Expired Lot quantity incorrect in MRP Planner Workbench

Hello,
We have an issue with Expired Lots in the planer workbench.
- We have an Expired Lot of material in quantity 5000 pcs.
- In MRP, the system should create an "Expired Lot" demand of 5000 pcs to net out the expired lot quantity from the beginning on hand.
- But, MRP creates an "Expired Lot" demand for only 4988 pcs.
Has anyone seen this behavior before?
Can anyone explain the logic of why the "Expired Lot" demand is only 4988 when the actual lot quantity is 5000?
Or, am I facing another bug?
Appreciate an advice.
Thanks,
Mark

Similar Messages

Mrp planner workbench inactive

Hi All
need help..
Why suddenly my MRP Planner workbench is inactive?
when I 've done running MRP. What processes can cause this?
thanks.
the pooh

Hi,
To understand more clearly, Please let me know below
Able to navigate to workbench through Menu?
Further, selecting the respective plan, are you able to select respecting plan workbench?
Would like to know, whether you are not at all query in WB or able to query but getting empty result in WB?
Thanks,
Ram

ESYU: Planner Workbench Release process가 다른 user로부터 planned orders를 release

Purpose
Materials Requirement Planning - Version: 11.5.9 to 12.1
Information in this document applies to any platform.
11.5.9 ~ R12 version:
두 명의 users가 MRP Planner Workbench에서 Release를 위해 records updating을 진행하는 경우, 두 명 중 한명만이 update 후 실제로 release를
submit 했으나 두 명 user의 모든 records가 release 되어 버린다.
User1은 자신의 Planned Orders 만을 release 할 수 있고, User2 또한 자신의 저장된 Planned Orders 만을 release 해야 한다.
STEPS:
1. User 1이 MRP Planned Workbench로 log
2. User 1은 특정 planner code를 위한 current planned order recommendations 을 찾는다.
3. User 2가 MRP Planned Workbench로 log
4. User 2가 특정 planner code를 위한 current planned order recommendations 을 찾는다.
5. User1은 All for Release를 선택
6. User2도 All for Release를 선택
7. User1은 checking process를 끝낸 후 저장
8. User2는 아직 checking process를 끝내지 못해 save를 아지 않은 상태로 남아 있다.
9. User1이 [Release] button을 선택
10. User1이 [Release] button을 선택시 User1과 User2에 의해 저장되거나 check 된 모든 planned order recommendations이 Work in Process와
Puchasing modules로 released 되어 버림
Cause
이 issue의 원인은 현재 MRP planning의 경우 expected functionality 이다.
MRP Workbench Release process는 모든 planner에 의해 check 되거나 저장된 모든 planned orders를 항상 release 한다.
Bug 891669 : Enhancement Request
PLANNER'S WORKBENCH SHOULD RELEASE ORDERS BASED ON PLANNER NAME NOT BY BATCH
It is explained that this is current functionality in the following rejected Enhancement Request:
Bug 891669 : PLANNER'S WORKBENCH SHOULD RELEASE ORDERS BASED ON PLANNER NAME NOT BY BATCH
Solution
Solution을 적용하기 위해 아래 steps을 실행:
1. 모든 planner에 의해 check 되거나 저장된 모든 planned orders가 [Release] button에 의해 항상 release 되는것은 현재 MRP Workbench
Release process에서는 correct functionality 이다.
2. ASCP Planning의 경우엔 Planner/User에 의해 Release process가 아래 option에 의해 처리 가능하다.
-- profile MSC:Released Only By User
-- Standard MRP에서는 이 option은 사용할 수 없고 고려되지 않는다.
Reference
Note 311053.1

Can I releases planned orders in planner workbench using inventory planner responsability (IO)

Can I releases planned orders in planner workbench using inventory planner responsability (IO), in IO manual I found following information :
Planner Workbench
You can use the Planner Workbench in Oracle Advanced Supply Chain Planning to act on recommendations generated by the planning process for a plan. You can implement
planned orders as discrete jobs or purchase requisitions, maintain planned orders, reschedule scheduled receipts, and implement repetitive schedules. You can choose all
suggestions from an MRP plan, or only those that meet a certain criteria. In Oracle Inventory Optimization, Planner Workbench is used to perform tasks such as setting up
item attributes, setting up supply chain BOM, and analyzing time-phased safety stocks.
my question is Oracle Inventory Optimization, Planner Workbench can´t release planned orders.
Thanks in advance
regards James

