Explorer doesn't open on WRT54G2 wireless

I have a HP laptop. Router installed OK and works well when wire conected. On wireless though Explorer can't open any site. Windows show conection as active and OK.

Well try upgrading the firmware of the router & keep on holding tightly
the reset button in such a way that power light is blinking on the
router & then do a complete network power cycle i.e., unplug the power
cables from the modem & from the router & then plug in the power cable
to the modem first once all the lights are solid green you could plug
in the power cable to the router & check out it will definately work!!
Also, try forwarding the ports numbers 110, 25, 447-447 & you will be able to resolve your issue.

Similar Messages

Windows 7 Internet Explorer doesn't open (no error shown)

With the latest set of updates, around 4-5 days ago, a new problem developed which I haven't seen discussed anywhere. Internet explorer doesn't load up when I click on it's icon. The hard disk clunks but no explorer window appears. No error is displayed. Very odd. Very occasionally it does load up, perhaps once a day, but then stops loading again after a few minutes. Anybody got an idea what's happening?
Dan
Windows7 64 bit / office 2007Daniel West
NHS / Home User
Dell XPS 710

Based on my known, a corrupt add-on could cause the problem. I have following suggestion.
Run IE without Add-ons
=============================
1. Click Start, All Programs, Accessories, System Tools, Internet Explorer (No Add-ons).
2. Visit website in this IE and test the issue. .
If still cannot be run, please try to run it as administrator.
Hope it helps.

Re: Satellite L500 - Internet Explorer doesn't open

Hi,
I have a Satellite L500, which is a new one with Windows 7 home premium configured.
When I logged in for first time, every thing worked perfectly and I was able to browse internet. After shut down, next day I tried to login and tried to open IE, I was not able to open IE. IE is not opening. Also, Windows media player is also not opening.
I recovered Windows 7 once more. But the above happened again.
Please any one help me ASAP.
Regards,
Anoop

Hi,
Thank you for the reply.
1) Do you get an error message if you try to open Internet Explorer or do nothing happen?
*no error message happens when i clicked on IE*
2) Have you also tried another browser like Firefox?
*Firefox also not opening*
3) Did you install any software after recovering Windows 7?
* Yes I installed nero9 after recovering Win 7*
* I un-installed that, but still IE and FF not opening*
4) Did you use the HDD recovery or how did you exactly recover Windows 7?
*I reoved using the recovery DVD's which I created*
Please let me know your comments
Anoop

Windows explorer doesn't open LLB files.

was running LV6, 6.1, now 7.0 on win98 machine.
recently ran microsoft regclean and now I have no more support for
viewing inside .LLB files through windows explorer. Attempting to
re-enable this through LabVIEW/tools/options does not help.
Any hints?
thanks
paul

It appears that running regclean has busted this function by
removing 7 entries from the system registry.
Running ADD/REMOVE PROGRAMS/National Instruments/LabVIEW/repair,
repaired the problem, and returned Windows Explorer support for LLB
files, unfortunately it also removes the LabVIEW registration name and
Ser#, but this can be easily found (and repaired) in ...
HKEY_LOCAL_MACHINE
SOFTWARE
NATIONAL INSTRUMENTS
LABVIEW
7.0
in the system registry and values typed in for Registered Owner & Serial
Number fixes the 'unregistered' on the splash screen.
back to the LLB Explorer support problem,
What I actually did was to,
1) run regclean to make sure there wasn't any crap in the registry.
2) fix the LLB Explorer support
problem by 'repairing' LabVIEW from the
ADD/REMOVE PROGRAMS system function.
3) run regclean
4) rename the 'UNDOwhatever.REG' file (in regclean directory) to 'Fix
LabVIEW LLB Support.reg'
5) Finally, double click 'Fix LabVIEW LLB Support.reg' to put the data
back into the system registry.
In this way, if I ever run regclean again and it removes the LLB
file support in Windows Explorer, all I have to do is run 'Fix LabVIEW
LLB Support.reg' instead of repairing (re-installing) LabVIEW.
I did this in on a Windows 98 system with LabVIEW 7.0. Your milage may
vary with other platforms or applications.
Paul wrote:
> was running LV6, 6.1, now 7.0 on win98 machine.
> recently ran microsoft regclean and now I have no more support for
> viewing inside .LLB files through windows explorer. Attempting to
> re-enable this through LabVIEW/tools/options does not help.
> Any hints?
> thanks
> paul
>

