Explore Logic Studio file created by the pros....
^ That's what Apple say on their Logic Studio web site: http://www.apple.com/logicstudio/
Quote: "Learn all the production tricks the pros used to create these hit singles. You can see how every track was crafted, from the original instrument, sample, or loop right through effects, processing, and mixing. Then try out your own ideas and techniques."
But where are the links to download them?
Ah! I shall now go and check that Demo Content disk. I've always liked some of the production in Lily Allen's song "Fear".
I never bothered to install the Demo Content disk as I'm not a Logic virgin. We never stop learning though.
Similar Messages
-
I am buying a new macbookpro which comes with Lion. Lion has Quicktime X. Logic Studio comes with Quicktime Pro 7. Do I have to download Quicktime 7, or will Logic Studio work fine with the Quicktime X player? Will there be a Quicktime Pro X soon?
your new lion-machine should have quicktime 7, too. if it doesn't, and if it doesn't show up after you migrated your stuff from you old machine you can always reinstall it from the logic dvd's, it's part of logic. my recommendation is to always use quicktime 7, since it's got many features that are absent in quicktime x. quicktime x is nothing but a polished video player. in quicktime 7 (pro, comes with logic) you can even do edits and paste your music onto video files. i use it all the time, especially since logic 64bit doesn't export to video anymore.
-
Converting a logic audio gold file to a Logic studio file
I have a very small (299kb) LAG file that I created in 2000. I can't open it in Logic Studio and don't have any earlier Logic software. Can anyone give me a hand and convert it to a Logic studio file. It's small enough to email back and forth. I just need the MIDI data and don't want to recreate the whole song.
Thanks in Advance!!!
jerry
[email protected]Bonjour Seeren,
Thanks for joining the conversation.
I knew about your workaround, unfortunately it's not a good solution, as what I want is jus that LX behaves as expected.
But... thanks anyway because I could solve my problem !!!
In fact, first I've now realized two main things :
1) in the LP9 project, if I display both the track name and the channel strip name in the arrange window, I can see that the channel strip name is what I will have in the Mixer once in LX, and the track name is what I will have in Track window of LX. So I could be sure that the problem came from "before" opening in LX.
2) in L9 and also in LX, when you start from a project from scratch and rename a track, Logic assign the new name to the CHANNEL NAME, not to the TRACK NAME, and I was not aware of that at all !
So I found a way to make things work :
- in the arrange window in L9, I've displayed both the Channel Name and the Track Name. For each track, I've cut the Track name and pasted it into the Channel name. That was pretty fast as they were just next to each other.
- I saved and opened in LX.
Hallelujah ! it works, and the sync remains (if I decide to change the track name, the nam in the mixer follows !)
So, basically, I have no idea why in my L9 projects, I ended up having the name being changed sometimes in the tracks names and sometimes in the channel channel name, but now I could sort it out for LX.
Additonnaly, I've realized that if I create a L9 project from scratch, then import one of my L9 song file in it (all tracks, contents, E/S, ... everything), and then do that renaming just as mentioned above, Logic would re-assign all audio channel from Nr1.
So, thank you very much, and thanks to The Art of Sound too !
I hope this topic will help some other people !!
Goooood evening !
Happy-Vince-from-Paris-France -
How to open a file created at the server through form/report at client end
How to open a file created at the server through form/report at client end
Dear Sir/Madame,
I am creating a exception report at the server-end using utl file utility. I want to display this report at the client end. A user doesn't have any access to server. Will u please write me the solution and oblige me.
Thanks
Rajesh JainOne way of doing this is to write a PL/SQL procedure that uses UTL_FILE to read the file and DBMS_OUTPUT to display the contents to the users.
Cheers, APC -
Cannot shrink log file 2 because the logical log file located at the end of the file is in use ?
