Explorer and icon Missing in the Workspace

Hello All,
I am using Rapid Deployment document to install HFM on windows 2008 R2 64 bit server. I installed Foundation service , RA / Financial reporting services and HFM.
After I start the services, I don't see the explorer and icons for HFM under Navigate > Administer doesn't show up.
Even under Workspace Server settings > Enabled Products, i just see HFM but I dont see Explorer and Reporting and Analysis Framework
Things I have tried so far.
1. Checked HAVA id between
select * from hss_component_property_values
where property_value like 'HAVA%'
and
select distinct application_id from css_provisioning_info where application_id like 'HAVA%'
2. Applied Release 11.1.2.1.000 Patch Set Exception (PSE): 12552933 Patch
3. Restarted Foundation, RA_FRAMEWORK and RA_FRAMEWORK WEB APPLICATION and OHS server in sequence with 1 min apart.
4. Re-ran the config by dropping the tables.
Can anyone suggest something else to make it work ?
Thanks

Check user_projects/epmsystem(X)/diagnostics/logs/ReportingAnalysis.this has logs related with RAFRAMEWORK services which should have some errors.
Also ensure that RAFRAMEWORK web app shows as RUNNING in startup logs without any errors.
Thx

Similar Messages

  • RoboHelp x5 TOC and index missing when the project is converted to RoboHelp 10

    As the title says, RoboHelp x5 TOC and index missing when the project is converted to RoboHelp 10. Any ideas for recovering or importing the x5 TOC and index?
    Before this is suggested, auto-create is not an option.

    Hi there
    Perhaps give this a try. From the Project Manager pod, right-click the Table of Contents area and choose "New Table of Contents". Give it a name and enable the "Copy existing Table of Contents" check box. Then click the Ellipsis icon on the far right side. See if you have a .HHC file in the folder. Odds are, you will. That will be the existing (missing) TOC.
    Hopefully that will work. If so, repeat the process for the index.
    I think when upgrading the project something goes wrong with naming.
    Let us know if this helps... Rick

  • Hello i need help for adobe creative cloud...when i launch application adobe  cc 2014  for photoshop or illustrator.....the apps launch and i can see the workspace and menu bar  for a while and  suddenly this application close automatic

    hello i need help for adobe creative cloud...when i launch application adobe  cc 2014  for photoshop or illustrator.....the apps launch and i can see the workspace and menu bar  for a while and  suddenly this application close automatic

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • When I open Photoshop Elements 12 it starts to load and then never open the workspace then will not load at all unless I reboot. ?

    When I open Photoshop Elements 12 it starts to load and then never open the workspace then will not load at all unless I reboot. ?

    When I open Photoshop Elements 12 it starts to load and then never open the workspace then will not load at all unless I reboot. ?

  • Change Icon missing in the existing SC in ITS URL

    Hi Gurus
    User is trying to change some details in existing SC, user is able to find the SC in Check status and clicked the details button   it will display the document item details, but the Change Icon is missed for the user.
    Until last week, user was able to make changes before the cart was approved, also I verified the change details in SU01D, and nothing has been changed.
    Also I verified my user ID in testing client, I am able to see the change Icon .
    Please advice
    Thanks & Regards
    Sada

    Hi,
    Please check the value of the parameter BBP_WFL_SECURITY  in trascn PFCG for the EMPLOYEE role. See whether that is set to value  low/medium/high so that the employee sees the CHANGE button.
    BR,
    Disha.
    Do reward points for  useful answers.

  • Why is the Mac HD icon missing in the Startup Disk window?

    The Mac HD icon is missing in the Startup Disk window in the Lion Partition on my iMac. It is also missing from the Snow Leopard partition.  I did not install Lion on my MacBook and the Mac HD icon is in the Startup Disk.
           Startup Disk (in Snow Leopard and Lion)
    MacOSX, 10.6.8,             Mac OSX, 10.7,        Network Startup     (no MacOSX icon)
    on Snow Leopard 1            on LIon 2
    Any ideas about this?

    I am currently in the same situation, and have Paragon installed on my Mac. Furthermore the Option key does not work when I try to hold it down during startup.

  • How to restrict users working on Windows 7 clients from accessing Windows Explorer and other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2

    Dear All,
    We are having an infrastructure setup of around 500 client computers managed through group policy.
    Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
    Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
    It would be great if you can assist me with the following query.
    How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
    Can we disable Network Tab on the left hand pane ?
    explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.

