Explain plans for Iphone Please!

hello, my verizon contract is up in 2 months and i will probably switch to att for the iphone. i have 4 people in my family and am looking at getting 2 or 3 iphones. what plan should i get? and is the data plan 30$ per iphone or can you get a plan that is a flat fee for all iphones? Thanks in advance!

The calling and text plans available with AT&T Family Plans are the same regardless the phone.
AT&T's least expensive Family calling plan is $59.99/mo - this is for the first two lines.
This provides 550 anytime minutes shared with all lines - up to 5 lines. Mobile to mobile minutes anytime are unlimited, unlimited nights and weekends minutes, and rollover minutes are included.
Each additional line costs $9.99/mo
The unlimited data plan for the iPhone is per iPhone.
If you plan on getting two iPhones with a total of 4 lines - using the least expensive Family Plan will be as follows.
$59.99/mo - two lines (using the 2 iPhones for these two lines).
$30/mo - unlimited data plan for one iPhone
$30/mo - unlimited data plan for one iPhone
$9.99/mo - additional line
$9.99/mo - additional line
As a new AT&T subscriber, you can get a fully subsidized phone for the additional two lines.
$20/mo - unlimited SMS/MMS shared between all lines.
Choosing the least expensive Family Plan will cost you $160/mo which includes the $30/mo unlimited data plan for each iPhone (2), and unlimited SMS/MMS plus applicable taxes and fees.
https://www.wireless.att.com/olam/loginAction.olamexecute?goto=welcome

Similar Messages

  • How to find Explain Plan for a large querry which has multiple sub querries

    Hi All,
    I have a Package which has many procedures and one of the procedure has a cursor which is like 2000 lines. This cursor has a main select statement which again has many select statements in it.
    Now how do I do the explain plan for the main select statement?
    If it can be done easier way in toad(or SQLPLUS), please tell me...

    When your query takes too long ...

  • Explain plan for MVIEW....

    Hi All,
    please tell me how to invoke EXPLAIN PLAN for CREATE MATERIALIZED VIEW.
    while i am trying to get plan i am getting following error
    ORA-00900: invalid SQL statement
    Thanks in advance.

    Thanks for reply.
    I need it for estimation and solution design. so all
    parameters are necessary. second thing is DDL and
    simple SELECT statements plan are differ. I can get
    explain plan for CREATE TABLE AS SELECT but not for
    CREATE MV.
    Regards,
    Santosh.In case you didn't notice: Create table as select (CTAS) is also DDL.
    There is nothing additionally from point of the execution plan that is added by the CREATE MV command.

