Explorer 7 just installed; Related Topics don't display
We just installed Internet Explorer 7 last week. And now NONE
of my Related Topic buttons display AT ALL!! Even if I enter a new
one, it just shows an empty box sort of thing. I'm assuming it's
due to the Internet Explorer installation. Has anyone else
encountered this? Or better yet, does anyone have a solution or
workaround??
See this
this
link helps.
Similar Messages
-
how do I log in to Adobe Photoshop Elements 13? I have windows 8. Just installed and says done correctly. /B
BRIAN; THANK THE LORD FOR GOOD PEOPLE LIKE YOU THAT HELP OTHERS. ADOBE PHOTOSHOP TECH SUPPORT IS THE WORST TECH SUPPORT I HAVE EVER SEEN. I CALLED THEM AND 2 TIMES I TALKED TO INDIA OR WHEREVER, AND COULD NOT UNDERSTAND THEM. THE THIRD CALL I WAS TALKING TO A GUY AND WAS DISCONNECTED. I TRIED TO CONTACT TECH SUPPORT ON THE NET AND THAT WAS NOTHING BUT A PROBLEM AND COULD NOT GET MY MESSAGE THROUGH. I CALLED ANOTHER # AND THEY WANTED TO CHARGE ME. THAT'S BAD. I JUST PURCHASED THE ELEMENTS 13 AND THERE IS 0 TECH SUPPORT. THANKS AGAIN BRIAN. """DINO"""
-
I just installed CS4 and don't know how to UN-install CS3. Who can help please?
I found that all of the CS3 products are still installed on my HD - would like to uninstall them but don't know how.
Use the uninstaller on the CS3 DVD.
-
New topics are compiled in but don't display when help button is pressed
Folks,
I'm using RoboHelp HTML Build 6. I am the only writer who uses RH and have been using this build for 2 years or so.
I recently got a new map file from the developer containing 2 new map IDs. I used the same steps to import the map file, create the new topics, and map them to the new map IDs that I have been using for years. But when I compiled RH and pasted the chm into the application folder, those 2 new topics don't display when the help button is clicked on the dialog box to which they are mapped.
When I generate the chm I can look at the output at the bottom of RH project view and see that that the 2 new htm files are being compiled into the RH project. I can also see them if I open the generated chm and go into the TOC and click on a link to them.
Does anyone have any ideas? I have tried redoing the usual procedure (see below) for the importing and mapping from scratch several times. I have also tried BugHunter (see below).
Procedure for Importing and Mapping (this time the help for all the older dialog boxes works but not for the 2 new ones)
1. Open the new map (.hm) file from the developer and add #define followed by a space to each entry beginnng with the string HID in the new map file (I don't know why but nothing works unless I do this.)
2. Delete the old map file from the RH project.
3. In Windows Explorer, copy the new .hm file into the RH project folder.
4.In Project Manager view, open Context-Sensitive Help. Right-click on Map Files. Select Import. Browse and select the new map file.
6. Map the new topics using File, Edit Map IDs.
7. Generate the .chm and pasted it into the application where it always goes.
BugHunter Procedures and Results
I first tried the Test HTML Help API dialog.
I specified the .CHM file I compiled and tested both options:
--HH_DISPLAY_TOPIC: I put in the name of the new help (htm) file and its relative path and clicked Help. Nothing happened.
--HH_HELP_CONTEXT: I put in the Map Number for the new dialog box and clicked Help. The new help topic I had created displayed.
I also used the Tools tab in BugHunter to do a CSH (context sensitive help) Test. I identified the chm file and opened it and put in a new map number, then clicked Show Help. Nothing happened.Welcome to the RH forums.
On the surface it sounds like you have done everything correctly so it should just be a case of going back and double checking that you have the correct CHM, that the mapid is exactly the same as in the app and that the app has been updated.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter -
Related Topics do not show Display button.
I changed the label on "Related Topics" now the Display button does not appear when viewing the topics after generating. I tried changing the label back to Related Topic, but that didn't work. How do I get the Display button back?
http://
-
jpeg photos sent to me in emails don't display -- just get a torn page type box. Prior emails saved in folders are also affected. If I forward the email to an email account in Explorer they work fine.
Thanks, but I had already tried these Firefox suggestions. I don't think it is a Firefox problem after all, since even when I load my Yahoo email account in Explorer the images don't display. Interestingly enough, when I forward them to my husband's Yahoo account, or my Google account, the jpegs display fine. This appears to be a somewhat new problem, and only in MY Yahoo email account. I have not knowingly made any changes to it in the last few weeks. I've tried to find suggestions in Yahoo's site and in my service provider's site (AT&T). No luck.
-
I just installed MS Office 2013 but I don't find where the programs are.
I just installed MS Office 2013, when I try to access Excell or Word, I don't find them in my system. In the past, as soon as you install MS Office, each program (Excel, Word, Power Point) shows in the desktop.
This question was solved.
View Solution.gavega
Welcome to the HP Community Forum.
You can try searching your Start Screen / Apps
This might help:
Search Start Screen for Installed Application
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur -
I just installed Firefox 5. How can I remove the Bing search from the address bar. I don't want to see Bing at all. I tired the Firefox options, right-clicking on the search field and the toolbar selection drop-down but could not find a way to get rid of that unwanted search window.
