Explicitly attaching the CMOD project to a my TRansport??

Hi Experts,
I created a CMOD project.
bcoz of some reason, its NOT attached to any transport........so, I need to attach EXPLICITLY this Project to a existing transport.
Actually, I tried, by going to CMOD to this project.......went to CHNAGE mode.......chnaged the simply description of the project...........by expecting that, system will ask me a transport, so that, that point I can assign a trabnsport..........but, system said that, its ALREADY ACTIVATED and did NOT asked me any transport!!!!!!!!!!!!
So, let me know that, How to attach it EXPLICITLY?
replies appreciated.
thanq

Hello,
You might try deactivating the project before making any changes. I tried this in our system and was prompted for a change request right away. Then make your changes and reactivate. Everything should then be recorded on a request.
If you are not prompted for a request when you deactivate the project it may be possible that the project is already attached to an existing request.
Regards
Greg Kern

Similar Messages

How to know the CMOD Project name, attached to exit?

Hello Experts,
The customer-function is implemeted (code is residing), so, i want to know the attached CMOD Project to this customer-function!! so, pls. let me know the way How can I find the corresponding CMOD Project?
thank you

cmodf4-shift+f7

Problem with the CMOD

Hi,
We newly upgraded the system to BI 7.0 version. We have created a new Project in CMOD. The code is for customizing the SAP defined standard message. The problem is that, when we execute the query in the front end the control is not coming to the ABAP code in the CMOD project (we used a Break point in the CMOD). Help us to proceed further.
Thanks
SMS.

Hi,
Do you have any customer exit variable in your query? Did that variable name is used in CMOD includes? If not, then control won't come inside CMOD at all.
Please go through this link, will explain about customer exit & I_STEP usage in detail.
http://help.sap.com/saphelp_nw70/helpdata/EN/1d/ca10d858c2e949ba4a152c44f8128a/frameset.htm
And you can get lot of customer exit info in SDN itself.
Regards,
Arun Thangaraj.

What is CMOD project for EXIT_SAPMV45A_003?

Hi GEms,
I am unable to find the underlying CMOD project for the enhancement in EXIT_SAPMV45A_003.
I need this because it seems that the project is not active as this is not getting triggered when i place a break point for the relevant conditions.
I had searched the table TADIR and manually went inti the CMODs individually.
Can some help me how do i find the CMOD project for this EXIT_SAPMV45A_003?
Thanks
Dan

Hi Eric,
I had done as you said i.e. i had created a cmod project and assigned V45A0003 and activated it.
Now what is the next step that i should do?
I see that there are 2 FM's under V45A0003 : EXIT_SAPMV45A_003 &
EXIT_SAPMV45A_004.
Can i omit EXIT_SAPMV45A_004 from the inclusion.
Pls suggest.
Thanks
Dan

I can't attach the JSF 1.2_04 sources to Eclipse project !

Hello,
I am using Eclipse 3.3.2. I am trying to build a ICEFaces project and I need the JSF sources for convinience.
I have them, I am trying to attach them with Project>Properties>JavaBuildPath>Sun JSF RI 1.2_04>jsf-api 1.2> Source Attachment> Edit>External file.
It's OK, but when I close the window and reopen it > there are no sources checked again.
I have downloaded them from here : https://javaserverfaces.dev.java.net/download.html
Please, help !

[This is indeed a bug in Eclipse|https://bugs.eclipse.org/bugs/buglist.cgi?quicksearch=attach+source]. As far the only workaround is to add a new JRE via Window > Preferences > Java > Installed JREs and adding the desired JAR's as external JAR's, saving it and opening it again (!!) and finally attach the sources to the added JAR's. Then in the project properties choose the new JRE (and keep the same JSF JAR's in the web-inf/lib!).
Yes it is cumbersome, but I suppose that this will be fixed in the next Eclipse release.

How to attaching the documents to WBS element in projects .

