Experiencing crashing in only one app recently

Does anybody happen to know why my notes app crashes before it opens completely?!, Does anybody happen to know why my notes app crashes before it opens completely?!

Try these two things and see if they help.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit the Notes App and restart.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If the app continues to crash, I would assume that you have a corrupt note that is causing the problem - but it's just an assumption ....

Similar Messages

  • Why is my macbook pro running slow.  It runs slow even if only one app is open, especially if it's a browser.  I don't know how to read Etrecheck, but was hoping someone who does can help me out.  Would be super grateful.  :-)

    Hi.  This is my first time posting.  My Macbook Pro with Os X Mavericks has been running super slow since before I installed Mavericks so I'm pretty sure it's not the OS that has the problem.  It runs slow even if only one app is open, especially if it's a browser, particulary google chrome.  If mail is open...forget about it, down to a crawl.  I don't know how to read Etrecheck, but was hoping someone who does can help me out.  Would be super grateful.  :-)
    P.S. - Also, it sounds like something is loose inside my mac.  How should I proceed?
    Thanks in advance.
    Hardware Information:
              MacBook Pro (13-inch, Late 2011)
              MacBook Pro - model: MacBookPro8,1
              1 2.8 GHz Intel Core i7 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics 3000 - VRAM: 384 MB
    System Software:
              OS X 10.9.2 (13C1021) - Uptime: 0 days 23:21:37
    Disk Information:
              APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 749.3 GB (603.2 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-8A8 
    USB Information:
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Computer, Inc. IR Receiver
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Gatekeeper:
              Mac App Store and identified developers
    Kernel Extensions:
              [not loaded] com.leapfrog.driver.LfConnectDriver (1.8.0 - SDK 10.7) Support
              [not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) Support
              [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) Support
              [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) Support
              [not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) Support
    Problem System Launch Daemons:
              [failed] com.apple.wdhelper.plist
    Problem System Launch Agents:
              [loaded] com.paragon.NTFS.auth.plist Support
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist Support
              [loaded] com.google.keystone.daemon.plist Support
              [loaded] com.leapfrog.connect.shell.plist Support
              [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
              [loaded] com.microsoft.office.licensing.helper.plist Support
              [running] com.sophos.autoupdate.plist Support
              [running] com.sophos.intercheck.plist Support
              [running] com.sophos.notification.plist Support
    Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist Support
              [loaded] com.google.keystone.agent.plist Support
              [running] com.seagate.SeagateStorageGauge.plist Support
              [running] com.sophos.uiserver.plist Support
              [running] org.chromium.chromoting.plist Support
    User Launch Agents:
              [loaded] com.adobe.AAM.Updater-1.0.plist Support
              [loaded] com.adobe.ARM.[...].plist Support
              [failed] com.adobe.ARM.[...].plist Support
              [loaded] com.facebook.videochat.[redacted].plist Support
              [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
              [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
              [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
    User Login Items:
              Activity Monitor
              Dropbox
              Google Drive
              younity
              EvernoteHelper
    Internet Plug-ins:
              o1dbrowserplugin: Version: 5.2.4.18058 Support
              nplastpass: Version: 2.5.5 Support
              Default Browser: Version: 537 - SDK 10.9
              AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
              FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
              Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
              Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
              QuickTime Plugin: Version: 7.7.3
              googletalkbrowserplugin: Version: 5.2.4.18058 Support
              SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
              AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
              JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    Safari Extensions:
              Slick Savings: Version: 1.0
              Slick Savings: Version: 1.0
              Surfon: Version: 1.2.2
              Pearltrees Extension: Version: 6.0.13
              Mindomo Bookmarks: Version: 1.0
              Ebay Shopping Assistant: Version: 1.1
              Zootool: Version: 0.7
              Amazon Shopping Assistant: Version: 1.1
              Pocket: Version: 1.7.1
              Searchme: Version: 1.3
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User iTunes Plug-ins:
              TuneUp Visualizer: Version: 2.4.0 - SDK 10.6 Support
    User Internet Plug-ins:
              Picasa: Version: 1.0 - SDK 10.4 Support
    3rd Party Preference Panes:
              remoting_host_prefpane  Support
              Flash Player  Support
              Paragon NTFS for Mac ® OS X  Support
    Time Machine:
              Mobile backups: ON
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 697.84 GB Disk used: 136.06 GB
              Destinations:
                        NO NAME [Local] (Last used)
                        Total size: 3.41 GB
                        Total number of backups: (null)
                        Size of backup disk: Too small
                                  Backup size 3.41 GB < (Disk used 136.06 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   6%          Activity Monitor
                   5%          WindowServer
                   1%          InterCheck
                   1%          sysmond
                   0%          ocspd
    Top Processes by Memory:
              152 MB          Finder
              115 MB          HelpViewer
              111 MB          mds_stores
              86 MB          InterCheck
              57 MB          WindowServer
    Virtual Memory Information:
              983 MB          Free RAM
              1.03 GB          Active RAM
              584 MB          Inactive RAM
              1.01 GB          Wired RAM
              17.41 GB          Page-ins
              222 MB          Page-outs

