Experincing Poping Sounds in STP NOT STP2

Can anyone shed some light on this. When I do my playbacks on the timeline I am constantly hearing a poping sound in STP. This does not happen with any other applications as I've tried them all.
Please if anyone could help that would be great!!!

Hi Peter,
1. The spanning-tree portfast trunk command is setting by the ACS VSAs ( vendor-specific attributes  -> device-traffic-class=switch ) with some other commands:
Applying command... 'no spanning-tree bpduguard enable ' at Gi4/1
Applying command... 'no switchport access vlan 10' at Gi4/1
Applying command... 'no switchport nonegotiate' at Gi4/1
Applying command... 'switchport mode trunk' at Gi4/1
Applying command... 'switchport trunk native vlan 10' at Gi4/1
Applying command... 'spanning-tree portfast trunk' at Gi4/1
If I remove the spanning-tree portfast trunk command by hand it will be overwritten during the next reauthenticate cycle.
2. and 3.
4506-E#show authentication sessions
Interface    MAC Address    Method  Domain  Status Fg Session ID
Gi5/47       0022.bd1b.b22a dot1x   DATA    Auth      AC1179DF0000104A0105F1E8
Gi4/1        f41f.c22b.770a dot1x   DATA    Auth      AC1179DF000018397139BD18
Session count = 2
Key to Session Events Blocked Status Flags:
  A - Applying Policy (multi-line status for details)
  D - Awaiting Deletion
  F - Final Removal in progress
  I - Awaiting IIF ID allocation
  N - Waiting for AAA to come up
  P - Pushed Session
  R - Removing User Profile (multi-line status for details)
  U - Applying User Profile (multi-line status for details)
  X - Unknown Blocker
4506-E#show span int gi4/1
no spanning tree info available for GigabitEthernet4/1
4506-E#show span int gi4/1 detail
no spanning tree info available for GigabitEthernet4/1
4506-E#show span inconsistent
Name                 Interface                Inconsistency
Number of inconsistent ports (segments) in the system : 0
Regards,
Holger

Similar Messages

  • STP not working with my sound card??

    Before upgrading to FCS3, whenever I would export something from FCP to STP, I would not have any audible sound in STP. I thought the upgrade would solve the problem but its gotten worse. Now when I launch STP, I get static. If I play an audio file, you can see the meter moving but no sound. Its like it doesn't recognize the sound card. I have a Black Magic Deck Link HD breakout and all my audio for
    the computer goes through that, except STP. Is STP not compatible with Deck Link or something? any suggestions welcomed. thanks

    I'm having basically the same issues except with STP 2 and a Tascam Us144 MKII, find out a fix for this at all?

  • My sound system does not work AFTER installing pc to tv wireless connection

    my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

    Hi,
    You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
    Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
    one used by the Form contact for Form Invoice.
    Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
    VS General Question forum mainly discusses
    the usage of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
    System and Visual Studio Editor.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • My sound system is not working after my last updates on my imac,what shall i do to get fixed?

    Hello any body who can help me out here?
    My sound system is not working on my imac after the last updates,
    WHAT SHALL I DO FOR????

    apollos211,
    You marked this as solved, so chances are no one else will respond.
    You can try going Applications>utilities>audio MIDI set up, output tab and check to see if built in is selected.
    Also check in system preferences>sound >output and see what is selected there.
    If you look in the headphone port and see a red light (this means it is in digital mode), try taking a set off headphones and plugging them in and out several times also wiggle them around gently. There is a micro switch that sometimes gets stuck.
    Hope this helps, if still no joy try reposting so that more contributers might check it, as once checked as solved it reduces the number of people checking.
    All the best

  • SB04100 Sound Blaster Card not working after computer rebuild

    =SB0400 Sound Blaster Card not working after computer rebuildZ I did a full disk format and reinstall for a friend on a Dimension 3000, running XP SP3. There is no sound at all. Speakers are good, tested on another system. Model number on the back of the sound card is SB0400, so I assume this is an older 24 bit PCI SoundBlaster card. Although I reinstalled all drivers from Dell, I found no drivers for this. The Creative site has no listing for this model.
    Computer does not seem to recognize the card. Have not opened the box yet but I assume if I were to remove and then reinstall the card it would be recognized (?) I then have to find an SB0400 driver.
    Does anyone know where I can find an SB0400 driver ? Does the strategy of pulling and reinstalling the card make sense ? (I have really avoided tampering with any of the hardware on this box -- since it is not mine.)

