Explode SD Free good determination + BOM in sales order
Hi!
I create for material sales bom + free good material (Tcode VBN1 and I tried to explode both of them in sales order, It didn't happend.
when i did order for this item, just the bom exploded, without the free good.
i need to explode both of them
Please help
best regard
shay
hi,
BOM is not supported by free goods funtionality in standard SAP.
please just go through the constraints of free goods funcitonality.
Constraints
Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: With material 1, material 2 and material 3 are free of charge or If material 1 and material 2 are ordered at the same time, then material 3 is free of charge.
Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
Free goods are only supported for sales orders with document category C (for example, not quotations).
Free goods are not supported for deliveries without reference to a sales order.
Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
If you defined a free goods for variants in a generic article (only SAP Retail), you can only process the variants in the purchase order and goods receipt individually (as single articles). In other words, you cannot process them using the generic article matrix.
thanks
sadhu kishore
Similar Messages
-
Re-run Free goods Determination procedure in sales order
Hi frnds,
Free Goods determination procedure will run when I am entering material in the sales order.
Like pricing (caarry out new pricing option)can we re-run the free goods determination procedure in sales order after entering the material.
Please help me.
Sunil GargHi Sunil,
U cannot rerun the free goods. As free goods are given based on the material whenever u cahnge the materrial quantity then only it will be rerunned, but not during pricing,. Free goods condition records r based on the material -
FREE GOODS DETERMINATION IN RETURN SALES ORDER
Hello SD experts,
When i am creating return sales order with reference to original invoice document, system copies only the main item,however it is not copying the Free Goods item even though it is displaying both the line items while adopting through option 'line items' in VA01.
I would like to request you, what system setting i need to do, so that it considers the free goods item too while adopting / copying from invoice document along with main item.
Any help for the above said regard is highly appreciable.
Thanks and Regards,
VishwanathHi,
This scenario is not supported by standard SAP.Please go through the OSS notes--549505 or go through the link given below
[Constraints in Free Goods|http://help.sap.com/saphelp_47x200/helpdata/en/dd/55fa4e545a11d1a7020000e829fd11/frameset.htm]
You may need to go for a Z development to meet your criteria.
Regards,
Phani Prasad -
Free Goods - Not showing in sales order as subsequent item
Dear Gurus,
I have created a Free Goods procedure determination and maintained it at Customer/ Material level in VBN01.
The procedure is inclusive as follow:
For every 100 units purchased, the customer gets 10 units free
However at sales order level there is no indication at all that the Free Goods are being triggered.
When I check the pricing procedure, the condition record NA00 that I have used doesn't show-up.
There is no subsequent item in the sales order under the main item showing the Free-Goods discount.
Could you please help me go through the customizing process to correct the error?
Many thanks for your help
ChrisHi,
FYI
Free goods can be configured in SAP by following two methods.
(1) Manually
(2) Automatically
Manually: By specifying higher level item category for a line item we can determine free goods as a free of charge
items during sales order processing.
Automatically: System proposes free of goods automatically in the sales order. In automatic free goods
configuration system follows two methods.
(1) Exclusive
(2) Inclusive
Exclusive: System configures free goods in exclusive option like free goods quantity is going to be excluded in
order quantity. Ex: For 10 items 1 item is free. Then system configures free goods as 10 + 1.
Inclusive: System configures free goods in inclusive option like free goods quantity is going to be included in order
quantity. Ex: For 10 items 1 item is free. Then system configures free goods as 9 + 1.
NOTE: In exclusive method other items also can be given as a free of charge items for order item.
Configuration steps: INCLUSIVE
SAP follows condition technique to configure free goods automatically.