Zen V Media Explorer Doesn't Open; Proposed Suggestions Unhelp

I have had my Zen V for a little more than a year, and though scuffed, it's still in good condition from being gently handled and used rarely. As of the last two months or so, the Media Explorer program necessary to get new music to the player has been tempermental -- rarely connecting properly, and often closing down before media is fully transferred. Now it no longer connects AT ALL. I can offer no explaination for why this is happening: I thought it could be Vista, but when I tried to load it up on an older XP computer, the same results occured. I have read the FAQ and have tried all USB ports. The cord is not damaged, and the Zen charges (though that alone is often a whole other problem tacked to a growing list of reasons why I will never buy another Creative product again). I tried to add music via RealPlayer to no avail. Links to supposed "solutions" on the website are often broken. Because my warranty has expired, I would have to pay for direct customer support which I suspect will be as effecti've as diddly at this point. To vent just a little, I am utterly fed up with the multiple problems this brand has given me. If anyone has any helpful suggestions that might get me somewhere, I'd be extremely grateful. I'm willing to try anything. Otherwise, I well and truly feel that I have basically sent $100 dollars down the drain.

I have the same problem... The only way I've found to close it so far is by using the task manager.

Hi,I can't open any of google websites,be it gmail,google,orkut etc these sites doesn't open in my dektop whether it is firefox or Internet explorer

Hi,I can't open any of google websites,be it gmail,google,orkut etc these sites doesn't open in my dektop whether it is firefox or Internet explorer etc

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Safari doesn't open and doesn't work at all!!!

Since three days ago, I can open safari at all. I just bounces twice and then stops. I have already tried the solutions offered in other threads which complain about similar problems with safari but safari remains troubled. I am not good at this. Please can an apple expert tell me how to fix safari step by step.

Please somebody answer ! Safari doesn't open at allg and there's not any messages from my Mac telling me what's going on!
I have tried to uninstall safari but i couldn't. Should I reinstall everything? Can i uninstall safari and get a new copy of safary?
MS Explorer 5.2 still works, but I prefer safari as i have all my bookmarks in it.
Any suggestions?
Please : )

Hp dvd 1040i Disk tray doesn't open half the time

My disk tray is awful to try to open. I press the button, activity light, lights, but the tray doesn't open. Press and hold the button and the same thing happens. I have to go into Windows Explorer (XP sp3) and right click the drive and select "eject" to get the disk tray open. About 10% of the time the button described above does work, 90% not.
I noticed in my device manager the drive is described as "HP DVD WRITER 1040d". Did I get the wrong driver with this drive? I cannot find any DVD support on the HP site.

I wanted to add that the "pin method" of opening the drive is also requires multiple tries and seems no more successful overall than just pushing the button repeatedly. I actually have the best luck getting them to open by applying leverage with the tip of a knife as I push the button.

After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work. I have to set the default program for .pdf's to Acrobat Reader inorder for the previewer to work.

After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work. I have to set the default program for .pdf's to Acrobat Reader in order for the previewer to work.
Can anyone recommend a solution?

If I set the default program for viewing PDF as Acrobat XI Pro the a PDF file will open with Acrobat XI Pro, but in Outlook I will get a white screen and the information bubble "This file cannot be previewed because there is no previewer installed for it" and in Windows Explorer I get a white screen in the preview pane.
My Acrobat version is 11.0.10
I am running Windows 7 Professional with Service Pack 1
My Internet Explorer is Version 11.0.9600.17691
Update Versions 11.0.17 (KB3032359)
I am running Microsoft Office 2013

How setup a WRT54G2 Wireless Router to connect to a SmartPhone to Retrieve E-Mail

I have a new WRT54G2 Wireless Router and I can Surf the Web on my Smartphone via the Router but I am unable to retieve my E-Mail like I used to do with my old Wireless Router.
Anyone know what setting I need to change on the WRT54G2 Wireless Router?

Hi Richard,
Welcome to the community forum!
Did you check the mail setup in your smartphone to see if anything changed? Check if the incoming and outgoing mail servers are correct.
A software update might have reset the settings.
If all looks good in the smartphone mail setup, do you recall if you had to open ports in the old router to make email work?

