Explode BOM button
Hello All,
In Purchase req, pur order for subcontracting there is a Explode BOM push button in material data tab page. My requirement is that when user will click on it, system should give a warning message that" Do you want to Reexplode BOM". How can I do this
not possible with standard settings, go for ABAP development
Similar Messages
-
Is it possible to selectively block re-explode BOM in Sub-contracting PO ?
In our business scenario, sometimes we are directly adding PO components in the Sub-contracting PO in addition to the existing components that have come in through BOM. After saving and somedays later when the user goes to edit PO through ME22N, since the components button & re-explode BOM button are very close, users by mistake press re-explode BOm and also save the PO. The directly added components go out and hence not consumed while GR. Is it possible to selectively block the re-explode BOM through PO user exit or any other method?
Some amount of user training should help.
If not discuss with your abaper if badi - ME_PROCESS_PO_CUST can be used or you can find user exits with a search using MM06E* -
Error in component quantity while exploding BOM
Hi
We are facing error while exploding BOM
i.e. the component quantity is 11.111 YD in cs03
but while exploring in CS13 we are getting component qty as 12 YD
Note : there is no rounding value maintained in the material master
waiting for your valuable response
Regards
BarlaHi Barla
Check the field "Roundoff" in transaction OS29, and maintainted it "1"
Regards -
Can we explode BOM without L as item category in ME21N
Dear all
Can we explode BOM without selecting the item category L in ME21N transaction?
Thank youHi,
What is the requirement for the same?
Regards,
Arpit -
How to explode BOM in vendor return delivery ?
I am working on creating item categories that will help explode BOM
But I have to do that for vendor return delivery
The BOM (structure A or B) settings are visible in item category for sales order but not for delivery item
So, how can I make an item category with BOM , for delivery (no sales order will be used) ?Hi,
J1IS is only to reverse exice duties which were captured earlier. in oder to cancel the excise you are using J1IS. However if you wich to pass the accounting entry for the same you ahve follows as below.
it will cancel the excise invoice .If u go to J1IS and cancel the document only the excise invoice created will be cancelled, no accounting entries will be generated. In order to capture accounting entries you have to fetch the accounting document of J1IS through table j_1iexcdtl and j_1ipart2, pass a reversal entry for the accounting document through FB08.
As per norms there is no possibility of reversal entry for CST as it will to material cost you have to pass the entry in FI.
Hope this helps you. -
Prod Order Type - do not explode bom
Hi Gurus,
Can we set a certain order type not to explode bom at order creation? Thanks for the advice!
Regards,
ManojI thnk you may create an alternative BOM which does not contain any components and select it for the order type, please go to customization OPL8, there is a field for BOM application for certain order type.
Then, go to customization Production > Basic Data > Bill of material > Aternative determination, there are 3 transactions for determining BOMs associate with BOM application (e.g. selection ID etc), please try if you can confirue them to have the system select the alternative BOM. -
Hi All,
I have created a sub contract PO. In the material data tab the 'Explode BOM' icon was not appearing. Only the 'Components icon' is appearing.
I have maintained the BOM correctly in CS01. Used item catergory as L.
Why is it so I am not getting the Explode BOM icon in PO?
Regards,
JagJagan,
You need to maintain the item category as 'L' in subcontracting PO too.
Then you will have explode BOM icon in item tab.
Hope this hels you.
SmanS
Edited by: SAP PP Consultant on May 6, 2009 1:49 PM -
Unable to explode BOM material
Hello PS Gurus,
I am unable to explode BOM material ( M) in CN22 for one network activity (A). The same material M can be exploded in same network but different activity (B)
Please throw some light in this
MMHello All,
Thanks for ur help.
I found out that date of the validity in CN22 made the issue.
Many thanks again.
Enjoy ur evening.
Thanks
MM -
BOM button in STO purchase order
Dear SAPERS,
We have a requirement from our client, that is
They need BOM explode button and Components button in STO Purchase order with Item Category U in Material master tab, just like in Subcontract Purchase Order Item category L.
Actually Those BOM and components buttons are it self are include programs which are executed based on Item category.
Please provide solution that how we can achieve this functionality for STO purchase orders.
Regards,
VenkatHI,
Thanks for your quick reply,
Actually our requirement is from Plant A some components are STO done to Plant B via Sales cycle, In plant B the components are converted to Finished Product and then soled to customer for plant B.
At time of PGI from Plant A to Plant B system will generate Sl. numbers for those components at the time PGI
So, We need the BOM concept in STO via BOM explode and Components button in STO PO, from this po bom system will get the list of components in PGI in sales.
Regards,
Venkat -
Setting for "Exploding BOM in Process order"
Hello All,
I have a requirement where I want to create BOM for sales order using CS61 and then I want to explode this BOM automatically in Process order(Production order) and it should happen automatically.Please let me know the settings for the same.
