Experiencing stop and go of utube videos not streaming

I view utube videos on my ipad and the videos are downloading and video view is intermittent

Chances are it's your internet connection. Wifi only transfers data so fast.  See if you can pause the video and let it 'catch up' so to speak and then try to watch.

Similar Messages

  • HT201210 while up-grading the IOS 6 to my iphone, the up-grade stop and now my screen does not stop to sart (apple) than shut down than restart (apple scree,) than shut down again

    while up-grading the IOS 6 to my iphone, the up-grade stop and now my screen does not stop to sart (apple) than shut down than restart (apple scree,) than shut down again

    If restoring the phone as new did not solve your problem, you'll need to bring the phone to Apple for evaluation.

  • I have a MacBook Air running OSX 10.74. I've tried 3 time to upgrade the to the latest OSX. The upgrades downloaded, but when they start to install the operation stops and says the upgrades did not install because an error occurred.

    I've tried 3 times to upgrade my operating system. Each time the upgrade is downloaded, but when it starts to install the upgrades, it stops and says the upgrades were not installed because an error occurred. No mention of what the error was.
    My computer is a MacBoor Air running OSX 10.74.

    Hi ..
    If you are trying to upgrade to Mavericks, make sure your Mac meets the requirements >  OS X Mavericks: System Requirements
    And make sure there's enough free storage space. Mavericks requires about 8GB's.
    Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage
    Make sure there's at least 15% free disk space.
    If it's not a storage space issue ...
    Apps such as Little Snitch, Growl, MacKeeper, and anti virus software can prevent apps from downloading including OS X upgrades
    Disable anti virus software if installed
    Check the firewall in System Preferences > Security & Privacy > Firewall > Firewall Options
    Make sure Gatekeeper is enabled
    Open System Preferences > Security & Privacy then select the General tab.
    Make sure either Mac App Store or Mac App Store and identified developers is selected.
    If that area is grayed out, click the padlock icon to proceed.
    OS X: About Gatekeeper

  • HT4623 i was updating my i phone 3gs but suddenly it stopped and appear your iphone could not be activate

    i Was Updating iphone 3gs software but suddnly it stopped and appear your Iphone  could not be Activate

    Your ebay purchased phone was hacked/jailbroken. You cannot get help here for jailbroken phones. Sorry.

  • IE7 and Multiple Embedded SWF Videos Not Working

    We have a page that contains 2 videos that are streamed from our media hosting company.  The code is fairly straightforward,
    <object type="application/x-shockwave-flash" data="http://xxx.xxx.xxx/your.swf" width="400" height="300">
    <param name="movie" value=http://xxx.xxx.xxx/your.swf"" />
    <param name="allowFullScreen" value="true" />
    <param name="wmode" value="transparent" />
    <param name="allowScriptAccess" value="always" />
    <param name="flashvars" value="streamer=rtmp://zzz.zzz.zzz/zzz.flv&autoplay=false" />
    </object>
    Similar code is used for the second video. The embed code is actually generated from the hosting company and has worked every time. Firefox and Chrome display both videos with no problem. However, IE7 only displays the second video. The first video just has white space where the video should be.
    I have used 'embed' tag and conditional object tags (for IE), rewritten the code from scratch, changed the z-index, used Flash to generate code, cleared the cache - all to no avail. Is IE7 incapable of having multiple SWF files on the same page?
    **I did notice that changing the autoplay attribute to true will allow for the video to display, however, the playback controls are not available.
    Any ideas on how to get this working in IE7?
    Thanks in advance

    Another me too. In particular the symptoms are this:
    + any YouTube video embedded within a webpage loads the poster frame and the controls, but after clicking the play button only shows the progress indicator briefly before showing "An error occurred, please try again later." within the video frame.
    + the same YouTube videos play fine on the YouTube site.
    + other Internet video plays fine, embedded or not.
    + when the error occurs Safari reports "One error in opening the page. For more information, choose Window > Activity".
    + the Activity window shows "forbidden" for http://v13.lscache4.c.youtube.com/videoplayback?ip=0.0.0.0&sparams=id%2Cexpire%2 Cip%2Cipbits%2Citag%2Calgorithm%2Cburst%2Cfactor%2Coc%3AU0dWSVhMVV9FSkNNNl9QRllH &fexp=900028&algorithm=throttle-factor&itag=34&ipbits=0&burst=40&sver=3&expire=1 274817600&key=yt1&signature=C15947474FA80C9A1B9DA597103C5FF7D621A478.0C1490DE456 5D519F602B0043A4E1F9D800417A0&factor=1.25&id=c3e8886e8b459334
    + the same URL downloads fine when visiting YouTube directly, except the signature value is different.
    I have tested the following:
    + the same computer worked fine a week or so ago
    + other computers on the same shared ADSL connection work fine
    + Firefox works fine (contrary to other's experiences)
    + deleting com.apple.Safari.plist doesn't help
    + disabling/enabling the "Enable Plug-ins" preference doesn't help
    + deleting Preferences/Macromedia folder doesn't help
    + reinstalling Flash doesn't help
    + empty cache doesn't help
    Tis quite perplexing.

