Explain what is Data bolt-on
Can any one explain what is Data bolt-on?
It's an extra add-on to a cellular contract to provide a certain amount of cellular data.
Similar Messages
-
I was just having this problem until today. It is now all sorted and I can explain what to do very simply and easily.
I remembered the answers to my questions, I just forgot "EXACTLY" how I entered the text - so I had to have them reset. The easiest way is to sign in through www.appleid.com. Then on the right click the "Manage your Account" link and sign in. Easy so far right. Then, as others have said, look on the left of the screen you will see a link called "Password and Security" - click on this. Now this is where the confusion begins. Some people have a link located directly under the existing questions that looks like this "Forgot your answers? Send reset security info email to blah blah blah email . If you see this click it and it will send an email to the "Rescue Email" address that you entered when you originally entered your answers. Follow the instructions contained in this email and you are done. If you cannot remember this email address or you have since closed it, you will need to go to the Itunes Express lane and send an email to Apple requesting them to reset your answers.
HOWEVER IF YOU DO NOT SEE A THIS LINK UNDER THE QUESTIONS - this means that you DID NOT enter a Rescue email address when you originally set your questions. The only way you can now reset your Security Questions and Answers is to go to the Itunes Express lane and email Apple asking to have these reset. I have 2 apple accounts, one for myself and one for my daughter - as I did not include a rescue email I had to email apple. On both occasions, these questions were reset and an email sent to me exactly 24 hours after I sent them the request. I entered the new details, WROTE THEM DOWN EXACTLY AS I ENTERED THEM THIS TIME, entered a Rescue Email this time and I am good to go again. Simple. Now when I log in and click on "Password and Security" I do have the reset link visable. Apple support are good, they just take a bit of time to get things done, but they always seem to get there in the end. I just wish someone had taken the time to explain this somewhere else in the forum as it would have saved me much time and angst.
To get to the Itunes Express Lane go to this website www.appleid.com make sure the correct country is displayed top right, if not change it. Once this is saved go to the tabs at the top of the screen and click Support. Then halfway down the next page you will see a photo of two random people with a title of Contact Apple Support - Click this. Scroll down until you see the itunes logo, to the right of this you will see the link Express Lane for iTunes Player and iTunes Store - click on this. One the right hand side of the next page click on the link "itunes Store". On the next page click the link "Account Management" check the radio button beside "itunes store account security", select your country from the drop down box and click "Continue". Under the heading MORE OPTIONS, you will see a clickable link called email - click this. Fill in your name, Apple ID and country. Then in the text box, write "I have forgotten the answers to my Security questions, would you kindly please reset them. Thank-You". Then Click Continue, you will be given a reference number and an email is sent to your address advising that generally someone will attend to your request within 24 hours. Like I said previously, I had to do this twice and both times it was reset however it was done within about 5 minutes of the 24 hour cut off, so you will have to be patient. I know 100% that this works for Australia - I am guessing other countries should be similar. Hope this helps someone somewhere!Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue. -
Could someone please explain what P to P and Order to Cash cycle?
Could someone please explain what Procurement to Pay and Order to Cash cycles mean? Thanks.
Hi,
Pl.visit following links for P2P cycle.
http://erpschools.com/articles/procure-to-pay-cycle#13480480234441&79412::resize_frame
http://oracleapplicationsfunctional.blogspot.in/2011/08/procure-to-pay-p2p-cycle-in-purchasing.html
http://www.shareoracleapps.com/2010/05/procure-to-pay-cycle-in-oracle-apps-r12.html
and visit following links for O2C cycle.
http://erpschools.com/articles/order-to-cash-cycle#13480481951911&21367::resize_frame
http://www.youtube.com/watch?v=2GhAbWGz7iA
http://knoworacle.wordpress.com/2008/12/08/data-flow-for-11i-order-to-cash-cycle/
http://oracleapps88.blogspot.in/2012/08/order-to-cash-cycle.html
http://www.slideshare.net/anand5538/order-to-cash-cycle-9647606
HTH
Sanjay -
What is Data source? How to create a datasource?
Hi All,
anybody could you explain me What is Data source and how to create data source?
How it is related to BW.
Points will be rewarded for all the useful answers.
