Export all data - service

Hi ,
I am trying to export all data from Service record type. but after export i find some data missing. After analysis we found that it is due to Microsoft office 2003 is restricted to only 255 columns.
Has anyone faced similar issue? What was the work around?
We don't have Office 2007 and procurement will take month. So need a immediately resolution.
Sandy

Try and open in notepad or wordpad.
In case you do not want to change the file in Excel try the viewer of Excel @ http://office.microsoft.com/en-us/excel/HA102221731033.aspx?pid=CH101030611033
Prakash

Similar Messages

I want to block ALL data services on my LG Revere prepaid phone...is it possible?

I recently upgraded to an LG Revere. This is a prepaid phone where I pay 0.15/minute as an old Alltel customer. I just looked at my account usage and found that my balance is dwindling QUICKLY due to data sessions. I don't use any internet or web services at all. I rarely text and honestly my phone is OFF most of the time because I live in the country and it truly doesn't work well out here.
Can I block all data services and just have a pay by the minute situation on this phone?
Thanks!!!

Ok, I neglected to say in my first msg that I DID get an response from my email sent on Sunday but since I got a real person on the phone that said she had fixed my problem on her end I did follow the instructions. Today, I did what the email said which is the following:
There is a known issue with Alltel plans and the LG Revere. On your phone, you have an application called “Daily Scoop,” which is a free service, but data charges do apply. If Daily Scoop was preinstalled on your phone when you purchased it, you may turn on or off notifications for both Verizon Messages and Bonus Messages through the application directly. Please follow the steps below to stop the data session charges for the “Daily Scoop:”
•        To access the Daily Scoop, click on Media Center
•        Then Browse & Download menu
•        Select the Daily Scoop icon
•        Once In Daily Scoop
•        Go to Menu
•        Then Options
•        Select Verizon Messages
•        You then have the option to turn On/Off – Select OFF
•        Hit CLR two times to go back to options
•        Select Bonus Messages
•        You then have the option to turn On/Off – Select OFF
You will still be able to access messages from the application, but you will not receive banner notifications on your home screen. You may choose to suspend Daily Scoop account by contacting [email protected].
I called again and the gal seemed to think that I was good to go. Again, I won't know until Friday most likely. They credited my account for the data session yesterday and the two today that occurred when I turned off the msg options. I will be sending a msg to vzdailyscoopsupport next.
By the way, in order to get a real person from the 800 number, you enter your phone #, option 4, option 4, option 5, enter your security code and they should connect you to a live body.
I will update again on Friday to let you know how it's going. Hopefully I'm on my way and maybe with this you will be too

Export all data from my waveform chart to excel

Hello, my name is Chris. I am just learning to use LabView. Everything I have learned so far is through these boards. Which is a valuable tool for someone learning. The VI I am working on is to monitor current from a unit we are testing. I am able to monitor current and have it running in what I believe to be real time. As I said, this is the first one I have made. I am trying to export all the data from my Waveform Chart to a report. Everytime I try I get one instance and it measures 0. I don't know what I am doing wrong. Any help would be appreciated. Also, if you have any suggestions on the all around working of this I would appreciate that as well. Thank you in advance.
Attachments:
Lp Current Test.vi ‏83 KB

Hey Christophrt,
If you are trying to display the microseconds for a waveform chart in LabVIEW here is how you can do it:
Go to the Chart Properties>Display Format>X-Axis>Advanced editing mode>enter:
%<%I:%M:%S%6u>T as the format string and you will have the hours: minutes: and seconds to the microseconds.
If you are trying to display the exported data in microseconds in Excel, you will probably have to do some formatting changes in Excel to have that work.
Regards,
Tommy G.
Applications Engineer
National Instruments

IS validation rule export to Data Services invalidates datastore logon details

I am exporting an Information Steward 4.2 SP1 validation rule to Data Services 4.2 SP1; a part of the rule is a database table lookup. In the export process, IS creates a new datastore with that table I'm doing the lookup against.
The problem is that every time I re-export the rule after changing it, I have to maintain db server logon details in that generated datastore again.
Have I missed a configuration step, or it's just an error to raise through OSS?