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • There is only one app at "USE CELLULAR DARA FOR:" field

    How can I make other apps to appear at "USE CELLULAR DATA FOR:" field?
    There is only one app "Passbook" is on that list and I cannot use Cellular data for other apps at all.

    Hi sberman,
    Thank you for your answer.
    Restrictions is currently off.
    Anyway I found that my SIM card is not working on 3G.
    I replaced my SIM to other one and it works fine even without apps on the "USE CELLULAR DATA FOR:" field.
    Still don't know how to add apps on this field.

  • Developer Application Provisioning Issues -- Only one app at a time?

    _The upshot:_
    You can have one and only one developer provision and developer application on the iPhone at a time otherwise you get installation errors (i.e. 0xe8000001).
    _To fix:_
    Use Xcode Organizer to ensure that you have one and only one application and provision installed to the iPhone that uses your developer certificate.
    _To any Apple people:_
    If I am wrong about any of this, please let me know. I have wasted 3-4 days over the past 2 weeks due to these issues, and any explanation would be well received! Having one and only one application and provision installed to the iPhone fixed the 0xe8000001 issues for me.
    _Long winded explanation:_
    It turns out that I am working on multiple iPhone applications at the same time.
    Each application has a different AppID (as registered on the iPhone Developer Portal).
    I have spent quite a bit of time having major issues with Developer Provisioning and application installation from within Xcode and Xcode Organizer, which led me to not be able to debug my application on a live iPhone.
    I finally discovered my problem: I can only have one app and one provision on the iPhone that uses the same developer certificate.
    When swapping between Xcode projects if I remove all provisions and applications using Organizer and re-add only the provision of the application I am working on, then the install errors at build time go away.
    Samples of install errors that manifest themselves using the 0xe8000001 code:
    Thu Aug 21 16:56:02 unknown mobileinstallationproxy[770] <Error>: entitlement 'application-identifier' has value not permitted by provisioning profile
    Thu Aug 21 16:56:02 unknown mobileinstallationproxy[770] <Error>: verify_executable: Could not validate signature: e8008016
    -- Taken from the Xcode Organizer Console window for my development iPhone --
    These errors seem to be occurring because of an install time check against the installed provision files to verify the app, and it seems the provision from an already installed application is being used.
    This is probably occurring because the main developer certificate has to be the same between the 2 applications. As the scan through the provisions is occurring, the certificate of the new app matches the certificate from the already installed app, and the provision check fails due to different App IDs.
    There is one and only one developer certificate allowed per iPhone Standard program.
    I hope that this helps some other people out there with their development provisioning and debug / installation errors.
    --Batgar

    This is why you should create a wildcard developer certificate (com.youcompany.*)...follow the directions in the program portal. Then you can then install all your apps on your phone.

  • "Update all apps" button - only one app is downloaded!