Regards,
RohitHi Subhro,
I thought you are talking about the BOM material for the ref technical object say functional location or equipment in the service order. If you have maintained the BOM for the equipment you can pull the all the component list in the component tab.
In the component tab click on the List button available in the component tab. You will see the list of BOM material.
DP -
Function Module to Explode BOM
Hi,
I need a function module to explode a BOM. The input for the funcion module is the material number and when I Execute, it should explode the BOM.
I found a couple of function modules, but my problem is I dont have a Sales Order Number, which is a Mandatory parameter for all these FMs.
So, could you please give a FM which explodes the BOM by taking the Material Number, Plant etc.
-PriyaPriya,
CS_BOM_EXPLOSION_MAT
CS_BOM_EXPL_MAT_V2
Also you can try searching CS* in transaction SE37.
Regards,
Prasobh -
Explode Bom in Purchase Order without Subcontracting
Hi Colleagues,
I have a sales BOM to represent a 'kitted item' (Lets say TV and TV stand) that are stocked as standard individual products.
These component level items are purchased from the same supplier
Is there a way of being able to raise a purchase order for the BOM header and then the PO explodes the component items and quantities? We are not using subcontracting, we simply want to be able to order the Kit header and then suggest the sub components that we can receive them seperately
Thanks
SteveHi,
In retail there's a similar functionality called structured article:
http://help.sap.com/saphelp_47x200/helpdata/en/2b/b03886df3611d1953b00a0c930e0da/frameset.htm
...but in standard SAP you have no such option - as per my best knowledge.
Generally, you get PurReqs during MRP run and you will create a PO from several individual PurReqs that belong to one vendor.
Other option is to copy the same PO (that already contains the components).
The BOM function in PO is for subcontracting exclusively as I know.
Regards,
Csaba -
Re-exploding BOM at conversion of planned order to production order
Hi, all.
I'd like to be able to specify that the planned orders I'm converting to production order re-explode the BOM on the scheduled date rather than the basic date of the production order.
I want to be able to do this in customizing rather than specifying a BOM Explosion Date (fixed key date) in the planned order or independent requirements. Is there anything in customizing that could do this?
Thanks!
SarahHi Sarah,
I think you have checked the note:
391846 Modif: Reading master data when converting planned order
Because only with the modification of this note, you will be able to re-explode the BOM when converting the planned order to production order, however, there is no way to set the BOM explosion date to the scheduled date during the conversion, there is no such customizing as the note only add three action for this function:
' ' Do not read
'1' Read with explosion date from planned order
'2' Read with newly determined explosion date
So if you need such function, you may try to develop the modification by yourself.
Regards,
Rachel -
Exploding BOM in service order
Dear Exparts,
I need a way to copy all the children materials in a BOM to the component of a service order as individual componenet. How can I do that. in configuration I could not find anything helpful. please guide.
Thanks
Subhro
Edited by: Subhro_86 on Feb 15, 2010 10:22 AMHi Subhro,
I thought you are talking about the BOM material for the ref technical object say functional location or equipment in the service order. If you have maintained the BOM for the equipment you can pull the all the component list in the component tab.
In the component tab click on the List button available in the component tab. You will see the list of BOM material.
DP -
Hi
I'm looking for FM which summarize exploded multi-level BOM. To explode I use CS_BOM_EXPLOSION but I want sum of items on lowest level too.
please help me.Hi Magdalena,
Have you looked this FM <b>CS_BOM_EXPLOSION</b> or <b>CSAP_MAT_BOM_READ</b>?
Hoep this will help.
Regards,
Ferry Lianto
Please reward point if helpful.
Maybe you are looking for
-
UoM field in A/P Credit Memo
Hello Gurus, I'm currently using SP01 PL04. Programmatically saved a A/P Credit Memo in draft with Base Unit=tYes, the quantity is fine but the UOM is still the purchase UoM. Please Help...
-
Unable to install downloaded driver on my Mac OS X 10.6; therefore printer useless!
I downloaded the HP Deskjet Ink Advantage 2645 driver from the site: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory? cc=gr&dlc=en&lc=en&os=4082&product=5357280&softwareitem=mp-120070-4&sw_lang=& but, when attempting to install the downloaded d
-
I've tried turning iMessage on and off, his son has deleted his iCloud account in suspiscion that that was the cause of the problem, etc. We've been texting for months without problem. This morning his son texts me, "Good morning," and then his fathe
-
Transferrng music from iPod to another computer (Mac desktop)
I have been using my Mac BookPro laptop to import and burn music but when I plug in my iPod into my G4 desktop I am unable to drag and drop any songs into the iTunes Music Library or Playlist. What am I not doing?
-
Steps to create User ID and assigne roles.
Hi, What are the steps to create User ID using BAPI_USER_CREATE1. How can I assign an User the role ECC/PORTAL/BI? Thanks in Advance Roy