Explorer Cannot Display Web Page Desk Top 3000J1157387-A11

Originally worked fine displayed web page withOUT a problem FOR OVER A YEAR. Starting in Jan 2008 (just after warranty EXPIRED) it just reports "cannot display web page" Using my Xp computer I can get all of the web pages to respond.
Using internal checks on the Lenovo 3000J it reports everything is OK.
I can receive updates on this computer and just today I installed all updates through 4/20/2008. Windows Upgrade works fine on the Lenovo. However I cannot access the web otherwise. I am typing this message on my Xp. Computer because I have not been able to get a webpage to display on the Lenovo
I want to stay with Vista Home Premium however HOW CAN I GET THE WEB PAGE TO DISPLAY ?
VIC
Message Edited by vicflack on 04-20-2008 10:51 AM

Thanks for the helf. I disabled the firewall which is norton. and then rebooted still not able to display the web-page. However I may have gotten closer to the problem.
When I select "Properties" from the file menu on the "Cannot display page" I get the following address:
res://ieframe.dll/dnserror.htm#http://www.yahoo.com
Of course it cannot display this page because it does not exist. The page I tried to load was http://www.yahoo.com when I select this page on my Xp computer it loads correctly and under file- properties -address http://www.yahoo.com and all is well with the world.
For some reason on my Lenovo Vista Home Premium Computer Internet EXployer is inserting
"res://ieframe.dll/dnserror#http://www.yahoo.com
Thanks for any help
Vic

Similar Messages

I keep getting internet explorer cannot display web page when trying to download itunes. This only shows on half the page where the download link would be. My internet connection is fine.

I keep getting internet explorer cannot display web page when trying to download itunes. This only shows on half the page where the download link would be. My internet connection is fine. Any idea what the problem may be?

You won't see anything obviously related to iCloud, Jimmy. But if you go to the home iTunes Store page while logged into your iTunes Store account, you should see a Purchases link now under the Quick Links header. That's the only part of iCloud active at this time.
Regards.

EBS(SSL enabled) URL 12.1.3 cannot display web page though apps services are up

Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S: Sun Solaris SPARC 64 bits 5.10
EBS URL 12.1.3 cannot display web page though apps services are up. This target instance is SSL enabled and cloned instance. Autoconfig runs successfully on both the tiers.
1 DB node and 1 apps Node(forms,Reports,CM,Web).
DB Tier Autocofig:
Updating rdbms version in Context file to db112
Updating rdbms type in Context file to 64 bits
Configuring templates from ORACLE_HOME ...
AutoConfig completed successfully.
$
Autoconfig Apps Tier
Configuring templates from all of the product tops...
        Configuring AD_TOP........COMPLETED
        Configuring FND_TOP.......COMPLETED
        Configuring ICX_TOP.......COMPLETED
        Configuring MSC_TOP.......COMPLETED
        Configuring IEO_TOP.......COMPLETED
        Configuring BIS_TOP.......COMPLETED
        Configuring AMS_TOP.......COMPLETED
        Configuring CCT_TOP.......COMPLETED
        Configuring WSH_TOP.......COMPLETED
        Configuring CLN_TOP.......COMPLETED
        Configuring OKE_TOP.......COMPLETED
        Configuring OKL_TOP.......COMPLETED
        Configuring OKS_TOP.......COMPLETED
        Configuring CSF_TOP.......COMPLETED
        Configuring IGS_TOP.......COMPLETED
        Configuring IBY_TOP.......COMPLETED
        Configuring JTF_TOP.......COMPLETED
        Configuring MWA_TOP.......COMPLETED
        Configuring CN_TOP........COMPLETED
        Configuring CSI_TOP.......COMPLETED
        Configuring WIP_TOP.......COMPLETED
        Configuring CSE_TOP.......COMPLETED
        Configuring EAM_TOP.......COMPLETED
        Configuring FTE_TOP.......COMPLETED
        Configuring ONT_TOP.......COMPLETED
        Configuring AR_TOP........COMPLETED
        Configuring AHL_TOP.......COMPLETED
        Configuring OZF_TOP.......COMPLETED
        Configuring IES_TOP.......COMPLETED
        Configuring CSD_TOP.......COMPLETED
        Configuring IGC_TOP.......COMPLETED
AutoConfig completed successfully.
$
---------------------------------+--------------------+---------+---------
ias-component                    | process-type       |     pid | status
---------------------------------+--------------------+---------+---------
OC4JGroup:default_group          | OC4J:oafm          |   10466 | Alive
OC4JGroup:default_group          | OC4J:forms         |   10425 | Alive
OC4JGroup:default_group          | OC4J:oacore        |   10062 | Alive
OC4JGroup:default_group          | OC4J:oacore        |   10061 | Alive
OC4JGroup:default_group          | OC4J:oacore        |   10060 | Alive
OC4JGroup:default_group          | OC4J:oacore        |   10059 | Alive
HTTP_Server                              | HTTP_Server        |    9993 | Alive
adopmnctl.sh: exiting with status 0
grep -i s_active_webport $CONTEXT_FILE
      <activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
Could anyone please advise what's wrong here. Why URL is not being accessible.
Thanks for your time
Regards,