Priya.Hi Priya,
You can Create DataSource for Different Source systems.
Chech these URLs.
http://help.sap.com/saphelp_nw04s/helpdata/en/43/01ed2fe3811a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/00153831035167e10000000a1553f6/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/42/fdccb72aa95277e10000000a1553f7/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/93dbdbff0b274ee10000000a422035/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/03b1f4dc636e72e10000000a422035/content.htm
steps in 'how to delta generic datasource'
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
/message/3471234#3471234 [original link is broken]
Re: How to create datasource
<b>Reward points for helpful answers</b>
Satish -
HI Experts,
Please explain abt:
1) What is Data Mapping
2) Some senarios like, SAP Data map with BW Data
3) Which case Data mapping Error while load occur & how to rectify it.
Ponits awarded. Thanks,
RR.Hi,
For Mpping pls check the links......
For Source System Mapping
Re: Source System Mapping
Re: Source System Mapping
For " Settings for BI Statistics"
http://help.sap.com/saphelp_nw04s/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/webinar?rid=/library/uuid/d09864c5-0bb0-2910-8e8a-a306a886dcd9
http://help.sap.com/saphelp_nw70/helpdata/en/46/f9bd5b0d40537de10000000a1553f6/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5401ab90-0201-0010-b394-99ffdb15235b
/message/5117472#5117472 [original link is broken]
/message/4978537#4978537 [original link is broken]
Hope it is helps you.
Thanks & Regards,
santo -
What is Data Abstraction ?
what is data abstraction?
please dont explain definition from books
any thing that can be shown in program and just indicate that this is data abstraction and its advantageskirn291 wrote:
what is data abstraction?
please dont explain definition from books
any thing that can be shown in program and just indicate that this is data abstraction and its advantagesIn short, when you encapsulate something you get an inside and an outside. The outside is called the data abstraction and the inside is called information hiding.
Data abstraction is often called type. In Java everything you can do with a specific class, interface or enum is the type of that class, interface or enum. So the type (or data abstraction) defines what can be done, not how it's accomplished. How it's accomplished is hidden from view. It's an implementation detail (or information hiding). -
Bluetooth: can someone explain what you can do with it?
On the iPhone, is bluetooth only for pairing with a BT headset? no data transferring/receiving whatsoever with a powerbook? if so, has Apple gone mad?
thanksIt is easier to explain what it cannot do.
• it does not support OBEX file exchanges
• it does not support DUN connections via Bluetooth to connect your computer through it to the internet
• it does not synchronize contact, events or media files
Support for synchronization and file transfer it available only via USB through iTunes 7.3 or later. -
Hi friends, pls explain What is DB lookups in xi
1)pls explain What is DB lookups in xi. how many types ?
Hi,
How to Perform DBLook-ups from XI Utilizing J2EE JDBC:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9aedca11-0d01-0010-3b90-9ea04182875f
XI lookups : When you want some data from R3 or DB into mapping , then you need to use some kind of user exit like Lookup, it will stop the execution process and goto respective database and get the data and back to mapping , this kind of machanism.
We will use DB lookups for any other database like DB,Oracle,SQL, MS Access..etc.
We will use RFC lookup for SAP R3 .
See thebelow links
DB lookup - /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
SOAP Lookup - /people/bhavesh.kantilal/blog/2006/11/20/webservice-calls-from-a-user-defined-function
Lookup - /people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
Also read thru this to get more idea on lookups - http://help.sap.com/saphelp_nw04/helpdata/en/cf/406642ea59c753e10000000a1550b0
Lookups in XI made simpler - /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
How to check JDBC SQL Query Syntax and verify the query results inside a User Defined Function of the Lookup API -
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
/people/prasad.illapani/blog/2006/10/25/how-to-check-jdbc-sql-query-syntax-and-verify-the-query-results-inside-a-user-defined-function-of-the-lookup-api
Lookups - /people/morten.wittrock/blog/2006/03/30/wrapping-your-mapping-lookup-api-code-in-easy-to-use-java-classes
Lookups - /people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
http://help.sap.com/saphelp_nw04/helpdata/en/cf/406642ea59c753e10000000a1550b0/content.htm
/people/sap.user72/blog/2005/12/06/optimizing-lookups-in-xi
Lookups with XSLT - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8e7daa90-0201-0010-9499-cd347ffbbf72
/people/sravya.talanki2/blog
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14
How we have to create the lookups?
