Explain the term 'If a quantity of goods received is not yet calculated'

Hi SAP Experts
I read the note: 212286-Overview note: Valuation during goods movements.
In the end, it reads
"Determination of credit posting to order during the goods receipt for production order During goods receipt for the production order, the value of goods movement is determined by the credit of the production order.
If a quantity of goods received is not yet calculated, credit posting
to order is calculated from plan credit.
If the quantity of goods received is already calculated, the order is credited for actual costs."
Please help to explain the sentence, thanks you.
If a quantity of goods received is not yet calculated, credit posting
to order is calculated from plan credit."
Regards
Mike

Thank Mukthar.
I know the logic for the production, but i don not think the sentence' if the quantity of goods received has not yet been calculated' is apply to the logic of production.
For example, 135103-GR for purchase order in foreign currency: Rounding, In the beginning, it also reads "The problem can occur if the quantity of goods received has not yet been calculated.".
It not only describe the production order, but also describe the purchase order. so i think it apple to one special situation.
Regards
Mike

Similar Messages

Goods received but not yet invoiced

Hi Experts,
I am using ME2N report with RECHNUNG selection parameter in order to see invoices to be posted.
My problem is that this selection parameter show also POs with no GR.
I need POs with IR<GR and also POs that does not require GR and IR<PO qty (and because of this the GR/IR reports like MR11 or MB5S are not good enough)
Can I modify this selection parameter somehow or create a new one in order to get this POs list?
Thanks
Ofer

Hi
Try this way
In ME2N
Goto Tool Bar - Edit - Dynamic selections - Select Puchasing Document item
In this select Goods Receipt, Invoice Recipt
Then enter X in that and execute
It will do.
Regards,
Raman

How to calculate Amount of goods received bill not received

Hi Gurus,
In my vendor aging report client require one filed which is amount of goods received bill not received (Goods received amount- Invoice amount)
can u please tell me what should i do?
Thanks in Advance
Kavita

Hi,
Actually i written a code in CMOD and enhanced the data source but the value is not proper......
something is missing ...can anyone explain
here is my code
when '0FI_AP_4'.
data wa_DTFIAP_3 type DTFIAP_3.
    loop at c_t_data into wa_dtfiap_3.
     select single ebeln lifnr from ekko into (it_ap03-ebeln,it_ap03-lifnr)
        where lifnr = wa_dtfiap_3-lifnr.
       it_ap03-budat = wa_dtfiap_3-budat.
       it_ap03-budat = wa_dtfiap_3-belnr.
      if sy-subrc = 0.
        append it_ap03.
       endif.
    endloop.
loop at it_ap03.
   select SINGLE mblnr from mkpf into mkpf-mblnr WHERE budat = it_ap03-budat and blart = 'WE' AND
     VGART = 'WE' .
     IF SY-subrc = 0.
     SELECT SUM( dmbtr ) from mseg into   it_ap03-dmbtr where mblnr = mkpf-mblnr and xauto = '' and
       bwart in ('101','102') and lifnr = it_ap03-lifnr .
   SELECT SINGLE ebeln matnr from mseg into (mseg-ebeln,mseg-matnr) where mblnr = mkpf-mblnr.
     select sum( dmbtr ) from ekbe into it_ap03-dmbtr1
     where ebeln = mseg-EBELN and vgabe = 2 and matnr = mseg-matnr and budat = it_ap03-budat.
     it_ap03-tamt = it_ap03-dmbtr - it_ap03-dmbtr1.
    ENDIF.
select sum( wrbtr ) from ekbe into it_ap03-dmbtr
where ebeln = it_ap03-EBELN and bewtp = 'E' and budat = it_ap03-budat.
select sum( wrbtr ) from ekbe into it_ap03-dmbtr1
where ebeln = it_ap03-EBELN and bewtp = 'Q' and budat = it_ap03-budat .
modify it_ap03.
clear it_ap03.
endloop.
loop at c_t_data into wa_dtfiap_3.
read table it_ap03 with key lifnr = wa_dtfiap_3-lifnr belnr = wa_dtfiap_3-belnr.
wa_dtfiap_3-zzbillamt = it_ap03-tamt.
modify c_t_data from wa_dtfiap_3.
endloop.
endcase.
Edited by: kavita on Sep 11, 2010 8:48 AM