    Every time if I click on "Update all apps" to update more than one app, iTunes is downloading one app only. I have to click a second time on the button to download the rest.

    I have just updated iTunes my credit was there before update and now I can't download updates for Apps I have alreaady purchased, receive an error message to the effect 'due to a temporary problem with accounts......use an alternative payment' I don't need to pay for the update and am afraid to Redeem another gift voucher in case it goes missing too I was in MAS this morning and my credit was definitetly there but since the update it has vanished from MAS and iTunes
    Edit: I can update my apps via my iPhone without the issues iTunes has atm
    Message was edited by: minib

  • How do you lock the ipad so only one app can be used

    I want to force a student to communicate using an ipad communication app.  I want the only thing on the screen to be that one app.  How do I lock the app so it is the only one that can be used on the ipad?   Is there a way to lock a page?  ie when he has navigated to the correct page to prevent the child from exiting and make him make a choice from that page?
    Thanks!

    You can lock an iPad to a given app via Guided Access:
    http://support.apple.com/kb/HT5509
    To try and lock a web browser to a single page you'll need to investigate third-party browsers such as MobiCIP or the McGruff browser and see if they allow you to lock to a single page. Safari in iOS 6 or earlier has no controls and in iOS 7 allows you to restrict to a given site or set of sites but not to a single web page.
    Regards.

  • Selective dataroaming for only one app

    Is it possible to only allow dataroaming for one app? While the rest of your apps on the iPad can't use dataroaming?

    No, sorry, that is not possible.
    Regards.

  • Crash Affecting only One Login - But Not in Safe Mode

    I have an iMac (built-in iSight) that suddenly has problems with only ONE login (the other accounts on the machine work fine). The troubled login won't mount the desktop at all, even with the entire library folder removed. Ran DW utility, but that didn't help. The interesting thing is, if I boot in SAFE mode, the problem goes away.
    What am I missing? If there's a problem with some bit of startup code, driver, etc., why is it only affecting one login?
    I realize my info above is sketchy. Hoping it might be enough for somebody to offer a clue... thanks.

    Hi, Lonestar.
    An errant Startup or Login Item maybe the cause. In this case, it would likely be a Login Item defined in the affected account. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem. Focus on the instructions concerning Login Items with the affected account.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Only one app wont authorize on the computer

    i have windows 7- 64 bit
    i tried to do a backup to my iphone but it didnt worked and i think that it is because i have one app that wont authorize
    i have already authorized my computer but i tried again
    so i deauthorized my computed and authorized it again but nothing worked.. please help me i have searched all over the internet for 4 hours now and nothing seems to work for me

    John
    I also had a few "Evil Spirits" the first couple of times using Multiple Displays.
    If you are using Multiple Displays, the trick here is that there are two preference panels one for the iMac and one the NTSC/PAL for the other display. If you want all the windows in the larger 20" display go to the NTSC/PAL Preference panel and click "Gather Windows" now you should have all on that Display. Also be sure to go to the iMac Preference panel and "Gather Windows" back to iMac befor turning off or disconnecting the other display.
    Let me know if that helped?
    P.S. For more help you can also click the purple ? bubble at the bottom/right side of the display preference panels.
    Dennis

  • Only one app will no longer download

    I have one app, MacFamilyTree 7, which I can no longer update; I can download and update/install other apps just fine.
    I tried to install the update from the Updates page in the App Store app, but it failed with the red error message, "An error has occurred". Then a drop-down box appeared with the message, "MacFamilyTree 7 failed to download. Use the Purchases page to try again." I went to the Purchases page and tried again; it failed with the same error message (didn't seem to know that I was on the Purchases page):
    The developer says that they can't help because it's an App Store problem. The Apple email-support agent suggested that I delete the app and install it fresh from the Purchases page, but the result appears in the screen shot. As a result, she told me to call Apple Technical Support. I escalated to a senior supervisor, who said that it's not an App Store problem because I can download/update other apps. It appears that I'm up Apple Creek without a paddle.
    Any ideas? Is there a hidden app-tracking file that I can edit or delete? A cache that I can delete?
    Thanks,
    Michael
    Macbook Pro, Mac OS X (10.8.4), 8 GB RAM, 530 GB drive space available
    Message was edited by: Michael Eisenman. Reinserted screen shot.

