Export a short clip from FCE to mail and send as Email attachment

I have been trying to export short clips from FCE to mail. I have been getting as far as saving it as an attachment to an Email.
I have not been able to successfully deliver it to somebody. Is that a problem with my server or are my settings or the format I am using to send it incorrect ? What are the best and safest settings to choose from so the email goes through ?
I have send video clips directly from Quicktime files. Its working well and fast with no delivery problems. What am I doing wrong with FCE exports to mail ?
G4 PowreBook Mac OS X (10.4.8)
G4 PowreBook Mac OS X (10.4.8)

well it may not be how your exportinging it. what you need to find out is how big of a file will you service provider let you send. your file may be over the limit, so all you need to do is compress it even smaller. when i send a clip i don't use the mail setting i just compress it my self as small as i can. my provider will only let me send up to 10Mb files only.

Similar Messages

How copy article from Internet,paste into document,send as email attachment

A friend has asked me to do some research for her. She has limited online hours. She wants me to copy articles from Internet, paste them into a document, then send that document AS AN ATTACHMENT to an email. I know how to copy the article, BUT I DO NOT KNOW HOW TO PASTE IT INTO A DOCUMENT, NOR DO I KNOW HOW TO SEND THAT DOCUMENT AS AN ATTACHMENT TO EMAIL.
Normally when I copy and paste, it goes directly into the email. The goal of this method I have been asked to use, is so that the recipient can download the document and read it off line. Thanks for any advice on this.

Others give good advice, here - but, to answer your question...
First, you'll need to use a text editor to create the document that will contain the pasted information, and which will become the attachment to your email. TextEdit, which probably came with your Mac, will work. Whatever text editor or word processor you use, be sure to Save the document in a format she can open. Rich text is probably the safest choice, because almost any word processor can open that format.
So, start TextEdit, and when the new document appears, select Save from the File menu. When the Save window pops up, give the new document a name, and select your Desktop for the location. Down at the bottom of the Save window, for File Format, choose Rich Text Format (RTF). If she is not on a Mac, be sure the Hide Extension box is NOT checked. Click the Save button.
Now you can start copying and pasting from websites. The process will go like this:
Select some text, then choose Copy from your browser's Edit menu. Next, switch to TextEdit, put your cursor where you want the text to appear, and select Paste from TextEdit's Edit menu. (If you are going to do a lot of this, it will pay to learn the keyboard shortcuts.)
Selecting text on web pages can be somewhat frustrating. For really long selections, click once to put your cursor where you want to start copying, scroll down to where you want to end, and - while holding down the Shift key - click again; everything between the clicks will be selected. Try to select text, only. If you paste any graphics into your RTF document, TextEdit will prompt you to re-Save the document in RTFD format. If she really needs graphics, you can do that, but before you do, be sure she can open documents in that format. Most tables on web pages are impossible to copy and paste without the columns and rows going all out of alignment, so screen shots - which are images - are the best bet for tables. (If she can't open a RTFD document, you can convert the FINISHED file to a non-editable, but easily viewable, PDF document by choosing that option from the Print window. Be warned that if you create a long document with many graphics, and then convert it to PDF, the file size can get big - possibly preventing some mail servers from delivering it.)
When you start pasting into TextEdit, you are going to get all sizes of text in various colors and fonts. If you paste text from a web-page that has white text on a black background, you will not see the white letters on your white page (tip: select the white area). After the first text is pasted into TextEdit, go to the Format menu and select Font>Show Fonts and a new tool window will appear. Select the text you just pasted, and format it to a readable size and font, then de-select the text. From now on, whenever you want to paste: from TextEdit's Edit menu, select Paste and Match Style.
When you are ready to send the file, Save and Close your TextEdit document. From Mail's File menu, select Attach File. Navigate to your Desktop, select your document, and, if she is using Windows, check the box to Send Windows Friendly Attachments. Click Choose File, to add the attachment to your email.

Dragging AVI video clip from iPhoto to mail to send

I want to send a 2 minute video clip to some familly members, but mail keeps quitting when I hit send.

252.4MB is way too much for an email... the maximum capacity of an email should be around 10MB (20 at most). You should consider another way to send your file... (thumb drive?)
Another option is to use Quicktime Pro to re-encode the movie in a lighter file.

I want to import short clips from home movies. How do I do this?

I am wanting to import short clips from old family movies which are on DVD. What is the best program for this? I don't want to import the full DVD just several short clips and then be able to use these clips in imovie.

You'll want to look at DVDxDV Pro. It can select very small segments on a DVD using the expandable timeline. This allows you to find exactly the part of the DVD that you want. It also has an iDVD export preset.
This video shows you how to grab individual clips from the DVD.

How to copy/export a video clip from event library to external hard drive?

