Explorer.exe slow and right clicking slow

Hi all,
I have Win 2012 with Terminal Server running and another Win 2012 DC.
In a TS session explorer.exe takes about 20 seconds to open and the same to right click and right click on desktop has similar lag..
When on the server i.e. not in a TS session explorer.exe has no delay.
This is on a local network with GB LAN.
All other activity in the TS sessions are very fast including databases etc.
I have used procmon and it displays many "name not found" entries however I'm not really sure how to interpret and there doesn't seem to be any huge time delays when set to include explorer.exe and is not success.
Event Viewer shows no events that I could associate with this slow behavior
Any ideas on troubleshooting?
Thanks

1. Login with other user ID and check,
2. If possible, Recreate user profile.
Also cross verify below checklists.
1. Check whether event ID : 2011 and 2012 event ID's are registering in event viewer.
2. Check IRPStack size limit, If all users are accessing at sametime, you may face this issue, That time you need to set correct IRPStack
3. Issue may be with high Handle count,
4. Identify the handle count which is more than 5000 and perform according to application.
Regards,
Manjunath Sullad

Similar Messages

Windows Server 2008 Explorer error when i right click on folder

Hi everybody.
I have installed a new Windows Server 2008 64-bit, update it to latest.
I have a problem that happens when i right click on a folder. The error only happens if i right click on a folder that has only 1 character long folder name. Doesn't matter if the name is for example: "1" or "a" or "f", the explorer.exe crashes and gives me
error:
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
image:
full error info:
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Explorer.EXE
Application Version:    6.1.7601.17567
Application Timestamp:    4d672ee4
Fault Module Name:    msvcrt.dll
Fault Module Version:    7.0.7600.16385
Fault Module Timestamp:    4a5bdfbe
Exception Code:    40000015
Exception Offset:    000000000002aa8e
OS Version:    6.1.7601.2.1.0.274.10
Locale ID:    1033
Additional Information 1:    f530
Additional Information 2:    f5308e7edca7281fd3c8f9f1fa48021a
Additional Information 3:    4a44
Additional Information 4:    4a44581c8f470fcc2cbc842e91755c88
The error happened to me on different pc before so it is not related to hardware. The problem happens also if i create folder on desktop, problem stays if i create a new account, the problem goes away if i rename the folder to at least 2 character long name
(for example: "1a", "de"), by slowly double click it. If i go to Start --> Computer --> Local Disk (C:) --> create New Folder with 1 character long name and than go to Organize, i can cut, but not do the same to paste the folder inside another location,
because the error happens.
I didn't install Visual Studio.
How to solve the problem ?

This is not the usual behavior of the windows Server.
Please perform the following things
1) Perform a clean boot
http://technetfaqs.wordpress.com/2009/05/18/how-to-clean-boot-in-windows-2008-server/
2) Go to the safe mode and try to perform a virus check using the malicious virus removal tool
https://support.microsoft.com/kb/890830/en-us
3) If none of the above helps then you should generate the dump file and analyze it to find the root cause of the problem which is not easy for the new users. How ever if you generate it and put it to the sky drive I will try to analyze and let you know
http://support.microsoft.com/kb/254649/en-us
http://www.arabitpro.com

My HP pavilion G6 notebook PC the touch pad works however not left and right click pads

Hi all, new here so go easy with me ) I have a new HP pavilion G6 notebook PC, the touch pad works however not the left and right click buttons? Checked in control panel and can not find a way of enabling them. Also unable to scroll down a file in the window without using the actual scroll down bar on the right of the screen...any solutions please?

Hi Sy,
First, download the latest Synaptics driver installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp53501-54000/sp53851.exe
Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall.
When this has completed, restart the notebook.
When windows has fully reloaded, open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Now follow the directions under the sub-heading 'Adjust horizontal and vertical scrolling' in the document on the link below to configure the scroll options as you require.
Configuring The ClickPad.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Lately when I try to right click it opens a new tab with recent searchs.I have to go back to the tab and right click again to get the options. How do i fix it?

When I try to right click now instead of getting the menu it goes into a new tab showing recent searches.I have to go back and right click again to get the menu and do what I wanted in the first place.Is there a way to fix this.This is really irritating.I like firefox but I'm ready to go back to Chrome. Thanks for any help.