Check this weblogs with some screenshots on how to achieve this:
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
/people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
/people/sap.user72/blog/2005/12/06/optimizing-lookups-in-xi
/people/morten.wittrock/blog/2006/03/30/wrapping-your-mapping-lookup-api-code-in-easy-to-use-java-classes
Regards,
Priyanka. -
Please explain what are form groups and form routines
Hello ABAP Experts,
Could you please explain what are form groups and form routines? I would certainly appreciate some examples.
Thank you in advance, AleksandraHi,
I've found the Form Group in transaction J7LE. It is part of Industry Specific solution for hi tech companies, so I'm not sure if you'll be able to access it. In this tcode you define master data of your partner. The first step is to choose the Form Group - they simply group Form Routines. Depending on which one I choose, different entry fields get activated. However there are routines that will enable input to the same fields, so I suppose there must be some additional functionality behind it. Could you please specify what does it mean?
>>Form ROUTINES, are subroutines for modularizing your code<<
I'm afraid I have no ABAP experience at all...
Cheers, A. -
Please explain what are the various procedures to find user-eixts
Hi,
Please explain what are the various procedures to find user-eixts ?
RamanaHi,
1. By executing this Program.
*& Report ZFIND_EXIT
REPORT ZFIND_EXIT.
*report zbadi_find .
tables : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode,
p_pgmna like tstc-pgmna .
data wa_tadir type tadir.
start-of-selection.
if not p_tcode is initial.
select single * from tstc where tcode eq p_tcode.
elseif not p_pgmna is initial.
tstc-pgmna = p_pgmna.
endif.
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object in ('SMOD', 'SXSD')
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(105) sy-uline.
format color col_heading intensified on.
Sorting the internal Table
sort jtab by object.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type c.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
loop at jtab into wa_tadir.
at first.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
write:/(105) sy-uline.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
format color col_group intensified on.
write:/1 sy-vline,
2 wf_object2,
105 sy-vline.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
select single modtext into wf_txt
from modsapt
where sprsl = sy-langu
and name = wa_tadir-obj_name.
format color col_normal intensified off.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single text into wf_txt
from sxs_attrt
where sprsl = sy-langu
and exit_name = wa_tadir-obj_name.
format color col_normal intensified on.
endcase.
write:/1 sy-vline,
2 wa_tadir-obj_name hotspot on,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
at end of object.
write : /(105) sy-uline.
endat.
endloop.
write:/(105) sy-uline.
skip.
format color col_total intensified on.
write:/ 'No.of Exits:' , wf_smod.
write:/ 'No.of BADis:' , wf_badi.
else.
format color col_negative intensified on.
write:/(105) 'No userexits or BADis exist'.
endif.
else.
format color col_negative intensified on.
write:/(105) 'Transaction does not exist'.
endif.
at line-selection.
data : wf_object type tadir-object.
clear wf_object.
get cursor field field1.
check field1(8) eq 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
when 'SXSD'.
set parameter id 'EXN' field sy-lisel+1(20).
call transaction 'SE18' and skip first screen.
endcase.
2. . Go to the screen>System>Status-->Program (Double
click this program. It will take you to the program.
2. Now, Goto-->Object Directory Entry.
3. Make a note the package name.
4. Now run the transactions SMOD, press F4 and enter the
above noted package, press enter.
5. It will display list of Exits.
6. Now go back to the initial screen SMOD.
7. Specify the exit name here and select the radio button
Components.
8. It will display four group boxes one for FM, second
for Fcodes, thrid for Screen areas and last for
includes.
9. Goto transaction CMOD, create a new project, and
click the button "Enhancement assignments" and
specify your enhancements that you got in SMOD.
10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
3. 1. in se11, goto table MODSAP
View table contents
in Type field, enter
'E' (for user exit / Function Exit)
OR 'S' (for screen exit)
4. Calling Customer- fucntion in Main Program
Thanks,
Anitha -
What is 'date range' in SAP CRM?
I am SAP CRM beginner. Also very new to SDN. Reading very basic documents.
