Experiencing "timed out" error when uploading podcast

I am experiencing a "timed out" error when uploading a podcast to iTunes. Using PC. I've updated iTunes...

- You really need to ask the Basis team to extend the maximum run time for background processes (30 mins is too short).
- You can also try to reduce the run time by setting up BOM Buffering in configuration so if the same BOM is used again and again (in your case of delete and recreate planned order, yes), it will read from memory.
- You should set the planning horizon and use NETPL (net change in planning horizon) in daily run. So that the run will only find the relevant changes in order proposal up to certain days, thus reduce run time.
- You should discuss with your BASIS team about the list of background job in the batch windows. Specify time in such a way that the performance-critical job (i.e., MRP, reschedule sales order, certain customized report, etc.) doesn't run at the same time.
- You can increase the number of parallel processes to issue several jobs to run MRP at the same time.
Rgrds,

Similar Messages

I get a connection timed out error when trying to connect to the itunes store, if I have pending downloads they show up and I can download, also I was able to access my account, yet I can't access other parts of the store, I am in greece on a macbook pro

I am from the states and am in Greece on vacation. I have a good wifi connection yet keep getting a connection timed out error when I try to access the itunes store. It is funny because pending downloads show up in the cue, and they download no problem. I can also open my account. When I try to go the the movies or music section of the stor though it just times out. I tried updating to the latest itunes software and restarting, also I checked all the proxy boxes in the network section of the settings then unchecked them all and restarted and it keeps doing the same thing. Any help would be appreciated.
Thanks

Welcome to AD!
There's been plenty of posts about Norton & the removal tool here. Unfortunately many folks seem to not even know it comes pre-installed on most PCs! Even a trial version, never used or long since expired can cause problems - and not just with iTunes.
Anyone with a Dell, HP, Gateway EEE PC, Asus ..... what Windows PC manufacturer does NOT have this junk software pre-installed?
Almost all of them have made deals with Symantec to pre-install it.
Horrible, horrible software.
Anyway, glad you finally solved your problem.

Connection Timed Out error when I try to access Alert Inbox

Hi experts,
I have not been looking at my alert inbox for a while and I suspect it's very full.
When I tried to open the alert inbox from RWB, I encountered the following error:
<b>500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Mon May 07 11:08:51 2007
Module: icxxthr.c
Line: 2646
Server: ootspdbs02_PI1_01
Error Tag: {-}
Detail: Connection to partner timed out after 60s
</b>
All other functions of the RWB is working fine, including Alert Configurations.
I tried restarting the J2EE instance, but it did not help.
I've checked the SICF services, and they are fine.
I suspect the alert inbox is trying to load a huge amount of data, so it is timing out.
How can I adjust the keep_alive_timeout setting in this case?
When I look into RZ11, I am unable to edit this entry.
Please help.
Thanks.
Ron

Hi Ron,
Follow these steps:
1. Try restarting the JAVA Stack.
2. ST22 check out any Dump.
3. In RWB --> Component Monotring --> check the Cache connectivity test...is all are Green ( Glowing )
Check these SAP Notes 750287,900896,768456
If that doesnt work out, check this SAP Note 840849
Regards,
Prateek

TNS Timed out error when connecting from internet

All,
Apologies if I am missing something simple...
I have set up a test 9i database on a Win 2003 Server, and I can connect to it fine from within my LAN. I am trying to connect to the same database from the internet, but am getting a TNS:Operation timed out error.
I believe I have set everything up correctly:
-Port Forwarding port 1521 on my simple Linksys router/firewall
-TNSPing gives me a sub-second OK (from the internet)
-I can get a TNS:listener could not resolve SERVICE_NAME error if I purposely screw up the service name in the tnsnames.ora file (proving, I think, that I can connect to the Listener from the outside internet)
Am I missing something simple? Why can I ping the listener but not get a response when trying to connect to the database (database is working, I can connect from within my LAN)?
Do I need to download and install the latest release for Win Server 2003?
Thanks,
Chris

Thanks for your response, Michael..
Is this something new in 9i? The reason I ask is that I swear that while working on another project last year I was able to set up a development 8i database in my home office and was able to allow my client hit this database from their own location (in Peru, via the internet) using a vb.net app that I had built. The only thing I did on my home router was to forward port 1521.
If my memory is wrong or things have changed since then, then what other ports other than 1521 are used to connect? Security is not really an issue, as I am just trying to set up a test database in order to Q/A an application I'm building.
Thanks in Advance,
Chris

I keep getting network timed out errors when downloading iPad software

How do I download ios5 without getting network timed out errors?

