EXPIRED BETA 3, Purple DFU mode screen, and error 1012

Hey this morning my iphone ran out of batteries i plugged it in and it came on with the plug into itunes symbols. so i plug it in and itunes tells me im running expired software and i need to update, so i download the beta 5 from the portal and try a restore and every time i try it i get error 1012 and my phone is stuck in purple dfu mode screen.
Anyone that could help me get my phone back alive would be much appreciated.

http://developer.apple.com/support/iphone/forums/

Similar Messages

IPhone keeps returning to DFU Mode, Screen turns white then yellow when restoring

I recently got a iPhone 3GS, I didnt jailbreak or anything. I was planning to restore and update to 6.1.3. After the restore it went directly to DFU Mode and wont exit. When I restored again, the screen turned white, when the itunes said preparing to restore, the screen turned yellow and restore proccess wont continue. PLEASE HELP!!!!!!!

I have the same problem. An iPhone 4S, 6 months old, stuck in DFU mode, black screen and iTunes can't restore (error 1600). Tried reloading iTunes, tried 3 different computers (Win 7, Vista, OSX) all report the same problem.
This phone has never been jailbroken (don't need that in Oz because my carrier doesn't lock their phones). It still had the original iOS that it came with from Apple.
Like migsiliciousI read lots of post about using jailbreak software to kick the phone out of restore mode without installing a custom OS, but I'm not going to try that as the phone is still under warranty. If there is no simple solution to the 1600 error, then I'm going to have to travel 40km to the nearest Apple Store and see what they can do.

What is DFU mode? and how do I know my ipod is in DFU mode?

My ipod only charges when its turned off and I read it might be on DFU mode

DFU Mode - The iPhone Wiki
If the iPod turn on it is not in DFU mode.
If in DFY mode you restore via iTunes to get the iPod back to operation (unless there is a hardware problem)

Yellow lines and some purple around the screen, and freezing, help?!

hi i have an iMac G4 First generation, and lately, the computer has been malfunctioning in the strangest way;
its been either crashing and freezing up, OR invaded by yellow and orange lines all around the screen... i tried a clean install of system software and still no luck at all. i took out the extra ram that was in there, and still hasnt worked. yellow and orange still appears around the screen, and sometimes, the mouse seems to have black bars forming a square shape over it.
please help if anyone can. i would love to find a solution available that doesnt involve having to bring it in and replace hardware, however, i know that it is probably unlikely to be able to
these yellow marks around the screen are frightening!
thanks!
hope someone can help me
imac G4 Mac OS X (10.4) 1st generation, superdrive

Hello Blake:
Read the information from Apple below and see if it applies:
http://www.apple.com/support/imac/repairextensionprogram/
Barry
Edit: Oops, sorry Blake - that applies to G5's. I would take your G4 to either an Apple store or an Apple certified technician.
Message was edited by: Barry Hemphill (correcting information)

Apple iPhone 5S blue screen and error 14 while restoring

Got my new iPhone 5S for 2 weeks. Suddenly he became to show blue screen of death and restore after about an hour. I read, that it can be caused by iWork apps, but i didn`t even open them. After another blue screen iPhone moved in a cyclic reboot. Tried to restore via itunes, but never finished because of blue screen when installing iOS and occured error #14. Tried many hints, but still haven`t solution. Please help!

i`ve tried all hints. disabled antivirus and firewall. cleaned hosts, many usb ports, 2 pc`s (win7). in dfu mode error 40 appears.

Blue Screen and error 14 to Restore

my iphone 5s present esta Problem and remains stuck in DFU mode, so WHEN I connect a Blue Screen Restore it and THEN Presents Presents Error 14 ... someone help me with this problem

Hi carpeiron,
Welcome to the Apple Support Communities!
I understand that you are experiencing a blue screen on your iPhone 5s and furthermore when you try to restore, you receive error 14. Error 14 can come up for either a USB related issue or a Hardware issue. Please use the attached article to troubleshoot this restore error 14.
Resolve iOS update and restore errors - Apple Support
Best regards,
Joe

Hp g6-1278sa get blue screen and error message when trying to load xp pro

I have setup a new 500gb toshiba SATA 2 harddrive to run daul boot.
Windows XP pro 32bit and windows 64bit.
Unable to install XP pro, just goes into error and blue screen.
Ive removed the harddrive and placed it in my Packard Bell, loaded XP pro 32bit and win 8 64bit with no problem, and both run fine.
Removed the harddrive from the packard bell laptop and place it back into the HP g6-1278sa, daul boot screen on start up.
Opptions windows 8 or earlyer windows.
Windows 8 works fine.
Windows XP pro starts to load and then we get the blue screen with error message.