Hi Friends,
Can any one explain me how to attaching the documents in project WBS element. We have u201CDMSu201D server. But I donu2019t know the process. Please explain me step by step the entire process of attaching documents to WBS elements in project.
Regards,
Hari Krishan

Hi...
Im adding to Expert..Venkats reply.
Plz see this link
http://help.sap.com/saphelp_45b/helpdata/en/95/5fdf348840ee64e10000009b38f83b/frameset.htm
Regards
Chandra

PP 2014 8.1.0 When I "Save As" my project, quit and close, the new project freezes on launching

iMac (Retina 5K, 27-inch, Late 2014)
4 GHz Intel Core i7
32 GB 1600 MHz DDR3
AMD Radeon R9 M295X 4096 MB
Mac OS Yosemite 10.10.1 (14B25)
PP 2014 8.1.0
Blackmagic 4K media working in 4K sequences.
In my current project, I've been experiencing very strange crashes upon launching PP. Before ending my work for the day, I usually save my current project manually, and then do a "Save As" with tomorrow's date at the end, (projectname_2014-12-02) so I have a fresh copy to begin the next day and still have yesterday's as a backup. I then quit PP as normal. No issues. In other words, it closes just fine without any crashing or odd behavior.
In the last week, a rather annoying issue has presented itself. Once in a while, that new project that I created with Save As, will not open. I opens to the point when I can see my bins and my timeline, but as I would expect it to begin propagating the timeline with media, I get the spinning beach ball. I can wait for hours, and the project never loads. I can go back to yesterdays project and open it just fine, but any project saved with Save As, very often seems to be corrupted.
Except, that I can open it up fine on another machine. So it's not really corrupted. And it doesn't happen every time. Just most of the time in the last week or two.
I've done the following troubleshooting several times. Restarted the computer. Repair disk permissions. Launch PP with the option key to clear preferences. Cleaned the media database. Tried launching the project with all media offline. Uninstalled and reinstalled PP. Booted from USB OS install drive and repaired permissions, repaired HD, and even reinstalled the OS (not a clean install, just over the top of the previous one).
Once a Save As project won't open, it's done and I have to go back to yesterday's project.
Now here's where it gets really weird. If I create a new project, and import one of the "won't open" projects, not just a sequence, but the whole project, it's fine. Which of course isn't entirely surprising.
What *is* surprising is that after I save and close that new project with the old imported project in it, I can now go back and open all of the projects that would freeze on opening just minutes earlier.
Everything is right as rain again. I'm glad I have a work around, but it's a little unnerving and random, not to mention time lost troubleshooting this bizarre one.
Anyone else had any weird issues like this? Thanks for any thoughts.

Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail

Can two users work on different files of the same project?

Sorry if this has been asked already...but can two users work
on different files of the same project? How would that work? Would
it work something like this?
1. From RoboHelp 7, user A checks out the entire project.
2. User A checks in the files they are not working with.
3. User B checks out the project but can only 'edit' the
files that have been checked in by user A.
Is this how the source control works?

That's the basic idea. User A doesn't actually have to check
out the whole project, though. RSC will selectively check out only
the files that are actually getting changed. Both writers will have
a complete copy of the project on their local machines, but the
files are read-only until they are literally checked out, which is
on an as-needed basis unless the writer explicitly checks them out.
G

Undebuggable crash launching from Cortana (or - how can I attach the debugger to my about-to-crash phone app?)