Maintain pricing procedure
Path:
IMG
Sales and distribution
Basic functions
Free goods
Condition technique for free goods
Maintain pricing procedures
Choose free goods procedure NA0001 and select it
Click on copy icon on application tool bar and rename it Ex: SRI001
Condition type is NA00 and Access sequence also NA00
Save it and Exit
Activate free goods determination
Path:
IMG
Sales and distribution
Basic functions
Free goods
Condition technique for free goods
Activate free goods determination
Go to new entries
Specify our sales area, document pricing procedure, customer pricing procedure and specify our free goods
procedure Ex: SRI001
Save and Exit
Control free goods pricing
Path:
IMG
Sales and distribution
Basic functions
Free goods
Control free goods pricing
Control pricing for free goods item category
Choose item category TAN from position button
Specify the pricing as X = Pricing standard
Choose item category TANN from position button
Specify pricing as B = Pricing for free goods (100% discount)
Save and Exit
Maintain condition type for 100% discount
Path:
IMG
Sales and distribution
Basic functions
Free goods
Control free goods pricing
Maintain condition type for 100% discount
Check whether condition type R100 is available or not (R100 = is 100% discount)
Exit
Maintain pricing procedure for pricing
Path:
IMG
Sales and distribution
Basic functions
Free goods
Control free goods pricing
Maintain pricing procedure for pricing
Choose our pricing procedure form position button and select it
Click on control data icon under dialog structure
Include condition type R100 between the steps of discounts.
Specify requirement = 55 and Routine No: 28 (100% discount) in Alt. CBV.
Save and Exit
Requirement 55: The Routine No. 55 is assigned to condition type R100. If the user wants to look both revenues
and sales deductions for the free items since the product that we are going to give as a free of charge item can be
sold separately in the same sales order. Then the item category of free goods TANN has the pricing value as B.
Then the system calculates value of the free goods as 100% discount as we discussed above the same material [that
is going to be given as a free of charge item]. Some times the same item is going to be given as a normal item.
Then system calculates price for normal item and system should not calculate price for same item [free of charge
item]. So as to perform this calculation we have to assign Requirement/Routine 55 is to assign condition type
R100.
Alt CBV = 28: [100% Discount] Condition type R100 should be taken as a ZERO value. The formula 28
calculates condition type R100 value as a ZERO.
Set Transfer of cost to Main item: [Copy control]: Transaction code: VTFL
Copy control is a concept by which the system copies the data from source document to target document.
Path:
IMG
Sales and Distribution
Basic functions
Pricing
Free goods
Control free goods pricing
Set transfer of cost to main item [copy control]
Choose Billing type F2 Delivery document type LF from position button
Select it and click on itemicon under dialog structure
Choose item category Ex: TAN
Click on details icon
Click on display or change icon
Choose item category as TAN again
Select it and click on details icon
Check cumulative cost
Save and Exit
Cumulative cost controls whether the cost value (VPRS) is to be copied from relevant sub items into main items.
Sub items cost are not relevant for billing.
Maintain copying control: Transaction code: VTAA
Path:
IMG
Sales and Distribution
Basic functions
Free goods
Control free goods pricing
Maintain copying control
We maintain copy control at item level category for free goods. In this field we can control whether the
free goods should also be transferred when we copy from one document to another document.
Choose source document type as QT and target document type as OR from position button
Select it and click on item control button under dialog structure
Choose AGN item category from position button
Click on display or change button
Again click on AGN
Click on details icon
Check Re u2013 explode structure/Free goods
Save and Exit
This indicator controls whether the free goods are copied from source document to target document or redetermined
again.
Maintain condition records for Free goods [INCLUSIVE]: Transaction code: VBN1
Path:
Logistics
Sales and Distribution
Master data
Conditions
Free goods
VBN1 u2013 Create
Specify condition type NA00
Click on key combination
Specify all the data
Choose inclusive by clicking the INCLUSIVE/EXCLUSIVE push button
Specify the Material No., Minimum order quantity (Ex: 10), Specify [from] the free goods quantity (Ex:
10), Unit of measure u201CEAu201D (Each), Free goods (are free goods) as u201C1u201D.