    Thanks, Dahveed. I logged in as my other Administrator account and was able to install the app. I switched back to my regular account and could open the app.
    So my regular account is wonky. Is there something I can do in that account to clear this up? It still shows "An error has occurred" next to the app on the Purchases page.

  • App lags/crashes in only one user account

    No test repos enabled,  Gnome desktop.
    Nautilus file browser is slow and will crash while opening some folders.
    Same issues with GTK pacman.  (only used for looking at packages. all package manipulation with pacman cl)
    This problem started over a month ago and only recently I'm trying to troubleshoot it.
    If I log in as test user or root, everything runs as it should.
    Would switching between the following  64bit packages to lib32 and  back to 64bit  possible create application problems in one user account?
    gnutls gcc-libs glib glibc glibgtk gtk gtk2 etc
    I have tried reinstalling packages including nautilus and even gnome desktop and gnome extras, removed any ~/ .nautilus files I could find etc.
    Any suggestions would be more than welcome other that creating a new user account.....that would be easy but I wouldn't learn a thing...
    I have searched and found many similar nautilus issues dating back several years, but the fix was usually package updates or reinstall nautilus.
    I have filed a bug at bugzilla gnome, but still trying to find a solution in the meantime.
    gdb nautilus <PID>
    (gdb) thread apply all bt
    Thread 2 (Thread 0x7f9965771700 (LWP 1994)):
    #0 0x00007f996ee6c3e3 in poll () from /lib/libc.so.6
    #1 0x00007f99701a7134 in g_main_context_poll (context=0x14c8a10, block=1,
    dispatch=1, self=<value optimized out>) at gmain.c:3093
    #2 g_main_context_iterate (context=0x14c8a10, block=1, dispatch=1,
    self=<value optimized out>) at gmain.c:2775
    #3 0x00007f99701a7a42 in g_main_loop_run (loop=0x14c8af0) at gmain.c:2988
    #4 0x00007f997149e144 in gdbus_shared_thread_func (data=<value optimized out>)
    at gdbusprivate.c:277
    #5 0x00007f99701cdf56 in g_thread_create_proxy (data=0x14c8b10)
    at gthread.c:1897
    #6 0x00007f996f108c60 in start_thread () from /lib/libpthread.so.0
    #7 0x00007f996ee747ed in clone () from /lib/libc.so.6
    #8 0x0000000000000000 in ?? ()
    Thread 1 (Thread 0x7f997325b760 (LWP 1954)):
    #0 g_atomic_pointer_get (atomic=0x14752b8) at gatomic-gcc.c:78
    #1 0x00007f9970ac1e23 in lookup_iface_entry_I (
    instance_class=<value optimized out>, iface_type=<value optimized out>)
    at gtype.c:561
    #2 type_lookup_iface_vtable_I (instance_class=<value optimized out>,
    iface_type=<value optimized out>) at gtype.c:616
    ---Type <return> to continue, or q <return> to quit---
    #3 g_type_interface_peek (instance_class=<value optimized out>,
    iface_type=<value optimized out>) at gtype.c:3099
    #4 0x00007f9971deecb0 in IA__gtk_tree_model_iter_has_child (
    tree_model=0x188a930, iter=0x7fff08de6360) at gtktreemodel.c:1251