Hello,
I integrated voice activation for my WP8.1 universal app, however it doesn't appear to be possible to debug the case when starting the app afresh via Cortana with speech terms.
There are three main speech startup cases I've played with:
1) App is suspended - can be seen in multitasking list by holding down back button, go to Cortana "myapp do something" - reactivates the app, calls App.OnActivated. Works fine.
2) App has been terminated - not in the multitasking list. Go to Cortana "start myapp" - starts the app like it was launched from the app list, calls App.OnLaunched but not
OnActivated. Works fine.
3) App has been terminated - not in the multitasking list. Go to Cortana "myapp do something" - starts the app, comes through to App.OnActivate but the app hangs for a few seconds on
the splash screen and crashes (device and emulator).
I want to catch the 3) case in the debugger, but cannot find a way to attach the debugger to my running package in the time window between activation and crashing. I think something is happening
deep in xaml land, but it's become impossible to instrument. I'm actually at the point now where it doesn't do anything in the OnActivate handler at all... no page navigation happens in the app but it still crashes.
I have a debug dump showing what appears to be a divide-by-zero exception but I can't seem to debug it in VS2013 as it complains about skipping loading symbols for NGen'd exe and "The exception
thread has exited or the dump contains invalid thread information".
I cannot seem to find any information on how to effectively debug this scenario - it seems an important one for Cortana integration.
Basic repro:
In VS2013, create a new universal Hub app and editing the Windows Phone project:
Add Microphone capability in app manifest
Change the Display Name in the app manifest to something sayable.
Add in the most trivial speech activation capability using the VoiceCommandManager in App.OnLaunched with a very basic speech file.
Run once from the debugger to ensure everything is set up ok and voice command file is installed.
Kill from the debugger to make sure the app is terminated.
Hold down phone/emulator search button.
Say the phrase to start your app (in my case "CortanaCrashTest test something").
Cortana recognises the phrase and says it's going to start your app... app starts...
Sits on app splash screen, hang and crash.
Here are my code modifications:
Right at the top of App.OnLaunched:
#if WINDOWS_PHONE_APP
var storageFile = await Windows.Storage.StorageFile.GetFileFromApplicationUriAsync(new Uri("ms-appx:///Speech.xml"));
await Windows.Media.SpeechRecognition.VoiceCommandManager.InstallCommandSetsFromStorageFileAsync(storageFile);
#endif
Speech.xml (added to project as content):
<?xml version="1.0" encoding="utf-8" ?>
<VoiceCommands xmlns="http://schemas.microsoft.com/voicecommands/1.1">
<CommandSet xml:lang="en-us" Name="test">
<Example>test stuff</Example>
<Command Name="test">
<Example>test stuff</Example>
<ListenFor>test {*}</ListenFor>
<Feedback>test...</Feedback>
<Navigate/>
</Command>
</CommandSet>
</VoiceCommands>
Thanks,
Will.

Hello,
I had the same problem and solved it.
This issue occurred because OnLaunched method is not called when the App is activated.
You have to copy some code from OnLaunched method in order to correct your problem.
OnActivated method must start with this code to correct your issue :
protected override void OnActivated(IActivatedEventArgs args)
Frame rootFrame = Window.Current.Content as Frame;
if (rootFrame == null)
rootFrame = new Frame();
rootFrame.CacheSize = 1;
Window.Current.Content = rootFrame;
rootFrame.Navigate(typeof(YourMainPage));
Window.Current.Activate();
// Your code here
Regards

Exit Fm is not to CMOD project but transported to test system

Hi.
I have a enhancement MWMIDO08 with contains function module EXIT_SAPLLMDE_002 and which incldes program ZXLIDU10.
I made my necessary changes in the include program and transported to test system, without creating any CMOD project.
But my changes are working fine in test test.
Can you please suggest me, what to do now? if i want create a CMOD project now and add the function exit into it. and resend the new request to test system.
Does it create any problem.

This sort of thing can happen if someone has assigned a CMOD project to the enhancement containing the user exit before.
First check in SE16, table MODACT with MODACT-MEMBER = 'MWMIDO08', then MODACT-NAME will give you the existing project that is already assigned to enhancement MWMIDO08
If there is no entry in MODACT then you can safely create another project and assign the enhancement to it, activate and transport.
If already there is an entry in MODACT, you need to check if the same entry exists in your QA and Prod systems, to verify if someone already transported it. If it is not transported you need to deactivate / activate the project and transport that project again.
No this should not cause any problem and I can tell from experience having done same thing before.
Best regards,
Vishnu Tallapragada

Where are Cost Codes attached to a Project Number in Financials?

