Export a project from my final cut x pro

hello ASC ,
I need help regarding my final cut pro.
am trying to export a personal project but every time sharing bar reach 11% or 12 % i get this message (final cut quicktime error: -50).

Why not update to latest version of FCPX ?

Similar Messages

  • How do I export a project from Final Cut Pro onto my desktop?

    How do I export a project from Final Cut Pro to my desktop as a movie?

    Can anyone please help me.. when I click on my timeline in my project library and try to export movie nothing happens! and when I  try to "share" to youtube I get an error message stating that it cannot be exported because it contains "no video"... The 4 minute music video that I've created with shots off my Canon T2i looks and plays great....If I uploaded the videos into Final Cut but did not save them on my desktop or anywhere else on the Mac would this be a reason to get this message? I have never experienced this before...the only option under "share" that works is "email"
    [email protected]

  • Subject : Slideshow looks bad  Hello guys  I have a project in my Final Cut just about done.  I want to add my slideshow as part of the project and burn it to DVD.  In my slideshow, there are some stills from the movie clips and some downloaded from the i

    Subject : Slideshow looks bad
    Hello guys
    I have a project in my Final Cut just about done.  I want to add my slideshow as part ofthe project and burn it to DVD.  Inmy slideshow, there are some stills from the movie clips and some downloadedfrom the internet but they all look blur when playback and even worse if Iapply Ken Burn to it.   Pleasesome one can tell my how to do it right or it can’t be done because thedownload quality and stills from the clip are not suitable or slideshow.  Thank you
    PSC

    Thank you Ross.
    The entire DVD containing Quick Time movies (Final CutExpress project) and slideshow was done in iPhoto.  The Final Cut project was rendered prior to export to QT,  the slideshow was sent to iDVD withoutrendering. The slideshow with most of the pictures from my still camera incombination with stills from movie clips and some downloaded from the Internet.After burning, the movie playback is perfect but the slideshow is not.  The slideshow containing 3 differentkinds of pictures; those from my still camera looks OK; the stills from themovie clips and from the Internet are not.  I don’t have much knowledge in this game, but I think NTSCwith frame size 720x480, and the downloaded picture Item Property shows most ofthem are between 400 to 500 x 300 to 600, may be both of them are not suitablefor TV screen while the stills from my still camera looks OK because they are2048x1536.  Please enlightenme.  Once again, thank you so much,I really appreciate the time you offered.
    psc

  • I need to remove a rig/wires from my final cut pro 7 project.  Can Apple Motion 4 remove wires/rig?  Are there any rig removal plugins for final cut pro?   Thanks!

    I need to remove a rig/wires from my final cut pro 7 project.  Can Apple Motion 4 remove them?  If not can anyone recomment any plugins for Final Cut Pro or Motion that can remove them.  Thanks!!

    In Motion 5 there is a plugin from CoreMelt called "SliceX" that does this.  But I don't know anything in Motion 4 that will do it.  You may get more help posting in the appropriate "Final Cut Studio" section of this forum.

  • Error sending multi-track project back to Final Cut Pro, can't open XML

    I am an experienced Final Cut Pro user but just tried using Soundtrack Pro for the first time on a real project. I sent the audio from my Final Cut sequence to a Soundtrack Pro multi-track project, added a few effects and created some fade-ins and fade-outs, and then tried to Export back to Final Cut.
    I selected "File > Export", named my file and selected "After Export > Send files to Final Cut Pro sequence."
    Now in Final Cut an error appears that says "The document “Name.xml” could not be opened. Final Cut Pro cannot open files in the “Final Cut Pro XML File” format."
    Am I crazy or is something wrong happening here? I can get the exported audio files to appear in my sequence if I select "File > Import > XML" in Final Cut, but after this whole process Final Cut seems to be functioning unreliably (after closing Final Cut and re-opening, I even once got a similar error that said "Final Cut cannot open files in the Final Cut Pro Project File format", which is obviously crazy).
    Am I doing something wrong? Any advice would be greatly appreciated.

    hi,
    i have the same situation. expirienced in fcp, new in soundtrack pro.
    similar message. did you find an solution ?

  • Does the projects created in Final Cut Express transfer over to the new Final Cut Pro software?

    Does the video projects created in Final Cut Express transfer over to the new Final Cut Pro software?