Calculation procedure: We can specify the Routines for calculation procedure as 1 or 2 or 3
1 = Pro u2013 Rata (Proportionate): Ex: If the customer places order for 100 cases of material u201CXu201D, then customer
receives 20 cases of same material as free. That means, the business can say that buy 100 and get 20. If the
customer orders for 162 cases, then system automatically grants 32 cases as a free of cost (162x20/100 = 32 Cases).
2 = Unit of reference: When customer orders for 100 cases of material u201CXu201D, then the customer receives an
additional 20 cases as a free of goods. That means business can say that buy 100 get 20 free by granting 200 free
for every full of 100 cases. The customer places order for 162, then system automatically grants only 20 cases
(100x20/100=20).
3 = Whole unit: When a customer places order for 100 cases of material u201CXu201D, then the customer receives additional
20 cases of material u201CXu201D as a free of goods item. The business can say that buy 100 and get 20 free of charge items.
If the customer orders for increment of 100 that means 200 (100 + 100) items, then he gets 40. If he placed the
order for 101 u2013 199 items he gets only ZERO.
Save and Exit
Condition record for EXCLUSIVE: Transaction code: VBN1
Path:
Logistics
Sales and Distribution
Master data
Conditions free goods
Specify the discount type u201CNA00u201D
Click on key combination
Click on Choose inclusive by clicking the INCLUSIVE/EXCLUSIVE push button
Specify the sales organization, distribution channel
Specify customer number and validity periods, material, minimum quantity, order quantity, unit of
measure, calculation procedure, free goods (3)
Specify additional material free goods (if other goods is going to be given as a free of charge item.
Save and Exit
Go to VA01 and raise the sales order for INCLUSIVE and EXCLUSIVE.
See the Free Goods effect.
Condition type NRAB = Free goods: Requirement = 59, Alt CBV = 29: [only for INCLUSIVE purpose]
Requirement 59: We have to assign requirement 59 to the condition type NRAB. If the customer buys 100 cases
of product u201CXu201D, then he receives 10 cases of the product free. If the user would not like the additional line item in
the sales order for free goods rather than the discount of the 10 cases is represent in the same line item as other 90
cases. If the free goods discount should not apply on credit for returns that do not make reference in the previous
document.
Alt CBV 29: The condition type NRAB is to be assigned with 29 formula to support inclusive free goods
agreement where the user would have to apply the discount to the order item rather than having a sub item
generated for the free quantity.
Ex: The customer orders for 100 cases of product u201CXu201D, 10 cases are free instead of having a free sub item generated
b the system to represent the free 10 cases, the user would like to have a discount applied to the 100 cases line item
equal to the value of the 10 cases.
NOTE: Free goods can only be configured on document category type u201CCu201D (OR). That means we cannot configure
free goods on Inquiry and Quotation.
Header Conditions
SAP has delivered two kinds of condition types: (1) Header conditions
(2) Item conditions
Header conditions: The value of the header condition applies to the whole items in the sales document.
Header conditions do not have any access sequence.
So that, value of the header conditions should be maintained manually.
Ex: HA00, HB00
Configuration settings:
Include condition types HA00, HB00 in V/08 in between the discount condition types.
Go to VA01 and raise the sales order
Select line item and go to Go to button
Header Conditions
Include condition type HA00 HB00 with values [HA00 is percentage discount and HB00 is absolute
discount]
If HA00 = 1%, then system applies 1% on base value on all items in the sales order.
If HB00 = 100/- Rupees, then system applies 100/- Rupees proportionately to all items in the sales order. If sales
order has two items, then system applies 50/- Rupees to each item.
Click on activate button
Go to item condition screen
Check how system applied header conditions for line items
NOTE: Make sure that sales order contains more than one item.
Condition Scales
We can maintain scales for each and every condition type. So that we can determine pricing conditions values
depending upon the range of the order quantity.
