Expert Help Needed for Preventive Plan Creation

Hi,
I'll need to set up a preventive maintenance plan for a performance based cycle which has a different task for 2500hrs, 5000hrs and 7500hrs with a single measuring point. How should I set up using strategy plan (IP42)? Following is the example of counter reading and its tasks to performed:-
2500H - Task 1
5000H - Task 2
7500H - Task 3
10000H - Task 1
12500H - Task 2
15000H - Task 3
17500H - Task 1
20000H - Task 2
22500H - Task 3
Every 2500H will have a task. And each task will repeat itself from task 1 then 2 then 3 and go back to task 1 again when cycle due. Appreciate any help and advice from you guys.
David

David
you can create a strategy in ip11 with the below hierachy and assign it to task list.  show you a sample:
package 1  2500hrs  hierarchy = 1 (H1)
package 2  5000hrs  hierarchy = 2 (H2)
package 3  7500hrs  hierarchy = 3 (H3)
Then assign the above package to task 1, task 2, task 3 in opration tab page of ia06, after that the system should work as you expected.
Hope it helpful.
Regards,
Jane

Similar Messages

  • Help needed for automatic batch creation for by-products(PP-PI)

    Hi,
    In the Goods Recpt tab in transaction COR1, we have a field for creating a batch manually for the header material. On clicking on create, a pop up is generated whch facilitates creation of batch for the header material.
    At this point, if i go to the material list, I would like to see the same batch number ( same as header) written against the BY-Products.
    Essentially, when i create a batch for the header material, it should also create a batch with the same number for the by-product and populate the same in the materials tab.
    One important thing to note here is that when we click on create batch icon, the data is stored in a structure and the batch is actually created only when the process order is saved.
    Please advise if this can be achived by some standard settings in SAP or do we need to change the standard code. If later is the case, please advise about the point where to insert the required code. I have found a user exit at the point where batch numbe is created manually.
    Please advise.

    As per SAP Batch definition Batch is the quantity or partial quantity of a certain material or product that has been produced according to the same recipe, and represents one homogenous, non- reproducible unit with unique specifications. So logically you cannot have same batch number for two materials.
    If you want to find out the relation between batches of header material and by product that is produced during production, you can use Batch Information Cockpit.
    To see batch details in Batch Cockpit (T-code: BMBC), You have activate Batch where used function in IMG using path : Batch management-->Batch Where used list --> make setting for batch where used list.
    Regards,
    Sachin

  • Help needed for writing query

    help needed for writing query
    i have the following tables(with data) as mentioned below
    FK*-foregin key (SUBJECTS)
    FK**-foregin key (COMBINATION)
    1)SUBJECTS(table name)     
    SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
    2           02           Computer Science
    3           03           Physics
    4           04           Chemistry
    5           05           Mathematics
    7           07           Commerce
    8           08           Computer Applications
    9           09           Biology
    2)COMBINATION
    COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
    383           S1      9           4           2           3
    384           S2      4           2           5           3
    ---------I actually designed the ABOVE table also like this
    3) a)COMBINATION
    COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
    383           S1
    384           S2
    b)COMBINATION_DET
    COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
    1               383          9
    2               383          4
    3               383          2
    4               383          3
    5               384          4
    6               384          2          
    7               384          5
    8               384          3
    Business rule: a combination consists of a maximum of 4 subjects (must contain)
    and the user is less relevant to a COMB_NAME(name of combinations) but user need
    the subjects contained in combinations
    i need the following output
    COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
    383     S1     Biology Chemistry      Computer Science Physics
    384     S2     Chemistry Computer Science Mathematics Physics
    or even this is enough(what i actually needed)
    COMB_ID     subjects
    383           Biology,Chemistry,Computer Science,Physics
    384           Chemistry,Computer Science,Mathematics,Physics
    you can use any of the COMBINATION table(either (2) or (3))
    and i want to know
    1)which design is good in this case
    (i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
    good method to link with same table but if 4 subjects only(and must) comes
    detail table is not neccessary )
    now i am achieving the result by program-coding in C# after getting the rows from oracle
    i am using oracle 9i (also ODP.NET)
    i want to know how can i get the result in the stored procedure itsef.
    2)how it could be designed in any other way.
    any help/suggestion is welcome
    thanks for your time --Pradeesh