    >   * explorer.exe is blocked already, but users are able to enter the
    >     Windows Explorer by clicking on the name which is visible on the
    >     Start Menu.
    You cannot block explorer.exe when you do not replace the shell - the
    desktop you see effectively IS explorer.exe...
    Your requirement sounds like you need a custom shell:
    http://gpsearch.azurewebsites.net/#2812
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Safari icon missing on the dock???

    Safari icon not on the appl

    Spotlight can find it for you. Magnifying glass in near the upper right corner of the Menubar.

  • On one user account: finder blinks and icons missing

    I have 2 user accounts on our iMac G5. One account works fine and the other is messed up (Finder blinks repeatedly at startup, and many icons are missing)... Disk Utility found a couple things to repair, but no improvement.
    Aside from deleting and recreating the account, any other steps? What else should I look for or be aware of?

    Just make sure that whatever you put on the account is not corrupted, check to make sure it works on your main account before transferring.

  • My macbook pro 15 inch freezes up. I forced a shutdown. After reboot, system restarted to factory settings, applications/softwares disappeared, apple dropdown menu disabled, dock and icons missing, keyboard not functioning

    Hi. I'm in need of great help as I do not understand how this could have happened.
    I had my firefox on, with multiple tabs and windows as I was doing intense research for a paper. My screen then freezes up, but my mouse could still work. Having experienced this before, I immediately pressed and hold the power button till my macbook pro shuts down.
    After which, I switched it back on. To my horror, everything was resetted to factory settings: my desktop background was replaced, the fonts on the clock display were different. But this wasn't so bad.
    After which, I realised that my dock went missing, together with the icons. I clicked the apple drop down menu, and my screen hanged momentarily, and in that moment everything on the screen disappeared (including the upper dock) for a few seconds and appear again. Meaning, i cant click the drop down.
    Similar thing happened with my spotlight. Using the hot keys command-space, the dropdown appeared on the top right, but when i started to type, the screen disappeared and appeared again like before.
    Finally i checked my applications folder, and it seems like all the applications are missing, like they have never been installed before! Their folders are there, but the icons and apllications themselves aren't. No applications/software installed- not even the utilities and system preference softwares that came with the macbook.
    Luckily though, all my documents are safe. I just cant open them because my iworks and adobe are all missing and "not installed". I cant even access the internet. I'm doing this via my iPhone.
    So basically i cant do anything because my apple drop down menu is unreachable, so is my spotlight, and my apps/softwares like system preference, utility are all missing. Is there a way i can troubleshoot this? Or make my macbook work again? I have already restarted and shutdown and switch it back on again near five times.
    I know my explanation is long, but do help me if you can. I'm really at a lost right now...

    Hi
    Thanks for the help. I did what you advised, but it still did not work.
    The repair disk was successful. Unfortunately when the system restarted to boot my startup disk, I faced the exact same problems as I did previously. I also did a hardware test, but no problems were found.
    Even tried powering off and on the macbook pro again but the same problems remained...
    I tried to back-up my files too but they refuse to copy/move into my hard disk drive folder.
    Nothing works.
    Do you have other ideas? Or suggestions?
    Thanks so far!

  • Bridge Browser icon missing after the upgrade to OS2

    I have suddenly realised that the Bridge Browser icon has been missing from my PlayBook after the Upgrade to OS2. My service provider data plan supports browsing and I use to do that earlier on OS1. Now a days, since I am mainly using Mifi device...did not use Bridge Browser....BUT suddenly realised that this icon is missing.....
    Any idea what I need to do to get that icon back on PlayBook? and also use it....

    It's really funny...The OS2 manual says that there will be an icon for Bridge Browser....but in reality...you do not require any separate bridge browser icon...Browser main icon works for both...wifi connection as well as bridge connection....
    I am surprised, why RIM has not highlighted this fact in its OS2 manual.....
    Anyways....my problem is resolved....

  • Yellow icon missing from the Printhead

    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c04305525
    HP released a limited number of printheads that are missing the yellow icon. The yellow icon indicates the correct slot for the yellow print cartridge.
    Figure 1: Example of a printhead with a yellow icon
    Figure 2: Example of a printhead without a yellow icon
    SolutionYou do not need to take any action. The reliability and performance of the printhead are not affected. The printhead is still a genuine HP product that functions the same as a printhead that has a yellow icon. When it is time to insert a yellow cartridge, insert it in the slot between the cyan and black cartridges.
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

    Michelle I. wrote:
    I have Time Machine backups. Will that work?
    yes, but you need to know what exactly to restore. otherwise you'd have top restore the entire system which might be an overkill.
    I tried to open up the Core Services folder in Finder but it says it can't be found.
    what do you mean?? I gave you the path to that folder. just open it in Finder. also, you didn't answer my question. where exactly is the copy of Spotlight.app that you changed?