HI,
I am getting this error frequently.. any recomendations :
Executed as user: DB0\sqlservices. Processing database: dbin [SQLSTATE 01000] (Message 0)
Cannot shrink log file 2 (DB_log) because the logical log file located at the end of the file is in use. [SQLSTATE 01000] (Message 9008)
Processing database: DB_ [SQLSTATE 01000] (Message 0) DBCC execution completed. If DBCC printed error messages, contact your system administrator. [SQLSTATE 01000] (Message 2528)
Cannot shrink log file 2 (DB_log) because the logical log file located at the end of the file is in use. [SQLSTATE 01000] (Message 9008)
Processing database: DB [SQLSTATE 01000] (Message 0)
DBCC execution completed. If DBCC printed error messages, contact your system administrator. [SQLSTATE 01000] (Message 2528)
Backup, file manipulation operations (such as ALTER DATABASE ADD FILE) and encryption changes on a database must be serialized. Reissue the statement after the current backup or file manipulation operation is completed. [SQLSTATE 42000] (Error 3023)
Processing database: DB_AC [SQLSTATE 01000] (Error 0)
[SQLSTATE 01000] (Error 0) DBCC execution completed. If DBCC printed error messages, contact your system administrator. [SQLSTATE 01000] (Error 2528).
The step failed.
Please give any receomendations to avoid this error in future :
Yangamuni Prasad M
Hi Yangamuni,
Are there any progress?
Please have a look on the below threads with the similar issues as yours:
http://www.sqlservercentral.com/Forums/Topic652579-146-1.aspx
http://social.msdn.microsoft.com/forums/en-US/sqldatabaseengine/thread/ae4db890-c15e-44de-a2af-e85c04260331
The solution is change the recovery mode to SIMPLE, shrink log files and then change to the FULL recovery mode.
Thanks,
Weilin Qiao
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread. -
How can I make I-cloud back up only the files created since the last Time-Machine backup?
Hi everyone,
So, I wish to use time-machine to back up every six weeks or so. This means a whole range of files could be lost if my wonderfully fast but terrifyingly unrecoverable solid state hard drive packs up.
Has anyone any idea how I can make Icloud only backup files created since the last time machine backup?
Best
DannyAutomator is not the right solution.
Use a folder action script. Apple has an example here: (Auto-backup Script):
http://www.apple.com/applescript/folderactions/05.html
the steps might have been written for 10.3, so the steps may not be 100% right, but this will do what you want. -
How to view the File created against the Transport Request in ASCII format
Hi all,
We have a requirement where in the file created against the Transport reauest and its content should be viewed in ASCII format.
Experts do you have answer for this.
Is thers any method to work out.
Thanks in advance.
Every usefull answers will be awarded points.*********Hi Anji Reddy,
Thanks for your reply.
Let me clear my querry.
when we create a program in se38 and save it in a zxxxx package then it will create a transport request. The Content of TR i mean is not the Program name or the object list in the TR. The content i mean here is the abap code written in the program. which will be stored as a file in the server. when we open this file it will give the SAP format. Which i want to view in ASCII format. -
How to use PowerShell to find files created in the last 15 min and bigger than 5 KB
Hi!
I am trying to write to a text file, the files created in the last 15 min and bigger than 5KB
I have created this PowerShell script but it's not working. Can somebody help me with this?
$Notprocessedfiles = Get-ChildItem c:\test | where {$_.Lastwritetime -gt (date).addminutes(-15)}
if ($Notprocessedfiles.lenght -gt 3KB)
$Notprocessedfiles | Out-file c:\test\maybe.txt
Thanks!Do it the PowerShell way. It is easier and faster.
Get-ChildItem c:\test |
Where-Object{$_.Creationtime -gt (date).addMinutes(-15) -AND $_.Length -gt 5Kb} |
Format-Table -Auto |
Out-String |
Out-file c:\test\maybe.txt
¯\_(ツ)_/¯ -
What is the difference between logic studio academic version and the normal version ?
what is the difference between logic studio academic version from the other versions ?
No difference... the Academic version cannot be upgraded to the next major revision.