Hi Powlers
Ok read this tutorial ( link below ) in how to install XP within Windows 8 OR running Virtual Machine
  http://www.howtogeek.com/171395/how-to-get-windows-xp-mode-on-windows-8/
  OR
  http://www.fixedbyvonnie.com/2014/03/legally-install-windows-xp-free-windows-8-using-virtualbox/
Quick question :: What operating system was your machine shipped with initially ??? Windows 7 ???
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Touchsmart PC 300-1120 Blue screen and error messages

My computer turns on and I can access the internet however it will all of sudden kick me off the internet and a blue screen appears that says: Kernel_data-Inpage-Error and then advises me to remove any new hardware or software. When I hit enter it goes to a black screen and another message comes up that says Reboot and Select proper boot device but when you hit enter it just repeats and you cannot get out. Won't even allow me to ctrl-alt-delete to shut down. Only thing I can do is pull the plug.
Anybody know what sort of error these could be and what can be wrong? The only new software is Adobe Reader update and looks like Microsoft updates recently.

Hello Sydberry,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your computer enters into a blue screen event, and I would be happy to assist you! To begin, I will need to ask you a few questions:
What is the Product and Model Number of your desktop computer?
What version of Windows do you have installed on your computer?
Has your computer completed all of its important Windows Updates?
Have you updated your HP drivers using the HP Support Assistant?
Is this an on-going, or recent issue?
Is your anti-virus software up to date?
Is the BIOS on your computer up to date?
In the meantime, I recommend following this document on BSOD Kernel Data Inpage Error. This should help identify the root of the blue screen event in relation to kernel error.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

HELP, i was used the beta version for ios 7, and i put my phone into dfu mode. And now, it won't activate. PLEASE HELP!?!?!

Le question basically.

Bummer for you then, huh? Guess that's what you get for using pirated software. You've forfeited your abilit to get assistance on this forum by pirating Apple's software.
Look elsewhere on the internet, or pay $99 to join as a developer and then you can get access to the forum that might have your answer.

I have an iMac G4 PowerPC with OS 10.5.? The OS10.5.8 update failed. Now get blue screen and error-can't find Intel Power Manager. What now??

I have an iMac G4 PowerPC with OS 10.5.? After deleting 17G of music files to make room on the 74G drive, The iPhoto and iWeb updates seemed to load okay, but the OS 10.5.8 update failed - message opened said the computer encountered an error and must shut down. Now I get the blue screen. Startup with 'V' pressed shows multiple lines saying: error-can't find IntelCPU Power Manager. What now?? I reset PRAM, I think.....?????

I am concerned that you might have applied a system updated intended for an Intel iMac, while you have a PPC (non-Intel) iMac. Your PPC OS should not be looking for an "IntelCPU Power Manager."
Have you tried booting from the 10.5 install DVD/CD and repairing the hard drive, plus repairing permissions?
If you done the repairs mentioned above, and your problem still persists, you can also try doing a safe boot. (see http://support.apple.com/kb/HT1455 ) Then, if none of these things worked, if I were in your shoes (it's hard to diagnose these things without being there in person) I would first check that there is adequate disk space, then I would boot from the 10.5 DVD/CD install disk and reinstall the operating system. There is an option to do an archive and install preserving user files/settings, that would be the option you want, as it will save your files but install a new OS. Make sure you have a good backup of your files first. If you do not have one, use "target mode" to copy all your files before embarking on an new OS install. Assuming that you do succeed with this install, then use Software Update to get the right updates for your iMac.