Yes. We are using SSL in all te instances. Please see the comparison between the working and non-working instance
Source Instance(Working instance)
$ grep s_webssl_port $CONTEXT_FILE
                <web_ssl_port oa_var="s_webssl_port" oa_type="PORT" base="4443" step="1" range="-1" label="Web SSL Port">4508</web_ssl_port>
$
$ grep -i s_https_listen_parameter $CONTEXT_FILE
                        <httpslistenparameter oa_var="s_https_listen_parameter">4508</httpslistenparameter>
$ grep s_active_webport $CONTEXT_FILE
                <activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
$
$ grep -i s_enable_sslterminator $CONTEXT_FILE
                        <sslterminator oa_var="s_enable_sslterminator"> </sslterminator>
Target Instance(This does not work)
$ grep s_webssl_port $CONTEXT_FILE
      <web_ssl_port oa_var="s_webssl_port" oa_type="PORT" base="4443" step="1" range="-1" label="Web SSL Port">4519</web_ssl_port>
$
$ grep -i s_https_listen_parameter $CONTEXT_FILE
         <httpslistenparameter oa_var="s_https_listen_parameter">4519</httpslistenparameter>
$
$ grep s_active_webport $CONTEXT_FILE
      <activewebport oa_var="s_active_webport" oa_type="DUP_PORT" base="8000" step="1" range="-1" label="Active Web Port">443</activewebport>
$
$ grep -i s_enable_sslterminator $CONTEXT_FILE
         <sslterminator oa_var="s_enable_sslterminator"/>
Any suggestions?
Thanks,

Itunes will not install as IE link "cannot display web page"

I have been having problems with downloading podcasts and iTunes updates. So I followed Apple support suggestions including removing and (trying) to reinstall iTunes. However every time I hit the link for the download it takes me to a small pop up window with the address shown below, which does not load and tell me that "Internet Explorer cannot display the web page"
Arrhh Help anyone?!?
http://appldnld.apple.com/iTunes10/061-8246.20100901.Zxsew3/iTunesSetup.exe

System: Win7x64
Turn off ZoneAlarm.
“Run as administrative” Firefox.
I then went to the following install page which works:
http://www.adobe.com/software/flash/about/
It installed.
The following install page does not work:
http://get.adobe.com/flashplayer/
The following thread discusses the problem with http://get.adobe.com/flashplayer/ download.
Install Flash Plugin Manually in Firefox on Vista
With so many Firefox users, Adobe needs to fix the http://get.adobe.com/flashplayer/ download for Win7 users.

Receive ping throw WRT54G setup but cannot display web-pages.

Hi
I have a WRT54G router, connected to the same DSL modem for 4 years and everything was fine till last week. Since last week, i cannot display any web pages, despite the fact that i am connected to my ISP (it was checked with there support team).
I have 3 different laptops and 1 desktop with different browsers and different OS (XP, VISTA) on them and same antivirus (AVAST!).
I receive pings from all the laptops and desktop to the router (ping 192.168.1.1), which mean that they connect probably to the router
I was able to receive ping from different websites throw the router setup (192.168.1.1) under "Administrator" tab and then under "diagnostic" tab, But I cannot display any web pages.
Does any one might know what may be the problem?
Thank you.

Thank you for the quick respond.
I connect the computer directly to the modem and it work just fine.
When I ping throw command prompt in the computer (connected to the router) I receive the next massage "bla bla bla o recevie bla bla 5 packet loss or something".
I was able to receive ping from different websites throw the router setup (192.168.1.1) under "Administration" tab and then under "diagnostic" tab.
The problem was solved yesterday by updating the firmware and reseting the router with the reset button.
Very wired.
Anyone have any idea what may was the problem?