Ex: If you maintain condition record for PR00 for material one as a 100/- Rs. For 1 material, then we can maintain
scales for this material like below:
From Quantity Price
1 u2013 10 1000
11 u2013 20 999
21 u2013 30 998
31 u2013 40 997
Configuration settings:
Go to VK11
Maintain condition record for PR00
Select line item and click on scales icon on the application tool bar
Maintain scales and scale rates accordingly
Save and Exit
Go to VA01 and raise the sales order
Enter the order quantity according to the scale and see the scale effect
Regards,
Siva -
Free goods determined in Delivery over Order Quantity in Sales Order Item
Hi Gurus,
I've a problem about using free goods determination.
First I created free goods master record with following information
ZG1010012060075 From 100 PC -> Free good ZG1040012060075 2 PC
Free goods Category = '2' (Exclusive)
Free goods delivery control = 'E' (Delivery proportional to quantity in main item)
Then I've created Sales Order with
Item 10 ZG1010012060075 4,000 PC.
Item 11 ZG1040012060075(Free good) has been automatically determined for 80 PC
Then I've splitted Item 10 into 4 deliveries. The result of free goods determine in each delivery are as follow:
Delivery#1)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#2)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#3)
Item10 ZG1010012060075 = 1,176 PC
Item20 ZG1040012060075 = 24 PC
Delivery#4)
Item10 ZG1010012060075 = 472 PC
item20 ZG1040012060075 = 9 PC
*Remark : Total quantity of 'ZG1040012060075'(free goods) = 92424+24 = 81 PC
(Greater than 80 PC)*
I think the system determined free goods in Delivery#4 correctly due to rounding up. But It might not be over the order quantity in Sales Order Item 11. Even though I've set the item category in delivery with Check overdelivery = 'B' (Situation rejected with an error message), the free goods are determined over order qty. BUT if I change delivery qty in delivery#4 Item20 from 9 PC -> 8 PC -> 9 PC, the error message occurred.
My point is to fix the system not determine free goods in delivery items over order quantity in sales order item.
Has anyone met this situation before? Do you have any idea about this issue?
Best Regards,
Prachya LalitnorasateDear Sai,
Thank you for your advice, but it didn't solve my problem.
I would like the system to determine free goods with proportional to main item AND In the last delivery main item delivered completely free goods must be determined equal to remaining open delivery item.
Do you have any idea about configuration/customization? -
Free Goods determination -acess sequence sales org/ plant/material
Hi
I am trying to determine the free goods by choosing the key combination as Sales org/plant/material.
The system is not determineing the free qty ,instead when i maintain the condition record with customer/Material key combination ,then the system is determineing the free qty.
I also tried to put acess Sequence Sales org/plant/material above the Acess sequence customer/Material,but still the system not detrmineing the free qty in the order.
can any one pl gide me how to solve this issue.
regards
shashiHi
Go to the access sequence where Sales org/Plant/Material are maintained as condition table.
Now select the condition table and then click the node "Fields" on the left hand side of the screen.
It may give a warning message that "Fields are not yet generated". Just ignore this and Enter once again.
Do this until it takes you to a screen where you can see fields like KOMK-VKORG, KOMK-WERKS and KOMP-MATNR
Now create the condition records and check in transaction by creating sales order. It shoudl work.
Hope this helps.
You can reward if it helps you -
Adding same Free Goods items in the sales order
Hello experts,
We are using (exclusive) free goods functionality. In condition records you can specify the free goods that should be added to certain materials when they are ordered by the customer. The problem is this: when different materials should lead to the same free goods item, the system is creating an item line for free goods for every single material for which a free goods condition record is created. The business would like to see that free goods item lines that contain the same free goods material is consolidated into 1 item line. The reason for this is that the external service provider is charging per item line that is dispatched to them. As far as I know standard SAP does not support this functionality. Do any of you have encountered the same problem? I'm very curious if there is any solution for this issue.
Regards, CharlesHi,
Not sure but still putting my openion,
Let system determine more FREE items in sales order but when creating order it should consolidate in one single line item with quantity.
For this write data transfer routine in VOFM
Write logic if in sales order have more items with same item category say TANN then consolidate it in one single line item with all qty.