Internet Explorer won't open since installing Creative softw

I was asked to look at a friend's PC because she is having trouble since installing the software that came with her Creative Zen MP3 player.
Whenever we tried to open Internet Explorer, Microsoft Frontpage opened with a message about installing softwatre (Frontpage extensions?) though I don't think she has Frontpage on her PC.
I managed to get it back to normal by the use of a System Restore but then the fault reappeared after reloading the Creative software and we had then lost that System Restore point (should have saved a new one!).
I did see something with a GOOGLE search which seemed to indicate that others had this problem but could not get the full details as the message had disappeared.
I would be grateful for any suggestions on how to get Internet Explorer back.
MBMessage Edited by JMB23 on 0-25-2006 :56 AM

Satellite C55-A5388
Internet Explorer is here.
C:\Program Files\Internet Explorer\iexplore.exe
What happens when you try to execute iexplore.exe from there?
If it doesn't appear to open, start Task Manager (Ctrl + Shift + Esc). On the Processes tab, sort them by name and see if iexplore.exe is listed.
If you've done Windows updates, you probably have v11.
-Jerry

Launcher doesn't open any of the options

I use photoshop elements 9 and have not recently used it. The launcher works fine, but when I click 'Edit' or 'Organise' it doesn't open anything. Help!

Hi,
Which operating system are you running on?
If you are using Windows, try using Windows Explorer to find the following files and double click on them to load the main programs. [ignore the (x86) part if on a 32bit operating system].
Organizer: "C:\Program Files (x86)\Adobe\Elements 9 Organizer\PhotoshopElementsOrganizer.exe"
Editor: "C:\Program Files (x86)\Adobe\Photoshop Elements 9\PhotoshopElementsEditor.exe"
Brian

Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

My Macbook sometimes doesn't connect to my Wireless N network

I had my topcase replaced by apple a few weeks ago. Since then I've noticed my macbook SOMETIMES doesn't connect to my wireless N network (from my AEBS running on 5.8ghz frequency).
It's strange because most of the time it finds the network fine. But sometimes when i open the macbook up (awakes from sleep) it doesn't see the network (it's not available from the list of available networks). If i try to connect manually to the network when this happens i get a "connection timeout" message. If i turn off my airport connection off and then on with the macbook (thru the menu bar) it sometimes finds the N network. Sometimes that doesn't work, and i have to put the macbook to sleep and hope it finds the network when it awakes. Sometimes that solves the problem, but i may have to try it 3 or 4 times.
If i switch my AEBS to a mixed signal (supporting G) i don't have these problems, but i shouldn't have to do that, and i'm sacrificing wireless speed if i do that. I have a stable connection when it DOES find the network (it won't drop out and will be at full strength) but as soon as i put it to sleep i run the risk it may not find the network when it awakes.
As i said before i didn't notice this problem before I sent in the macbook to have the topcase repaired - is it possible the airport card was damaged? I was only running a N wireless network a week prior to submitting the macbook for repair, so i'm not positive that's it either.

There's a reason why some are less than energetic in answering your question: the "pinwheel of death" could mean a lot of things. To start off, you will need to use various utilities to coax your MBP into functionality:
1. Perform a Permisions Repair, and also Repair your disk on Disk Utilities. If this doesn't work, proceed to the next step.
2. Using a free utility like Onyx, clean your caches.
3. Using the free Kext Wizard, make sure your files are consistent and accurate.
4. Use OpenDNS by connecting to this link:
https://discussions.apple.com/thread/2478039?start=0&tstart=0
OpenDNS is a simple way of making your online experience faster and easier.
If these steps were successful, take the time to post here; others will profit from your experience. If you still don't have the answer, post...and we'll find the solution!

I use Firefox 3.6.3 on an Intel Mac. Download window doesn't open anymore

The download window used to open fine and I could check downloads. Suddenly it doesn't open. I found somebody with the same problem. http://www.help2go.com/Tutorials/Web_Browsers/The_Firefox_Download_Window_Has_Disappeared!.html They say delete the file called Downloads.rdf . In Windows Explorer, find your Firefox profiles folder:
C:\Documents and Settings\YourUserName\Application Data\Mozilla\Firefox\Profiles\xxxxxxx\ (xxxxxxx is a string of random letters and numbers).
However, I can't find the file in mac. I found this file
downloads.sqlite in Application Support - Profiles but I don't want to delete it without knowing first if it's the right file. Can someone advise me?

The download window used to open fine and I could check downloads. Suddenly it doesn't open. I found somebody with the same problem. http://www.help2go.com/Tutorials/Web_Browsers/The_Firefox_Download_Window_Has_Disappeared!.html They say delete the file called Downloads.rdf . In Windows Explorer, find your Firefox profiles folder:
C:\Documents and Settings\YourUserName\Application Data\Mozilla\Firefox\Profiles\xxxxxxx\ (xxxxxxx is a string of random letters and numbers).
However, I can't find the file in mac. I found this file
downloads.sqlite in Application Support - Profiles but I don't want to delete it without knowing first if it's the right file. Can someone advise me?

Explorer doesn't open on WRT54G2 wireless

Similar Messages

Maybe you are looking for