  • Flash Player 9 + Firefox / Internet Explorer and Proxyserver Settings inside the Browser

    Dear Adobe,
    according to this document from your Website:
    http://www.adobe.com/devnet/flashcom/articles/firewalls_proxy04.html
    which says:
    "When running within a browser, Macromedia Flash Player uses
    the browser's HTTP services to communicate through RTMPT. Since
    browsers also support SSL, why not add in support for secure
    encrypted HTTPS tunneling? That is exactly what Macromedia did. You
    can request an HTTPS tunnel using a third protocol: RTMPS."
    it should be so, that the Flash Player (up to the latest
    release) that for the RTMPT mode the player should use the http
    methods of the browser.
    Using the http methods of the browser means, that it should
    honour also the Proxy Server Settings of the Browser (it doesn't
    matter if that is firefox or internet explorer).
    We tested that with our own application, but it looks like,
    that flash player in rtmtp net connection mode doesn't honour the
    browser settings or using the http browser methods.
    It looks more like that, that it creates a self made tcp
    socket connection to the fms server, which is correct when you are
    not using rtmpt, but according to your documentation, it's not.
    Please advice me, how to reach a FMS via a simple (i.e.
    Squid) Proxy on port (i.e.) 8080 which is being set in the browsers
    settings.
    And I don't think the Flash Player is just for private
    customers who are using the internet without any proxies.
    Thank you very much in advance for your help and your
    answers...
    If you don't want to reveal the secret, please write me via
    my personal email which you can get from my profile.
    Thx,
    Stephan

    quote:
    Originally posted by:
    Erik Engineer
    I am also hoping they correct the check for MMX back into
    Flash player (and it would really be nice if they have a non-MMX
    supported code path too). Perhaps I should pull the ActiveX module
    up in a debugger and look for a non-MMX code path and see if I can
    patch one to work.
    I thought of "back-reving" to the latest Flash 7 player to
    see if the issue goes away but I have yet to do that.
    Good luck looking for a non-MMX code path hidden upstream of
    the offending MMX instruction.
    Going back to Flash 7 is relatively easy and you will
    suddenly be able to visit places you haven't been in years, but
    there are still some sites that will block you unless you have
    Flash player 8 or 9.
    First use the Adobe uninstaller to clean up which is found
    at .
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14157
    Then find a copy of :
    flashplayer7r61_winax.exe
    and run it. That will give you the latest Flash 7.

  • Adobe acrobat won't start and icon missing

    When I try to start acrobat it opens and then closes. I don't even get a chance to open a file.
    I have tried to delete it but it won't. It says its uninstalling but never finishes. (Waited 30min with no change) restarted my Playbook and it still doesn't work.
    At some point I lost my adobe acrobat icon, its has a space on my screen with the name but no icon.
    Any ideas how to get acrobat working again?
    Right now I'm thinking a security wipe is the only way.(And I don't want to do that)
    Thanks
    Solved!
    Go to Solution.

    hmmm, sorry I couldn't be of more help. Maybe try settings permissions to denied then try to delete. If that doesn't work then you might have to do a factory reset.. I am in the same boat, my video and games and freezing and am left with little choice but to try a total reset... I will let you know how it goes...

  • Foreign trade fields EXPVZ, IEVER and etc missing in the Delivery

    Hi Group,
    I am facing issues while trying to get the values automatically from table T617 for the following fields in Delivery:
    Mode of Transport-Border     - EIKP-EXPVZ
    Domestic Mode of Transport  - EIKP-IEVER
    Customs Office of Exi t           - EIKP-ZOLLA
    Customs Office of destination - EIKP-ZOLLB
    Data maintained using the tcode VI95, but still I am not getting these details in the Delivery.
    Master data is for the Bill-to and Ship-to party is checked ok.
    Please let me know if any additional customizing is required or some thing is missed out?
    Awaiting for the expert guidance.
    Regards
    Vishnu,

    Hi,
    Please follow these steps,
    1. Define the customer office
    2. Define mode of transport
    3. Define Valid Combination: Mode of Transport - Customs Office
    and then
    4. Default Values For Foreign Trade Header Data, maintain the departure/destination country combination here
    and then create a sales order with the shipping point from the departure country and ship to party country as departure country combination that you maintained in step 4. And create delivery-->invoice and save it.
    Now you will not have this error
    thanks
    Deep blue

Maybe you are looking for