You're right-clicking a link? I can't think of any setting that opens a blank tab when you right-click in a page. It's also strange that it would occur on the first click but not on the second click.
Does this affect all sites?
Are you expecting Firefox's context menu or the site's context menu?
One thing that comes to mind is overriding the site's own right-click handler by disabling scripts from capturing the right click. This is set under
orange Firefox button (or Tools menu) > Options > Content
To the right of "Enable JavaScript" is a button to access "Advanced" options. If it's checked, uncheck the box for "Disable or replace context menus".

How do I delete a song from my Itunes library? I follow the instructions and right click on the song and click delete from the drop down menu but, then it asks me if I am sure I want to hide this song in Iclouds? I dont even know what Iclouds is?!?! HELP!

How do I delete a song from my Itunes music library? I follow the instructions and right click on the song and then select "delete" as specified and my info claims at that point it will ask if I want to send this song to my trash bin, but, instead, when I try to delete the song, I get another window asking "are you sure you want to hide this song in iCloud? I don't even know what iCloud is?!?!? I don't want iCloud and just want to get rid of old songs!!! HELP ME!!!

Short answer:
Click Hide Song(s), it is what you wanted to do...
Long answer:
iTunes in the Cloud is a feature of your iTunes store account that allows you to redownload or stream your past purchases. When you delete a purchased track that is downloaded to your computer (like the first one shown here) you are asked if you also want to hide the song from iCloud. This would remove it from the computer and also stop it showing up with the iCloud symbol as the other tracks from that album (which are not downloaded) do.
If a track shows with the cloud symbol you can play (stream) it by double-clicking the title, or click the cloud symbol to download a local copy to your library. If you try to delete one of these tracks you get a slightly different message confirming that you want to hide the track. Clicking hide will remove the listing from the library and any other device that shows your past purchases.
Should you want to retrieve any item hidden in this way at a later date use Store > View My Account > iTunes in the Cloud > Hidden Purchases > Manage.
To hide all your previous purchases that are not downloaded to your computer use Edit > Preferences > Store and untick Show iTunes in the Cloud purchases.
tt2

Has anyone found a solution to sending mail to groups in Mavericks? I've been given 2 approaches - 1 to type user name group into address and the other to go to address book and right click on group. Neither are satisfactory. Does anyone have a solution?

Has anyone found a solution to sending mail to Groups in Mavericks? I've been given two solutions - neither are satisfactory. One is to type name of group into address line, the other is to go to address book and right click on group.

thanks a lot for your kind help... saved me a lot of time and effort, could not believe it at first that the process is so simple but once i followed the steps it worked fine. appreciate your help.

Then 'm selecting 3 points after camera tracker and right click them there is no SET GROUND PLANE in the list, can U help me?

Then 'm selecting 3 points and right click them there is no SET GROUND PLANE in the list, can U help me?

Quit farting around with the camera tracker. You're not nearly ready to handle it. Go here:
Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC)

2011 17" MBP TrackPad Left and Right Click Intermittent in Win7/64

A few weeks ago I installed Win7 Pro 64 via Bootcamp in a new 2011 MBP 17 (2.3gig). Since day one the trackpad left and right click buttons have been intermittent in Windows only.
For example, while surfing the web some clicks work, others don't, often have to repeat clicks to get it to work, then next time it will work the first time. This is not just a Safari problem, it happens in every program including the Finder.
I think it is a driver issue and Apple needs to get on the ball and fix the problem and send out an update (yes I have the latest version).
I saw where a guy had written drivers to address the problems with the low quality Apple drivers. His is called TrackPad+++ but it is bloated and I'd rather not install it nor should have to.
Anyone else having this problem or found a good solution? BTW an external USB mouse works great.

After a little bit of looking around i found my answer! Use the BootCamp Control Panel that you can call up by clicking on the boot camp icon in the notifications panel. There one can enable tap to click, dragging, and right click.

Untrusted forest and right click tools

I just installed right click tools and it's really a great tool. We manage clients in untrusted ad forest and right click tools doesn't work for them because of the authentication problems. Does anyone know is there something that can be done to bypass
this limitation?