  • Explain plan for Query performance

    Hi Gurus,
    I need to improve the performance of a procedure. The procedure has the below QUery. I dont have Idea on how to imrpove the perf by seeing the explain plan. Can anyone please help me to explain where I need to change the code.
    The below are the code and Explain plan for the same.
    -----------Code----------------------------
    SELECT IV_STORECODE AS STORECODE,
                                   TO_CHAR(RD.ITEMCODE) AS ITEMCODE,
                                   C.ITEMCATEGORYNAME,
                                   ISUB.ITEMSUBCATEGORY1NAME
                              FROM RECEIPTS R
                             INNER JOIN RECEIPTDETAILS RD
                                ON R.RECEIPTID = RD.RECEIPTID
                             INNER JOIN ITEMCOMPANY IC
                                ON IC.ITEMCODE = RD.ITEMCODE
                             INNER JOIN ITEMCATEGORY C
                                ON IC.ITEMCATEGORY = C.ITEMCATEGORYID
                             LEFT OUTER JOIN ITEMSUBCATEGORY1 ISUB
                                ON ISUB.ITEMSUBCATEGORY1ID = IC.ITEMSUBCATEGORY1
                               AND ISUB.ITEMSUBCATEGORY1ID IN
                                   (SELECT ITEMSUBCATEGORY1ID
                                      FROM ITEMSUBCATEGORY1
                                     WHERE ITEMCATEGORYID = IV_ITEMCATEGORY)
                             INNER JOIN STORE SE
                                ON SE.STORECODE = R.STORECODE
                             WHERE R.STORECODE = IV_STORECODE
                               AND SE.HOSPITALID = IV_HOSPITALID
                               AND TRUNC(R.CREATEDDATE) BETWEEN V_FROMDATE AND
                                   V_TODATE
                               AND R.STATUSID NOT IN (99, 5)
                                  AND
                                   (IV_DRUGTYPE IS NULL OR
                                   IC.DRUGTYPECATEGORYID = IV_DRUGTYPE)
                            UNION
                            SELECT IV_STORECODE AS STORECODE,
                                   TO_CHAR(STD.ITEMCODE) AS ITEMCODE,
                                   C.ITEMCATEGORYNAME,
                                   ISUB.ITEMSUBCATEGORY1NAME
                              FROM STOCKTRANSACTION ST
                             INNER JOIN STOCKTRANSACTIONDETAILS STD
                                ON ST.STOCKTRANSACTIONID = STD.STOCKTRANSACTIONID
                             INNER JOIN ITEMCOMPANY IC
                                ON IC.ITEMCODE = STD.ITEMCODE
                             INNER JOIN ITEMCATEGORY C
                                ON IC.ITEMCATEGORY = C.ITEMCATEGORYID
                              LEFT OUTER JOIN ITEMSUBCATEGORY1 ISUB
                                ON ISUB.ITEMSUBCATEGORY1ID = IC.ITEMSUBCATEGORY1
                               AND ISUB.ITEMSUBCATEGORY1ID IN
                                   (SELECT ITEMSUBCATEGORY1ID
                                      FROM ITEMSUBCATEGORY1
                                     WHERE ITEMCATEGORYID = IV_ITEMCATEGORY)
                             INNER JOIN STORE SE
                                ON SE.STORECODE = ST.STORECODE
                             WHERE ST.STORECODE = IV_STORECODE
                               AND SE.HOSPITALID = IV_HOSPITALID
                               AND TRUNC(ST.CREATEDDATE) BETWEEN V_FROMDATE AND
                                   V_TODATE
                               AND ST.STATUS <> 99
                               AND STD.ITEMCODE NOT LIKE '%#%'
                               AND                   
                                   (IV_DRUGTYPE IS NULL OR
                                   IC.DRUGTYPECATEGORYID = IV_DRUGTYPE)
                            UNION
                            SELECT D.STORECODE,
                                   TO_CHAR(D.ITEMCODE) AS ITEMCODE,
                                   C.ITEMCATEGORYNAME,
                                   ISUB.ITEMSUBCATEGORY1NAME
                              FROM DAILYINVENTORY D
                             INNER JOIN ITEMCOMPANY IC
                                ON IC.ITEMCODE = D.ITEMCODE
                             INNER JOIN ITEMCATEGORY C
                                ON IC.ITEMCATEGORY = C.ITEMCATEGORYID
                              LEFT OUTER JOIN ITEMSUBCATEGORY1 ISUB
                                ON ISUB.ITEMSUBCATEGORY1ID = IC.ITEMSUBCATEGORY1
                               AND ISUB.ITEMSUBCATEGORY1ID IN
                                   (SELECT ITEMSUBCATEGORY1ID
                                      FROM ITEMSUBCATEGORY1
                                     WHERE ITEMCATEGORYID = IV_ITEMCATEGORY)
                             INNER JOIN STORE SE
                                ON SE.STORECODE = D.STORECODE
                             WHERE D.STORECODE = IV_STORECODE
                               AND SE.HOSPITALID = IV_HOSPITALID
                               AND TRUNC(D.UPDATEDDATE) <= V_TODATE
                               AND D.QTY > 0
                               AND D.ITEMCODE NOT LIKE '%#%'
                               AND C.ITEMCATEGORYID = IV_ITEMCATEGORY
                                  AND (IV_DRUGTYPE IS NULL OR
                                   IC.DRUGTYPECATEGORYID = IV_DRUGTYPE)
                               AND (IV_SUBITEMCATEGORY IS NULL OR
                                   ISUB.ITEMSUBCATEGORY1ID = IV_SUBITEMCATEGORY) Will post the explain plan ..
    Thanks in advance..

    Ensure you also include all the other information people will need to help you, e.g. database version, table structures/relationships and cardinalities, row counts etc.
    See the two threads linked to in the FAQ: {message:id=9360003}

  • Efficient way to read through big explain plan and genterate html explain plan for sql id's executed in past

    Hi,
    I have a sql which is recently having a performance problems in Production. I have generated a explain plan for it trying to find out what it is doing but plan itself is close to 1000 lines. I want to check if there is any efficient way to go through big plan like this one and quickly find the damaging areas..
    2) I also wanted to know if there is way to generate explain plans in HTML format which executed in past and have entry in dba_hist_sqltext.
    3) I also have two sql_monitor reports which I want to compare. is there any efficient way to do it as well?
    Please share your thoughts!
    Thanks in advance!
    Regards,
    Suman-