Can you help? Can you export a video clip from the iMovie Event library to a hard drive

You can "daisy chain" FireWire devices. Plug your IF into the Mbook, and plug your external disk into the IF (it has two ports...), or do it the other way around, whatever seems to work best.
The whole chain will be as fast as your slowest device, and I think the FPod is FW 400, so the disk will also operate at that speed. Many people work like this on their laptops, and it works fine. Better than USB.
Don't use USB for it. USB needs CPU and is in general less efficient in handling audio. Daisychaining FW-devices is the way to go.
regards, Erik.

I have imported contacts from Outlook to Mail and they have synced via iCloud to my iPhone 3GS. I can't get my iPhone to make a call using these contacts but if I dial the number of any of the contacts on the keypad, the call DOES work! Help me please!?

I have imported contacts from Outlook to Mail and they have synced via iCloud to my iPhone 3GS. I can't get my iPhone to make a call using these contacts (it tries but then says call ended) but if I dial the number of any of the contacts on the keypad, the call DOES work! Help me please - is there something I need to do to the contacts because tehy came from Outlook? Thanks

Thank you for replying. Yes I deleted the old email address..

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

Back up all data. Rebuild the mailbox.

Need to choose fields from alv grid output and send mail

Hi,
I need to choose few orders from alv grid output and send mail as PDF for chosen orders.
Suggest if possible and how.

Moderator message - Please do not post your requirements and ask the forum to do your work for you - post locked
Rob

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

I think that may be a consequence of the email provider she is using. Some services (AOL is one example) inspect and modify email attachments, particularly photos, resulting in reduced resolution compared to the email that was sent.
The iPod does not do this. The resolution of the picture in the email she receives will be identical to what is imported.

Is there a way to stop Mavericks from launching My Mail and Word when I turn on my computer?

Is there a way to stop Mavericks from launching My Mail and Word when I turn on my computer?

System Preferences>Users and Groups>Login items.

Two days ago Mail stopped sending my emails.

Two days ago Mail stopped sending my emails. I am using OS 10.10.2. Connection Doctor shows the connections as green. I can send from my iPhone in iOS, but from my Mack Book Pro, nothing sends. What changed? How do I fix this. I get an error message saying "The identity of smtp.cox.net cannot be verified. The certificate for this server is invalid. … When I ask it to connect anyway, or try the send again, I get a second message saying "Cannot send message using server smtp.cox.net… Authentication required."
Connection doctor says "Connection to server succeeded; login not required."
How do I fix this?

This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
           ▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
          Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
          Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
          File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
          Show Expired Certificates
select it. Otherwise it will show
          Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
          Secure Sockets Layer (SSL)
select
          no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
          When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
          Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
If that's not what you see, post the contents of the window.

How do I cancel the distance between the numbers? I'm having trouble copy phone numbers from the phone book and send it via SMS This problem I've found in the Arabic language, numbers appear in reverse Please help System 6.0.1

How do I cancel the distance between the numbers?
I'm having trouble copy phone numbers from the phone book and send it via SMS
This problem I've found in the Arabic language, numbers appear in reverse
Please help
System 6.0.1

MPEG-4 should not be used in FCP unless it is converted first or optimized in the application.
Trash your preferences. Trash your project render files. Switch off background rendering. Do not re-render. Export your projects.
Ignore the last frame and first frame indicators.

I am trying to copy an e-mail and send it to pages

I am very new to mac. I am trying to copy and e-mail and send it to pages to edit. How do I do that?

Select the the text in your email (Edit > Select All
copy it (Edit > Copy)
start Pages
create a new document (File > New)
paste the text from the email into the new Pages document (Edit > Paste)

When I send a text using siri the recipient shows that the text came from my email. How do I fix that so it show that the text came from my phone number and not my email address?

When I send a text using siri the recipient shows that the text came from my email. How do I fix that so it show that the text came from my phone number and not my email address?

Settings > Messages > Send & Receive > Start new conversations from:
Only your phone number is selected.

Hello everyone! Can anyone make backup with NvBackup from his Tungsten E2 and send it to me, please? :3

Hello everyone! Can anyone make backup with NvBackup from his Tungsten E2 and send it to me, please? :3
I got corrupted bluetooth module on my ROM (hard reset does not help ).
Can anyone make backup *after[if you can]* hard reset and send it to me?
Please make link to rghost.ru or dropbox :3
Post relates to: Tungsten E2

Hello everyone! Can anyone make backup with NvBackup from his Tungsten E2 and send it to me, please? :3
I got corrupted bluetooth module on my ROM (hard reset does not help ).
Can anyone make backup *after[if you can]* hard reset and send it to me?
Please make link to rghost.ru or dropbox :3
Post relates to: Tungsten E2

Export a short clip from FCE to mail and send as Email attachment

Similar Messages

Maybe you are looking for