*'''at the bottom of firefox''' there is a weird looking greenish circle with a lightning bolt in it*
1. click it and hover over to '''PREFERENCES'''.
2. click the second circle that say's '''BING.'''
3. '''Un-check''' both boxes.
4. you're done :)
Note: it's not going to show the google symbol encrypt when you open a new tab it's just going to automatically use google as a search engine. -
Sorry for the long headline - I'm new to the support community and thought that was the post! I've been happily using my old version of iMovie - I don't even know the number - I guess it was 11? I just installed the most recent 10.0.2 and it is radically different from what I've been using. For starters, whereas my uploaded video used to be in the lower section, and I would edit up above, now it's reversed. Whereas I used to click on the transitions and drag a blur or whatever to my movie right while I was editing, now it's on a different screen. And the easy old Export file button is gone, where you could choose setting, file size, export as Quicktime movie - all gone - now it converts to mp4 and I STILL can't figure out how to get it back to .mov
Please don't say "read the Help manual" - I tried - there's nothing there about any of this. And by the way, I'm not a techie - I taught myself what I needed to know about the old iMovie and am now lost so please no snarks. I would appreciate any help.Select in browser your movie, click Export on toolbar, choose iTunes, QT etc. then choose size of your file in opening window. And then click Export in this window.
-
I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?
I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?
-
I had iLife pre-installed on my aluminium Macbook 2009 with OSX Leopard on it. My hard drive broke but got most of the info off it and just installed snow Leopard on to a new drive and then downloaded and installed Mountain Lion over it. Now I don't have iLife anymore. How do I get it back?
Welcome to Apple Support Communities
Mac OS X doesn't come with iLife applications, so you have to install them manually after installing Mac OS X.
Insert the Applications disc or Mac OS X Install Disc 2 DVD and install iLfe applications. Then, open > Software Update, and install the latest update. If you want, you can purchase iMovie, GarageBand and iPhoto in the App Store, so you will get the most recent version -
I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?
And I cant work out why all of my pictures are not diplaying in iphoto?
Is this iPhoto on your Mac? Are you referring to the photos that were in your iPhoto LIbrary prior to the upgrade to iPhoto 11? If so then apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If that's not what you're referring to then you should describe what is happening in more detail. Remember we can't see your Mac or your iPhone so need detailed and accurate descriptions of what you're experiencing.
Also we need infomartion like do you have an iCloud account and are you logged into it on all of your devices, iPhoto and Mac? do you have Photo Stream enabled on both.
OT -
I just installed Airport Extreme. It works as a wireless network on my Macbook. It won't connect with my Windows Visa PC. Message reads: "settings saved on this computer for the network don't match requirements of the network." I seem to need to enter a security key/passphrase to connect to the PC. Where do I find them?
Thanks for your help.I assume that you have Wireless Security enabled on your AirPort's wireless network. The issue maybe that the PC is unable to use the WPA password itself and will require using the Equivalent Network Password instead.
To get this password, you will use the AirPort Utility from the MacBook:
Start the AirPort Utility > Select the AirPort base station > Manual Setup
Now, before doing anything else, go up to the utility's menu bar at the top of the screen, and then, choose "Base Station," and then, Equivalent Network Password from the drop-down menu. You will see two items: 1) WPA Password, which should look familiar to you, and 2) WPA Pre-Shared Key. It should be a long hexidecimal set of numbers and letters. Jot down this second item.
You will want to use the value you just jotted down when entering the password from the Windows Visa PC. -
I just installed a multifunction Lexmark Pro905 printer and it will not print articles from Firefox, but will from Explorer??? Are there settings in Firefox to solve this??
When you initiate printing with {Ctrl + P}, are you able to select that printer in the Printer - Name box?
http://kb.mozillazine.org/Problems_printing_web_pages -
I just purchased LR5 online and installed it on my PC. I entered the serial number I was given and it said "this is an upgrade serial number. The serial number from your previous version of LR is also required." Since I just bought it I don't have a previous serial number. What do I enter?
You return the upgrade version since it was purchased in error
Return, cancel, or exchange an Adobe order
Purchase a full version.
Maybe you are looking for
-
Fix for slow-as-hell refurb ThinkPad Twist S230u
I recently got a refurbished ThinkPad Twist, and I was having issues with lagging - everything was taking forever, both web-based and local. Kept monitoring performance and nothing seemed amiss with memory or processing, nothing wrong with my interne
-
How to make a child parent relation between 2 frames
hey ppl i have 2 JFrames n i want to open the 2nd frame on the actionEvent of the first one.. now the problem is if i close the first one that is the Parent frame i want that the 2nd one should also close.... so what can i do to have this parent chil
-
Transfering records to CD HELP!
I have been using Logc 7 for some time to transfer records to CD (I have my record player plugged into the mic port of my Fire wire 410, then import the record as audio) Here's the problem: When the record imports into Logic, it literally becomes one
-
Problem on idoc filter on - ALE
Hi all, I'm working with ale, in particular with CLFMAS IDOC. In trx. BD64 we have a filter for this idoc. The problem is that I need to filter the field E10CLFM-objek with a select-option and no with single values? Is it possible? regards, enzo
-
I am a bit frustrated with Presets. I have created a Preset named " Identity and copyright". I want to use this Preset during importing all images. However, I'm having some confusion in the Metadata section while in the Library module on the Right P