Remember, the right-click tools are simply scripts that run in the context of the current user logged into the console and connect directly to the clients to perform their work. They are not part of ConfigMgr and do not use the ConfigMgr infrastructure
to communicate (because the ConfigMgr infrastructure never ever connects to client agents). Thus, every-thing the right-click tools do is subject to normal restrictions and for connecting to a remote system including authentication and authorization. And thus,
the account you are using must have the proper privileges and permissions on the target client system.
Jason | http://blog.configmgrftw.com | @jasonsandys

Trackpad won't move curser mouse does. Left and right click working fine

Hello everyone,
I have a problem. Out of nowhere my trackpad won't move the curser anymore. Connecting a USB mouse does. Left and right click are still working fine. Any ideas of how to fix it?
Thanks
Dave

Hey there DaveDaMac,
It sounds like your built in track pad is not responding at all, but your USB mouse works without issue. I recommend the troubleshooting in this article for you named:
Intel-based Mac notebooks: Troubleshooting unresponsive trackpad issues
http://support.apple.com/kb/TS1248
Try disconnecting the MagSafe connector from the computer and check the trackpad function. If the trackpad becomes responsive again, improper grounding may be the issue.
If a two-prong AC plug is being used with the power adapter, try using the three-prong power cable that shipped with your computer and plug it into a grounded outlet.
If the issue persists, make sure the third prong is present and do not use an adapter to enable the three-prong adapter to be used in a two-prong outlet. Note that the ground in the three-prong outlet may not be connected. This is common in older homes or buildings with replaced outlets. In these situations, the three-prong power cable will not improve trackpad responsiveness.
If a grounded outlet is not available, rest your palm on the palm rest when using the trackpad. This should enable the trackpad to function properly.
Thank you for using Apple Support Communities.
All the very best,
Sterling

I am trying to convert AAC to mp3. When highlight and right click it only offers to make copies in AAC. HELP!

I am trying to convert AAC to mp3. When highlight and right click it only offers to make copies in AAC. HELP!

Hello jepperdee,
Thanks for using Apple Support Communities.
For more information, take a look at:
iTunes: How to convert a song to a different file format
http://support.apple.com/kb/ht1550
To convert a song's file format
Open iTunes Preferences.
Windows: Choose Edit > Preferences.
Mac: Choose iTunes > Preferences.
Click the General button, then click the Importing Settings… button in the lower section of the window.
From the Import Using pop-up menu, choose the encoding format that you want to convert the song to, then click OK to save the settings.
Select one or more songs in your library, then from the File > Create New Version menu, choose one of the following (the menu item changes to show what's selected in your Importing preferences):
Create MP3 version
Create AAC version
Create AIFF version
Create WAV version
Create Apple Lossless version
Have a nice day,
Mario

How do I stop switching to a new tab when I highlight something and right click "search google"

So whenever a highlight a word and right click it to "Search Google for..." it switches to the new tab that just opened. How can I stop it? I've already tried going to Tools > Options > and disabling the thingie, but that only works for links that I open in new tabs. Not for the google searching.
So there any way to stop it?
Thanks!

Thanks - but I find it strange that so many options in Firefox that affect usability (sometimes it's the little things that matter) require us to ask in Mozilla Support, then find some hard-to-find setting in about:config!
While I'm glad this worked it's definitely NOT user friendly.

Realplayer plugin doesn't work (the tab to dl doesn't appear and right-clicking reveals no dl option either) after update to FF4?

I have updated firefox to 4.0.1, but the realplayer plugin doesn't work (the tab to dl doesn't appear and right-clicking reveals no dl option like it should either).
I have IE 9 too and the same videos tried in FF can be dl'd there but not with the new FF4, and i've checked the plugin against this page: http://support.mozilla.com/en-US/kb/Using%20the%20RealPlayer%20plugin%20with%20Firefox#os=win&browser=fx4, but it's exactly as it says it should be, but there is not dl tab appearing like normal.
I have also tried updating to the latest realplayer and there's no difference.
Any help would be greatly appreciated! :)

Restart your phone by holding the power and home button until the Apple logo appears. Be aware that some owners of iPhone 4 have had difficulty using WIFI after the upgrade.

Middle click and right click won't work?

Previously i used nightly but i uninstalled it due to it's unstable. When installing firefox, everything is ok. But i realize my middle click and right click won't work. I have check the "About:config" page and the "browser.tabs.opentabfor.middleclick" is "true". I try to reinstall it but no effects.
Please help. i can't open new tab or downloading images with this issues.

Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Left and right click at the same time?

Is there a way to get the magic mouse to do left and right click at the same time? Useful for well.. gaming.

Check out the free Magicprefs software. You can then assign different functions to different clicks. swipes, taps, etc. There is an option for a two finger click and one of those options is "hold both right & left". It's free so you have noting to lose.
HTH

Explorer.exe slow and right clicking slow

Similar Messages

Maybe you are looking for