    You want to go from FCE to FCP-X?
    You would need to do so in multiple steps.
    1) You would need to be working in a very late version of FCE.
    2) Open the FCE project in FCP-7.
    3) In FCP-7, export an XML of the sequence you wish to get to FCP-X.
    4) Purchase the software 7toX
    http://assistedediting.intelligentassistance.com/7toX/
    5) Import the XML into 7toX, export the FCP-X friendly file
    6) Import the converted XML into FCP-X
    7) Re-link all you media
    It should be noted that when you use XML, not all the things you have done in your original sequence will make it through the final translation. There is more information about this at the 7toX page linked above.
    MtD

  • Gaining better resolution from my final cut hd express films

    Hey, can anyone help my on going conundrum once and for all. I've asked editors, all be it avid based, apple technicians and i've still yet to have a definite answer. I've been editing on my macbook using imovie 08 HD, which has been fairly adequate. However, I also have a g5 powermac with th final cut express HD software. I'm not too fussed about livetype and other beneficial FX that final cut express can offer, but what i do want is a better resolution for the finished product, as the final result tends to be a bit blocky. I used to work in TV as director and so have sat in on many an edits. I guess what i'm after is the amateur version of onlining, if this exists??? with AVID suites, in simple, this basically involves re-entering all the rushes, but i've got a funy feeling that it's not that simple sat at home, as the kit in an online suite, would set me back a couple of 100K!
    I guess in short what i'm asking asking is A) will i gain a better resolution from using final cut HD express and B) how do you gain the highest possible resolution on either pieces of software. My camera is the Sony Z1 and i'm currently using iDVD.
    If anyone can help I'd be hugely grateful!!

    thanks for the hospitality! i only wish i'd used the forum earlier...it's nice to there are still decent people out there, willing to share their knowledge..!
    my macbook is the 2GHz core duo, but not sure about the G5, it's circa 2004 (i know that's no real help!)
    the 'blockyness' in imovie has been there from day 1 and always appears after i have burned the movie off in idvd or merely exported it to an mpeg4 file or likewise and on sequences where i have applied an effect, especially raised the exposure levels the 'blockyness; is almost lego like! but as a general rule of thumb, when editing the rushes look great. once they've been exported its as if they have become 2nd/3rd generation. I've imported stuff to final cut express 2 (recently got the upgrade software to HD express) the rushes look fine, but i'm presuming once i export the same will apply. The quicktime software i'm using is the 7.4.5 version, can this have an effect on the quality? and whether or not the movie is viewed back on the mac or through an external video monitor, the same quality is apparent. I am capturing straight from the camera, but not sure if im using cinemode, this isn't a feature i'm aware of in the menu of the Z1.
    I'm no steve jobs, but I'm pretty sure the problem lies around the exporting stage of my movie making. for example, when with imovie, when i produce a title. the edges of the lettering are perfect. once it's been exported, the edges of all the letters are very soft. I've had a look at some other discussion group pages to see if anyone shares the same problem. somebody proposed changing the expert settings in imovie8 which i did but to no avail.
    I have toast software that i have not yet used, would this make any difference?
    Many thanks again for your guidance.

  • How can you fix corrupt Project Files in Final Cut Pro X?

    Hello All,
    I have reason to believe that one of my project files in Final Cut Pro X is corrupt.
    How may I begin to resolve this issue?  Is there a third party software someone could recommend, like Digital Rebellion (if they have software for FCP X, I'm not sure) that may improve, if not hopefully solve this issue?
    Many thanks!!
    Molly

    Had a similar problem.
    Follow it here:
    http://www.fcp.co/forum/4-final-cut-pro-x-fcpx/11076-freeze-during-export
    among other steps taken I used Corrupt Clip Finder to isolate/remove the culprit and all was OK after that
    no idea how/why the file ( which I''d been using over 5 previous versions) became corrupted

  • Can/ how do I link two or more "projects" - not events or clips - "projects" together in final cut pro 10?

    Can/ how do I link two or more "projects" - not events or clips - "projects" together in final cut pro 10?

    Thanks Tom -
    I created two "sequences". They are currently listed individually in the "project library". Now I want to take sequence "B" and attatch it in it's entirety to the end of sequence "A" - forming one long sequence.
    I have tried to drag sequence "B" and drop it into "A's" timeline. I have tried to creat a compound clip. I'm either missing something - or - you can create a compound "clip" or a compound "event" - but perhaps you cannot link to "projects" together.
    Does this help descibe my problem?
    Thanks again.

  • HT203477 Why does my computer quit unexpectedly when I click on "Show the Project Library" in Final Cut Pro X ?