Where are Cost Codes attached to a Project Number in Financials?
Don't know where to start looking in the documentation..
I need to know where I can add GL Cost Codes to a particular Project number for our testing of i-Expenses.
anybody know?
many thanks,
Steven

Well, not sure what you mean by "cost codes". Normally when I see that wording I think of work breakdowns within a project. I don't think of cost codes as being general ledger numbers. But maybe you are meaning to say general ledger number? I see "Project Number" though, which makes me think you are talking about project accounting. You set up your projects in project accounting and create what Oracle calls Tasks (I like to them of them as cost codes) that you can assign to your projects. So this would all be in Project Accounting. You may want to download the various user guides for Oracle Projects to start learning about this application. You must be running project accounting, correct? So maybe you need to find the person in your company who knows this application and start to get educated on it. There is a separate forum for Projects where this may be a better place to ask this question. You may need to provide more detail on what you are trying to do if you are not involved with project accounting.
John Dickey

How to add new Attachment category in Projects master creation form

Hi Dudes,
I would like to know that how to add new Attachment category in Projects master creation form.
It defaults as Miscellaneous.
I created new category by navigated Application developer - attachment - category
but i dont know how to assign the above created category for Project master creation form
Can you pls throw some lights into this little dark room?

See http://docs.oracle.com/cd/E18727_01/doc.121/e12897/T302934T458262.htm
Scrool down to the "Category Assignments Window".
This is where you assign an attachment category to your form/function.
See http://erpschools.com/articles/oracle-attachment-functionality-adding-an-attachment-to-a-form for step-by-step screenshots.
Sandeep Gandhi

Getting Error of SqlBuildTask fail while building the database project

Hi Experts,
I am getting error while building the database project in following manner please help on this.
Error 803 04018: The "SqlBuildTask" task failed unexpectedly.
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.Data.Tools.Schema.UserInteractionServices.GetElementName(IModelElement element, ElementNameDetails details)
at Microsoft.Data.Tools.Schema.Sql.SqlUserInteractionServices.GetElementName(IModelElement element, ElementNameDetails details)
at Microsoft.Data.Tools.Schema.Sql.Sql110UserInteractionServices.GetElementName(IModelElement element, ElementNameDetails details)
at Microsoft.Data.Tools.Schema.Sql.Validation.MismatchedNameRule.Analyze(SqlSchemaModel sqlSchemaModel, ISqlModelElement sqlElement, SqlRuleSetting ruleSetting, SqlRuleExecutionContext context)
at Microsoft.Data.Tools.Schema.Sql.Validation.SqlValidationRuleProxy.Analyze(SqlSchemaModel sqlSchemaModel, ISqlModelElement sqlModelElement, SqlRuleSetting ruleSetting, SqlRuleExecutionContext context)
at Microsoft.Data.Tools.Schema.Sql.Validation.SqlValidationRule.Analyze(SqlRuleSetting ruleSetting, SqlRuleExecutionContext context)
at Microsoft.Data.Tools.Schema.Sql.RuleEngine.SqlRuleEngine.ExecuteRuleImpl(SqlRuleSetting ruleSetting, SqlRuleExecutionContext context, Predicate`1 suppressProblem, IEnumerable`1& errors)
at Microsoft.Data.Tools.Schema.Sql.RuleEngine.SqlRuleEngine.ExecuteRules(SqlSchemaModel dataSchemaModel, IEnumerable`1 ruleSettings, IEnumerable`1& errors, Predicate`1 suppressProblem, Func`1 executeCanceled)
at Microsoft.Data.Tools.Schema.Sql.RuleEngine.SqlRuleEngine.ExecuteRules(SqlSchemaModel dataSchemaModel, IEnumerable`1 rules, IEnumerable`1& errors, Predicate`1 suppressProblem, Func`1 executeCanceled)
at Microsoft.Data.Tools.Schema.Sql.Build.SqlTaskHost.RunBuildValidation(SqlSchemaModel model, ErrorManager errorContainer, Func`1 buildCanceledQuery, HashSet`1 includedRuleIDs, HashSet`1 excludedRuleIDs)
at Microsoft.Data.Tools.Schema.Sql.Build.SqlTaskHost.OnRunBuildValidations(ErrorManager errorManager, HashSet`1 includedRuleIds)
at Microsoft.Data.Tools.Schema.Sql.Build.SqlTaskHost.RunBuildValidations(ErrorManager errorManager, HashSet`1 includedRuleIDs)
at Microsoft.Data.Tools.Schema.Tasks.Sql.TaskHostLoader.LoadImpl(ITaskHost providedHost, TaskLoggingHelper providedLogger, Boolean runAllBuildTimeValidationRules)
at Microsoft.Data.Tools.Schema.Tasks.Sql.TaskHostLoader.Load(ITaskHost providedHost, TaskLoggingHelper providedLogger, Boolean runAllBuildTimeValidationRules)
at Microsoft.Data.Tools.Schema.Tasks.Sql.SqlBuildTask.ExecuteLoadTaskHostStep()
at Microsoft.Data.Tools.Schema.Tasks.Sql.SqlBuildTask.ExecuteStep(Func`1 step)
at Microsoft.Data.Tools.Schema.Tasks.Sql.SqlBuildTask.Execute()
at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
at Microsoft.Build.BackEnd.TaskBuilder.<ExecuteInstantiatedTask>d__20.MoveNext() C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\SSDT\Microsoft.Data.Tools.Schema.SqlTasks.targets 547 5 ABC_DB
Niraj Sevalkar