    Well I forgot the table-alias, here now with:
    SELECT C.COMB_ID
    , C.COMB_NAME
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
    , (SELECT SUB_NAME
    FROM SUBJECTS
    WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
    FROM COMBINATION C;
    As you need exactly 4 subjects, the columns-solution is just fine I would say.

  • Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

    Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
    System: Windows 7
    Adobe CS5
    Printer: Epson Stylus Photo 1400
    Paper: Inkjet matte presentation paper with slight luster
    Installed latest patch for Adobe CS5
    Epson driver up to date
    After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
    The files I am printing are photographs of dogs with lots of detail  I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
    My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
    Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
    When I change to these settings in printer window: Color Handling:  Printer manages color.  Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
    Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
    Also I am confused as to what ICM color management system to use with this printer and CS5:
    What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
    Do I embed the ICM I choose into the new files I create? 
    Do I view all files in the CS5 workspace in this default ICM?
    Do I set my monitor setting to the same ICM?
    If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
    Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
    Is using the same ICM for all devices what is called a consistent workflow?
    I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

    It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
    I hope this may help...............

  • File missing (file\BCD error code 0Xc0000034 help need for work!

    file missing (file\BCD  error code 0Xc0000034 help need for work!    what can i do?
    have an p 2000 notebook pc

     Hi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
    What is the model or product number of your notebook? What version of Windows is installed?
    Guide to finding your product number
    Which Windows operating system am I running?
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • BAPI needed for Material Planning T-code MD20

    Hi,
    BAPI needed for Material Planning T-code MD20.
    Thank You.

    Hi,
    I looked as I needed one too - no BAPI for this - I guess you need to go with batch input for MD20 (worked fine in my LSMW so I guess in ABAP it should be also good)
    BR,
    Tomek

  • Help need for force to signout All session ! how...

    hi
         help need for force to  signout All session !  how ??
    Solved!
    Go to Solution.

    Hi and welcome to the Skype Community,
    To force a signout of all instances your Skype is signed into please change your password: https://support.skype.com/en/faq/FA95/how-do-i-change-my-password
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Help needed on online theme creation for mobile phones

    Hello everybody,
    I want to create an web application which will create themes for different mobile phones. In that application end user can upload jpg/gif images of there choice and select the mobile phone make like Nokia and also the model number like 6030. After that they can create their desired theme by clicking on a button and also can download it.
    My main problem is how to convert an image into a mobile phone theme (*.thm or *.nth or *.sis).
    Can anybody give any suggestion on this matter?
    Thanks in advance.
    Tanmoy

    Hi everybody,
    My main problem is how to convert an image into a mobile phone theme (*.thm or *.nth or *.sis).
    Please give me any guideline that I can proceed.
    Help needed.
    Thanks in advance.
    Tanmoy

  • Mapping conversion help needed for date

    Hi Experts,
    I need help in message mapping convesion for date field
    The source date field can have value '2010-06-04T02:09:59.610-07:00' or 2010-06-04T02:09:60.610-07:00
    I have to change it to '2010-06-04T02:09:59.000-07:00'. ie, if the seconds are 59.XXX, or 60.XXX, then change to 59.000.
    Please let me know the best way to do this
    Thanks
    Mike