Is GRNI (Goods Received but Not Inspetd) Report Available in Oracle Quality

Dear All,
Hope you all are doing well !!!
Is there any Oracle Standard Reports Available called GRNI (Goods Received but Not Inspected) in either Oracle Quality or Purchasing Module.
Please let me know either GRNI Reports Available or we can give other Reports which would suffice for the same.
Regards,
Aditya

Dear Aditya
To my knowledge, there is no such report and need to go for Customization. Hopefully what you asked is simple report which is possible to customize.
Regards
Raj

VBFA- outgoing goods ended but not yet invoiced report

Hi experts,
I need to create zreport that will show order number which outgoing goods ended but not yet invoiced,
ım trying to work with vbfa but ı still couldnt create logic flow for my report,
I really need some advice .
any help will be appreciate.
thanks

I believe an SD specialist should've given you a more detailed specification for this. What exactly is "outgoing goods ended" in SAP terms?
Google 'not invoiced report site:sap.com' and run similar searches going forward before posting. Please also make sure to post more specific questions. "Do my job" kinds of posts are frowned upon on SCN (see here).

Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off

I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off". I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
Can somebody advice.
Thanks

Can you please confirm me the following steps...
Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
Make sure your setting for that composite is not Off, keep inherit or production or development.
Thanks,
N

Can anyone tell me how to check the balance on an iTunes gift card that is not yet scratched?

Can anyone tell me how to check the balance on an iTunes gift card that is not yet scratched or activated?

If it's not printed on the card, then you'll need to check the receipt from the purchase of the card. There's no way to check the value from the card itself without redeeming it.
Regards.

Explain the terms of Revaluations,Goods Movements,Material Stocks.

Hi all,
I am technical consultant, need to under satnd the terms in Inventory Evaluation so please help me regarding the below things:
1. Please tell what is" Revaluations" process in Inventory & what is this effect on stock?
2. what is the Goods Movements & material Stock types ?
Please give me the above details.
Thanks,
Kiran Manyam

hi,
Revaluation:
When changing your plan data, you can revaluate the values using either a percentage increase or decrease. This enables you, for example, to base your plan values for 1999 on your actual values from 1998 plus 10%.
You can execute the revaluation when changing plan data automatically, and in interactive planning
Goods movement :
Its means nothing but the moving of goods for one may be from one storage loc to another , plant to plant, etc..
Inside it you will posting for :
1. sampling
2. scrapping
3. unrestricted to Blocked
2. unres. to Quality
etc..
Stock type:
There are three stock type:
1. Unrestricted ( valuated, can be plaanedvia mrp)
2. quality stock (valuated, can be planned(check once))
3. blocked stock(valuated, not able to plan via mrp)
Apart from all three therealso GR blocked which is non-valuated type
Matrial type:
Its define the type of material whther its UNBW non-stock matrial , roh , HALB etc...depending upon this only the quantity / value is unpated....as defined in the customization..
Regards
Priyanka.P
AWARD IF HELPFULL

After i updated to the new ios7 my ipad 3 stuck at the window with the terms. I push agree but it is not going on. Please help

After update to the new ios 7, during the restart my ipad 3 stuck at the window with the terms. I push agree but the window is still there. Please help. Thanks

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on anoterh computer to help determine if you have an iPod or computer problem.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Why im i failing to download stuff on the net its telling me "this apple id has not yet been used in the itunes store" where could i be going wrong?

failing to use my id because the apple id has not yet been used in the itunes store what could be the problem?

Hi reen uttie,
This prompt is usually displayed when your Apple ID needs to be configured for the iTunes Store. We'll need to run through the additional steps to setup your country, and payment information. See Step 10 and above on this resource (For iPhone, iPad, or iPod touch):
iTunes: How to set up an Apple ID within iTunes
http://support.apple.com/kb/HT2731
Tip: If you are trying to create an account using an existing Apple ID, like your iCloud email address, you will receive a prompt telling you that your email address is already an Apple ID. Simply tap Continue, and then tap Use Existing Account on the following screen.
- Next, you'll be required to enter your billing information. To choose a different Credit Card type, tap one of the available options, and then tap Done. You will not be charged until you make a purchase.
- Once you've filled out all of the fields for your billing information, tap Next.
For more information:
Using an existing Apple ID with the iTunes Store and Mac App Store
http://support.apple.com/kb/HT2589
Thanks,
Matt M.