    #5 0x00007f99696d02ff in count_rows (model=0x188a930,
    iter=<value optimized out>, end_path=0x1ae4390, count=0x7fff08de643c,
    level=2, depth=3) at gailtreeview.c:4436
    #6 0x00007f99696d031c in count_rows (model=0x188a930,
    iter=<value optimized out>, end_path=0x1ae4390, count=0x7fff08de643c,
    level=1, depth=3) at gailtreeview.c:4437
    #7 0x00007f99696d0558 in get_index (tree_view=0x1640760,
    path=<value optimized out>, actual_column=0) at gailtreeview.c:4374
    #8 0x00007f99696d3e4a in cell_info_get_index (tree_view=0x1640760,
    index=0x7fff08de6538, info=<value optimized out>) at gailtreeview.c:4142
    #9 0x00007f99696d4430 in find_cell (obj=0x184e200, i=103)
    at gailtreeview.c:4193
    #10 gail_tree_view_ref_child (obj=0x184e200, i=103) at gailtreeview.c:835
    #11 0x00007f996949d030 in ?? () from /usr/lib/gtk-2.0/modules/libatk-bridge.so
    #12 0x00007f9970ab1151 in signal_emit_unlocked_R (node=<value optimized out>,
    detail=434, instance=0x184e200, emission_return=0x0,
    instance_and_params=0x7f994c1aa770) at gsignal.c:3218
    #13 0x00007f9970abac85 in g_signal_emit_valist (
    instance=<value optimized out>, signal_id=<value optimized out>,
    ---Type <return> to continue, or q <return> to quit---
    detail=<value optimized out>, var_args=<value optimized out>)
    at gsignal.c:2983
    #14 0x00007f9970abb012 in g_signal_emit_by_name (
    instance=<value optimized out>,
    detailed_signal=0x7f99696dc055 "children_changed::add") at gsignal.c:3077
    #15 0x00007f99696d332d in model_row_inserted (
    tree_model=<value optimized out>, path=<value optimized out>,
    iter=<value optimized out>, user_data=<value optimized out>)
    at gailtreeview.c:2903
    #16 0x00007f9970a9febe in g_closure_invoke (closure=0x7f994c08a660,
    return_value=0x0, n_param_values=3, param_values=0x7f994c1aa6d0,
    invocation_hint=0x7fff08de6c10) at gclosure.c:766
    #17 0x00007f9970ab1a12 in signal_emit_unlocked_R (node=<value optimized out>,
    detail=0, instance=0x188a930, emission_return=0x0,
    instance_and_params=0x7f994c1aa6d0) at gsignal.c:3322
    #18 0x00007f9970abac85 in g_signal_emit_valist (
    instance=<value optimized out>, signal_id=<value optimized out>,
    detail=<value optimized out>, var_args=<value optimized out>)
    at gsignal.c:2983
    #19 0x00007f9970abae53 in g_signal_emit (instance=<value optimized out>,
    signal_id=<value optimized out>, detail=<value optimized out>)
    at gsignal.c:3040
    #20 0x00007f9971df92a1 in gtk_tree_model_sort_row_inserted (
    ---Type <return> to continue, or q <return> to quit---
    s_model=<value optimized out>, s_path=0x7f994c17c580,
    s_iter=<value optimized out>, data=0x188a930) at gtktreemodelsort.c:691
    #21 0x00007f9970a9febe in g_closure_invoke (closure=0x7f994c03fd50,
    return_value=0x0, n_param_values=3, param_values=0x7f994c1aa680,
    invocation_hint=0x7fff08de7110) at gclosure.c:766
    #22 0x00007f9970ab1837 in signal_emit_unlocked_R (node=<value optimized out>,