And then assign same routine in copy control order to delivery.
Kapil -
Free goods from quotation to sale order
Hi
We need to supply free service with item in a quote, that can be used for the parts
copy control of the free goods between the quote and a sales order.
Can someone through any config for this issuehi,
as per SAP standards free goods are supported to the document category C. it won't support for rest of the document categories. And also to BOM, variant configuration like any other special functions also, it will not work out.
regards
rp s -
Free good flow in return sales order
Hi all I have a question that is how to make the free good item(TANN in order and RENN in returns) flow automatically in the return sales order along with the REN items. Does it involve item category proposal in copy control for billing document to sales document.
Hi Avishek,
Check your item category assignment first that renn is properly assigned to your
Order type u2013 item category group u2013 usage u2013 item category at higher level.
You can do this from the path
IMG u2013 sales and distribution u2013 sales u2013 sales documents u2013 sales document item u2013 assign item category.
Do this setting first then go copying control with the following path.
IMG u2013 sales and distribution u2013 sales u2013 Maintain copy control for sales document.
Search for your sales document type YDRE from billing document YDF2.
Go to the item level and search for item category used in billing document.
Go to the detail of that item category you will find item category proposal.
Write down over there RENN.
Now try to create the return sales order it will happen.
This setting you have to do so that it will automatically determine in sales order.
Regards
Raj. -
Hello All
I am facing a problem that in my country the taxes should be paid for the free goods also that means if I sold 100 PC of material X and I gave 2 free pieces I will pay taxes for 102 PC but the system calculates the taxes for only the main 100 PC
Regards
Jacopo FrançoiseHI,
When we dont to apply taxes we uses Normal process where we assign higher level item category to free good item category , and we determine it as TANN.
But to able to consider free good for taxes perpose we need to add R100 item category in pricing procedure with requirement 55 and Alternative condition base value as 28.
Along with that we have some setting in Item category whr you need to maintain B in Pricing relevence field (Pricing for free goods ).
With this setting you problem will be solved
Regards
Amol S -
Free Goods Flow in Return Sales Order
Dear Experts,
I have a question that is how to make the free good item(TANN in order and RENN in returns) flow automatically in the return sales order along with the REN items. Does it involve item category proposal in copy control for billing document to sales document.
Presently free item of preceeding billing document is not getting copied to my return order. Please inform us the config steps for the same.
Thanks in Advance,
Regards
SriniHi,
This scenario is not supported by standard SAP.Please go through the OSS notes--549505 or go through the link given below
[Constraints in Free Goods|http://help.sap.com/saphelp_47x200/helpdata/en/dd/55fa4e545a11d1a7020000e829fd11/frameset.htm]
You may need to go for a Z development to meet your criteria.
Regards,
Phani Prasad -
Free goods determination is not working
We are on CRM 7.0.
I'm trying to configure Free goods determination in CRM sales order TSA. We have
done all the relevant customizing under CRM -> Basic Functions -> Free Goods.
Free Goods Procedure: 0NA001
Condition Type: 0NA0
Access Seq.: 0NA0
Table: SAP010
We have created the condition master data under transaction /SAPCND/GCM
with the following parameters:
Application: PRT
Maintenance Grp: PRT_FGOODS
When we create a sales order which uses the free goods procedure 0NA001 the system doesn't determine the right product. I would expect a sub item being added automatically under the main item which is part of the offer but nothing happens. Is that the correct expectation?
As part of the configuration settings, we use TAN item category for main item and I have configured item category TANN for sub-item with item usage "FREE" (not sure this is the right setting).
I have debugged the process and in FM FGD_DETERMINE_FREE_GOODS_MULTI, IPC does not return any results or any error messages.
Has anybody gone through the same issues/pain? What point am I missing?
Thanks for input.karens09 wrote:
What is wrong?
Hello,
You are attempting to call outside your Plan coverage.
The Unlimited World Plan does not include calls to cellphones in Norway - just landlines.