Web dynpro abap cannot display web page

Hello
when running Test in se80 on my web dynpro application the browser says it cannot display the web page.
1. the url of the wd application is http://<hostname>.domain.ext:8000/sap/bc/webdynpro/sap/<component name>
2. rz10 says that profile NSP_DVEBMGS00_<hostname> has icm/host_name_full = <hostname>.domain.ext
3. rz11 says that icm/host_name_full = <hostname>.domain.ext
4. smicm says that icm/host_name_full = <hostname>.domain.ext
5. in etc/hosts on vista 32bit version 6002 I have put:
127.0.0.1       localhost
127.0.0.1       <hostname>.domain.ext
10.10.0.10      <hostname>.domain.ext
<empty line>
I also have
SAPGLOBALHOST                              <hostname>
rdisp/mshost                                <hostname>
and no values at all for
SAPLOCALHOST
SAPLOCALHOSTFULL
in the profiles.
The following works:
http://localhost:50013/sapmc/sapmc.html?SID=NSP&NR=00&HOST=<hostname>.
Can anyone help me? I read that many of you have solved this but, you see, I do not understand what you have done.

Setting icm/host_name_full to <hostname>.domain.ext in rz10 in profile NSP_DVEBMGS00_<hostname> means:
1) I can no longer see my web dynpro view layout in se80 - instead of the view layout I get a browser screen that says the page cannot be displayed;
2) I get the same browser screen saying the page cannot be displayed when running the wd application test.
If I remove that parameter in rz10 then:
3) I can see and work with my view layouts in se80;
4) I get a 500 rabax state error when I do the wd application test;
5) I can do a successful wd application test by changing the url manually in the browser from <hostname>:8000 to localhost:8000 ... as in
http://wiki.sdn.sap.com/wiki/display/BSP/FullyQualifiedDomainName(FQDN).

Browsers cannot display web pages on HD TV

Hello all.
Firstly let me start by saying I used to build and fix computers so I have a good idea about solving tech problems, but this one has me stumped! Running snow leopard on Mac Mini. Connected Mac Mini to HD TV VIA HDMI cable as using VGA gave out of range signal.
Anyway the issue is that any browser will not work in any other resolution than 420 P (TV can go to 1080)
Now, I completely reformatted the Mac and on first use it defaulted to 720p mode and browser worked (yay!)
However, as soon as the resolution is altered, no browser will work in any other mode than 420p - infact I only have to get display preferences up and not alter anything and it stops working in 720p and other resolutions.
I have pinged/tracerout etc and the net is NOT dropping out so that is not the issue. The issue seems to be some video related problem, because if I delete the windowserver.plist and configuration preference files, it again boots up at 720p (which is the default for the HD tv, but if either display preferences are viewed, or the computer is restarted, that's it, the browsers stop working.
When trying to load an address, the blue colour in the address bar which shows how far a page is loading is about a quarter of the way, it actually picks the website up because the name at the top will show (for example (welcome to facebook.com) ) however, nothing is displayed, it just tries continually to display a page but it can't.
There is no timeout message, so it IS connected to the website, just not displaying the contents (the browser stays white)
I have searched on the net and found one person with this issue and no resolve. Has anyone any ideas what else I can try to resolve it?
Thanks

I assume this is a wireless network, though you didn't say. What might be happening is that the mini is on the ragged edge of wireless reception. Adding extra electromagnetic interference from the TV operating at a high pixel clock is pushing reception over the edge to where it stops working.
If that's true then you either need to try and reposition the mini further from the TV and closer to the wireless access point, or else switch to a wired connection to the network.