Try temporarily turning off your firewall and antivirus software until the download has completed.

Timed out error when running a report

The error is:
"Request timed out because there has been no reply from the server in 600000 ms"
Does anybody have any idea how to solve the issue?
The following is more info on the report:
Report has 8 subreports and data set is around 7MB size
We generated another report with 83MB of data and this report doesn't have any subreports and its running completely.
using Crystal reports XI r2 SP3, Visual studio 9, BOXI server SP3 and using XML as data source.
Any help would be appreciated.
The following is the Stack Trace:
System.Exception was unhandled by user code
Message="Load report failed."
Source="CrystalDecisions.CrystalReports.Engine"
StackTrace:
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, EnterpriseSession enterpriseSession)
       at Covance.ED.Framework.Reporting.Workflow.CreateReportOutputActivity.executeCrystalReport_ExecuteCode(Object sender, EventArgs e) in C:\Source\TR\Components\Framework\Covance.ED.Framework.Reporting\Workflow\CreateReportOutputActivity.cs:line 189
       at System.Workflow.ComponentModel.Activity.RaiseEvent(DependencyProperty dependencyEvent, Object sender, EventArgs e)
       at System.Workflow.Activities.CodeActivity.Execute(ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext)
       at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
InnerException: System.Runtime.InteropServices.COMException
       Message="Failed to load info object."
       Source="Analysis Server"
       ErrorCode=-2147467259
       StackTrace:
            at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
            at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
            at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       InnerException:

There are a few timeouts that could come into play here. One is a Corba timeout.
You'll want to adjust your ConnectionTimeout in your regisry under HKEY_LOCAL_MACHINE\SOFTWARE\BUSINESS OBJECTS\Suite 11.5\CER. The default value is 600000. Try doubling it to 1200000.
You may also want to increase your httpExecution timeout as well in your web.config file.
http://msdn.microsoft.com/en-us/library/e1f13641.aspx

Getting "Read timed out" error when submitting new podcast

http://www.therpghaven.com/podcast/?feed=podcast
My feed is validated. I've checked it against the example feed and it seems fine. I can subscribe directly from within iTunes and it looks fine, downloads the first episode.
I saw that there was maintenance last night. Is it possible this isn't my fault?
If it is, any clues would be a great help!
Thanks

I'm using WordPress with the Podcasting plug-in, which I have admin access to. That's what generates the feed. But according to the developers, the feed is not actually a file, but something dynamically generated by WordPress when it is called. When you say "actual file" do you mean the podcast itself? Or the feed?
I'm not familiar with WordPress: possibly what they mean is that a process takes place on the server each time a request is received for the feed: if this is so then you can't change that. By 'actual file' I did mean the feed - most systems produce an .xml file and it is that which is submitted to iTunes.
As to log-in, normally the iTunes Store effectively keeps you logged in: I assume you would need to have cookies enabled - is this the case?

"Shared storage client timed out' error when starting a batch

I'm getting this error on every node in the cluster. What am I doing wrong?

I also administer a managed cluster with 6 machines, and have been using it successfully for almost a year now. But the only encoding that is submitted is directly through Compressor, never via FCP.
With QMaster, it sees a Quickcluster and a managed cluster the same way. While they are set up differently, the principle is the same, QMaster only sees services.
Exporting out of FCP to any cluster has always been slow. If you want to harness the power of distributed encoding, you could export a Quicktime reference file and take that into Compressor to be submitted to the cluster for encoding.