    Hi,
    I suggest you can try running sql advisor on the query maybe something fruitful comes up
    http://www.oracle-base.com/articles/11g/sql-access-advisor-11gr1.php
    I am not sure about the explain plan being printed in html format but
    You may also want to try the sqlhistory.sql query from below page
    http://evdbt.com/scripts/
    I have used it many times to check on executions and explain plans which may have changed over the period
    I have faced it many times , the query picks up a bad explain plan and performs poorly

  • Explain Plan for Multiple SQL

    Hi ,
    Our db version is Oracle 8i and looking for solution.
    I have multiple select sql statments and need to get the explain plan for all statments.
    Is it possible to take explain plan for all statments one time? If so please provide the steps.
    Thanks.
    Happy Halloween.

    Not sure exactly you are looking. But if you do
    set autotrace on
    from sqlplus and put all the query in a script, you should get all explain plan in one shot. You can spool the output to a file.

  • Hello! Which is best to choose a plan for IPhone country Russia?

    Which is best to choose a plan for IPhone country Russia?

    Aivaryamal wrote:
    What about this site to buy the iPhone, which works with MTS and Beeline? throw off the link, please?
    I do not know anything about MTS or Beeline - are they GSM carriers, do they offer LTE and if so, on what frequencies?
    The USA online store sells unlocked iPhones, which are model A1428 and is the same model phone as sold carrier-locked to AT&T here.  But again, you cannot buy anything from the USA online unless you have a USA billing address, USA-issued payment source (e.g. credit card) and have it shipped within the USA.  If you are in Russia, you need to buy from a site that sells in Russia, not from the USA online Apple Store.

  • How to change the explain plan for currently running query?

    Hi All,
    I am using Oracle enterprise 9i edition. I have a query which frames dynamically and running in the database. I noticed a table with 31147758 rows
    in the query which has no indexes and taking more time to process. I tried to create an INdex on that table. I know the query is already running with a FULL table scan. Is it possible to change the explain plan for the current running query to consider the INDEX?
    [code]
    SELECT /*+ USE_HASH (c,e,b,a) */
    d.att_fcc extrt_prod_dim_id,
    d.att_fcc compr_prod_dim_id,
      a.glbl_uniq_id glbl_uniq_id,
      to_date(c.dit_code,'RRRRMMDD')STRT_DT,
      (to_date(c.dit_code,'RRRRMMDD')+150)END_DT,
      a.pat_nbr pat_id,
      a.rxer_id       rxer_id,
      e.rxer_geog_id  rxer_geog_id,
      a.pharmy_id pharmy_id,
      a.pscr_pack_id pscr_pack_id,
      a.dspnsd_pack_id dspnsd_pack_id,
      DENSE_RANK () OVER (PARTITION BY a.pat_nbr ORDER BY c.dit_code) daterank,
      COUNT( DISTINCT d.att_fcc ) OVER (PARTITION BY a.pat_nbr, c.dit_code) event_cnt
      DENSE_RANK () OVER (PARTITION BY a.pat_nbr,
    d.att_fcc
      ORDER BY c.dit_code) prodrank,
      DENSE_RANK () OVER (PARTITION BY a.pat_nbr,
    d.att_fcc
      ORDER BY c.dit_code DESC) stoprank
      FROM
      pd_dimitems c,
       pd_pack_attribs   d ,
        lrx_tmp_rxer_geog e,
        lrx_tmp_pat_daterank p,
        lrx_tmp_valid_fact_link     a
        WHERE c.dit_id = a.tm_id
        AND   e.rxer_id = a.rxer_id
        AND   a.glbl_uniq_id = p.glbl_uniq_id
        AND   p.daterank > 1
      AND   a.pscr_pack_id = d.att_dit_id
    [/code]
    The table lrx_tmp_pat_daterank is having that 31147758 rows. So I am wondering how to make the query to use the newly created index on the table?