IE browser and Web Cache and SSL - Internet Explorer cannot display the web page

When using IE8, IE9, or IE10 with Web Cache and SSL certain pages which display a lot of data returns the error - "Internet Explorer cannot display the web page."
if we eliminate SSL but continue to use Web Cache, the error does *not* reproduce & If we eliminate Web Cache altogether the error again does *not* reproduce. The error is only reproducible when we use SSL with Web Cache and if we use IE and we access *large* pages. The error is not reproducible with Firefox or Chrome. This is a Web Tier 11.1.1.7 installation with WebLogic 10.3.6 & Red Hat Enterprise 5 Linux x86-64
Event_log shows below errors.
[2013-06-13T16:34:35-04:00] [webcache] [NOTIFICATION:1] [WXE-09002] [logging] [ecid: ] Generated by Oracle Web Cache on Thu Jun 13 16:34:35 2013 - Build 11.1.1.7.0 130113.0721
[2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-08513] [logging] [ecid: ] Cache server process ID 4469 is starting up.
[2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-09612] [main] [ecid: ] Oracle Web Cache 11g (11.1.1.6), Build 11.1.1.7.0 130113.0721
[2013-06-13T16:34:37-04:00] [webcache] [NOTIFICATION:1] [WXE-13002] [config] [ecid: ] Maximum allowed incoming connections are 1000
[2013-06-13T16:35:00-04:00] [webcache] [NOTIFICATION:1] [WXE-09441] [stats] [ecid: ] DMS enabled
[2013-06-13T16:35:28-04:00] [webcache] [NOTIFICATION:1] [WXE-12209] [cluster] [ecid: ] A 1 node cluster successfully initialized
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ] The following Oracle Web Cache internal files are pre-populated to the cache: [[
        /nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_static_.html
        /nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_static_.html
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ] [[
The following Oracle Web Cache internal files are pre-populated to the cache: [[
        /nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_checkserviceavailability_.html
        /nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_checkserviceavailability_.html
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09608] [main] [ecid: ] The cache server process started successfully.
[2013-06-13T16:35:29-04:00] [webcache] [WARNING:1] [WXE-12104] [utl] [ecid: ] Oracle Web Cache process has page faulted
[2013-06-13T16:44:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55145
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55144
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55148
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
Any help or suggestions are greatly appreciated
Tnx a lot,
Lokesh

Hello ,
Try Below Workarounds:
Workaround 1:
Open Central Admin
àApplication Management à
Configure Alternate access mapping-->Edit your web application zone and add your server name in Intranet zone. So default can be serverIP and intranet could be servername.
Workaround 2:
Might be there is some issue with DNS and try to check that WebApplication is pointing to correct IP or not.
Also try to access your Sharepoint site using ip Address .. If you still gets error Kindly share the logs ..
Best
Regards Kuldeep Verma
Please remember to click "Mark As Answer"
if a post solves your problem or "Vote As Helpful" if it was useful.

"Internet Explorer Cannot Display the web Page

on August 7th
I purchased a brand new computer that has
Vista Home premium on it,
To date I have not been unable to open this program.
I have been looking for help ever since,
I have been all over the net, I have tried
Lenovo sites.
I tried to call Lenovo, unfortunately I got no help there,
as I am deaf.
I looked through this site, in the hope that someone
who might have experienced this can help.
The Welcome center comes up when I start the Computer.
when I click on Internet explorer this is what I get.
Internet Explorer Cannot Display the web Page"
Most likely Causes:
*You are not connected to the Internet.
* The web site is encountering problems.
* There might be a typing error in the address.
"What can you try"
'Diagnose Connection Problems"
I did this and this is what I got.
Windows did not find any problems with this
Computer's network connection.
I tried more suggestions, and got more of the same.
I tried everything that looks promising, to no avail;
Please help if you can, it would be much appreciated;
Regards
Victoria
Lenovo 3000 H210 53552p desktop
Vista home Priemium 64

Victoria,
There are a few reasons that the error may come up. The first thing that I need to ask is when you say "I have been all over the net, I have tried Lenovo sites.', is this on the new computer? (i.e.. You are able to browse the internet, but get the error every time you initially launch Internet Explorer)
If so, the likely issue is that the particular web site that your home page is set too is invalid or is encountering problems.
Dennis

Safari Message: "Internet Explorer Cannot Display the Web Site" ?!?!?

Safari is running strangely on my new MacBook Pro. It has decided to NOT automatically add .com
when I type an address ..... THEN, when it can't find the website I get the message
"Internet Explorer Cannot Display the Web Site". ***.
Could the IE I am using when I'm using Windows XP (via Bootcamp) have corrupted Safari somehow?
Ideas, please! Thanks.

I found that the DNS settings in system prefs> networks > advanced had been mysteriously changed to something rather "foreign". An archive and Install solved the problem. Did your client happen to install a program called "Glim" (a Safari "enhancer"). That's our suspect.