Full coverage details of the Plan are here:
Unlimited calls to landlines and cellphones in
Canada
China
Guam
Hong Kong S.A.R., China
Puerto Rico
Singapore
Thailand
United States
Unlimited calls to landlines only
Argentina
Australia
Austria
Belgium
Chile
Croatia
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Ireland
Israel
Italy
Japan
Korea, South
Luxembourg
Malaysia
Netherlands
New Zealand
Norway
Poland
Portugal
Russia (Moscow and St.Petersburg only)
Slovakia
Spain
Sweden
Switzerland
Taiwan
United Kingdom
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you. -
Free Goods Determination for other transaction types
Hi,
Does anybody know of any Function Modules or Class names that determines Free Goods determination in a Sales Order? We are thinking if this functionality could be mimicked for other transaction types?
Thanks!Hi,
please consider the sap online help:
http://help.sap.com/saphelp_crm700_ehp03/helpdata/en/b7/4a893a8729337be1
0000000a11402f/frameset.htm
Check the function moduls:
Event CRM_FREE_GOODS_ADD_ITEM_EC
CRM_FREE_GOODS_DETERMINE_EC >
CALL FUNCTION CRM_FREE_GOODS_DETERMINATION
Best regards
Rene -
Alternative Free Good determination in Sales order
Dear Gurus,
We activated Free Goods determination. We are maintaining condition records in Tcode VBN1. We are creating the condition records using the fields Sales org, Distribution Channel and Sales Office. Condition record specifies the free good material and its quantity for main material with specified quantity. As of now, It is working fine and it is picking up the free good material correctly at Sales order if we create line item for main material.
As per the new requirement, if the free good material is not available in the stock, it should pick up other alternative free good material for the main material. Mean to say, we want to configure free good determination where we will specify two free good materials for one main material, then system will pick up one of the free good materials for main material in Sales order.
Ex: Main material : A
1st Free good material : F1
2nd Free good material : F2
If the stock for F1 free good material is not available then system should pick up F2 free good material automatically.
I have tried to map the another Free good material for main material in the same condition record, but system is not accepting to proceed further.
Kindly suggest what I need to do, what configuration is required. Please provide your valuable inputs.
Thanks
Chandra MouliFYI - Neel & Chandra Mouli
Substitution strategy in Material Substitution: Reason (TCode OVRQ ) controls whether product selection should occur automatically in the background or whether the alternative materials should be offered for selection in a dialog box. So, this product selection in the background is performed on the basis of the availability check.
The substitution reasons are entered in the master records for material determination.
Kindly test & share your feedback.
Thanks & Regards
JP -
Hello All,
Can any one please explain the process of Free Goods Determination with both exclusive/inclusive and the config settings .
Thanks in advance
RegardsHello Manoj
<b>Please find the detailed explanation on Free goods below </b></b>
<b>Free goods</b> play a large role in price negotiations with your customers. As a result, free goods are determined to be placed in sales document automatically. In retail, chemical industry or consumer goods industry, it is common to provide discounts in the form of free goods.
a. <b>Inclusive Bonus Quantities </b> Free goods can be part of order quantity not included in the invoice (billing). This is called inclusive bonus quantity. The ordered goods and the free goods both involve the same material. The quantity units of the free goods and the ordered goods must be the same.
b. <b>Exclusive Bonus Quantities </b> Free goods that take the form of extra goods that are free of charge are called exclusive bonus quantities. In this case, the extra bonus quantities are not typically included in the invoice (billing). This can either be an additional quantity of the goods ordered or it can be another article. The exclusive free of goods appear in the SD document as an individual free of charge item.
Both types of free goods are treated in the same way in the sales order. The material that has been ordered is entered as a main item (TAN) and the free item (TANN) is automatically displayed as a sub item. The item category determines how the item is controlled later in the business process.
The system re-reads the free goods master record in the sales order if the quantities in the main item change or if the pricing date changes. The system then deletes the sub items and re-creates them. Any manual changes to the free goods quantity are lost.
