? Export a pdf from my iPad

having trouble downloading a pdf from my iPad. I need to fill out a form for a job. The form opens in the email but won't upload or copy to pdf export any suggestions?

Hi thepurplerose,
Do you have the free Reader app for iOS installed on your iPad? If not, please start there. You can get it from the App store. Then, you can open that PDF file in Reader.
Best,
Sara

Similar Messages

Export to PDF from Infoview does not show correct data - CRS 2008

I have a problem where users attempt to export a report from the Infoview interface to a PDF. The report shows correctly in Infoview while in Crystal Reports format, but when the use exports the data, the data changes and shows different values. To troubleshoot, I have tried this on different clients - without a change in the result. I have also pulled the latest instance of the report from this history on the Central Management Console. Interestingly enough, the same thing happens when I export to a PDF from there as well. Any insight or help would be greatly appreciated. Thanks!

Hello,
I can't tell you offhand on what the issue is here, as various factors come into play.
Here are a few troubleshooting steps you can try:
- Try opening the report in Crystal Report designer and export to pdf from there. Does this work?
- Instead of viewing the report and export; schedule a report to PDF and check the results.
- there is currently a know issue in regards of certain formulas and using font type "arial Unicode MS" that gives incorrect export to pdf. Maybe alter the font used.. or see if you take out any questionable formulas and try again to export.
Regards,
Duncan

How to transfer iBooks books & PDFs from old iPad to new iPad?

(Well, it seems my title got truncated; originally it read: How to transfer iBooks books & PDFs from old iPad to new iPad?)
I've recently gotten an iPad Air to replace my previous iPad 2. I have a bunch of books and PDFs in iBooks on the old iPad, and want to transfer them to the new iPad.
A search of Apple Support informs me that anything I've purchased from iBooks can be downloaded at any time to any of my devices (works like Amazon's Kindle system, apparently), but nearly all the content I have in iBooks on the iPad I've downloaded from other sources, so it won't be in my iBooks Store account (I might have bought one book there).
I've also seen several instructions on how to copy all my data from the old iPad to the new via Backup & Restore, but that seems to require restoring the new iPad to factory setup, which would delete everything I have on it now – including a bunch more books I've gotten since I started using the new iPad. And I don't want to copy everything, only the books/PDFs (the new iPad has everything I want, except for the books).
Since there seems to be no way to transfer files directly from one iPad to the other, it seems it must be done via iTunes on my MacBook Pro (and I want to copy all the books/PDFs to the computer anyway). So I connected the iPad 2 to my MacBook Pro (OS X 10.9.4) and opened iTunes (11.3.1). Then clicked on the iPad's name in the sidebar to the left, and on Books below it. I see a list of the books on the iPad. I check the little boxes by all their names to select them (not sure if that's necessary, but it seems like a good idea), then click on the Sync button at the lower right, to the right of the bar at the bottom of the window with colored bands showing memory usage on the iPad. A message appears saying "The app 'iBooks' was not installed on the iPad '[name]' because the app could not be found."
But iBooks is already on the iPad; I have it open and see the list of books in it, which matches the list shown in iTunes. The message has a "More Information" button; I click that and it opens an Apple Support article titled "iOS: An app you installed unexpectedly quits, stops responding, or won’t open": "Learn what to do if you see one of these issues with an app you downloaded from the App Store on your iPhone, iPad, or iPod touch: The app unexpectedly quits; The app stops responding; You can’t open the app." But none of these apply; the iBooks app is on the iPad, and works fine there.
The article suggests: (1) Restart the App. I've done that, no help. (2) Restart your device. Done that, no help. (3) Update your device software and your apps. The iPad is running iOS 6.1.3, iBooks 3.1.3; not the latest versions, no, but I'd rather not update it to newer, bigger, more power-hungry versions if I don't have to. Is it that iTunes 11 doesn't work with iOS 6? I haven't seen this stated anywhere.
So instead I click the OK button on the message, but nothing further happens, so far as I can tell: None of the books/PDFs on the iPad (about 380MB) appear in iBooks on the MacBook Pro.
I click on "Books" in the row of words across the top of the iTunes window, and it shows me the single PDF presently in iBooks on the MacBook Pro. I click the box by "Sync Books", and a message appears: "Are you sure you want to remove existing music, movies, TV shows, books, and tones from this iPad and sync with this iTunes library?" Well, no, that's exactly what I DON'T want to do. I don't want to erase the 380MB of books and PDFs on the iPad and replace them with the single PDF now in iBooks on the MacBook Pro. I want to copy the books from the iPad 2 to iTunes, so I can copy them back to the new iPad Air (if, God willing, I can figure out how to do that without erasing the books now on the iPad Air).
I've been working with Macintosh computers for over 26 years. It's always been a fairly simple process to copy files from one computer to another. I don't want to "sync" all the data (address book, email, God knows what else) on the iPad with the corresponding information on the MacBook Pro – especially if that will erase everything on the iPad (which has information not on the MacBook Pro, e.g. 380MB of books). I just want to copy the books and PDFs in iBooks from the old iPad to the MacBook Pro, then to the new iPad, adding them to the books on the new iPad, so I don't lose anything.
Can anybody give me a clue?