Hi James,
We cannot release planned orders from IO workbench.
IO is for safety stock planning, not for releasing planned orders. That is done from an ASCP plan which uses the IO plan as demand schedule.
Regards,
Mohan Balaji
NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

Inspection lot quantity in manual inspection lot (T.Code-QA01)

Dear Experts,
I have activated inspection setup "89" with lot origin '89".I have activated this inspection set up to a material in QM view.
When i want to create a manual inspection lot through T.Code QA01, the inspection lot quantity is a required field. But i do not want to enter a quantity here. I want to create manual inspection lot without quantity. Is it possible?
If yes, please suggest how to proceed.
Your help is highly appriciable.
Regards
Vivek

hi
Use User Exit :QPL10001
Description
    You can use this enhancement to change all the fields when creating an
    inspection lot. The function module is only run once.
    You must be careful when using this enhancement since this can lead to
    inconsistencies in inventory management. For example, if you change the
    quantity fields.
Logic:
Logic will be when you are using a specific Material say MATNR : xyz .......then disable the Qty field LOSMENGE.
I hope this will help you
Regards
Sujit

Auto allocation for a move order with an expired lot doesn't work

Hello everyone,
We are facing a major problem regarding the use of move orders for issuing expired lots.
Scenario:
1. Create a move order. Fill in: Item, Qty, Source Subinv and Lot. Lot is expired.
2. Approve move order.
3. Run "Move Order Pick Slip" with "Autoallocate Unallocated lines".
4. Open Transact Move Order Form. Try to transact.
Result:
No allocations were created.
If we check row and push "allocate" button result is still "None".
Only way to finish the process is to open "View/Update Allocations" and pick a locator manually.
We work with a lot of expired lots, and doing that manually is a lousy workaround.
Does anyone know if that is standard functionality? Because documentation does not refer this issue.
Thanks,
Aaron

See also: http://forums.adobe.com/message/4662367#4662367
-Noel

Updting Actual Lot Quantity

Hi Everybody,
A material has inspection type 01 active but the Post to insp stock is not checked in the QM view of material master. User did three GRs of quantity 10 each for a batch BAT1. So now the actual lot quantity becomes 30.
When the user did the 3rd GR, he noticed that the GR was not to be done. So he cancelled the material document and reversed the document via movement type 102.
After this he did 2 GRs of quantity 5 each. So now the actual lot quantity of the inspection lot should be 101010-10(for the reversed document)55 = 30.
After this, the user did result recording and UD. Now the inspection lot quantity shown in the system is 40 instead of 30. The goods reversal did not had any effect on the actual lot quantity. The stock is perfectly OK and in MMBE the system shows a quantity of 30 only. The problem is only with actual lot quantity.
I have two questions :
1. Why didnt the quantity 10 get subtracted from actual lot quantity ?
2. After the UD is done, is there any way to correct the actual lot quantity ?
Regards,
Manish.

HI Everybody,
Sorry for not giving clear information on this. The events took place in the following order :
1. Wrong GR done
2. Wrong GR reversed via movement 102
(As the batch is same, the quantity was updated in one single inspection lot)
3. Result recording and UD done
4. Copmplete stock issued to order
The GR was reversed before taking the UD but still the actual lot quantity didnt get corrected.
Regards,
Manish.

Restriction of Need by Date in Planner workbench release against blanket PO

Hi ,
Needed some information on this query below :
==================================================
For normal blanket PO, if the effective date is till 31-Jul-06 and if a release is done on this Blanket PO , with the need by date as ( example 02-Sep-06) , it still goes and does a release . There is no problem.
But in the planner workbench release, if the need by date is greater than the BPO effective date , it does not allow to release ...
Is this a constraint or any setup or any Profile blocking from doing this release ?
Thanks
Anil

Sandeep,
Thank yo for your information. Are you suggesting that we write an SQL report to identfy the POs which we want to update the PO Need By Date, then we utilize the Purchasing Documents Open Interface to update the PO Need By Date?
Or would there be another way to do it from the ASCP workbench?
We are talking about a few thousand POs ... so we need to automate.
Thanks,
Joe

'Resource Usage' field in Planner workbench

Hi,
Currently the 'Resource Usage' field in Planner Workbench > Item > Routing Operation > Resources doesn't not display decimal places.
What do I need to change in profile option or preference or anywhere else so that atleast 1 place after decimal is display. In the database column this field has data with decimal places.
Thanks

Hi Geert,
Thanks for the advice.
I put '1' decimal place in Capacity Plan but it didn't work. Then I entered same value in all decimal places in all tab in Preferences, then it worked.
Thanks
Dee

Inspection Lot quantity change (lot origin 03) when Prod. ord. qty changes?