If you had putchased the Logic 9 academic version you get all the updates 9.0, 9.03, 9.1, 9.3...etc
When Logic 10 rolls around you would have to purchase the application at full price, your version isn't elgible for the upgrade price.
Same software as the retail version though.
pancenter- -
Editing wave-files created on the Zen Mi
I read on http://www.radioandtelly.co.uk/zenmicro.html that files created on the Micro using the built-in microphone are sampled at 64kpbs, 4 bit, my recordings appear to be sampled at 256 kbps and a unknown bit rate. However, these files cannot be edited using Wavelab or Steinberg Clean, as the require a bit rate of at least 6 bit.
How do you guys edit these files, what tools are you using?For me they're described by Windows as 64kbit/s, 4 bit, channel, 6Hz, IMA ADPCM.
The freeware Audacity can open and edit them. -
Is there a way to open a .mst file created in the student edition with MULTISIM 9
When a student builds a file with MultiSIM 9, the circuit is created as a .msm file. When the student goes home to work, they can open a .msm file with a student version, 2001 for example, but any change to the file can only be saved as a .mst file. As soon as the file is saved as a .mst file, we have not found a way to open the file with the educational version of MultiSIM 9. Is there any way to convert these files? This makes it very difficult for a student to work at home for a project between or prior to labs.
ThanksJKR,
Unfortunately, the ".mst" extension is supposed to be open only by Textbook editions of Multisim. Not even a Power Pro version would be able to open it.
I'm not sure the specifics of your case, but I guess that you open/saved the circuit on your textbook edition and that converted the file extension, is that right?...
Well, as far as I know the textbook editions are meant to be 'demo' type of releases, so is limited in many features. You should be OK with a Student edition though -- which is not the one commonly found in textbooks.
Nestor
National Instruments -
Logic Studio comes with quicktime 7 Pro. where is it?
as the box indicates in the "contents" section beside the requirements section in the top side of the box, it gives the list of all the softwares that come with logic studio (e.i. logic pro, soundtrack pro2, waveburner, compressor... blah blah blah all that... but it says close to the end: quicktime PRO 2, which i guess is a "better" version, or it has more features... i dont know. the thing is i dont quite see that i actually have it installed on my mac. when i open quicktime and check on the "about quicktime.." it says its only quicktime.. but doesnt say anything about being PRO 2. its also the 7.5.5 version...
Since i installed everything from logic studio.. and still cant seem to find a way to see that QT pro 2 has been installed on my mac, can anyone explain to me what could be happening?
thanks.This has had a lot of people confused. Logic doesn't actually come with any software for Quicktime Pro, because you already have it imbedded into the regular version of Quicktime. When you buy QTP, or buy something like Logic that includes it, it simply 'unlocks' your regular version of Quicktime, which allows you access to a bunch of features that regular Quicktime didn't have.
Open System Preferences->Quicktime, and it should say: 'Registered To: Apple Pro Apps User' and 'Registration Code: Automatic.' You'll also notice that the 'Q' graphic on that window has a little 'PRO' tag on it too.
If you were still running the regular Quicktime, when you went to the QT Player, and dropped down any of the menus from the menubar, most of the options would be grayed out and say 'Pro Only,' or something like that. Now all of the options in those menus will be available.
And yes, it should be version 7.5.5. -
I cannot load logic studio into my retina macbook pro from disc
I am trying to load logic studio from the upgrade discs that I brought when it first came out and it's not loading on my retina macbook pro. I'm loading it through the external superdrive. any help would be great.
Could it be because you are trying to install from upgrade discs? Do you have the installation media for whatever version you upgraded from? If so, you might try installing that version and then doing the upgrade installation over that.
-
Txt format in a file created by the Payment Medium Program
Hi,
I need some help with a query from Payroll France.
They use the transaction PC00_M06_FFOT (program RFFOF_V) to transfer payment data to banks.