    Re: SB0400 Sound Blaster Card not working after computer rebuild? Thanks much for your response. Problem solved for now. I removed the board and then reinserted it, after which I was able to download the drivers directly. Some of my difficulty with this whole process has been ) I didn't know there was no working speaker in the computer and 2) I apparently misunderstood the BIOS settings for this. I re-set it up as an add-on board during the troubleshooting process. After loading the driver, I went back to the original setting (don't recall what it was but it was for integrated sound). The setting for integrated sound works fine, with external speakers and the new 24 bit driver. Still some noise (popping and static) but this board shares the bus with 2 other cards one of which is a wireless network card. May be a PCI latency issue but I'm reluctant to change that because the network card is a bit shaky anyway.
    Everything works for now -- I'll be glad to get this particular computer out of my house !

  • Sound quality is not as it used to be! after installing windows 8.1

    i have a hp envy 6-1002tx laptop which came with windows7 HB but i upgraded to windows 8.1 recently.
    since then the sound qualtiy is not the same as it used to be.. it's not loud any more. i have to keep the voulme at 100 to listen. while back when i was using windows 7, even on 60, it was loud enough to be aublible.
    i have installed the sound driver recommended by the HP site for my laptop.
    there is no support for windows 8.1 from HP.

    I completely agree!
    Not only that but if you look at the date of the audio driver, it was released almost a year before W8.1 came out!
    So, how can it be for W8.1?
    Just for kicks, try this driver from a very new model with the IDT audio...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1&cc=us&dlc=en&lc=en...

  • Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

    Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

    Basics from the User Guide are restart, reset, restore from backup, restore as NEW.  Unless you've tried ALL of these, you're not done troubleshooting.

  • External sound system is not working

    Hi, the sound system is not working for my MacBook. It is working perfectly for my PC, however, when I plug it into my mac, every sound playing is being paused (e.g. iTunes are being paused on the second playing). What could be the issue?

    That is what I am asking. It just does not make since that the Macbooks audio out/headphone plug works on some systems and not on that particular system.
    If the system you are trying to use does not plug into the AC wall socket to get power then that could be one of the problems. But I believe you have try to tell us that is does plug into the AC wall plug and then plugs into the Macbooks headphone plug.
    Is it possible that the Jack on the sound system you are experiencing problems with is bad?
    Does the sound actually pause or just cut sound in/out similar to how a loose speaker wire might sound like?
    Have you tried using this sound system on a different computer to see if the problem still exist?

  • I cannot get any sound..it says my sound card is not working properly...how do i fix this.

    HP PC 2000 notebook, windows 7 operating system
    can't get any sound..says the sound card is not working..how can i fix this...

    You need to contact Adobe for you billing problem this is a user four not adobe customer support.
    For your Photoshop Problems this user community may be helpful. 
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • Hi, I need to take my daughter off from our Apple account and set up her own. So, delete her from one account and create her own. Realize I sound imbecilic for not knowing how to do this. Any ideas? Thank you so much. Jules

    Hi, I need to take my daughter off from our Apple account and set up her own. So, delete her from one account and create her own. Realize I sound imbecilic for not knowing how to do this. Any ideas? Thank you so much. Jules

    You don't have to take her off your account exactly: she needs to sign out from your account on her computers and devices. Then she can obtain an Apple ID at http://appleid.apple.com and use it to sign into System Preferences or Settings>iCloud.
    However, there are some issue about this. If she has been syncing her calendars and contacts to your account then the data will disappear from her devices, but remain on your account. Individual calendars can be exported  as .ics files and reimported into her account, but if she has her contacts mixed up with yours she will have to enter them individually in the new account (or export yours, import them into hers, and delete the ones she doesn't want.
    More intractable is the email issue. She cannot move an address from your account to hers, so if she has been using a alias on your account to have her own address she cannot transfer it. She will have to create a new email address.