    Why do you think using Indexes will improve the performance of the query? How many rows this query is returning? Optimizer might chose a Full table scan when it finds out that Index plan might not be useful. Why are you using /*+ USE_HASH (c,e,b,a) */ hint? This Hint will force oracle to use Full table scan instead of using the index. Try removing it and see if the plan changes.
    Regards,

  • Explain Plan for Materialized Views in 10g

    I am verifying explain plan for few queries on 10g as compared to 9i I was wondering in Materialized Views queries MAT_VIEW ACCESS instead of TABLE ACCESS is it expected behaviour or am missing something?
    Couldn't find information in 10g documentation
    thanks in advance

    I've put together a query for the v$sql_plan in 9iR2.
    Depending on what you use, you can probably drop some columns (eg OTHER and partition columns) and you could drive it from the v$session by getting the hash_value from there for the sid you are interested in :
    (select * from v$sql_plan where hash_value =
    (select sql_hash_value from v$session where sid=:sid))
    select level, optimizer, lpad('_',1*(level-1),'_')||operation operation,
    options, object_owner||'.'||object_name obj_name, search_columns,
    ltrim(to_char(cardinality,'999,999,999')) no_rows,
    ltrim(to_char(bytes/1024,'999,999')) kbytes, cost tot_cost,
    object_node link, id, parent_id, other_tag||':'||other other,
    partition_start, partition_stop, cpu_cost, io_cost,
    access_predicates, filter_predicates,
    round(temp_space/(1024*1024),2) temp_space_mb
    from (select * from v$sql_plan where hash_value = :hash_val)
    start with id=0
    connect by prior id = parent_id and prior child_number = child_number
    order by child_number, id, position;

  • Explain plan for query with variables

    Trying to Explain plan for some sql in sql*plus. The query has a variable in it. How do I do this ?
    I did look into explain plan and dbms_xplan but could not find anything with variables

    use sqlplus bind variables:
    SQL> --define variable
    SQL> var x varchar2
    SQL> -- notice the colon prefixing the variable
    SQL> explain plan for select * from customer where cid = :x;
    Explained.
    SQL> select * from table( dbms_xplan.display );
    PLAN_TABLE_OUTPUT
    Plan hash value: 1709312366
    | Id  | Operation                   | Name     | Rows  | Bytes | Cost (%CPU)| Time     |
    |   0 | SELECT STATEMENT            |          |     1 |    67 |     2   (0)| 00:00:01 |
    |   1 |  TABLE ACCESS BY INDEX ROWID| CUSTOMER |     1 |    67 |     2   (0)| 00:00:01 |
    |*  2 |   INDEX RANGE SCAN          | CID      |     1 |       |     1   (0)| 00:00:01 |
    Predicate Information (identified by operation id):
       2 - access("CID"=:X)
    14 rows selected.the variable does not need to be set to explain the query, since explain does not actually execute.
    Edited by: shoblock on Nov 6, 2008 4:51 PM

  • Explain Plan for domain index

    I am running explain plan for queries using a domain index. i.e. an oracle text 'contains' clause. The usage of the domain index appears in the plan o.k, but I am interested in seeing the underlying access to the DR$...$I etc tables and assoicated indexes belonging to ctxsys. Is it possible to see this access ?
    Basically I have all the objects created by the domain index in their own tablespace using a storage preference, but I am wondering if the sub indexes should be moved out from the sub tables for better performance ? Any guidance is appreciated.

    I am running explain plan for queries using a domain index. i.e. an oracle text 'contains' clause. The usage of the domain index appears in the plan o.k, but I am interested in seeing the underlying access to the DR$...$I etc tables and assoicated indexes belonging to ctxsys. Is it possible to see this access ?
    Basically I have all the objects created by the domain index in their own tablespace using a storage preference, but I am wondering if the sub indexes should be moved out from the sub tables for better performance ? Any guidance is appreciated.

  • Explain plan for Procedures

    Hi,
    I know we can generate explain plan for queries using "Explain plan" statement or "Autotrace option". I would like to know how can we generate explain plan for oracle procedures.
    Thanks in Advance..

    Check this link very helpful info from Rob
    When your query takes too long ...
    There are no explain plan for procedures.
    MAy be you want to do DBMS_PROFILER for procedures execution

  • Why tkprof did not show explain plan for some sql statements

    Hi,
    I did a trace for one of the session, hoping to find the explain plan for its tkprof. However, I only get this:
    INSERT INTO AUDIT_TABLE
    VALUES
    ( :B1 , :B2 , :B3 , :B4 , :B5 , :B6 , :B8 , :B7 )
    call     count       cpu    elapsed       disk      query    current        rows
    Parse        1      0.00       0.00          0          0          0           0
    Execute   3698      8.08      59.41       3348        566      19092        3698
    Fetch        0      0.00       0.00          0          0          0           0
    total     3699      8.08      59.42       3348        566      19092        3698
    Misses in library cache during parse: 1
    Misses in library cache during execute: 1
    Optimizer mode: CHOOSE
    Parsing user id: 30     (recursive depth: 2)
    ********************************************************************************Any idea why the explain plan is missing?
    Also looking at the above statistics, what can I conclude?

