep/Wake + Home buttons at the same time, until you see the Apple logo appear. -
Internet hangs, slowdowns with Mountain Lion (10.8.2)?
Repeated internet hangs and slowdowns with ML, both on new MacAir and older MBP. 10.8.2 update didn't cure.
Did you try creating a new location and deleting the old one? Just renewing the DCHP on its own may not be enough. Follow all the instructions here, first:
http://osxdaily.com/2012/08/02/fix-os-x-mountain-lion-wireless-connection-proble ms/
If that doesn't work, have a look at my further instructions here:
http://applehelpwriter.wordpress.com/2012/08/07/problems-with-wifi-safari-and-mo untain-lion/
(ToU Disclaimer: links to my site contain other links which promote my services as a technical writer) -
Just as the question says
Does AirPrint work with all kinds of printers with moden usb capability.
AirPrint works if you have an AirPrint compatible printer. See this Apple support document for details on compatible models.
http://support.apple.com/kb/HT4356
If the printer is not AirPrint compatible, it still might be possible to enable printing by installing an App like Print Central on the iPad, iPhone, or iPod.
PrintCentral Pro for iPhone/iPod Touch - iTunes - Apple
Does it also work with android based devices?
I would be surprised if it did, but best to ask that question on an Android support forum. -
What kind i do with this issue on this iphone
what kind i do with this issue on this iphone any recomendation
Well, you have encountered the activation lock on the phone and there is absolutely nothing you can do about this.
Where did you get the phone from? You need to contact the previous owner of the phone to get this information and if you can't, then the phone is useless to you and you will never be able to use this phone again.
Congratulations on owning a very expensive paperweight.
Maybe you are looking for
-
How to make all rules active in Mail
Every time I sync my MacBook with my IMac through Mobile Me, the rule sync OK but it deactivate my rules. I have to click on every single one again to make them active. Is there a faster way to make all the rules active at once. TIA.
-
When I lock my screen I can't slide it to unlock I can unlock by the finger print but once on home screen I can swip or press any apps
-
Hi All, I have a senerio. My landscape is R/3 - > XI -> FTP Server -> SAP POS Triversity. Data ones moved out of XI gets stored in FTP server, on daily basis . Files from FTP servers are picked up by SAP POS Triversity.Files remain
-
Do i have to use .h files to call .dll files?
Dear, Now i want to use labview to control an instrument. And the instrument company give their dll files. When i use tools---> import---->share library,labview tells me import .h file,but their are many .h files,you know you can just choose only one
-
Can I use 1 (company) apple account to install a (free) app to several iphones?
With our company, we have an app in the app store. But suppose we have some company iPhones that we want to use for promotional issues. More concrete: we would like to install the app on those (10) iPhones, so people (journalists, politicians) can le