  • We need to get some help and explanations about iChat video not working.

    I've read so many postings about iChat Video hoping for an answer to my problem, but not only did I not find an answer, no one else has been receiving an answer either.
    I've had multiple problems with my ichat video not working.
    I either get an error saying someone didn't accept which isn't the case, or I get some error-8 or something ridiculous like that.
    Can we get some help from apple support or something?!

    Short answer: No, we can´t...!
    Apple don´t care about us users, unless you pay for an Apple Care Service. Try your best to follow some advices from around this forum. That´s the only help you will get.
    Some people have got their iChat video working again after following some advice. By the way. I´m not one of them... I´ve tried every single tip I read here, but I´m still stuck with text chat only...
    Good luck.

  • Upgrade FMS2 - Streaming Server 3.5 - Video not streaming - NetConnection.Connect.Rejected

    I have Flash Media Server 2 set up with a simple bandwidth detection application (with serverside code), and a videoplayer application (no serverside code).    I have upgraded to Flash Media Streaming Server 3.5 and have managed to successfully get video to stream using the basic examples on the startup screen both locally and from another machine.  However, when I try and connect to either the bandwidth detection application, or the videoplayer I get the error message:
    NetConnection.Connect.Rejected
    [ Server.Reject ] : (_defaultRoot_, _defaultVHost_) : Application (**my appname**/) is not a valid signed application; loading access denied.
    I saw another post in this forum saying that for custom applications you need Flash Media Interactive Server instead of Streaming Server.  This worries me as I'm quite far down this route now and don't want to tell my boss that actually we need to find another £2k to make this a viable solution!  But looking at the credentials of Flash Media Streaming server (http://www.adobe.com/products/flashmediaserver/compare/), it seems to be that what I want to do is viable.  At worst I would have thought that only the bandwidth application would be a problem as it has serverside code.  But even so, the Streaming Server apparently does have bandwidth detection.  How does this work then?
    By having the Steaming Server am I somehow tied into Adobe video players if I want to use the streaming capabliities?  Am I not able to have my own named application?    Or is it simply likely that there is some setting somewhere I have missed which is causing the error.
    Any advice would be much appreciated as I'm struggling to get to the root of these answers on my own.

    You just need to define handlers specially onBWDone on client side to do Bandwidth detection. Just check example "Bandwidth" in documentation/samples/Bandwidth/Bandwidth.as.
    Since you are using VOD, i think you can just pass "true" as second parameter when you make nc.connect call in you client side and VOD application would make call to checkBandwidth and would call onBWDone when it finishes bandwidth detection. Read more about this in Client API documentation in SSLR.pdf and Dev_Guide.pdf.
    Also Adobe has come with advanced Bandwidth detection which you can do using client-side Flash Player API's - Please check this link for more info:http://www.adobe.com/devnet/flashmediaserver/articles/dynstream_on_demand.html
    Also you can NetStreamInfo documentation which should be present in AS3LR (check documentation folder of FMS)

  • TS1702 I have a iPhone which I purchased first. I put my email address as my apple ID. I have just purchased an iPad and add my other email address as the apple ID by mistake and now the photos will not stream between each device. I have tried to change t

    I have an iPhone which I added my email address as my apple ID. I have just purchased an iPad which I add my other email address by mistake and now I am unable to stream my photographs. I have tried to change my email on both devises but with out luck as it won't reconise my pass word. Any ideas

    Settings>iTunes & App Stores>Tap the ID and sign out. Then sign in with your other ID.
    If this isn't working, restart the iPad - AFTER you sign out of the ID and then sign in with the correct ID after the iPad restarts.
    There is no reason why you should not be able to sign in with the ID that you are using on the iPhone and use that passord with that ID on the iPad.

  • All streaming video with my Firefox browser is choppy and constantly stutters and stops and starts. This does not happen with Internet Explorer. Help!!

    Any streaming video that I view on Firefox stutters, is choppy and very irritating to try and watch. I opened up Internet Explorer and found that I don't have those issues. This occurs on YouTube, Facebook, and all other videos that I attempt to watch.

    I've tried both things, but video still stutters.. Have also tried removing profile, and complete reinstall of firefox.
    I'm on 24 Mbit cable and the only user atm. IE and Chrome seems to work without stuttering.
    I've having this stuttering every ~5th second, like a small "1/4 sec buffering".

  • System upgrade on MacBook Pro stopped and my MacBook Pro will not restart.

    MacBook Pro will not restart.

    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    If you are unable to get it working using the above, then you will need to try this:
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    And, if this doesn't help, then the HDD is failing or has failed.