While reading Marketing related document (Campaign Management), I have come accross a term called ' date range ' where I am really confused with -
what is - date range, pre-dip- post-dip, buying period........
& what is the use of the same.hi
date range specifies that in a particular transaction what is the validity of the transaction,for example LEAD<ACTIVITY etc are the transactions we have in CRM
as u said you saw it in campaing management,there date reange specifies the start date and end date opf the campaign
whenever we start a acmapaing after executing it we have some start date from where we got to see the results of the campaign,
you define an additional date range that has a specific meaning, for example, pre-dip or post-dip, you need to select the corresponding period type in this activity. This is used to trigger validation of the dates in the BW System.
You should define at least one buying pattern type in Customizing for Marketing Planning and Campaign Management under Basic Data -> Define Default Buying Pattern Types.
For Instance you can define that the buying period should start weeks before the promotion takes
place and that buying finishes weeks before the end of the promotion. You define the buying period
as a date range in Customizing and then you can enter the actual dates here. A buying pattern can
be defined for each combination of campaign type, buying pattern type and duration.
also technically if u know about date range in CRM
i would like to explain like this that
there is a thing "milestone"
this refers to the range of date from start to end
withinthe particular date that you mention inside the transaction u do the needed task like u create a new task and u do the buying and u generate invoice
in simple terminology we have date range which specifies the start of a particular task and there is always an end date at which this task has to end,so take this way
check out the date range in trade promotion (trade promotion is an alternate for the campaing in CRM)
http://help.sap.com/saphelp_crm60/helpdata/en/46/080afc50e05876e10000000a11466f/frameset.htm
hope it will help you
do revert back in case of any doubt
best regards
ashish -
WHAT IS DATE BANDLING WHAT IS FIELD CATLOG IN ALV
WHAT IS DATE BANDLING WHAT IS FIELD CATLOG IN ALV
Explain clearlyi guess u mean date "Handling"
What abt date handling? -
Could someone explain what is wrong with this refind expression?
Hi, could someone explain what is wrong with this refind expression
faultCode:Server.Processing faultString:'Unable to invoke CFC - Malformed regular expression "^[0-2][0-9][/][0-1][0-2][/][1-2][0-9]{3}+$".'
thanks^[0-2][0-9][/][0-1][0-2][/][1-2][0-9]{3}$ works,
thanks
dates 12/12/2007matching -
mac bought friday,says the SSD memory is already finished, full, for more or less 100 GB of "other" but doesn't explain what it is... help please!
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below on this page to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal. -
Could you plesae explain what is by-product ?
Hi Experts
could you plesae explain what is by-product ?
GlenHi Glen,
By-product is a secondary or incidental product deriving from a manufacturing process, a chemical reaction or a biochemical pathway, and is not the primary product or service being produced. A by-product can be useful and marketable, or it can have negative ecological impact.
If it is a negative ecological impact, the term scrap is applied.
In SAP B1, there is no by-product term. if you want that the item is a by-product, you could possible use UDF in the item master data.
Rgds,
Maybe you are looking for
-
I got my mac pro in the middle of August. School started the week after. Internet was working perfectly fine at home. But at school, I never had a good connection. Sometimes on the good days I get a connection when I'm sitting at the exact spot in cl
-
ICal no longer syncing between phone and MBP
my macbook pro and motorola razr are no longer syncing with my ical...during the sync it says it is syncing it but nothing i add to ical is getting to the phone. address book is syncing normally (or as normal as the razr is capable of). any help appr
-
pretty new to java. How can I post an XML document to the server? I want to do some sort of HTTP Request from a managed bean. Can't find anything on this. Isn't there some sort of HTTP Request in the base Java libraries? General flow of what I'm atte
-
Photoshop Elements 8 Commercial Use Questions
I am planning to record a youtube video of me doing a "speedpaint" video as they're called by many on the internet where I will paint something using Photoshop Elements 8 and am wondering if it's ok to show Photoshop's User Interface in the video...
-
I used to be able to embed videos from YouTube but...
...it seems I no longer can. When I try to embed, it says "Firefox can't find file at..." and then it lists the embed code. I've used Firefox for 5 years and never before had this problem. It seems to only be happening with newer videos, not older on