    detail=0, instance=0x17b96e0, emission_return=0x0,
    instance_and_params=0x7f994c1aa680) at gsignal.c:3252
    #23 0x00007f9970abac85 in g_signal_emit_valist (
    instance=<value optimized out>, signal_id=<value optimized out>,
    detail=<value optimized out>, var_args=<value optimized out>)
    at gsignal.c:2983
    #24 0x00007f9970abae53 in g_signal_emit (instance=<value optimized out>,
    signal_id=<value optimized out>, detail=<value optimized out>)
    at gsignal.c:3040
    #25 0x00000000004a1338 in report_row_inserted (model=0x17b96e0,
    iter=0x7fff08de7430) at fm-tree-model.c:622
    #26 0x00000000004a147d in report_node_inserted (model=0x17b96e0,
    node=0x7f994c1b0140) at fm-tree-model.c:689
    #27 0x00000000004a2591 in insert_node (model=0x17b96e0, parent=0x1bac790,
    node=0x7f994c1b0140) at fm-tree-model.c:880
    #28 0x00000000004a294e in process_file_change (
    directory=<value optimized out>, changed_files=<value optimized out>,
    ---Type <return> to continue, or q <return> to quit---
    callback_data=0x7f994c03fd80) at fm-tree-model.c:1015
    #29 files_changed_callback (directory=<value optimized out>,
    changed_files=<value optimized out>, callback_data=0x7f994c03fd80)
    at fm-tree-model.c:1029
    #30 0x00000000004b742e in nautilus_directory_monitor_add_internal (
    directory=0x16281e0, file=0x0, client=<value optimized out>,
    monitor_hidden_files=0, monitor_backup_files=0, file_attributes=259,
    callback=0x4a28a0 <files_changed_callback>, callback_data=0x7f994c03fd80)
    at nautilus-directory-async.c:778
    #31 0x0000000000505b49 in vfs_file_monitor_add (directory=0x16281e0,
    client=0x17b96e0, monitor_hidden_files=0, monitor_backup_files=0,
    file_attributes=259, callback=0x4a28a0 <files_changed_callback>,
    callback_data=0x7f994c03fd80) at nautilus-vfs-directory.c:106
    #32 0x00000000004a212e in start_monitoring_directory (model=0x17b96e0,
    node=0x1bac790) at fm-tree-model.c:1133
    #33 update_monitoring (model=0x17b96e0, node=0x1bac790) at fm-tree-model.c:1476
    #34 0x00000000004a2053 in update_monitoring (model=0x17b96e0, node=0x1a59fc0)
    at fm-tree-model.c:1474
    #35 0x00000000004a2053 in update_monitoring (model=0x17b96e0,
    node=0x7f994c08aba0) at fm-tree-model.c:1474
    #36 0x00000000004a2a7b in update_monitoring_idle_callback (
    callback_data=<value optimized out>) at fm-tree-model.c:1489
    #37 0x00007f99701a6bf3 in g_main_dispatch (context=0x14373f0) at gmain.c:2149
    ---Type <return> to continue, or q <return> to quit---
    #38 g_main_context_dispatch (context=0x14373f0) at gmain.c:2702
    #39 0x00007f99701a73d0 in g_main_context_iterate (context=0x14373f0, block=1,
    dispatch=1, self=<value optimized out>) at gmain.c:2780
    #40 0x00007f99701a7a42 in g_main_loop_run (loop=0x162a0d0) at gmain.c:2988
    #41 0x00007f9971d0f8f7 in IA__gtk_main () at gtkmain.c:1237
    #42 0x0000000000441867 in main (argc=1, argv=0x7fff08de7b78)
    at nautilus-main.c:544
    (gdb)
    Last edited by jeff story (2011-01-17 00:04:01)