    Again, to make it more clear
    The source date field can have any date value such as
      2010-06-04T02:09:59.610-07:00 -
    This needs to be changed to 2010-06-04T02:09:59.000-07:00
      2010-06-04T02:09:60.610-07:00 -- This needs to be changed to 2010-06-04T02:09:59.000-07:00
    2010-06-04T02:09:60.000-07:00 -- This needs to be changed to 2010-06-04T02:09:59.000-07:00
    2010-06-04T02:09:59.000-07:00  - This need not be changed
    2010-06-04T02:09:58.610-07:00 -- This need not be changed
    2010-06-04T02:09:57.610-07:00  etc etc - These need not be changed.
    The only change using date function is for the first two dates, in which 59.XXX and 60.XXX need to be replaced with  59.000
    Using the above date function, all the seconds 59.XXX, 58.XXX, 60.XXX, etc etc,,, are converted to 59.000, 58.000 and 60.000
    I dont need this as per the requirement. So looks like the UDF needs to be altered a little to accomodate my requirement.
    Please help me.
    Thanks
    Mike

  • Help needed for THE decision

    Hi everyone ☺
    I’m finally planning to start recording what I play, and after some hours of wandering on the web I found some interesting possibilities. Now what I need is to decide which one is more suitable for my needs, and here comes the moment for apple discussions
    Basically, I will record my own music one track/instrument at a time (I’m still not able to play more than one…and I dont’ want to spend 2.000$ to buy a 24-ins device just to record drum tracks), I’d like to have a software with built-in effects for guitar/bass/voice, integrated soundtrack possibilities (to play with video recordings), mixing options for both stereo and surround mixing, and I don’t want any card to be placed into my mac. Well, and obviously the sound quality must be pro-like…as anyone probably wants.
    So, here’s what I came up with:
    a) getting logic pro studio 8 and apogee duet
    b) getting pro tools m-powered and mbox 2
    c) getting one of the two softwares and a Monster iStudioLink Instrument cable and plug instruments directly into the mac
    Now, the questions are:
    if I can plug an instrument directly into my mac and control all parameters via one of the two softwares, what do tools like duet and mbox2 serve for?
    In the case this tools are useful [ ☺ ], why ☺ … and which is the couple software/hardware that can best suit my needs?
    I assume that every software has a proprietary file extension in which audio tracks are saved, so that it should be impossible to record an audio track with one software and edit it with another that has different functions/plugins (ex. from logic to pro tools, from pro tools to cakewalk sonar which I have on a pc etc.). Am I right, or is there any “standard”, non compressed high quality file type in which track can be saved and exported to be edited with different softwares?
    I know that from this post it may easily seem that I’m a hopeless digital idiot, but I swear the situation is not really that bad so no need for the kind of explanations with drawings like the ones you find in the “for dummies” guides lol so every experts’ advice will be greatly appreciated
    Neptune

    Thank you Bee Jay and Pancenter for the lighting-fast and useful answers
    now I am aware that an interface IS NEEDED lol (that means they are not produced without a reasons, are they?). I know Pro Tools is the industry standard but I don't like anyone/anything to tie me to their choices/interests (so that's why I was asking about Pro Tools, knowing that there's some sort of "hardware threat"). What I look for is just quality and if I understood what you both mean, as far as this aspect is concerned, Logic and Pro Tools are substantially comparable...isn't it? On the interfaces side, I already checked the Saffire ones (they seem quite good, and cross-platform use is definitely a plus), I will check the others mentioned and will let you know In fact, I didn't consider the "platform problem" but, as I wrote, I also own a PC with an Audigy 2 soundcard (midi/analog/optical/digital inputs/outputs and firewire port...not Madonna's private studio, but not as sad as Mac's little hole) and Sonar 6 Producer Edition, so that has been a really good point to ponder. And now, in the middle of this software/hardware battle...any personal suggestions based on tests/personal experience?

  • Expert help needed to connect iPhone / iPad using BlueTooth and Wi-Fi

    We need expert help to connect iPhone / iPad using BlueTooth and Wi-Fi. If you have worked with Apple MFi Program [http://developer.apple.com/programs/mfi], or have expertise/experience in this, please contact me. Thanks! Kevin.