This program creates a txt file that is accessible to the payroll and accounting teams. This file is stored on local discs and as txt format it can be modified.
The last audit pointed to this as a potential issue. The data in this file is very sensitive and shoud be secured against any modification.
The program is SAP standard and the txt format is compliant with the system used by banks. That is why I am not sure if the file format can be modified. We were thinking perhaps a PDF fike would be an option. However, our Development do not want to touch at the change before we know if this will not be a problem for the banks' system.
I've created a note for SAP about already but they say it is not really an error and in fact beyond their scope.
Would appreciate some advice from you.
Thanks,
Monika.Monika :
When running payment transfer to the bank (i.e. RFFOT or RFFOV), you have an option to either have the output file created (at application server) or a temse file created (which you would go to DME management to process downloading to a file (e.g. in your local PC machine).
Having the ACH file created on application server site usually should be quite secure in my opition (first of, not many ee should have access to application servers; second, you can control not to allow non-authorized personnel to access to certain directories in application server; third, usually, when ACH file is created, it usually will be picked up by an automate process to send the file to the bank (rather than manual process)) . Just my thought on your audit issue .
Rgds. -
Why won't excel read my csv file created with the powersell out-file automatically.
I wrote a PowerShell script that creates a CSV formatted file. The script simply creates a comma delimited string for each entry and adds it to a collection. Then the out-file command write it to a file.
When you open it with Excel each line is put into one cell. If you import the file and specify the "," as the delimiter, it imports just fine. If the data is saved out again as a csv file, the file is about half the size and opens
just fine with excel.
If you open the original file and the file created by Excel with notepad, they look the same.
So the files are different in size, contents look the same, but Excel won't automatically open the original file.
Any ideas of why this happens? Also PowerShell and Excel are both running on Server 2012 R2. Excel is a remote app.
If I do an export-CSV, I get some kind of information about the object.
Here is the script:
foreach ($group in $groups)
$header += '"' + $group.name + '",'
$CSVdata = @()
$CSVdata += $header
# Create a user entry
$users = Get-ADUser -filter * |select SamAccountname, Name | sort SamAccountName
foreach ($user in $users)
$Groupmembership = Get-ADPrincipalGroupMembership -Identity $user.SamAccountName
$userentry = '"' + $user.SamAccountName + '",'
$user
foreach ($group in $groups)
if ($Groupmembership.SamAccountName -contains $group.SamAccountName) { $userentry += '"X",'}
else { $userentry += '"",' }
$CSVdata += $userentry
$CSVdata
Out-File -inputobject $CSVdata -FilePath c:\batch\GroupMembership.csvOk the script works exactly like I want it. Thank you very much.
I am trying to understand the script but I am unable to figure out what the line "$keys=$t.Keys|%{$_}"
does. I figured ".keys" was a method but my search for it comes up blank. Do you have a reference you can point me to?
Maybe you are looking for
-
I downloaded the ibooks application on my ipad 2. It showed books in the library. It downloaded and charged me for 4 books I didn't order. How do I get a refund? Is there a phone number to call? And why did this happen?
-
Why FlowLayout - JPane will NOT auto adjust in size?
Hello java friends, I don't understand why my little demo program's JPane(use FlowLayout manager) will not adjust the size correctly. When run, I see one row of buttons, which only show 11 of them; the rest are shown on secon row which only visible i
-
I put in a commercially produced DVD of a film that has played many times without any problem and the system responds by asking me "What I would like to do with this blank CD-ROM" Is there a system log somewhere that has got in a mess ? G4 Powerbook
-
Hi, I am new to Blackberry and my ipod recently broke to i bought a 32GB memory card and uploaded all of my music onto it. However, when i instert it into the phone a message always comes up: 'media card contains errors, do you wish to repair it now?
-
Can anyone give me some insight as to why my applet is hanging? I just get the grey rectangle and no output in the java plugin console as to any kind of errors. I think it may have to do with hte ContentPane in both the main() and init() but I am not