  • NetStream.Play.Stop and Complete fired early on RTMPE streams

    Hi there
    I am experiencing an issue with playback on RTMPE streams. after investigation it seems that the FMS server is firing the NetStream.Play.Complete message at random points, indicating that a stream has ended. This is happening and random points during the stream,  not even close to the end.
    The order of Status messages is as follows:
    Thu Oct 20 2011 04:15:17 PM :: NetStream.Play.Start : status
    Thu Oct 20 2011 04:32:40 PM :: NetStream.Play.Stop : status
    Thu Oct 20 2011 04:32:40 PM :: NetStream.Buffer.Flush : status
    Thu Oct 20 2011 04:32:58 PM :: NetStream.Buffer.Empty : status
    Thu Oct 20 2011 04:32:58 PM :: onPlayStatus : NetStream.Play.Complete
    As you can see roughly 17mins into playback...although the stream is 1 hour 24mins long
    I have tested this numerous times, and each time it is at a different point in the stream.
    Intermittently the NetStream.Play.InsufficientBW warning is being fired prior to NetStream.Play.Stop.
    I am using a player built on OSMF 1.5.
    Just need to know why these messages would be fired and how to handle them
    Thanks
    Steve

    Hi Steve,
    Thanks for the information. Did you check with flvcheck tool to see if the file is a valid FMS file ? If not, can you do that please ?

  • Adobe Flash Player video not streaming correctly (since 10/14/11)

    Hello!
    I'm a full-time, daily user of Flash Player as I got rid of my TV and started depending on websites to watch live TV streaming, full episodes or videos.  I've never had any issues with FP working properly until about midnight, FP video streaming is pausing/buffering every 2-3 seconds.  I have already spent hours making sure my notebook (which is 3 weeks old) did not have any software updates, pc performance issues, and also ran full scans for any possible viruses through McAfee and Windows Defender which completed sucessfully.  Additional maintenance including uninstalling and reinstalling Adobe FP 11, made sure all browser ad-ons were disabled, disabled automatic software to run at start-up, checked for any "failed" updates in history and fixed (1) failed update in Windows, deleted browsing history and cookies, uninstalled any unimportant software such as Bing, checked memory usage, troubleshoot issues in control panel and disabled display hardware acceleration in adoble FP settings per instructions read in online support.  I do pay for IT Service through my ISP which was my last attempt to fix this issue, however, I was hoping to get any advise from you first because I did see that there is a note in your website that Adobe is performing maintenance updates at this time, and I'm hoping this might be the reason afterall.  I appriciate your rapid responsse to any advise or help before I continue to diagnose any performance isses further with my IT.  Thank you so much!!!!

    Windows Defender is not an anti-virus program in the traditional sense, it simply sweeps the hard drive for a limited number of known malware and will not interfere with any other installed anti-virus software such as McAfee.
    I seriously doubt that the anti-virus software has anything to do with these Flash Player problems at all, but regardless my advice would be to uninstall McAfee and download Microsoft Security Essentials direct from the Microsoft website - this is a full, free, anti-virus suite which also makes Windows Defender obsolete (it will probably remove Windows Defender for you automatically).
    There seems to have been a lot of problems for a lot of people with Flash Player 11, if removing McAfee didn't solve your problem then I would advise uninstalling Flash Player 11 (there is a Flash Player uninstaller available on the Adobe website - http://kb2.adobe.com/cps/141/tn_14157.html) and going back to a previous Flash Player version to see if that cures your problem.  I am in the process of doing the same thing myself as since updating to 11 my streaming video has been messed up, I can think of no other explanation than shoddy coding / testing in Flash Player 11.  The Flash Player 10.3 installer is available here - http://www.adobe.com/support/flashplayer/downloads.html#fp10.3 and here - http://kb2.adobe.com/cps/142/tn_14266.html

  • Rtmp not connecting, sample video not streaming

    I am developing an application in Flash that runs locally and it uses FMS 4.01, locally. I have been using adobe FMS 4.01 for months with no problem. Today I cannot connect to my server and I cannot even play the sample video on the Flash Media Server Start Screen. The sample video for the http plays after I changed the permissions for flash, but rtmp does not play. I have reinstalled the server; 3.5, 4.0 and 4.01, none of them will connect to rtmp. I receive this error on the flash media server start screen that says "the connection timed out". How do I fix this?please help!

    Can you just check if your firewall is turned on and blocking 1935? Also are you trying to play RTMP using Start Screen from same machine where FMS is installed or from any other machine?

  • My video not streaming via Skype

    Hi, I have an Intel iMac, my friend has a new MacBook. When we Skype, I see him, but he can't see me.
    My built in iSight camera does not come on automatically when I call, so I choose Skype>Preferences>Video. Then the green light next to the camera comes on and I see my image. He can't see me at this point (I think that is intended - video does not seem to stream out when the preferences window is open). But when I close the preferences window I believe that my camera should stay ON and my friend should then see my image. What actually happens is that the camera turns off when I close the preferences window - so he still cannot see me.
    Any ideas anyone?
    Intel iMac   Mac OS X (10.4.8)  
    Intel iMac   Mac OS X (10.4.8)  

    Found the answer myself - little blue video icon.

  • Have AMD & Realtek audio enabled, should I uninstall one? you tube & other video not streaming...

    HP 2000 notebook pc windows 8, no error message, I have 2 devices for audio Realtek & AMD, should I uninstall one?

    Hi,
    No, you shouldn't uninstall either of them.
    One is for the notebook speakers (realtek) and one (AMD) is for the HDMI out port which sends video and audio thru the HDMI cable to an HDTV or monitor.

Maybe you are looking for