I keep getting blue screen and error message to remove this file from system. spooldr.sys

HP Officejet 4500 Wireless All-in-One Printer - G510n    w/operating system     Windows XP Professional
I installed the printer in February and the disk did not finalize the setup process. I went online and
down loaded the drivers and software that was offered from the HP website.
The printer works, but as the months have gone along, I keep getting updates for the printer and
the system needs to reboot and it does automatically.
Now I am getting a blue screen with a critical dump error message. HP error reporting keeps sending
the same message back to restore to earlier date before the updates. That worked for awhile. Now
HP Error system says that malware has corrupted and needs to remove system file     spooldr.sys
Is this in your driver software. Spooldr is the system that caches pages of data for printing in chronological
order....
Can I uninstall my software and drivers and change to the plain & simple, print and scan to prevent the
spool driver from loading to my system?

Thank you for your input. But, It is amazing that you can tell me that I was infected with rootkit.
Without information as to how to fix, your information is after the fact and useless.
I used the Safety Scanner provided to me by HP.  A full scan didn't detect any Malware in any files on my system. But the last screen dump provided the information that   spooldr.sys was corrupted and needed
to be removed.
Coming into HP Form, I did read on the HP website that my system Windows XP Professional was not listed
and noted that the software may have not been just what I needed. This was the reason for the question
about uninstalling and reinstalling less of the program. I really don't need my printer to print backward and
that is all I see that it is doing that other printers don't.
Besides, Kudos goes to the person from HP who sent the email, suggesting I used the HP Update software and drives recommended for my computer system. Computer, printer is working, back to normal and hasn't taken a dump since, I uploaded software and drives for Windows XP Professional.

Iphone recovery blue screen and error 4013

Been trying to recover my iPhone 5S which just started rebooting itself and freezing a few days ago. It has taken me 3 days to down load the update software from Apple site as the phone was on 7.1.1 Now in recovery mode and cant change it. I was getting error 9 then managed to get the software restored to the phone which now has the recovery logo in red which I see as progress. But it crashed while doing the firmware update from iTunes.Rebooted my PC to see if it would help but now get an error 4013. My PC has let the latest iTunes updated on it and tried another cable, still no joy.

Dibs28 wrote:
Thanks, looked through that document already and tried to a raise a support call but out of warranty so on my own unless I want to pay for support.
If it is determined that it is a hardware issue, then you should be able to get the support payment refunded. Of course, in that case, you're looking at a $269 USD + tax out-of-warranty replacement cost.
Or you can go to an Apple Store for free assistance to determine if it is a hardware failure or not.

Blue Screen and Error code help

I got up for a few moments then come back to see my computer Blue Screened, first time ever for me. Its running win XP and is roughly 1 1\2 years old and i have no idea what even caused the blue screen much less how to fix it so it wont happen again
The error code
c:\DOCUME~1\0\Owner\Locals~1\Temp\WER309f.dir00\Mini072409-01.dmp
c:\DOCUME~1\0\Owner\Locals~1\Temp\WER309f.dir00\sysdata.xml
BCCode 10000007e
BCP1 C00000005
BCP2 000000000
BCP3 EDEDDBB8
BCP4 EDEDD8B4
OSVer 5_1_2600
SP 2_0
Product 256_1

Not 100% sure without looking at it honestly. If it happens again I would take it in to your local store for a diagnostic.
Adam
Best Buy Community - Retail, Americas
Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
*Remember to mark your questions solved and click the star under the user's name to show your thanks!

Stuck on restore screen and error 3194

Hi, my ipad is stuck on the restore screen but when I go to restore it error 3194 displays. How can I sort thi

You can't get help here because you jailbroke -- probably wasn't the best idea. Try Recovery Mode: http://support.apple.com/kb/HT1808. You can avoid problems like this in the future by not jailbreaking.

My IPad 2 which I bought very recently is apparently the wrong build for Ios5 I tried DFU mode the same error occurs please help

WHat do i do now? It will not update no matter what i do and it is an Ipad 2 purchased only a few weeks ago

Calm down. They are all the same. First, make sure your. I tunes is version 10.5. Then plug the ipad into the computer. On the left side, your pad should show up as a device. Click it. Then i tunes will guide you thru the update. In theory, anyway....

EXPIRED BETA 3, Purple DFU mode screen, and error 1012

Similar Messages

Maybe you are looking for