Hi Niraj, does this happen for all projects or for one specific project? I'd love to understand if this is a specific bug or if it might be a setup issue.
If this issues is reproduceable on the latest SSDT bits, I'd suggest capturing the event log for what is going wrong and then opening a connect
bug for this issue at https://connect.microsoft.com/SQLServer/feedback/CreateFeedback.aspx and
use the category "Developer Tools(SSDT, BIDS, etc.)". We're trying to track all bugs through connect so that you can tell when we have fixed the issue and we can request
more information. Please include the event log (instructions on this below) plus any other useful information you can provide, such as an example of exact steps to reproduce the problem.
Gathering an Event Log for SSDT
For diagnostic purposes we would like you to gather an event log for the issue that you are experiencing in SSDT. In order to gather a log and send it to a member of
the team, please follow the steps below.
Open a new command prompt as Administrator.
Run the following command
logman create trace -n DacFxDebug -p "Microsoft-SQLServerDataTools" 0x800 -o "%LOCALAPPDATA%\DacFxDebug.etl" -ets
logman create trace -n SSDTDebug -p "Microsoft-SQLServerDataToolsVS" 0x800 -o "%LOCALAPPDATA%\SSDTDebug.etl" -ets
Run whatever the target/issue scenario is in SSDT.
Go back to the command prompt and run the following commands
logman stop DacFxDebug -ets
logman stop SSDTDebug -ets
The resulting ETL files will be located at %LOCALAPPDATA%\SSDTDebug.etl & %LOCALAPPDATA%\DacFxDebug.etl and can be navigated to using Windows Explorer.
Please attach this file when creating the connect bug
NOTE - These logs will only be used by Microsoft product team members in order to better diagnose the problem you are experiencing
with SSDT and will not be shared elsewhere. If you want to make sure that there is no private information in your ETL file, the SSDTDebug.etl file can be opened and analyzed using the Windows Event Viewer.
To do this, open the Windows Event Viewer application. In the right-hand panel, select Open Saved Log. Navigate to the location where you saved the log, open, and review
the contents of the trace.
Thanks,
Kevin

Creating CMOD Project

Dear Experts,
I would like to enhance an standard Master Data Datasource with additional fields so Can you please let me know how can i create a new Project using the Enhancement RSAP0001 in the CMOD and Further Proceed from there.
Please provide me the Detail Steps
your help is much appriciated.
regards
Krishna Mohan

Hi,
Check this:----
http://wiki.sdn.sap.com/wiki/display/Snippets/FunctionModuleExit
Regards,
Suman

I m new to multisim, i need pcb layout of a cicuit. can anyone make it? i m attaching the circuit diagram.

I m new to multisim, i need pcb layout of a cicuit. can anyone make it? i m attaching the circuit diagram. plzzzzzz, its urgent. i have to submit the project in my college. plz try to make it single layer.
sad.hussain9136

Hello,
Multisim is not the right software for PCB layout design. That would be Ultiboard. With the integration between the 2 you can create your circuit in Multisim and transfer it to Ultiboard to easily design your one layer board. There are a lot of tutorials online that can help you do this. If you feel you need instruction, you can always book a class (online or on-site) to learn Multisim/Ultiboard.
Kind Regards,
Miguel V
National Instruments

Explicitly attaching the CMOD project to a my TRansport??

Similar Messages

Maybe you are looking for