Expired Items Report

Hi,
I'm trying to create a expired items report component. If I look at wwv_things you find the columns:
- EXPIREMODE (Values PERMANENT,DATE,NUMBER)
- EXPIREDATE
- EXPIRENUMBER
With this I'm able to determine whether an item is expired. However I cannot build a report on this because of security reasons (wwv_things is not granted to PORTAL30_PUBLIC). The view to use is called WWSBR_ALL_ITEMS. However, this view only has a EXPIREDATE column. This is not enough to determine whether an item is expired. How do I determine whether an item is expired using this view ?
It would be nice if a next Portal version has an Expired Items Portlet showing the expired items of the logged on user.
Thanks in advance,
Willem-Pieter van der Lugt
null

Wiilem-Pieter,
A bug has been filed for this issue. The view should contain EXPIREMODE and EXPIRENUMBER columns. We will release the new views on OTN as soon as its available.

Similar Messages

AP cleared Item Report

Hi,
I am use SAP query to build a AP cleared Item report. The report is similar as we can get from FBL1n, but I need a column as group key, which can not be found in FBL1n report.
My questions is:
1. When using SAP query, I use table LFA1 and BSAK, everything is ok, except I could only get the uncleared Item in the table. Like for one item have both Credit and Debit, I could find them in my report. What shall I do?
The field used in the report:
Company Code: BSAK-BUKRS
Vendor Code: BSAK-LIFNR
Vendor Name: LFA1-NAME1
Payment Type(Group Key):
Posting Date: BSAK-BUDAT
Clearing Date: BSAK-AUGDT
Document Type: BSAK-BLART
Fiscal Period: BSAK-MONAT
Fiscal Year: BSAK-GJAHR
2. Or if I just need to have a report like FBL1n, but have group key on the report, any other report I could use?

Hi
Sorry for my unclear question...
What I need is: We need a report on Vendor cleared items, which have a column is Payment Type, to refer to what kind of payment to the vendor, like it's a Adv. fee. Our solution is to use GROUP KEY field in the vendor master data to maintain the payment type information, as it's vendor specified. So for common understanding, we could use FBL1n report, use GROUP KEY as a selection and run out the report. Unfortuntely, we could select by GROUP KEY, but we can not have it shown on the report, from the layout.
So we decided to use SAP Query, which is not a very difficult one. But I found from Query, and the table/ field I refered in my previous message, I could only see some of the records. If one item is cleared in BSAK, I could not find them in my query report made by me. So hope this time my question is cleared, thanks very much.
Or, if our need is to find a proper field to maintain a information in master data, and also can be shown in the FBL1n report, may u suggest?

Reset Cleared Documents and Vendor Open Items Report FBL1N

Hi all,
I have following scenario:
- In last month, we had 2 documents (invoice and payment) cleared against each other. We created open items report as well as open items correspondence sent to Vendor. Obviously, the docs were not included in report.
- In this month, we have reset and reverse clearing document of the documents. We create report again with the open key date as in last month. It should not include the 2 docs but it did with whichever key date we chose.
Is there any setting that open item report doesn't include cleared item at the key date when we run report for previous month?
Thanks and Regards,
Dau

Hi Dau,
If i understand you correctly then you posted and paid invoice in Jan 2012 and generated the open line item report for Jan which correctly did not include this cleared invoice.
Now in Feb 2012 you reset and reversed this payment document.
The issue is when you execute the report FBL1N again then you get the open line item for this invoice correct. Please confirm what is the open item key date that you are using here for generating this report
If you keep it 31.01.2012 then definetly this invoice should not appear in the report but if you keep that 29.12.2012 then this line item would for sure appear.
The importance of key date is to limit the report to certain date. The system selects all items posted up to and including the specified key date and open for this period.
so I think your issue is with the key date.
Hope this helps you.
Regards,
Prasad

ABC-analysis in Open Items report

Good day, dear experts!
I got a task from my chief to find out how to use menu path "Go to - ABC analysis" in Open Items report FBL1N/FBL5N.
Everything I've found is a message "ABC analysis not possible here", Message no. 0K076, and old-old note for this message 414907.
Do someone use ABC-analysis for open items?
I think it's useless, but maybe I don't understand something...
Irina

Hi,
Nope, it is useful.
Execute FBL1N and select line items (Edit > Select All).
Then click on any amount column.
Then click on Goto > ABC Analysis
You will get the options to classify the line items in the A, B, C categories based on the % creteria etc. on that screen.
Regards,
Gaurav

Vendor open items report without page break after changing vendor account

Hi,
I would like to get the vendor open items report without pagination when the vendor account changes.
The option of deleting the * mark in the Filter page is not valid for me, because this way the vendor's name dissappear. I mean, it would be ok if I could show in the output of the report the name of the vendors.
Thanks in advance.