While trying to upgrade to mavericks I received the following error during download "OS 10.9 has not yet been approved for software upgrade. Thanks! -SWN IT"

Hello, I am trying to upgrade an iMac to Mavericks. At the end of the download phase, a message pops up that says
"OS 10.9 has not yet been approved for software upgrade. Thanks! - SWN IT"
The download stops, and I cannot resume. Made several attempts to start the process of downloading again and receive the same message/error.
I am not familiar with any software that has the intials SWN or have SWN in the title.
Does this error look familiar to anyone?
Any clues as to how to find out the what application could be sending this message would be greatly apprciated.

Is this on a Mac that belongs to a company or did you buy it used?

How to restrict the GR for Production Order when Goods Issue is not done

Hi Gurus
How to restrict the GR for Production Order when all the required components for production order are not issued with all required quantity. Even for partial issue system should not allow GR with 101. The user status with RMWA, RMWF & CGFB is not working.
Pls suggest best solution.
Abhijit.

Hi,
You can club together the GI nad GR at the time of confirmation..
I.e Backflush for the components and auto GR for the Product.
So that you can stream line the Process.
The best Option would be to use the User Exit:
Enhancement - MBCF0002
Functional Module - EXIT_SAPMM07M_001
Include - ZXMBCU02
Refer below link for further details..
How to stop the goods receipt before issueing the goods for production orde
Regards,
Siva

I can't make calls. I try to call and it just stays at the "calling mobile" screen I can't receive calls either yet people can call me?

This has just recently happened to me i've experienced this once before but briefly and it went away, now I'm on vacation (still in Canada) I'm from Vancouver and i am in toronto, and this has now happened since I arrived off the airplan. I'm seriously unimpressed with this, I had the iPhone 3GS before this iPhone4s and never had any problems with it, what concerns me the most is that in case of an emergancy I have no way to call for help, so this needs to be solved and solved quickly, I'm asking this question publicly before I get rid of this phone and get a smart phone which would be bad since I buy gucci accessories and cases for my iPhone, so here is you're last chance to help me and convince me to stay with apple,
Also I forgot to mention that people can call me with no problem but when I answer I hear absolutely nothing, yet I've been told that they can hear me, my Internet works (obviously) and my texting works just not receiving calls or making outgoing calls.
Please respond here because I'm on vacation for another week and I cannot contact anyone via calls only via texts,
Some help would be greatly appreciated.
Thank You,
Alexander.

Hmm... both microphones are free from obstruction? The mic on top next to headphone jack and the the mic on the bottom...
Try restting as a new device and see if that corrects the issue... You must backup your data first.
iOS: How to back up your data and setup device as new
http://support.apple.com/kb/HT4137
This will rule out any possible software issue, possibly with the receiver of the phone....especially if the issue continues when you return to a known area where you have no issues. I would normally say try the speaker phone to see if they can hear you but it doesn't sound like you can even get that far. If the issue persists you may have a hardware issue and will likely have to take the phone in for service.

AR / invoice before Good Receivable how to handle

Hi Experts,
What is the best way to book an AR Invoice of goods which are not yet received in stock. And is it possible to connect the AR invoice to the Goods receivable after the stock is available in the Warehouse??
THX
Mark

Hi
What is the need of booking in System before receving the physicall stock,(its wrong practise also if ur entering without having the physicall stock.) for any info if u wana to maintain in system then make invoice and save it draft , so it will not store in the system that it will not effect the stock.
Explain ur full req.so it will be better to give suggestions..
Giri

Purchase order Goods received not invoiced.

Hi,
Is there any transaction ? where i can find Purchase order goods received and not invoiced.
Thanks..Gopi

Hi
Use transaqction ME2N , with selection paramter RECHNUNG & from the dynamic selection (Shift+F4) select the delivery completed indicator from the Purchase Order Item
Execute the report, this will give you the list of PO's open for invioicing after GR
Thanks & Regards
Kishore

Explain the term 'If a quantity of goods received is not yet calculated'

Similar Messages

Maybe you are looking for