    Hi there.
    I connected to my livebox after about three attempts. You have to pair the livebox by pressing either the number one or two that is on the box. When it is in pair mode it stays that way for ten minutes so it gives you chance to try your wep code that is on the bottom of the box a few times. I can't remember which one was successful but i did try the letters in uppercase and lower and one of them seemed to connect.
    Welcome to discussions by the way.
    Hope this helps JB

  • Help Needed for T42 Start-up Problem

    Urgent help need!!!
    I have a ThinkPad T42 with Windows XP installed.  It works perfectly for a while without ever have any problem or error message.  Then suddenly it won’t work anymore.  The symptom is following:
    After power on the laptop the Microsoft window would show up and it prompt me for window logon password.  After I type in the password it then shows “window is loading your personal setting”.  After a long while nothing would show up on the screen other than the background of the normal screen.  There is no window bar at the bottom or any icon on the screen.  If I start in safe mode then everything would show up.  I don’t know what is going on.
    This happened two months ago and I ended up restoring a backup image to get it work again.  It happens again today with the same symptom.  I am really tired of having to restore image backup every 2 months. 
    I would really appreciate it if any of your experts can offer me some insight into this problem.  I am desperate in need of help.
    Thanks very much!

    wangy26, welcome to the forum,
    Have a look at this thread to see if my post there helps. The problem seems to mostly occur at the start of a month, why I don't know. Unfortunately the member didin't report back whether or not this was a viable solution for them.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Help need for badi method me_process_po_cust~check

    Dear All expert
    Pl see following thread
    I am stuck
    Help needed
    http://scn.sap.com/thread/3610303

    See the issue here is HOLD feature in PO should not be there if it meets the error condition.
    For this you can refer another BADI for this purpose ME_HOLD_PO.
    Refer one of my previous threads below , it might be helpful :
    Held Purchase order need not be created.
    Reiterating a thread related to same topic is not a good practice.

  • Query help needed for querybuilder to use with lcm cli

    Hi,
    I had set up several queries to run with the lcm cli in order to back up personal folders, inboxes, etc. to lcmbiar files to use as backups.  I have seen a few posts that are similar, but I have a specific question/concern.
    I just recently had to reference one of these back ups only to find it was incomplete.  Does the query used by the lcm cli also only pull the first 1000 rows? Is there a way to change this limit somwhere?
    Also, since when importing this lcmbiar file for something 'generic' like 'all personal folders', pulls in WAY too much stuff, is there a better way to limit this? I am open to suggestions, but it would almost be better if I could create individual lcmbiar output files on a per user basis.  This way, when/if I need to restore someone's personal folder contents, for example, I could find them by username and import just that lcmbiar file, as opposed to all 3000 of our users.  I am not quite sure how to accomplish this...
    Currently, with my limited windows scripting knowledge, I have set up a bat script to run each morning, that creates a 'runtime' properties file from a template, such that the lcmbiar file gets named uniquely for that day and its content.  Then I call the lcm_cli using the proper command.  The query within the properties file is currently very straightforward - select * from CI_INFOOBJECTS WHERE SI_ANCESTOR = 18.
    To do what I want to do...
    1) I'd first need a current list of usernames in a text file, that could be read (?) in and parsed to single out each user (remember we are talking about 3000) - not sure the best way to get this.
    2) Then instead of just updating the the lcmbiar file name with a unique name as I do currently, I would also update the query (which would be different altogether):  SELECT * from CI_INFOOBJECTS where SI_OWNER = '<username>' AND SI_ANCESTOR = 18.
    In theory, that would grab everything owned by that user in their personal folder - right? and write it to its own lcmbiar file to a location I specify.
    I just think chunking something like this is more effective and BO has no built in back up capability that already does this.  We are on BO 4.0 SP7 right now, move to 4.1 SP4 over the summer.
    Any thoughts on this would be much appreciated.
    thanks,
    Missy