HI,
If I understood your issue correctly then in the report S_ALR_87012085 is a field "Summarization level (0-4)" in the output controls.
You just have to set this field to the value '2'.
When you set the field to two, the page break will first executed, when the page is "full".
If you want to see information about the "Summarization level (0-4)" field, you just have to set the cursor in it, and press F1.
I believe this answer solve your problem.
Please assign points if it useful.
Regards
Ravinagh Boni

**URGENT** - Vendor Line Item Reporting

Dear Gurus,
Need some URGENT help with regards to Vendor Reporting?
Our business has requested for a Vendor Line Item / header Report, which will display ALL Vendor Items NET (before tax).
At the moment our business it manually taking out Tax in FBL1n (Vendor Line Item Report).
Please could you kindly let me know if there is ANY report in SAP which displays the Vendor Items NET & GROSS??
Thanks Very Much
RICK
Edited by: Rick Desilva on Apr 22, 2008 4:00 PM

Hi Shridhar,
All I want is a "net column" - Which will display the vendor invocie amount - BEFORE VAT (Tax).
So on FBL1N or Another SAP-Vendor Report what I need is a
Net Amount column and a Gross Amount Column.
I hope this makes sense and someone can assist....
Thanks & Regards
RICK
Edited by: Rick Desilva on Apr 23, 2008 9:36 AM

Asset Balances & Cost Line items Report

Hi,
I am looking for a Report which would combine Asset (S_ALR_87011963)balance report and Cost line item Report(CJi3) for Projects.

Hi,
The flow is like this ( if u r using timesheets for confirmation):
CAT2 : Timesheet: Enter Times : User enters the time.
CATS_APPR_LITE : Approval of timesheet
CAT5 : Transfer to Projects.
This will post cost to Projects.
Another way of getting the Actual cost is Confirmation using CN25 or CN29.
Regards,

WBS Element on AR/AP Line Item Report

Hi All
When I run the FBL1n report for a vendor who has a PO which has a WBS element - I dont see the WBS element coming up on the line item report(s).
Although the field is there on the layout - it is not picking the WBS Element into the report - can anyone please tell me why this is and how I can get this field to fill with values...
Thank you
Rukshana

hi,
If you had activated Project Cash Management, you can try report CJIA which can substitute the report line item wise list for a particular project or for a Particular Vendor.
Why the standard system is not showing WBS because, a single Vendor line can be posted against multiple expense so system cannot determine which WBS to be shown in the report so it is left blank in reports, this will be applicable for Purchase order no, Cost Centers, WBS etc.
As suggested by Suresh you can use the BTE 1650, but it will keep one WBS in the line even you have multiple WBS elements used for the document posting.
For Ex
Expense 1 Dr 1000- WBS 1
Expense 2 Dr 1000- WBS 2
Expense 3 Dr 1000- WBS 3
Vendor A Cr 3000
Against Vendor line item A - it will show WBS 1 alone.As there is no standard solution you can use BTE if your are satisfied with the above example or you have to activate Project Cash management to find the exact reporting but in different reporting structure.
Thanks and regards
Praveen.J

AP Line-Item Report for State Auditors

Dear Members,
I am preparing one Report named AP Line-Item Report for State Auditors and i need the following fields in my report.
Check Number                PAYR-CHECT
Voucher Number             BSEG-BELNR
Check Date                     PAYR-ZALDT
Voucher Date                     BKPF-BUDAT
Vendor Number             LFA1-LIFNR
Vendor Name                     ADRC-NAME1
Vendor Street Address     ADRC-STREET
Vendor City                     ADRC-CITY1
Vendor State                     ADRC-REGIO
Vendor Zip Code             ADRC-POST_CODE1
General Ledger Acct No     BSEG-HKONT
Purchase Order Number     BSEG-EBELN
Tax Status Code             BSEG-MWSKZ
Taxable Amount             BSEG-HWBAS
Exempt Amount             BSEG-MWSTS
Tax                                     BSEG-MWSTS
Tax Accrued                     BSEG-MWSTS
Total Invoice                      BSEG-DMBTR
I am new to FI.So I request some one please let me know which datasources contain the above fields and which CUBE is best suited for this.
Thanks in Advance for help and quick reply is much much appreciated.
Best Regards
RC

0VENDOR_ATTR - Vendor Master Data Attributes
0FI_AP_51 - Check Register Line Items
0FI_AP_4 - Accounts Payable Line Items
It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table.