    Hello,
    When I click on "Show the Project Library" on Final Cut Pro X program, my computer unexpectedly quits.
    I just purchased an iMac 27in screen, (16G Ram) and all the features suggested by the Apple representative to run Final Cut Pro X.
    The program was working well for about a week. Afterward, I downloaded all my iMovie projects. I'm wondering if that has created this problem.
    Any suggestions as to what the solution might be?    Thanks.
    Jack

    Over the year I've used FCPX, it' s gone through "spells" where specific actions would crash it - much as you describe. Trashing preferences has nearly always fixed things. Several times, when it did not, I reinstalled the app.
    However, I've never imported an  iMovie project so I can't give any first hand advice. It will be interesting to see whether FCPX opens if it doesn't see those projects. (per Tom Wolsky's advice.)
    Russ

  • I am exporting my project from CS3 to Encore.  The message tells me my video file exceeds the capaci

    I am exporting my project from CS3 to Encore.  The message tells me my video file exceeds the capacity of the disc.  Any help?  In fact I have adjusted the bitrate to 4478 MB and it let me pass,  But when it goes to ENcore the message says the file exceeds 4.7 GB.  I chacked up it is true the M2V files is over 5 GB.  Why is it?  Anyone can help?  Thanks a lot!

    >a " trick " question
    Hmm... let's see here...
    The Semi has taller tires, but the Ferrari has wider tires
    The Semi has 18 gear speeds, the Ferrari has a 6 speed transmission
    The Semi and the Ferrari both have a supercharger
    The Semi runs Diesel, the Ferrari runs high octane gasoline
    The Semi driver is about 6 feet above the roadway, the Ferrari driver about 6 inches
    The Semi driver has a CB, the Ferrari has a stereo with 12 speakers
    I think this deserves a bit more study...

  • When I try sharing to my apple devices from my final cut pro x, I keep getting a "Quicktime Error:-50". How can I fix this?, When I try sharing to my apple devices from my final cut pro x, I keep getting a "Quicktime Error:-50". How can I fix this?

    When I try sharing to my apple devices from my final cut pro x, I keep getting a "Quicktime Error:-50". How can I fix this?

    You can search the entire internet by putting that error message into google, see what other discussions appear.
    With only the little information you've provided, I'd trash Compressor and download it again from the App Store.
    You could share the timeline out to MPEG2 and then import that into iDVD, if you have it, or Toast.
    Given an hour or three, someone with better suggestions will soon chime in.

  • When exporting as a quicktime movie, final cut pro crashes!

    When exporting as a quicktime movie, final cut pro crashes about 3/4ths the way through the 12 hour process. I'm saving it to a La Cie 500 GB disc by fire wire. It's worked before but after I converted one SD sequence (that was shot in HD)to a HD sequence, I haven't been able to export it and it won't play straight at anything bigger than 25% size. Please if you have any advice I won't forget it. I'm trying to export as ProHD 1060i.

    I converted one SD sequence (that was shot in HD)to a HD sequence
    How, exactly? And what were the settings of your new HD sequence? DVCPRO HD 1080 60i?

  • Is there is a way to export the themes from iDVD to DVD Studio Pro?

    OK...so here's what I'm trying to find out: is there is a way to export the themes from iDVD to DVD Studio Pro? Or can I build the project in DVDSTPRO and import it to iDVD to build and burn?
    I've read several threads here and haven't come across my specific question. If I missed it, please copy me a link. Otherwise, I'd like to use the templates/themes in iDVD with my FCP project.
    I was thinking about importing the project from FCP to iDVD. Then, I thought about the markers etc....
    So, if anyone had an idea, tip or link, I'm all for it!
    Thanks!
    ron