How to Transfer Everything from an Old iPad to New iPad
http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Moving Content to a New iPad
http://tinyurl.com/qzk2a26
How to Transfer App Data and Game Saves from One iOS Device to Another
http://lifehacker.com/5891964/can-i-transfer-app-data-and-game-saves-from-my-iph one-to-a-new-ipad
How to transfer data from your old iPad to your new iPad
http://www.imore.com/how-transfer-data-your-old-ipad-your-new-ipad-air-or-retina -ipad-mini
Transferring your prepaid cellular data account depends on your carrier. AT&T lets you move it yourself when you go to Cellular Data in Settings and log into your account with your previous AT&T user name and password. For iPads with Sprint service, you can set up an account on the new iPad and contact Sprint Customer Care (888-211-4727 and go through the menus) to deactivate the old plan and get credit for unused service. For Verizon, call the company’s customer service number for mobile broadband support (800-786-8419) and ask to have your account transferred.
 Cheers, Tom

Exporting to PDF from PageMaker 7.0 in Classic

Since upgrading to 10.4 I have been unable to export to PDF from PageMaker 7.0.1. Adobe tech support says there is a problem with the Adobe Postscript driver. I have downloaded and installed a new Adobe PS driver but still get a message that says Adobe PS cannot be used because of an internal error. There is a code (-30581). Anybody having this problem?

Did Adobe say your copy might be corrupt, or there was a general incompatibility between AdobePS and your Classic version, or what please?
I don't happen to know a specific solutioni, but you might try this workaround, even though it sounds rather klunky until you're used to it:
Use Apple's own Desktop Printer Utility to built a virtual Desktop Printer using Translator Postscript, which will automatically be set as the default Classic printer, even though it doesn't actually appear on the Desktop, and should be accessible through either AdobePS or Apple's own LaserWriter driver.
Tell that to print to File, which should produce a .ps file that will double-click open in Preview, which can convert to PDF.

Having trouble exporting to pdf from InDesign CS6

When I attempt to export to pdf from InDesign CS6, the application crashes. Apparently there is some phantom plug-in issue.
I need to get this resolved asap.
Thank you,
Marissa

Have a look at this generic document to help you troubleshoot: http://helpx.adobe.com/indesign/kb/troubleshoot-printing-pdf-export-indesign.html
Could you also provide details about what you've tried, and what errors you encountered? Is this problem limited to a particular document, or all documents?

Export to PDF from Autocad: Acrobat always opens PDF with 'layers panel and page' shown.