    Same issue described in another topic: https://discussions.apple.com/message/20368268#20368268
    Confirming this is still issue with 10.8.2 (MacBook Pro Retina 15"), network disk connected to AirPort Extreme.

  • PPro crashes for only one user

    We run Adobe CC 2013 on a Dell T7600, 32MB RAM, K5000 GPU. Lots of internal storage. Two identical systems have been running like a champ since 12/2013.
    Long story as to why we're on CC 2013. Suffice it to say it still runs great, except for one user.
    Ppro crashes every time they try to open an existing project. The rest of us can log on and open them without difficulty.
    No recent installs of anything. THe user in question is a reliable user who doesn't do dumb things. All other users have no difficulty.
    We have tried having them start PPro with the ALT+SHIFT key. We have deleted all Media Cache files for all users.
    Below are snips of the Windows crash data.  Any ideas?

    Hi,
    I would suggest two things:
    Rename the 'Adobe' folder in your Documents library to 'OldAdobe' and then try to open the project. If it fails, then
    Create a new project, without importing anything go to Window > Workspace > Uncheck 'Import Workspace from Projects' . Then go to Window > Workspace > Reset current workspace. Save the project. Then see if it works.
    Hope this helps.
    Rameez

  • Updated OS10.6.8, laptop has 2 user accounts and now Firefox crashes for only one of two users every time at start-up. Other user runs FF fine

    Everything was running with 2 user accounts. Did sw updates incl. OS 10.6.8. Now the master account runs properly, including FF 12.0 however the 2nd account now crashes every time FF is launched. WIll not launch in safe mode either. This report is being submitted from the other account that still runs FF properly. Also downloaded FF to reinstal but a warning that I was installing OLDER version - even though I just downloaded the 'current' version. All this seems quite unexplainable! What's up???

    PhotogYogi wrote:
    I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
    By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
    Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

  • LogicExpress 9.1.8 crashes in only one user account

    LogicExpress 9.1.8 crashes when loading in just one of three user accounts.  Already tried deleting the preferences file.  Works fine in the other two accounts.  I'm still using OSX 10.6.8.

    Thanks. Well vs 3.6.8 is the latest FF. There is no Flash Player at all for any 64bit system. You must use the 32bit browser when Uninstalling/Installing and viewing Flash Content.
    For that to happen so suddenly sounds like some update of a program, Windows update, an Anti-Virus update had taken place. Any new program Installed or Uninstalled? Anything you can think of prior to that happening? It just sounds like a major conflict.
    You may want to take a look at your Flash files, perhaps some Flash file didn't get Installed properly.
    Go to C:\Windows\SysWOW64\Macromed\Flash  Open Flash and post back the files listed there. The NPSWF file(s) need a right click and then click on Properties to obtain the version number(s)
    Also go to Tools, manage add ons with IE and find Shockwave Flash Object..ActiveX Control..Flash10h.ocx and make sure it is Enabled.
    Using FF find the SWF vs 10.1.53.64 plug-in and make sure it is Enabled.
    Perhaps when FP crashed it caused something to change in both of the add ons.
    I had that happen to me a few months ago; Uninstalled an Anti-Virus/Installed a new version. Then couldn't see images on a website, and went to an Adobe website to check something and it told me I needed Flash Player to view it!!! Imagine my surprise:-) So that was the problem.
    Thanks,
    eidnolb

  • Firefox crashes for only one user on startup, even after reset; safe mode OK.

    Current crashes do not even produce crash reports, but two crashes from earlier today did yield:
    bp-7013aded-0644-47d8-9967-b48a12141013
    bp-cb495f8f-7ae2-4b48-86ff-63b6f2141013
    Starting in safe mode shows the same installed plugins and two extensions that are enabled in profiles for other users on this system. It is only this user's Firefox that crashes on startup, even after a reset.
    Have also uninstalled and re-installed Firefox. Again, it crashes on startup only for this user.
    Windows event viewer does have several entries for an Application Error:
    Faulting application name: plugin-container.exe, version: 32.0.3.5379, time stamp: 0x54224e6b
    Faulting module name: mozalloc.dll, version: 32.0.3.5379, time stamp: 0x54221b67
    Exception code: 0x80000003
    but it's not clear that these entries sync up with the crashes.
    This crashing on startup began this morning; no new software or any other system modifications (that I'm aware of) for several weeks now.

    The hardware acceleration setting appears to be the culprit. After unchecking the Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available" setting, Firefox no longer crashes on startup.
    Initially I'd glossed over this setting since it isn't an issue for any of the other users on this system. I'm still puzzled as to why this would be an issue only for this user, and what had changed as of this morning that set it off, but obviously there's something about their configuration which triggers this situation, even for the default plain vanilla Firefox profile!
    Thanks, cor-el!

Maybe you are looking for