    Just wanted to pass along that SAP Support pointed me to KBA 1969259 which had some good example queries in it (they were helping me with a concern I had over the lcmbiar file output, not with query design).  I was able to tweak one of the sample queries in this KBA to give me more of what I was after...
    SELECT TOP 10000 static, relationships, SI_PARENT_FOLDER_CUID, SI_OWNER, SI_PATH FROM CI_INFOOBJECTS,CI_APPOBJECTS,CI_SYSTEMOBJECTS WHERE (DESCENDENTS ("si_name='Folder Hierarchy'","si_name='<username>'"))
    This exports inboxes, personal folders, categories, and roles, which is more than I was after, but still necessary to back up.. so in a way, it is actually better because I have one lcmbiar file per user - contains all their 'personal' objects.
    So between narrowing down my set of users to only those who actually have saved things to their personal folder and now having a query that actually returns what I expect it to return, along with the help below for a job to clean up these excessive amounts of promotion jobs I am now creating... I am all set!
    Hopefully this can help someone else too!
    Thanks,
    missy

  • Help needed for using BASIC authentication through JDBCRealm

    Help needed.
    Hello,
    I am doing a degree project, so far it works fine in my local machine, I need to try it on my virtual hosting (as it is a live server).
    My project requires JDBCRealm, that is BASIC authentication loading access data from mysql database. Normally this setup can be done in Server.xml file, because my Tomcat hosting is a virtual one, I only have permission to access the web.xml file.
    My question is: is it possible to get it done in an alternative way? In web.xml? Some properties file maybe?
    Thank you very much.

    You can set this up for your context using META-INF/context.xml instead of working with server.xml.
    Make a directory called META-INF under your webapp ( it'll be at the same level as WEB-INF ). Under this, add a context.xml with all your context specific configuration including the realm. A sample is below
    <?xml version="1.0" encoding="UTF-8"?>
    <Context path="/myApp" reloadable="true">
        <Realm
            className="org.apache.catalina.realm.JDBCRealm"            
            driverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"         
            connectionURL="jdbc:microsoft:sqlserver://127.0.0.1:1433;DatabaseName=myDB;SelectMethod=Cursor;"
            connectionName="username" connectionPassword="password"
            digest="MD5" userTable="users" userNameCol="userid" userCredCol="userpassword"
            userRoleTable="user_roles" roleNameCol="rolename"
        />
    </Context>Hope this helps.
    People on the forum help others voluntarily, it's not their job.
    Help them help you.
    Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
    ----------------------------------------------------------------

Maybe you are looking for

  • Performance impact of using Web Services?

    As BEA and other vendors continue to add Web Services support to their enterprise software, what is your plan for quantifying the performance impact and the functional correctness of using web services before going live with the final application? Em

  • Downloaded latest firefox beta and it didnt work also removed all my files from old fire fox how can I retreave my old files and that they work

    <blockquote>Locking duplicate thread.<br> Please continue here: [/questions/749175]<br> Thanks - c</blockquote><br> downloaded fire fox 4 beta once it downloaded it removed my old files as they will no open now how can I get my old fire fox back agai

  • CE 7.2 Java server not running

    Hi, We have installed CE 7.2 on a 32 bit Windows XP SP2 machine with 4GB of ram. According to the 7.2 download page this more than meets the 3GB recommended amount of ram but the server is still not running. The log for server0 is as follows: F  ****

  • OCR text with strange spacing

    We are OCRing large numbers of PDF documents using Abbyy FineReader 9.0 - the recognised text that you can see within the Abbyy program looks great, but if you save the OCR'd files as PDFs & then copy/paste the text out of the resulting PDF file open

  • Find Update Rule mapping!!!

    Hi All, Please let me know a method to find thru a FM or thru any Class (method) the mapping for characteristics in Update rule... I want to find how is target fields mapped with src field in update rule... Regards Aadil Point will be assigned!!!