Execution timed out error when running opcagt command on linux server with agent 11.12.009 installed

Hi,
Can anyone help me in the below issue.
we have a Linux server with agent version 11.12.009 installed on it. when I try running opcragt command on it through are management server it gives the output that all agent components are running.
but when I check the agent status or version through opcagt command on it it gives below error:
ERROR: (depl-86) Unable to execute command 'opcagt' on node
(depl-176) Message returned from host
(xpl-117) Timeout occurred while waiting for data.
Below are the error lines that I got from system.txt file of the server:
0: ERR: Fri Dec 19 09:09:38 2014: ovconfd (3708/140429034952480): (conf-180) Could not create messenger for configuration server 'ovconfd' and register its methods with the messenger object.
1: ERR: Fri Dec 19 09:09:38 2014: ovconfd (3708/140429034952480): (xpl-89) write(11)[012C5430] failed.
2: ERR: Fri Dec 19 09:09:38 2014: ovconfd (3708/140429034952480): (RTL-28) No space left on device
Could anyone please let me know what can be the issue in this.
Thanks,
Akansha

ORA-00600: internal error code, arguments: [kzxcInitLoadLocal-7], [942],
[ORA-00942: table or view does not exist
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 252
ORA-06512: at line 36
ORA-01403: no data foundWhat does this query return?
SQL> SELECT HOST, ACL
FROM DBA_NETWORK_ACLS;Please see (Redefining a Network Access Control List Fails with ORA-1403 [ID 854083.1]).
Thanks,
Hussein

Read timed out error while opening monitor tab in DataServices

Hello all,
Am getting a "Read timed out" error when I try to open the monitor tab in DataServices admin console for a few jobs only. For several jobs, monitor tab opens just fine. But for a few it doesnt and throws the error mentioned above. Mostly this behaviour is noticed with a job having several workflows and dataflows.
The version of DS used is 12.1.0.0. Tried to gather some info on this issue, but couldnt find any relevant thread. Would really appreciate if anyone could help me with it.
Regards,
Prem

check the following post
http://www.forumtopics.com/busobj/viewtopic.php?t=148213

ARP/RARP Timed out error during Jumpstart installation

Hello
Good day to you.
One of my JS client machine throwing "ARP/RARP" Timed out error when I try to rebuild the box thro' Jumpstart installation.
The box was earlier installed thro' Jumpstart method and was crashed recently so trying to rebuild it again.
To make a note, my Jumpstart server (Boot, Install & Config - on same machine) and this client box are in different subnet.
Looks the client machine broadcast not reaching the Jumpstart server or something to do with network config.
After issuing "boot net - install" on ok prompt from the client machine, I am getting the above mentioned error - ARP/RARP Time out.
Any thoughts?
Thanks.

The first step in traditional jumpstart is for the SPARC client to gather an IP address from the network via RARP.
The messages indicate that it is not getting a response to this query.
Some possible reasons:
network not working properly
No jumpstart/boot server on local subnet
Jumpstart/boot server not configured for this client
Darren

Anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

Hi, couple of things to try...
Anonymous
Post subject: NSURLErrorDomain error -1100 in OS X 10.8
If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
http://x704.net/bbs/viewtopic.php?f=12&t=6130
I was recently trying to upgrade to mountain lion through the app store. I have unreliable Internet from a cable company whom I will not name, but we all know who they are. My Internet dropped while downloading the upgrade. Once I went through the notorious unplug the modem/router and plugged it back in to gain Internet connectivity again, I could not resume. No matter what I did, the app store kept displaying "an error occurred." I am hoping that those with the same issue read this first to save them hours of skimming through the Internet to find a solution. Here are the steps to take:
1. Make sure you have reestablished Internet connection
2. Chances are you got frustrated when you tried to resume/unpause the download and clicked the "X" to the left. If so, select the "Store" drop-down menu from the App Store and select "View My Account." There should be an option to unhide your purchase. You know what to do.
3. There is also an option to reset all warnings for buying and downloading under "View My Account." Do this, click "Done," sign out of the App Store and quit the App Store.
4. Open the Preferences in safari and select Privacy. Select "Remove All Website Data." Just do it.
5. Launch the app store and sign in.
6. Now, if you "Check for Unfinished Downloads" everything works peachy.
I hope this helps. Not much I can do for your Internet connection though.
JonEz15...
https://discussions.apple.com/thread/4697970?tstart=120

I started getting a Timed Out error message on my iPhone 5 when browsing the web that reads Page could not be loaded. Connection timed out. I performed a Reset Network Settings and still get the error. What is the fix?

