Experiencing trouble connecting via wifi within french internet providers??, Experiencing trouble connecting via wifi within french internet providers??
The internet just not work fine with the websites after a while. If I connect the ethernet cable, everything works perfect. I tried Safari, Firefox and Chrome. It happened with all of them.
Similar Messages
-
I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house and the mobile WiFi is our only option). How do I connect my Time Capsule to the Internet via the mobile WiFi?
LOL!!
I am in Australia and the ISP... I think both the main ones would fit your description to a T.. big T in particular.
Your router is really unsuitable.. if it is only wireless and no ethernet.. just buy an ethernet one.
Do a search on ebay.. 3g router.
But you can get the TC to join a wireless network.
It is a non-standard setup that Apple will not support.. the option is hidden.
If you are on Lion download the 5.6 utility. Go to the wireless set up page and hold down the option key whilst selecting wireless mode.. a new option, join will appear. You can then put in the ssid and passkey of the 3g router.
But please note the end result of this setup..
very slow speed. The TC is now a second wireless hop from your clients.. this will halve the speed.
In this mode the ethernet are deactived.. for reasons only Apple know, they decided you should not use ethernet when doing this. -
I uploaded 8.0.2, able to continue to use my IPad 3, use internet, WiFi connectivity OK. Then, about 1 1/2 hours later, I loose internet connection, and WiFi connectivity. I rebooted the IPad and attempted to rejoin my WiFi network...no go, message says my password is wrong!! I then, pursuant to a suggestion in the message boards, entered "Forget Network" and then attempted to again join my WiFi. Again, message says "password is wrong" Password is correct; I am on the internet on my desktop via my WiFi network!! Is the 8.0.2 "update" defective and/or compromised?? My partner, who has an IPad Air, also updated to 8.0.2 this afternoon and has had the same problem!!!
Actually, we up-loaded the new OS in the early evening! We now have WiFi connectivity, and this is how it was achieved: turned off the power to our WiFi modem, then turned it back on; wifi booted up; in IPad's Settings, WiFi: toggled the Wi-Fi button off, waited a short while and toggled it back on; choose our network and entered our passcode...IPad finally accepted the passcode. However, at the top left-hand portion of the screen, we now have a "No Service" statement, yet we are wifi connected and have internet service on our various apps!
-
Hello Most times I am not within range of a wi-fi connection is there something i can add to my ipod touch to connect to the internet ?
You can purchase a MiFi or similar device. It acts like a wifi hotspot and connects to the internet via a cellular connection. You need a data plane too.
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CHsQFjAA&ur l=http%3A%2F%2Fwww.verizonwireless.com%2Fb2c%2Fmobilebroadband%2F%3Fpage%3Dprodu cts_mifi&ei=rcWKT-jeBYes8ATi7pDeCQ&usg=AFQjCNGEnpTkiGCnUOHacw5dEOr0BOc7zg&sig2=M 4Xf1Hglj2FYYYfnC5rJTg -
I have a iPad 2 I brought it yesterday and it has an update for iOS 6.1 but it won't let me download it. It keeps saying your no longer connected to the Internet but I'm connected to my wifi. Can you help please
Hi Blueandpink,
If you are running iOS 4, you will need to update the iPad via iTunes on your computer (can't do OTA updates unless you have iOS 5 or higher).
If you have a first generation iPad, unfortunately you won't be able to update to iOS 6 (iOS 5 is the highest you can update to on the original iPad).
If you are on an iPad 2, 3, or 4th generation with iOS 5 and it still isn't working, try holding down on both the Sleep AND Home buttons at the same time for about 10-15 seconds (ignore the red slider button). Keep holding it until the Apple Logo appears. When you see the Apple logo on the black screen, let go of the buttons. This “reset” fixes a lot of iPad issues and might work to resolve the update issue. Try updating again.
Hope this helps!
~Joe -
My wife's titanium powerbook g4 won't connect via ethernet
My wife's g4 titanium powerbook (running 10.5.4) won't connect to the internet in my work apartment via the ethernet cable (only choice). The ip address keeps coming up 169.254.240.149 That usually means that the ethernet card is bad. maybe the driver is just bad. does anyone know how to reinstall the driver for this computer?
My wife's g4 titanium powerbook (running 10.5.4) won't connect to the internet in my work apartment via the ethernet cable (only choice). The ip address keeps coming up 169.254.240.149 That usually means that the ethernet card is bad. maybe the driver is just bad. does anyone know how to reinstall the driver for this computer?
-
my mini is connected to the wifi network, but is not able to connect to the working internet... can anybody help, please?
192 is local address within your network.
