Expert help needed to connect iPhone / iPad using BlueTooth and Wi-Fi

We need expert help to connect iPhone / iPad using BlueTooth and Wi-Fi. If you have worked with Apple MFi Program [http://developer.apple.com/programs/mfi], or have expertise/experience in this, please contact me. Thanks! Kevin.

Hi there.
I connected to my livebox after about three attempts. You have to pair the livebox by pressing either the number one or two that is on the box. When it is in pair mode it stays that way for ten minutes so it gives you chance to try your wep code that is on the bottom of the box a few times. I can't remember which one was successful but i did try the letters in uppercase and lower and one of them seemed to connect.
Welcome to discussions by the way.
Hope this helps JB

Similar Messages

  • What cable do I need to connect iPhone /iPad to a receiver

    What cable do I need to connect iPhone /iPad to my receiver

    Any stereo audio cable will work strictly for audio, just like your headphones.
    If you want to use AirPlay Mirroring you need an AirPlay - compatible receiver, or an AppleTV.
    Denon, Marantz, Pioneer, Onkyo, Yamaha and others all manufacture AirPlay compatible receivers.

  • How can I connect 2 iPads using bluetooth?

    I have to iPads and would like to connect them using bluetooth but they do not see each other?

    You cannot.
    This is not a feature of ipad.
    iOS: Supported Bluetooth profiles

  • I need to connect my iPad to a projector and USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

    I need to connect my iPad to a projector and have USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

    You can connect via a cable or wireless using an Apple TV.
    http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
    Connect an iPad to a Television or Projector
    http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
    Connecting iPad iPhone or iPod to TV or Projector
    http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
    iPad Accessories: Connections for a TV or Projector
    http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
    You may be interested in AirPlay on the Apple TV:
    http://www.apple.com/airplay/
    Alternately, there are Apple Digital AV Adapters for hardwired connections:
    http://support.apple.com/kb/ht4108
    If your location does’t have wifi to use with the Apple TV, use a portable router.
    Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
     Cheers, Tom

  • I have iphone 6 plus. When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

    I have iphone 6 plus (IOS 8.0.2). When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

    Hello Mogulman46,
    So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off. 
    Use Do Not Disturb on your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht5463
    Regards,
    -Norm G. 

  • When i tried to download iOS8 on my iPad Mini it told me that I needed to connect my iPad to iTunes, I have done that and now it says I need to restore my iPad. How can I get my iPad working without losing everything on my iPad?

    When i tried to download iOS8 on my iPad Mini it told me that I needed to connect my iPad to iTunes, I have done that and now it says I need to restore my iPad. How can I get my iPad working without losing everything on my iPad? I don't want to lose my apps and photos!
    Help would be much appreciated!

    If you are getting the connect to iTunes screen then it's too late to take a new backup and/or copy anything off it. Prior to starting the update did you take a backup, either to the cloud and/or to your computer's iTunes ? If not then have you recently taken a backup that might have your photos and apps content/settings in it ?
    As long as the apps are still in your country's store then you should be able to redownload them via the Purchased tab in the App Store app (and the Purchased link under Quick Links on the right-hand side of the iTunes store homepage on your computer's iTunes), and if the apps store their content on a server/cloud service then you might be able to get their content back from that - if they store their content on the device then you will need to have a backup.
    For our photos you could try doing a search for programs that claim to be able to recover content from a device - I haven't used any so I can't suggest one.

  • TS2446 My Personal security code was entered incorrectly too many times by my child and now it says I need to connect to itunes to resorer and unlock IPad

    My Personal security code was entered incorrectly too many times by my child and now it says I need to connect to itunes to resorer and unlock IPad. Not sure what to do.

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    2. iOS- Forgotten passcode or device disabled after entering wrong passcode
    3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    4. iOS- Understanding passcodes
    5. What to Do If You've Forgotten Your iPhone's Passcode
    6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
    7. Restoring iPod touch after forgotten passcode
    8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
    Forgotten Restrictions Passcode Help
    1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
        If this method does not work, then you will need to fully Restore your
        device as New

  • Why do I need to connect my Ipad mini with my Mac Book Pro via iCloud?

    Why do I need to connect my Ipad mini with my Mac Book Pro via iCloud? I don't have iCloud on my MacBook Pro and only intend to use the mini to check e-mail and use Garage Band and Photo Booth for song writing when traveling . . .