    Importing iDVD Projects and Themes
    DVD Studio Pro 4 can import projects from iDVD 3 and iDVD 4. You can import an iDVD theme by using the theme in a project within iDVD and importing the project into DVD Studio Pro. When creating the project within iDVD, you do not need to use the final assets or make a complete project.
    Note: DVD Studio Pro will not import projects from iDVD 1, iDVD 2, and iDVD 5. In general, iDVD needs to be installed on the same system as DVD Studio Pro. An exception is if you import an iDVD 4 archive project.
    To import an iDVD project or archived project into DVD Studio Pro:
    1 Do one of the following:
    • Choose File > Open.
    • Press Command-O.
    2 Locate and select the iDVD project or iDVD 4 archive project in the Open dialog, then click Open.
    DVD Studio Pro imports the iDVD project.
    About the iDVD Project Import
    When DVD Studio Pro imports an iDVD 3 or iDVD 4 project or iDVD 4 archive project, it has standard locations it looks for to find the assets and themes used in the project. This is especially important if the project uses custom themes.
    The standard locations that DVD Studio Pro uses are (in this order):
    • iDVD project bundle: This is the file created when you save the project.
    • [user]/Library/iDVD/Favorites: This folder is located in your home folder.
    • [root]/Library/iDVD/Favorites: This folder is located at the root of your disk.
    • /Network/Library/iDVD/Favorites: This folder is on a network system specifically
    configured by your system administrator for this purpose. (This is not the same as having a server networked into your computer.)
    • iDVD application bundle: This is the iDVD application file that contains the default theme elements.
    Note: When you create an archive project in iDVD 4, you can choose to include the themes and encoded files. For the best portability, you should include both options. This results in a larger archive file, but ensures you can take the file to any DVD Studio Pro system and import it without missing assets. If you do not choose to include the themes and encoded files in the archive file, those assets must be available in one of the standard locations.
    If your project will have automatically-created chapter index (scene selection) menus based on markers embedded in the video, it can be easier to create these within iDVD prior to importing the project into DVD Studio Pro. This ensures the chapter index menus use the selected theme’s background and include arrow buttons to navigate between the menus.
    Important: To ensure all iDVD menu elements import correctly into DVD Studio Pro, you must navigate to each chapter index menu within iDVD before saving the project. This is also true for any menus you add to your iDVD project by clicking the Folder button.
    Issues With Importing iDVD Projects
    There are some issues to be aware of when you import iDVD projects:
    • If you import an iDVD project with DVD-ROM content, DVD Studio Pro does not update the settings in the Disc Inspector’s General tab to reflect the DVD-ROM content. You must manually select the DVD-ROM layout and choose the folder to include.
    • When you create a slideshow in iDVD, you can add arrow buttons to each still to provide viewers with an additional method of jumping to the previous and next stills. These arrow buttons are not imported when you import an iDVD project into DVD Studio Pro. The viewer must use the Previous and Next buttons on the DVD player’s remote control to jump between stills.
    • The button highlights used in iDVD may look different when imported into DVD Studio Pro. In most cases, the text in the buttons is set to be included in the highlight. Additionally, buttons that use an underline in iDVD will not have an underline when imported into DVD Studio Pro.
    • When you import an iDVD project, you may find that the button that is highlighted by default on some menus changes. During the project import, DVD Studio Pro numbers the buttons on each menu and highlights button 1 by default. You can assign any button on a menu to be the default button in the Menu tab in the Menu Inspector.
    • If you import an iDVD project that contains a drop zone configured as a slideshow and has multiple slides assigned to it, DVD Studio Pro only shows the slideshow’s first slide in the drop zone.
    Source: +DVD Studio Pro User Manual+

  • FINAL CUT STUDIO PRO - CAN'T GET "SMOOTHCAM" EFFECT

    PROBLEM:
    FINAL CUT STUDIO PRO - CAN’T GET “SMOOTHCAM” EFFECT
    I use a Macbook Pro 17”
    Software: Leopard 10.5. External LaCie Hard Drive 1TB
    I upgraded my Computer Software to Leopard and reinstalled Final Cut Pro and Motion on my Laptop. It worked fine with SmoothCam, but as I had lost too much space on my Laptop Harddrive, I decided to reinstall the full program, choosing custom location the external LaCie drive.
    Since than Final Cut Pro can’t find SmoothCam and it asks to reinstall SmoothCam.
    ➢ ./library/Plug-Ins/FX /Plug< Not Existing
    ➢ ./library-Application Support/ProApps/Internal Plug-Ins/FX Plug<
    This file is empty.
    My project I work on at the moment is a film, where I had done a lot of SmoothCams, but since reinstalling it will not find the effect anymore, it asks to reinstall SmoothCam.
    In the mean time I tried several times to start from scratch and reinstall the whole Program, but now I’m not even able to register anymore, it will not accept the correct Registration No.
    I would appreciate anybodies help very much.
    Zuckerhut

    I had a similar problem when I upgraded my MacBook Pro to leopard as well. This is what I did (after several trial and errors)...
    1.) Wipe the computer again and reinstall leopard. I suggest doing a custom install and just leave out things you do not need as they just take up valuable space.
    2.) Reinstall FCS but DO NOT let it install the additional content as we will get to that part later. Just install the core programs themselves and uncheck the boxes to install the additional content.
    3.) After FCS is installed re-run the installer and install the content but change the location to your external drive. At this point I created a folder on my external called "Final Cut Studio" and Created separate folders for each program and its content.
    4.) After you have reinstalled the content on to your external drive, go into each program and point them to where the extra content is kept. <--- This step and step 3 arent really needed, but they make things easy for when you have to wipe your computer. This has saved me LOTS of time on reinstalling FCP because now all you have to do is install the core programs from now on.
    You once you start FCP all your effects should be there. The main thing here is to do a complete wipe of the system and rebuild. Not just an uninstall / re-install. As far as your registration problem your going to have to call apple. I had a problem with an old serial number where it would not take it anymore after updating the software to 6.0.2 from 6.0. They can give you a new number to use and it does not take too long.
    Hope that helps you out some.

Maybe you are looking for