<b>Note:</b> If pricing is re-run in the sales order, it does not affect the free goods determination.
The condition technique is used for free goods. Free goods are generally regarded as a supplement to the pricing agreement for a material. You can define master records for free goods at any level such as material, customer/material, price list category/currency/material or customer hierarchy/material. The transaction code is VBN1 and condition type NA00 which automatically gets converted into R100 during sales document processing.
You can restrict a free goods condition master record for one level in many ways
a. Validity period: the condition is only valid within this period
b. Lowest quantity: the condition comes into affect when this quantity has been exceeded.
c. Delivery control:
d. Calculation type:
e. Scales
You can process different master data with the same key for inclusive and exclusive bonus quantities at the same time. You only need to press a button to switch between two types of discount. When you enter an exclusive bonus quantity, an extra entry line appears where you can enter the free material if it is not the same as the ordered material.
When you specify a calculation rule, you decide how the system determines the free goods quantity in the sales order from the additional and document quantities.
a. The free goods quantity is the quantity that is calculated from the discount quantity (not the minimum quantity)
b. Additional quantity is the quantity delivered free of charge
c. Document quantity is the quantity entered by the person creating the sales order.
three calculation rules are provided by the system i.e.
<b>a. Prorated </b> the system calculates the free goods in right proportion to document the quantity. For example if 20 units are offered for free for 100 units in the condition record and the customer orders 162 units, then the system calculates 162 * 20/100 (rounded off) as free goods.
<b>b. Related to units </b> 20 units are given for free for every 100 units ordered. In the above case the customer would only get 20 units free as he placed an order for 162 units.
<b>c. Whole units </b> the customer would not get any free goods if he doesnt match the exact quantity proposed. That is, in the above case, the customer doesnt get any free goods as the ordered quantity did not match 100 units. Anything below or over the mark will not be qualified for a free good.
Calculation rules are stored in the system in the form of ABAP/4 code. You can also define your own rules by using transaction code VOFM (system modifications).
The free goods determination procedure contains a list of condition types for the free goods. One access sequence is assigned to each condition type and each access sequence contains one ore more accesses and each access contains exactly one table. This represents the search key that the system uses to search for valid condition records.
The free goods determination procedure is assigned to sales area + document pricing procedure + customer pricing procedure just as in the case of pricing procedure assignment as free goods are generally regarded as a supplement to the pricing agreement for a material.
If the search is successful, the system generates a sub item for free goods in the document. The item category is assigned with the item category usage FREE.
You can activate an analysis of the free goods determination in the sales document. The system then displays detailed information on how the free goods were determined.
<b>Reward points if helpful</b>
Regards
Sai
Maybe you are looking for
-
Send step with TRANSPORT Ack. fails in BPE after default client change
Hi all, I had to change default client in my PI (7.0 sps 13) system from 001 to xxx. I did it according to note 940309. After this some probelms appears, for example my IPs becomes unworked and I have to repeat automatic customizing for BPE and re-ac
-
Unable to read Cookies from Browser
Hi All, The following is the scenario: Portal 1 We have intranet portal which is developed using ASP.NET and upon successful authentication a cookie(logged-in user) is created in the browser. Portal 2 We have another portal(running on Apache tomcat)
-
Bluetooth connection gets lost
Hello, I have a lumia 2520 and a 620. When I pair them with bluetooth they connect, but before I can do something with them the connection gets lost in about ten seconds or so. Why is this and what can I do so the connection remains? Solved! Go to So
-
Solaris 10, Oracle 10g, and Shared Memory
Hello everyone, We've been working on migrating to Solaris 10 on all of our database servers (I'm a UNIX admin, not a DBA, so please be gentle) and we've encountered an odd issue. Server A: Sun V890 (8) 1.5Ghz CPUs 32GB of RAM Server A was installed
-
i love osx mountain lion my question is why was air play taken out of specific app like quick time and iTunes i dont always want to display my whole computer when i am in airplay mode