I am trying to download the newest Itunes to windows 7. I did have a previous version that I used the control panel to delete. When I click on download, I get a small partial window in the upper left corner showing Internet Explorer Cannot Display the Web

I did have a previous version of Itunes and Quicktime that I used the control panel Uninstall to remove. When I do the download, I get a small window in the upper left saying Internet Explorer Cannot Display Webpage. It is trying to get to ....itunes64setup. I did check to see that all old Apple directorories, etc have been delete. Help!

Okay. Let's see if you've acquired some kind of restriction for the download site. These settings checks/changes apply to the IE downloads, so we'll be trying to use IE again.
Head into your Internet Options control panel, and click the Security tab. Click Restricted Sites.
Check to see if the following website is listed as a restricted site:
appldnld.apple.com.edgesuite.net
If it is, remove it from your list of restricted sites and try another download.
If still no joy, head back into the security tab of the Internet Options control panel. Click Trusted Sites this time. Click the "Sites" button.
Add appldnld.apple.com.edgesuite.net as a trusted site. Uncheck the "Require server verification" box. Now click OK and try another download.

Internet Explorer cannot display the webpage error urgent!

Hi,
I have created a OAF page. am displaying some report data in the page. The VO query is executing more thatn 20 min to get the records after tuning.
Now my problem is, am getting the error "Internet Explorer cannot display the webpage" in 10 mins after the VO query execution started. However, the DB session for this query is still executing at the backend and I am unable to get the same OAF page until the DB session completes.
Could you please help me in this?
Thanks,
Raja.

Raja,
There are two options here :
1) The correct one is to go via concurrent program , because as per web standards a web page should not take max of 3-4 minutes to render.
2) If you still wanna go via your present approach, you need to set profile ICX:Session Timeout which specifies Maximum idle time for the Oracle Applications user session(specified in minutes).
--Mukul

WRT300N v1 Internet Explorer cannot display the webpage

An intermittent problem occurs where occasionally during browsing the web I'll get an Internet Explorer "cannot display the webpage" and then I reload the page and often it works on the reload. The problem is very frequent and so nearly every webpage I try to open I have to reload in order to access it.
A temporary fix is unplugging the WRT300N v1 and plugging it back in. For a while, it works fine, but eventually the problem creeps up again.
I have firmware v 1.03.3
I've got two laptops, one Mac running OS 10.x and one Dell running Vista. I also have a desktop PC running XP. The two laptops use the wireless connection. The PC uses a wired connection. All 3 computers experience this same problem browsing web pages.
I've read the forums and mostly I've seen people talking about problems with the WRT300N v1 as far as the wireless connection, but this time I'm having issues even with the wired connection, so I feel that this issue isn't addressed, or at least I haven't found where it was addressed.
How do I fix this issue permanently?

I too am having the same problem. I used another system with IE7 installed and found that many sites that were "unable to be displayed" were accessed with IE7 on a differant computer system running Windows XP.
I realize it could be a router thing as well....but after i went through all the tech help i could find online it still did not solve the problem. I decided to work it out myself.
I found my solution when trying to go to sites with mp3 files on them. Thats when i discovered that with Windows Vista I had to manually select what program applications would be used to perform IE7 features (webpage content) in order for the pages to load properly.
To do this in Windows Vista - just go to Start / Program Defaults / Set Program Access and defaults From there you can select which programs to open if IE7 cant handle the file extention on its on. That was my problem all along.
You may have to go as far as setting your file associations in Windows Explorer. Windows Vista had set the file extension .php to open with Windows Photo Gallery.
I am still going through all the file types and finding file extentions that are configured wrong within Windows Vista.
UPDATE: I had problems opening webpages from links from online searches that were within various forums and also on websites that required a login but popup a separate window to login to. I don't know if you have the same problem with these sites.
I uninstalled a Windows Update (kb927143) and can now access those. I know this could be risky but I still have my firewall and antivirus running. Until IE7 is fixed its the only choice I have.
To do this in Vista....go to Control Panel ... Programs and Features...then click view installed updates. You will find it there if you have it installed. From there you can uninstall it.
Hope this helps you to solve your problem.
Message Edited by nannahawktx on 08-27-2007 09:02 PM