  • System Profiler see Griffin iMic, but Sound Prefs Does not

    I have 3 Griffin iMics - 2 new white ones and 1 old silver one. All 3 iMics are recognised by my late-2009 iMac 27" i7 running Snow Leopard (10.6.5). However, NONE of these 3 iMics are working on my mid-2009 MacBook Pro 15" 2.8GHz also running Snow Leopard (10.6.5)!
    If I plug any of these iMics into the MacBook Pro, the System Profiler lists them in the USB section, but the Sound preferences does not list them under either the Input or Output tab. When I contacted Griffin about this they suggested it was a fault with my MacBook Pro. However, if I plug-in either of 2 different model Logitech USB headsets (with boom mics), they both appear in the Input/Output tabs of the Sound preferences. So it doesn't seem correct to blame the MacBook Pro for this. But obviously something is wrong!!
    Anyone got any ideas about what's wrong with the iMics and my MacBook Pro and how to fix it?

    Hi mooblie, thanks for checking yes.
    No, Disk Utility does NOT see the disks. And yes, I've checked the preferences in Finder, and I have ticked it so that it shows external drives.
    Further, the Toshiba has "come back to life" (is now recognized), and so just the Maxtor is a problem (which was a problem which as memory serves immediately predated the blue screen/gray screen drama.)
    The Maxtor is not seen on the desktop/finder on my wife's (brand new) Macbook Pro, but is seen in her system profiler as well, BTW.
    So I would think it's just a problem with the drive (which sadly houses my iTunes collection), except for the brief lack of recognition of the TOshiba; and the fact that it seems my printer (also running in via USB) is only sporadically being recognized (had a few "printer is offline" when it was plugged in via USB and also to the wall (electric.))
    FWIW, the TOshiba has no external power, just USB, so has to go directly to the back of the Mini, it was never recognized when I tried to hook it in via a USB hub I have ... the Maxtor (problem drive) has external (AC) power, and that is all hooked up.
    WHile trying to fix the blue screen, I followed various fixes including unplugging everything and holding down the Power button, starting up while holding "shift", holding "c", etc., etc. ...
    Any further insight greatly appreciated!!!
    Marc

  • I have hp laptop from last 2 days sound system is not working

    hi my laptop sound system is not working i cant hear the music

    Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & install the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&​lc=en
    ```````````````````````````````````````
    If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
    1-remove power cord and battery
    2-press power button for 30 seconds
    3-reinstall only power cord for first startup.
    4-power on
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • HT4085 My sound effects is not working

    My sound effects is not working can help me ?

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Make sure sound is not muted.
    http://i1224.photobucket.com/albums/ee374/Diavonex/ac7f6dc314aca5d618ac2f55616be 20e_zpsa92a3ebd.jpg

  • TS1574 optic digital port can't be shut off and the sound of speakers not working! what to do?

    optic digital port can't be shut off and the sound of speakers not working! what to do?
    this happened after taking out the head-phones. Now even after pressing CMD+ALT+P+R when booting - the sound of booting appeares BUT after the desktop is ready the sound doesn't work and sound buttons show the sign "circle with crossed line"

    If there is a red light visible in the audio output port, the switch id stuck.  Insert the earphone jack a few times.  If that fails to trip the switch, try a toothpick or similar device and jiggle it inside the port.  If that fails, try a shot or two of compressed air.  If still no success, go to a repair facility.
    Ciao.

Maybe you are looking for