Unless the adddress is of a server that can reolve URL names to ip addresses you wont be able to load an external web page.
You can check what it should be by checking your router status page.
Or if you have an iOS device check under settings, W-Fi, select the network your attched to, then see what is next to DNS.
DG -
I was trying to update my iOS to 7.1 but I can't, I have internet connection but if requires WiFi? before I can update my OS just using my phone internet but now I can't. Does OS 7.1 really require WiFi? Thanks!
The iPhone requires wi-fi to update if you try to update over the air, since the phone needs to reboot, thus disconnecting itself. You can update via iTunes and the computer, but you would not be able to tether to the phone for the internet connection, since the phone would disconnect. So, you can either update via wi-fi and the phone, or you can update with a computer that has an internet connection other than the phone.
-
WRVS4400N wireless client has no internet access, unless first connected via cable
Hello everyone,
I recently purchased a WRVS4400N security router and have got a strange problem with it. I set it up as my main router and connected two computers (a desktop and a server) using DHCP. They both work fine, internet is as fast as it should be, no problems whatsoever.
However, when I setup the Wifi SSID (whatever security options I use, same with open/wpa/wpa2) and connect my laptop to it. It is allocated a IP address and windows even says that there is an internet connection. As soon as I try to do anything though, I am dropped. Try to ping an outside server, failure and dropped. Open IE, failure and dropped. I cannot even access my local server connected by wire to the router.
If I connect the laptop via a cable to the router everything works, and it continues to work when I unplug it. So this means that right now I walk over to the router and plug my laptop in for 3 seconds before I unplug it and then use the wifi for a couple of hours without any problem. But as soon as I try to turn on my wireless Logitech SqueezeBox or wireless printer, they fail and take my laptop with it..
I have:
reset the router, used both firmware 2.0.2.1 and 2.0.1.3 and done a factory reset.
Tried to move the router close to the laptop, no difference.
Does anybody have an idea as to what my problem could be?
/thomasHi Dean,
No this isn't from a company. I bought it used from www.tradera.com (like ebay) . The seller tells me it worked fine for him and has agreed to refund me. Thank you for answering, I have worked with some cisco routers and firewalls before but this one really got me pulling my hair.
I take it from your response that this is a known error that is covered by warranty?
/thomas -
I have tried to reset my wifi and use different wifi systems. I am in college, so I have tried to use the internet both on campus and in my home in Dallas, neither of which worked. I JUST WANT TO HAVE INTERNET.
My computer says I am connected to wifi, but when I go to use the Internet, I am not connected.
Usually when this occurs on one Wifi and Internet connection, the wifi router is working, but the router connection to the Internet Service Provider is broken. Resetting the modem or router/modem combination often results in a new connection to the ISP being established (baring any data caps limits, line, modem or ISP troubles)
However your mentioning it's not connecting anywhere your going on wifi or Internet, which could mean your machine has been compromised and possibly blacklisted until it's cleaned up of malware, or you tried to self solve your earlier issues and messed up your Network settings.
I tend to lesser think it's a actual hardware problem, but it might come to that eventually.
You should test the compromised/blacklist theroy by using a Ethernet cable to the modem you know has a good Internet on and powering on/off the modem. (if a router/modem combination, then no need). If you get Internet and not kicked off in a few minutes, then your machine is fine, likely messed up Network settings are too blame.
You can clear everything out by creating a New Location by editing locations and creating a new one, also by going to Airport Advanced > Airport and deleting all the previous connections to start over new. Reboot.
Connect manually to your home network and save in Keychain when it asks.
If this is all too much for you, take it to a local PC/Mac repair shop as they specialize in software/network issues. -
My airport will not connect to the internet via my modem. Worked for 3 years. Suddenly stopped. Main host computer is hp running windows xp.
When trying to connect windows states connection was cancelled. I have had hp checked by compputer repair and still have same problem?The router is much, much newer than the computer, perhaps some characteristic of the WiFi network as it's currently setup is preventing the computer from connecting.
Try to go back to the basics: set your WiFi network to "b" mode only (i.e., turn off "g") and termporarily remove the password from it. See if the computer will at least establish a connection at that point. Then start turning on one thing at a time ("g" mode, then security, etc).
Not sure what format your WEP key is, but if it's not 10 characters (the minimum for the standard, which constitutes a 64-bit key), you can try making it that long. If it's 13 or 26 characters, it might be a higher encryption than the computer can support.
If all else fails, you could try looking on ebay/craigslist for a copy of Tiger to install on the iMac, which would have software support for more WiFi encryption schemes. Also, it would provide software support for USB WiFi adapters that would also be able to connect to more modern networks. -
I am connected to the wifi and show a strong signal strength but I cannot access the internet from the ipod. Can anybody help?