Hello,
Whenever I export to PDF from Autocad, Adobe Acrobat opens the PDF with the 'Layers Panel and Page' shown.
Each time I have to manually go to 'Properties' and select 'Page only', close 'Properties' and close the PDF and select to save the changes, in order to show the just the page.
Is there a way to make PDFs always export to 'Page only' automatically as default?
Thanks!
Ione

Thakns Peter, I had seen this thread, but it doesn't really address my issue. I've exported individual chapters from the book file, all with success, so I know there isn't a file corruption issue. The problem seems to do more with memory allocation/usage.
I have tried: quitting and then immediately exporting the file, and even rebooting and then relanuching and exporting. Both of these allow me to get a few pages farther along, but still not through the entire book.
I remember back in the day there used to be a setting for how much RAM/dis c space was allocated to a certain applicatino (I knowm it was a long time ago). I didn't know if there might be something like this hidden somewhere

Buttons not exporting to PDF from CS5

Howdy, all. I've a problem exporting documents containing buttons to PDF. Specifically, CS5 doesn't export interactive buttons placed in my InDesign document to interactive buttons in a PDF file; they show up, instead, as simple, non-interactive graphics. (No pointing fingers, no actions.)
This is true for all documents I have created in or imported into CS5.
As a test, I went back to CS4 and created a document with a single button chosen from the "Sample Buttons," to which I attached the "Next Page" action. Exporting to PDF from CS4 works fine; I get a functioning Next Page button in the resulting PDF file. Opening the same InDesign document in CS5 and exporting with the same settings to PDF yields a non-functioning button graphic appearing on the PDF page.
Opening the PDF file in BBEdit, I see that there is no "Fields" entry in the PDF file's Catalog dictionary, so it seems as though the button is, indeed, being exported into the PDF file as a simple graphic.
What obscure CS5 setting (presumably hiding in plain sight) am I missing?
By the way, CS5 does export the buttons correctly to swf.
Thanks much.
- John

In CS5 you have to change the export type to an 'Adobe PDF (Interactive)' to get the buttons to work.
Bit of a pain because you can't save presets like you can with the standard PDF export, but you can specify some of the PDFs view settings at the same time. In my view they should have just added all that functionality to the standard PDF export, but perhaps that wasn't possible. However it was a dud decision to remove working button export from the other PDF export.

Export the pdf from indesign some error Pop Up window (Failed to Export the PDF file). How slove the

Export the pdf from indesign some error Pop Up window (Failed to Export the PDF file). How slove the problem
Please some one help on this

You need to try exporting the first half of the book.
If that exports ok then export the other half of the book.
Whatever half it fails on - keep dividing the book in half to find the culprit page or pages.
For example if your book is 128 pages long:
1. Export pages 1 - 63
2. If these Fail to Export then
3. try exporting1-32
4. If these Fail to Export
5. then try exporting1-16
If it doesn't fail (step 2)
Then export pages 64-128
and 64-90 etc.
until you find the pages causing the issues.

Color changes when exporting to PDF from Apple Pages or Word

When I export to PDF from Apple Pages or Microsoft Word, there is a noticable color shift.
The RGB color values that are 23, 76, 140 in Pages for a medium shade of blue like this but appear as 50, 61, 134 with a decidedly purple cast like this in the PDF.
Has anybody else run into this problem? Any tips for troubleshooting?

Thanks for the reply. It was created using Apple Pages. I tried exporting to PDF in two different ways, both with the same result.
1. Within Apple Pages, one can click File > Export > PDF
2. The other option is to click Print > PDF > Save as PDF
I also tried this second method with Microsoft Word, and again the color was altered. Any suggestions that you can provide to resolve this issue will be very helpful.

Exporting a pdf from InDesign-need to access Overprint

I am exporting an InDesign CS5.5 Document with mixed ink and Illustrator eps with pantone overprints.
When I export it into PDF the native mixed ink in InDesign represent accurately.
However the Illustrator eps preview as solid gray @ 70%. This is the overprint layer onto of Pantone 293.
When I turn on Print preview in pdf it is accurate.
My question is:
In the export to pdf palette under the output header, there is a check box 'simulate overprint'.
I've tried several different variations, but cannot get that check box to turn on.
Unlease I make an X-1a file the overprint for the Illustrator eps does not preview without turning on the output preview palette in Acrobat.
And lets face it, to the client, that is rocket science.
How can I access the 'Simulate Overrpint' option when I am exporting the document.
Thanks,
J-