    Thanks John. What's ur take on this statistics then?
    call     count       cpu    elapsed       disk      query    current        rows
    Parse        0      0.00       0.00          0          0          0           0
    Execute   1798     12.23      36.75       1758       5404       7418        1798
    Fetch        0      0.00       0.00          0          0          0           0
    total     1798     12.23      36.75       1758       5404       7418        1798
    Misses in library cache during parse: 0
    Optimizer mode: CHOOSE
    Parsing user id: 30     (recursive depth: 1)
    ********************************************************************************

  • Explain Plan for Procedure

    Hi,
    For getting the explain plan for a query, we use the statement
    "explain plan for " + Query
    Similarly, to get an explain plan for a procedure, do we have any way like
    "explain plan for " + "Execute " + Procedure
    How do we get an explain plan for a procedure that is executed
    Thanks in Advance.

    teckfreak wrote:
    Hi Robert,
    I am working on an utility application which will execute the procedure and show the explain plan to the user for him to analyze the explain plan and take necessary steps for optimization. I am showing the Procedure inputs to the user, allowing him to enter values and taking them and executing the procedure. I am setting the trace and extracting the explain plan for the procedure using TKPROF utility and showing it to the user.
    While doing so, the trace file is stored in udump folder. I am accessing the trace file from TKPROF utility. I am able to run the TKPROF from the command prompt. But if I try automating the TKPROF command in a .NET application using Process.Start, it says "Not able to access the file.". I tried giving full permissions to Everyone and it still throws the error. Kindly guide me how to proceed.. A different approach that you might want to consider (as indicated by William):
    - Flush the shared pool and use a unique MODULE description for each execution of your procedure (e.g. using DBMS_APPLICATION_INFO.SET_MODULE), e.g. using a logon trigger
    - Query V$SQL for your unique MODULE description and run DBMS_XPLAN.DISPLAY_CURSOR for each corresponding child cursor found (SQL_ID + CHILD_NUMBER) in the shared pool. This plan generation could be automated using a procedure
    The result of this approach corresponds to the tracing using TKPROF since it will provide the actual execution plans used at runtime rather than separate EXPLAIN PLAN results which might differ from the actual plans.
    This assumes that your shared pool is sufficiently large to hold all the child cursor created by your procedure without aging them out while the procedure is running. It's probably also only applicable to an environment where not too much work is being done while running this test and the recommended flushing of the shared pool.
    Regards,
    Randolf
    Oracle related stuff blog:
    http://oracle-randolf.blogspot.com/
    SQLTools++ for Oracle (Open source Oracle GUI for Windows):
    http://www.sqltools-plusplus.org:7676/
    http://sourceforge.net/projects/sqlt-pp/

  • Explain plan for running query

    Hi everyone,
    I come to know how to generate explain plan for a given query by giving
    Explain plan for select * fro emp;
    Consider a query running for 5 hrs in a session and i want to genrate explain plan for that current query in its 4th hour i dont know the sql as well
    all the steps by step would be much apppreciated
    like finding Current SQL then so on
    Thanks
    Shareef

    912856 wrote:
    Hi everyone,
    I come to know how to generate explain plan for a given query by giving
    Explain plan for select * fro emp;
    Consider a query running for 5 hrs in a session and i want to genrate explain plan for that current query in its 4th hour i dont know the sql as well
    all the steps by step would be much apppreciated
    like finding Current SQL then so on
    Thanks
    ShareefYOu can also use dbms_xplain to generate plan used in v$sql. like for example
    SQL>SELECT  SQL_ID,  CHILD_NUMBER FROM  V$SQL WHERE  SQL_TEXT LIKE 'select * from em%';
    SQL_ID        CHILD_NUMBER
    6kd5fkqdjb8fu            0
    SQL>SELECT  * FROM  TABLE(DBMS_XPLAN.DISPLAY_CURSOR('6kd5fkqdjb8fu',0,'ALLSTATS'));If you need the actual tuntime statistics used by sql statement then you need to put hint /*+ gather_plan_statistics */ in sql ststement, something like
    select /*+ gather_plan_statistics */ * from emp;
    and then generate the explain plan for this
    Have a look
    http://hoopercharles.wordpress.com/2010/03/01/dbms_xplan-format-parameters/
    select * from table(dbms_xplan.display_cursor(null,null,'ALLSTATS LAST'));

Maybe you are looking for