    Thanks Community! I solved the problem. In fact it was not a problem but lack of understanding. These guys at Apple are way ahead in thir thinking. I will try to explain as short as I can.
    In Lion, ihe Prefferences/Display show only two choices: 6-7 steps of resolution and some color tab. No two screens, no two display to overlap, nothing for us to do. "That was the problem"! Everything is automatic.
    When I connected the HDMI cable to the Miniport into a T-bolt slot, the TV screen showed the "spiral galaxy" how Zyriab is calling it. In fact he gave me the best clue. That shows the connection is good. But where is the Mac Book image?
    You have to drag it to the right out of the Mac Book display area, and "voila!" it will continue on the TV screen. The same with the mouse pointer, push it out ofthe Mac Book display area and you see it on the TV sreen. Good image, you can keep the max resolution, etc. The sound is still on the Book's speakers. I have to figure that out.
    Thank everybody, especialy Zyriab, ne was the closest.
    High regards to everybody

  • HT1454 What cable do I need to connect iphone 4 to HD Visio TV?

    What cable do I need to connect iphone 4 to HD Visio TV?

    http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=45&fs =m.iphoneCompatibility%3Diphone4
    http://store.apple.com/us/product/MD098ZM/A/apple-digital-av-adapter?fnode=3a&fs =m.ipadCompatibility%3Dipad3gen
    http://store.apple.com/us/product/MC552ZM/B/apple-vga-adapter?fnode=3a&fs=m.ipad Compatibility%3Dipad3gen
    There is also a component cable but I can't find it

  • I would like to display Netflix on demand on my LG TV.  What cables and/or adaptors will I need to connect mp ipad to the TV?

    I would like to display Netflix on demand on my LG TV.  What cables and/or adaptors will I need to connect mp ipad to the TV?

    Thanks  for helping.  The TV has the following open slots:
    Video in
    R          L    video
    audio  image
    PC Sound
    DVI input
    RGB input
    Upgrade port
    Remote control
    I also have a Time Warner cable box (Scientific Atlanta     Explorer 4240HDC). 
    Do I need to go through that?

  • TS1363 since installing itunes 11.1 i am unable to connect iphone/ipad to itunes?

    since installing itunes 11.1 i am unable to connect iphone/ipad to itunes?

    Hey there Jantje1,
    It sounds like you are unable to launch iTunes and get an error message instead. I would try the troubleshooting outlined in this article named:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    If it comes down to uninstalling, then re installing iTunes altogether, use this link to download the 64 bit version of iTunes directly.
    iTunes 11.1.3 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Help needed in Connecting to SAP From Eclipse

    Hi All,
    Currently, we have a requirement where we need to retrieve data from SAP System and need to upload the same in a Third Party Application (Java based system).
    We are able to create an account in Java Application using Eclipse IDE by hard coding the Account details. We are stuck up in establishing the SAP connection and retrieving the details and then creating the extracted account details in Java application from Eclipse.
    Any pointers on this will be of great help.
    Regards,
    Eureka

    Hi Eureka,
    Please refrain from creating cross-posts in parallel forums, moreover this question is JCo-related and is not directly connected with Java EE 5. The Help needed in Connecting to SAP From Eclipse in the Java Programming forum would be enough. Please continue the discussion there.
    Regards,
    Vladimir

  • Help needed on restoring Iphone..post IOS update..getting an error -1

    Help needed on restoring Iphone..post IOS update..getting an error -1

    try restarting your computer i had that problem i unplugged my phone from itunes restarted my computer and then it worked

  • How to connect my ipad using static ip

    How to connect my ipad using static ip?
    Using Netgear Router.

    Go to Setting > General > Network > WiFi > Then tap the blue icon next to your network, from here you can setup a static IP on your internal network.

  • Looking for app that can connect iPhone / Ipad to generic bluetooth camera

    looking for app that can connect iPhone / Ipad to generic bluetooth camera

    I doubt that you will find one. I have not heard of BT cameras.

Maybe you are looking for

  • BDC is not working in when executing the program in background

    Hi gurus, I have a problem that in BDC is not working when i'm executing the upload program in background thru scheduling(SM36) , while it works fine when i execute directly with NO screen display mode

  • Some reports are not loading

    Hi, i'm working with reports 6i. i use run_product built-in in a particular form. while running a particular report from this form, some reports are generated, some are not loading.. any general issues!! pls help me.

  • MSFT_AD_Base_11.1.1.5.0

    hi I've new installation of oim 11g (bp4) new ad connector MSFT_AD_Base_11.1.1.5.0 manual provision works fine but when I'm using access policy to provision ad resource to user process stacks on running pre-pop adapters Running CONCATFIRSTANDLAST Tar

  • Setting Preview Image for iMovie

    I just created several tutorial videos using iMovie. The videos are embedded in an online course I'm developing. Does anyone know how to set the preview image that appears for the video? Right now, the preview image (i.e. the image that appeard under

  • Photoshop Elements 9 share to Ceiva

    For years we have used the share to ceiva frame feature of  photshop elements 9.  It is NO LONGER a choice (Poof).  What happened to it ??????