I started getting a Timed Out error message on my iPhone 5 when trying to browse the internet tthat reads Page could not be loaded. Connection timed out. I performed a Reset Network Settings and am still getting the error message. What is the fix?

Thanks so much for more direction.
I realized that I bought this iPod T4 about a year ago, so decided to check the date and it is still under the 1 year ltd. warranty until 21 Dec. I contacted Apple via Chat and was informed that the problem may lie in the version of iTunes I was running 10.7. Today Apple released v. 11 of iTunes which I was instructed to download. It's TOTALLY different from iTunes 10.7 - drastically different in fact.
The Apple Chat Rep set up a phone call appointment forl 8:00 pm ET tonight where another Rep will call me to make sure the restore was accomplished OK. With v. 11 of iTunes I can't even find the restore option!!! The phone Rep will have to help me navigate v. 11 of iTunes. It doesn't seem intuitive at all. Maybe it's just me?!?!
Thank you for sending this new link for firmware. It's not clear to me right now whether I'll need it or not. The phone Rep will probably somehow be able to resolve the problem. If not, they'll probably send me to the nearest Apple store if the problem is hardware, as it would be covered under the warranty. I will give another update as to what transpires as a result of the phone call with the Apple Rep.
Again, thank you so much for helping me.

I deal with a itunes update problem when i try to update i get coneection has timed out error! i had the same problem when i had vista.. yesterday i formated my pc but i still have the same prommblem. i dont deal with such problems on direct downloads.

i deal with a itunes update problem when i try to update i get coneection has timed out error! i had the same problem when i had vista.. yesterday i formated my pc but i still have the same prommblem. i dont deal with such problems on direct downloads.i have this problem only with tunes. maybe my conection freezes for a sec idk

Sorry I gave this a 'this helped me' but after a long struggle I found some ticked box somewhere from some unauthorised chrome extension blaaa....... the link you gave was great, not only did it confirm all the bad things google is supposed to be up to it provided a better browser. Cheers man.
Anyone who find this; I disabled all extension in chrome. I then searched the word proxy in the settings section. A button came up, "change proxy settings" I clicked on it. Earlier it was greyed out as an extension was interefering.. It brought up a box with my own settings from my computer. Then I clicked LAN settings, then unchecked the 'Use a proxy server' button.
P.S. If you're using chrome, bail, and dowload Komodo Dragon. It's virtually identical, but you're not tracked, and you can use chrome extensions, and you can quickily transfer your chrome preferences into it.

Keep getting "network timed out" message when trying to download tv shows -

Howdy all!
For two days I've been trying to fix a problem: when I go to the Itunes store and buy tv shows (CSI, Battlestar Gallatica) I can buy them, start the download, but after a minute all of the downloads stall and I get the error message "network timed out" "error 3259"). However, I can download podcasts at lightning speed, and my connection is very high. the error message said there was a problem with the itunes store.
I deleted itunes several times, reinstalled, went through and deleted all the old files, reinstalled, and tried several times. Each time I get the same message
The itunes store says: "Hey, you bought this, but unsuccessfully downloaded it before. want to try again?"
and each time it fails.

I tried to see if the problem was with the itunes store - I bought a song and it downloaded in seconds. I then went to the tv shows section and tried to download a "free" tv show - and got the same message. So in this case, the error only seems to be with downloading tv shows.
I'm at my wit's end - don't know what to do.

Experiencing "timed out" error when uploading podcast

Similar Messages

Maybe you are looking for