COPA line item report, Number format -output type - object list(ALV).

Hi,
I am preparing COPA line item report. I want to change number format (two decimal place). I did the changes in form level then I did the changes in drill down report as well and saved as save definition.
But changes are not reflecting in- output type - object list(ALV).
Please provide help in this.
Regards

HI
What t-code you are using to write this line item report ?

Web Item Report Error

I am running a web report that just has a query in it (testing). When I run it I get the error:
Web template error in specifications for the Web item report
The parameter REPORT for the Report Web item in the Web template is empty or missing
Add the Report Design (parameter REPORT) with the BEx Web Application Designer
Contact your system administrator. This error was recorded
Has anyone experienced this before?
Thanks, Mark.

Hi Karol...
I know this is a very old thread, but we just recently upgraded a sandbox to 7.0 and just trying out all the functionality.
I received the same error as the starter of this thread did but I'm just executing a query (that I created from the Query designer) on to the web (no WAD involved)... This function could've been calling the 0REPORT_DEFAULT_TEMPLATE where it's getting the error from. I reactivated the business content but I still couldn't resolve the problem.
That said, I couldn't really alter the business content using your suggestion for this because it is a template where other queries might be calling it... right? or am I missing something?
Regards,
Fionna

Line item report on secondary cost element (cat - 21)

Hi Gurus,
Secondary cost element with category 21 is used for internat settlement from order to wbs or wbs to cost center. But can we see line item report on this cost element. Or we cannot see any line item report on this cost element. it is just used for internal settlement purpose.
Please clear this doubt. thank you

Hi Mohit,
I hope you can have line item report @ order and WBS element stright away...
for orders use: KOB1 transaction code for actual line items, where you have the facility of entering CE or CE group to find the vaues related to particular cost elements in the order. If you are flexible with CEs related to 21, give there otherwise create a CE group specific to 21 category and enter the group and find the results you want.
same way for WBS elements/projects: we have transaction code CJI3 for actual line items, here also we can enter CE or CE groups
Not only for actual line items, we have the option of viewing plan line items, budget line items, and commitment line items @ both order and WBS level with different transaction codes other than mentioned above, like KOB2, KOB3, CJI4, CJI2 etc
I hope it helps a lot if I understand your query right
Regards..
Jose

Line item report with Customer number

Hi all,
I am facing the following issue:
I need a line item report to analyze an accrual account by customer.
Since the customer is not captured on the accrual account itself, but on the recon. account (which is not defined as line item display), I did not find a way to present the customer and the accrual on the same line.
I can always go to BSEG and vlookup and match by document number the accrual account and the customers from the customer recon. account, but I thought maybe someone has a better idea.
Thanks,
Yoel.

If the recon account line items have al lthe info needed I'd suggest using a query (SQ01).
1. Create an Infoset in SQ02 with logical database "BRM". Choose the fields from BSEG that you need
2. Create the Query in SQ01 using that Infoset.
If you want to see individual line items, include the fields you want in the "basic list" of the query. If you want totals by customer, don't include anything in the basic list, but make a "statistics" with customer and amount.
Selections would habe to be made for account no and period.

Create AP/AR line item report for parked items

Dear all,
Has anyone been able to create a line item report in AP or AR that includes parked items? I have created an aging report using standard 0SAPDUEAN-01 as a base, using report painter. Now the Finance department want to be able to see the numbers of the parked invoices as well but I am not able to find a way to pull these.
Does anyone know if this is actually possible?
many thanks

Hi,
by using of TCODE. FBV3 it is displaying parked documents
based on document type.
K.Satish

SKF line item report

Hi,
What is the t.code to see SKF line item report
Bye,
Ramesh

Hi,
I an the report the total value are appearing and when i am selecting the actual line items the message is "Assign a receiver report to the report". What should i do?
Bye,
Ramesh

Expired Items Report

Similar Messages

Maybe you are looking for