Hi,
it seems that for an inspection lot, with lot origin 03:Production, its Inpsection Lot qty doesnt change when the Production order Total Quantity field changes. Only the Actual Inspection Lot changes.
How can the Inspection lot quantity field of the Inspection Lot be changed accordingly?
Should the enhancement PPCO0007 be used?and then LOSMENGE (table QALS) =GAMNG (table AFKO)
Can it be done?
Thanks in advance

Hi,
In that case, you can do it by :
- Reread the master data of production order(From Menu Bar).
- The status of production order will be converted from "Released" to "Created".
- Release the production order again.
Thanks
SUMIT

In process Inspection Lot Qty and Actual Lot quantity difference.

Hi Experts,
In case of In process Inspection
Scenario : 1. Production Order created, released but before saving the qty is changed.
2. Production Order created released and saved. Then qty is changed in Change Prod order txn.
These scenarios are causing a discrepancy in Inspection Lot Qty and Actual Lot quantity. Is there any method to avoid this ?
This can be made correct in Inspection lot by resetting the sample calculation. But once confirmation has started for Prodn Order (not necessarily QC operation) or RR has been done resetting is not possible.
Is this the std behavior ? Disallowing the resetting once RR done seems OK, but even if any of the operation in Prodn Order is confirmed it still give status error while resetting. Canceling all the confirmation all the way back also does not solve the problem.
Any suggestions ?
Regards
Joe

Hi
Although your suggestion is valid, it is not practical from user point of view.
Moving this thread to QM forum.
Rgds

ASCp - Planner Workbench, PO in receicing order type record

Dear Friends,
In ASCP, Planner Workbench ,under a plan, supply and ddemand screen has an order type "PO in receicving" with firm flag enabled with future date for due dates
We could see all the PO's for that item is closed. On hand Quantities also got increased based on that PO receipts.
Can you please let me know, what does that mean by "PO in receicving" order type record and how for a closed PO's it is being shown?
Thanks,
Ganesh

Hi Ganesh,
The closed PO's should not be there and shouldn't have PO in Receiving status either.
But the reason why you must be seeing this is because there is still a record in MTL_SUPPLY for this PO with supply type code as RECEIVING and hence its still
appearing in ASCP.
Please go by the below article if the supply is still shown in RECEIVING but PO's are completed and run the mentioned queries to diagnose and get the inventory transaction fixed.
Fully Received / Delivered / Finally Closed Po Line Still Appearing in Item Supply / Demand Form MS and RS (Doc ID 1364291.1)
Moreover, if you started seeing this issue more often then the best way is to put the piece of code in the collections hook i.e MSC_CL_CLEANSE API to purge the supplies from ODS if PO's are closed for those.
Thanks,
Abhishek Sharma
Please mark the post correct or helpful, if answered

How to adjust order quantity to match lot quantity

Hello everyone.
Is there any feature that adjust the ordered quantity to match sales/purchasing lot quantity automatically?
(OM or PO)
For example,
Item A's sales lot quantity is 10.
When customer ordered 3 Item A ( or User is ordering 3 Item A to the supplier )
I expect the sales/purchasing order quantity will be adjust 10 automatically.
Regards
Kei Machida

Hi Venkat,
You can up date the price or quantity in the billing document based on the delivered material batch quality parameters.
But for this you need to take ABAPer help.
I hope this will help you,
Regards,
Murali.

I need code to get Action Column in MPS Planner Workbench Supply form( R 12)

Hi All,
I need Code to get Action Column that available in Supply form of MPS Planner Workbench .
I need to have it in my report. we don't have Advanced Chain Installed.
Thank you.

Dear All,
Kindly Support...

Inspection Lot quantity unit is changing to Basic UOM.

Dear All,
In material master, material unit is in MTR(M),for that material i created Production order in NOS
I am confirming that order (TCODE -CO11N) in nos only ,up to last stage of confirmation it is in NOS only
but after confirmation the lot is generating in qa32 that lot quantity unit is basic unit of measure i.e MTR(M).
But i want that lot in confirmation unit i.e 'NOS' .
So,please suggest me to solve this problem.
Is there is any user exit to overcome on this problem.??
Regards,
Sanket.

Hi,
the UOM of QA32(inspection lot) is always similar to the UOM of MM03(material master).
Arunima

Expired Lot quantity incorrect in MRP Planner Workbench

Similar Messages

Maybe you are looking for