This reply is about problems with Playbook connecting WPA2 wifi networks.
I would suggest to check what kind of wifi network you are trying to connect to. If its an WPA2, this might help.
I was having the same issue until yesterday.
After spending a couple of nights dealing with BB Support techs, I came up with these steps and worked for me, even though that Playbook should connect automatically as other devices do. Moreover, of course I am not going to ask everyday the IT guys for a router reset.
So here it goes :
1- If you own a lap top/pc connected to your work Wifi network, open the network adapter window on the PC. Go to wifi adapter and left-click on properties in order to display detailed connection status.
2- From there you may obtain a valid subnet mask, Default Gateway, Primary DNS and Secondary DNS.
3- Since the IP Address was already obtained by your Playbook while trying to connect, it will be asking for the same IP each time, so write down the Playbook IP too. You can access it from the wifi? Icon on the wifi configuration screen on the playbook.
(The issue here was that for some reason, my Playbook on "auto IP mode" was choosing a different default
gateway number than the correct one. I still can't figure why, but I'm not going to invest more time on it, until a new software update becomes available and go from there.)
4- In your playbook tap the wifi icon and go to saved networks, tap on edit (pencil) and delete the troubled wifi connection.
5- Create manually a new wifi connection and unselect "auto IP mode". You will have the opportunity to copy all the information mentioned above. IP, Subnet Mask, Primary DNS. Secondary DNS and Default Gateway.
6- Tap save and connect.
Hopefully your Playbook will be online and ready to navigate. -
When connecting ipad to my iPhones personal hotspot via wifi it is showin up as 2 connections when only 1 device is connected. Is someone hacking my phone? I only figured out I had a problem when my partner did the exact same set up and it showed up as only 1 device connected. I have changed the password and turned it off/on and etc. the really weird thing is now when my ipad is turned off and I turn my iphone personal hotspot on it shows up with 1 connection (when I don't have anything connected) for about 5 secs and then goes off and then 1 device connected for about 5 secs and then back off. This just keeps going on and off. What is going on. Could my phone have a bug or be hacked. Please help as it is kinda freaking me out. Thanks.
Hello asrt17,
This may occur if your iPhone is connected to your computer via USB, as it will automatically share the connection via USB.
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/TS2756
When Personal Hotspot is enabled, your iOS device automatically shares your Internet connection with your computer when connected using USB.
Example: When you connect iPhone to your computer to charge or sync with iTunes. To avoid unnecessary data charges, turn off Personal Hotspot when not in use.
Cheers,
Allen -
I'm in Afghanistan with limited internet options. I have a wifi service plan I am signed up for however, a log in and password are required via browser log in, not a security key attached to the wifi (like a hotel). Please help...
the appletv will not be able to work on it's own
you can use a computer or iphone acting the role of hotspot login using it's browser and getting internet access and then sharing it with the appletv
so the appletv sees it as a wifi router it connects to -
Just bought MacBook Pro, cannot connect to the Internet at home. I have wifi at home and my iPad and cell phone can connect to the wifi
*** When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu
Troubleshooting advice can depend on that information. -
i am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet. Yesterday i connected without any problem, can anybody tell me why i cannot connect today?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom
Maybe you are looking for
-
Okay, so I have been having trouble with my mail application all week. The window refused to open and would not quit. Today, I tried to shut down my mac and a pop up window told me that I was unable to shutdown because mail was open. After using a ke
-
How to generate multiple output pdf's from one oracle reports
how to generate multiple output pdf's from one oracle reports. I have a report where I have to generate more than one output files from the same report based on a parameter. Each output file is for each parameter. Is this possible in oracle reports,
-
JOB_OPEN, SUBMIT REPORT VIA JOB, JOB_CLOSE, How to get result?
Hi Friends, I am calling reports using jobs as calling job_open, submit report via job.., and job_close. But I want to the output/result of the report. How can I do this? Thanks.
-
List of Structures in PCL1, PCL2, etc.??
Hello experts, I have a tall order to fill... Is there a complete list of all the structures in these tables (PCL1 - PCL4) ? There is a list of structures in Package PCAL (in transaction SE80 - ABAP Workbench). This is NOT what I want. This just li
-
How do I make a printing pre set in Photoshop CS4?
I use Photoshop CS4 and print on an Epson R360. I often print high resolution images, usually jpeg, onto quality Epson paper with certain settings to get the best result. However I am aware that I can set a "pre set" to achieve this without having