Or, better than that, export the PDF from InDesign as PDF/X-4!
By default, Acrobat and Reader use overprint preview when displaying PDF/X-4 files. Plus you have the benefit of full color management and not having transparency ruined by premature flattening.
One other note. Other than for the fairly common practice of overprinting black text over colors to avoid halo effects due to registration, one should be exceptionally careful in using overprint. Trapping, the other good, justifiable use for overprint is really best performed by the RIP. Most modern RIPs provide for automatic trapping. Overprint should absolutely not be used as a “poor man's transparency,” especially in conjuction with spot colors. With the advent of real transparency in the Adobe imaging model and hence in Illustrator, InDesign, and PDF, there is no good reason to use overprint hacks anymore to simulate transparency.
- Dov

Exporting a PDF from keynote without losing hyperlinks

exporting a PDF from keynote without losing hyperlinks
anyone have any ideas why it doesn't export the hyperlinks to the PDF?
i only have PDF reader on my machine, not the full PDF creator

Or, better than that, export the PDF from InDesign as PDF/X-4!
By default, Acrobat and Reader use overprint preview when displaying PDF/X-4 files. Plus you have the benefit of full color management and not having transparency ruined by premature flattening.
One other note. Other than for the fairly common practice of overprinting black text over colors to avoid halo effects due to registration, one should be exceptionally careful in using overprint. Trapping, the other good, justifiable use for overprint is really best performed by the RIP. Most modern RIPs provide for automatic trapping. Overprint should absolutely not be used as a “poor man's transparency,” especially in conjuction with spot colors. With the advent of real transparency in the Adobe imaging model and hence in Illustrator, InDesign, and PDF, there is no good reason to use overprint hacks anymore to simulate transparency.
- Dov

Anyone know how to export a PDF from InDesign so it is "click to go to next page" instead of "scroll to go to next page"?

Anyone know how to export a PDF from InDesign so it is "click to go to next page" instead of "scroll to go to next page"?

I don't use the latest InDesign, but in the past ID's options for exporting to PDF did not allow setting how a PDF should be viewed once exported. However, these settings can be adjusted in Acrobat through Preferences: check out Page Layout and Zoom under Page Display.
David

Error in character spacing when exporting to pdf from word 07

I am having trouble with exporting to pdf from MS Word 07. The character spacing throughout the document is wacky. This also happens when exporting to pdf from a GIS program.
Any help?

I use the term export because that is how it is done in the GIS software that I use - ArcMap 10.
In MS Word I access Adobe Acrobat Pro 9 through the print menu. I am using Windows 7.
I do not always have this trouble, but it started yesterday on a 30 page word doc and then after that, it started on an ArcMap doc.
As for embedding fonts, when I check the Word doc as you suggested, i see many different fonts listed. Some are embedded, some embedded subset, some are not embedded at all. I use styles to manage font types and heading levels. There is nothing fancy about it - all Times New Roman.

Background Colour Incorrect when exporting to PDF from Crystal Reports 2008

Hello All
When exporting to PDF from CR2008 the background colour of the crosstab is incorrectly displayed. The problem is as follows to create a crosstab with a grey header row and column details in white we have used the following trick.
Format Cross Tab Border Background is set to Silver.
Crosstab Expert Grand Total Background colour is set to white.
The result is a crosstab with header in grey and details in white.
This report displays correctly in CR2008, and exports as seen on screen to everything but PDF. When exporting to PDF the Crosstab is completely grey taking on only the Background colour of silver, and ignoring the Grand Total Background colour being set to white.
What is strange that when I print to PDF the format is also displayed exactly as required,
Any help on this matter would be greatly appreciated.
Some additional details.
CR2008 version 12.3.1.683
Adobe Reader version 9.3.3
Windows XP Professional
Thanks
Phillip
Edited by: Phillip L on Nov 23, 2010 1:51 PM

If this is a big issue for you then please purchase a case and a Rep can duplicate and escalate to R&D.
As a work around export to Editable RTF and in Word 2007 you can get a PDF export plug-in and then export to PDF.
Thank you
Don

Can you print password protected pdfs from an ipad?

can you print password protected pdfs from an ipad?

This may help, but I do note that the printer you state is NOT on the airprint list. You may need to go to the app store and see if Canon has an app that will facilitate printing on a non AirPrint device.
http://support.apple.com/kb/HT4356

? Export a pdf from my iPad

Similar Messages

Maybe you are looking for