Internet Explorer Cannot Display This Webpage

Hi,
My issue is that when ever user is clicking link or submit a form, sometimes instead of directing to a new page, it will show the internet explorer error page 'Internet explorer cannot display this webpage'. I didnt find any error message in the log in cf admin as well as IIS admin. Then I checked with a simple HTML page which refreshes in every 3 minutes. I found that this page is also showing the same issue. So I think the issue is not related to Coldfusion. Still the issue persists. So does anybody have any idea about this? Please advice. Thanks in advance.
The details are: And also the application is hosted in virtual machine.
Server Product
ColdFusion
Version
9,0,0,251028
Edition
Standard
Serial Number
Operating System
Windows 2003
OS Version
5.2
Adobe Driver Version
4.0 (Build 0005)
JVM Details
Java Version
1.6.0_17
Java Vendor
Sun Microsystems Inc.
Java Vendor URL
http://java.sun.com/
Java Home
D:\ColdFusion9\runtime\jre
Java File Encoding
Cp1252
Java Default Locale
en_GB
File Separator
Path Separator
Line Separator
Chr(13)
User Name
SYSTEM
User Home
C:\Documents and Settings\Default User
User Dir
D:\ColdFusion9\runtime\bin
Java VM Specification Version
1.0
Java VM Specification Vendor
Sun Microsystems Inc.
Java VM Specification Name
Java Virtual Machine Specification
Java VM Version
14.3-b01
Java VM Vendor
Sun Microsystems Inc.
Java VM Name
Java HotSpot(TM) 64-Bit Server VM
Java Specification Version
1.6
Java Specification Vendor
Sun Microsystems Inc.
Java Specification Name
Java Platform API Specification
Java Class Version
50.0

Seems like an issue with the web server or, perhaps, even your browser. To start with, make sure you have followed the steps for configuring IIS in ColdFusion 9. Next, make sure the MIME type for HTML files in IIS 6 is text/html, not text/htm.

IE + SVG = "Cannot display XML page" ?

Dear friends,
   I am from Taiwan. I have a question about SVG display on IE.
   I have a very simply SVG file as the following code. I installed Ferdora R12 with apache web server (192.168.0.8) inside my company.
I installed Tomcat 6.0 on my PC(192.168.0.100, window 7 with IE8.0). I put this SVG file on Fedora, and I can see the vector graphs through
Chrome and Firefox, but not IE(already installed SVG viewer, with the error message as following). I put this SVG file on my PC, I can see the vector graphs by IE, Chrome and Firefox through Tomcat or opening file directly. I even put this SVG file on the web server of my company, and vector graphs can be displayed well through all of IE, Chrome and Firefox.
The problem seems only happen in the situation "Fedora R12 + IE". Do you have any idea of this problem? I really need your help.
Thank you.
======= Code =============
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.//EN"
"http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
<svg id="svg00" version="1.1" xmlns="http://www.w3.org/2000/svg" >
<svg id="svg01" x="0" y="0" width="654.1" height="654.1" version="1.1" xmlns="http://www.w3.org/2000/svg"
xmlns:xlink="http://www.w3.org/1999/xlink">
    <a xlink:href="http://www.w3.org//Graphics//SVG//Overview.htm8">
        <rect x="10" y="10" width="100" height="30" rx="10" ry="10"
              style="fill:lightgrey"/>
        <text x="30" y="30" font-size="12">Click here</text>
    </a>
    <a xlink:href="http://www.ibm.com//developerworks/">
        <circle cx="100" cy="100" r="50" style="fill:grey"/>
        <text x="80" y="100" font-size="12">Or here</text>
    </a>
    <a xlink:href="http://www.ibm.com/" target="new">
        <polygon
              points="60 160,165 172,180 60,290 290,272 280,172 285,250 255"
              style="fill:dimgrey"/>
        <text x="160" y="200" font-size="12">Or even here</text>
    </a>
</svg>
</svg>
==========================
The error message is in Chinese, but I translate it as possible as I can.
====== Error message ==========
Cannot display XML page
Cannot use style table (or form) to view XML input. Please correct this problem and reload this page, or try again later.
Unidentified error with processing resourse
There is something wrong with 'http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd'
=============================

Hi,
The string is not correctly formed ( a quote and a concatenation ) :
Your url :
v_url:=nvl(v_rep_port,'http://'||v_rep_HOST ||':'||v_rep_port||')||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_rep_svr;
The Correction :
v_url:=nvl(v_rep_port,'http://'||v_rep_HOST ||':'||v_rep_port)||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_rep_svr;
Hope it helps
Mohamed Dadi

Explorer Cannot Display Web Page Desk Top 3000J11573​87-A11

Similar Messages

Maybe you are looking for

Explorer Cannot Display Web Page Desk Top 3000J1157387-A11