Hi Apurva ,
Now I got Variable Id and Varibale Value i have give From Data Fields of VC .
When i click on Button Export To Excel it gives
SET_VARIABLES_STATE is Correctly placed For
VARIABLE_VALUES VARIABLE_VALUE
if give
VARIABLE_VALUES VARIABLE_VALUE instead of SET_VARIABLES_STATE it is giving No MetaData is available for VARIABLE_VALUES VARIABLE_VALUE
it throws like .
please help in this regard.
I Have given The Formuls AS Below
"pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=zmp_prodn_mtef_ccp_1&BI_COMMAND_1-BI_COMMAND_TYPE=VARIABLE_VALUES VARIABLE_VALUE&BI_COMMAND_1-VARIABLE_VALUES VARIABLE_VALUE_1-VARIABLE_TYPE=VARIABLE_INPUT_STRING&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE-VARIABLE_INPUT_STRING="&2009&"&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE=0P_FYEAR&BI_COMMAND_3-BI_COMMAND_TYPE=EXPORT&BI_COMMAND_3-EXPORT_FORMAT=XLS&BI_COMMAND_3-null="
Regards ,
venkat p

Exporting All data

Hi,
I am exporting data using the "All" data option. When I import it into another databse should the data be recalculated?
Please confirm.

I think KrK was referring to level 0 exports, in which case you would need to agg the db.
if you are considering level 0 data.I am a fan of the full export and import on target as it is as defragmented as can be.
Regards,
Cameron Lackpour

Export to Excel Action in MS SSRS Report not exporting all data in Report

Hi,
I have developed a complex Report that has many expandable nodes in a table format. The report works fine.
However, when I export the Report to Excel using Actions --> export to Excel, only the data in expanded nodes is included. The data in collapsed nodes is not included.
I am looking for approach to include data in expanded nodes in Excel Export. The expanded data can be expanded in Excel.
Any help in this regard will be appreciated.

Hi Abhijit PS,
Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
can reference to this similar thread:
lost collapsing columns when export to excel
Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
Article below about how to add Expand/Collapse Action to an Item for your reference:
http://msdn.microsoft.com/en-us/library/dd220405.aspx
If your problem still exists, please feel free to ask
Regards
Vicky Liu

Export all data block records

I can't seem to remember but what is the library or tool in Oracle Forms that allows you to export the entire data block of records to a file (i.e. csv)? Instead of using TEXT_IO to write one record at a time, there was one to do the whole block.
Gio

The only thing I can think of is using the webutil library to either use CLIENT_TEXT_IO, or you can use the CLIENT_OLE2 functions to control the client-side applications and move your records over.
Regards,
Jordan

Export all data of selected line in search help to fields in table control

I've created a search help which will export 4 fields. These 4 fields should be populated to the corresponding fields in TABLE CONTROL. However, in my program, only the first column is populated and the others are blank. How to solve this problem? Do I need to include POV? Thank you.

Hi,
1. Create a search help with four exporting parameters.
    ( check the you have created properly the sterp step
     procedure in creating the search help).
2. No need to go for POV.
3. After creating the table control assign the fieldnames into
   the control, then click on the fieldname it will show the
   attributes of that field . ther you can find te search help field
   fill that field with your search help name .
4.After assigning the field, check it in executing the report.
      Hope this will work for you, if it is not let me know.
      Reward points if it is helpful .
Regards,
Madhavi

Error "Encountered an error while exporting the data. View the lof file (DPR-10126)

Hello,
I would like to have sugestions and help to solve a problem in IS 4.2.
I've created a view from two tables, joined together with the key from each one.
Then i've binded the rule with the view (mentioned above) created and calculated score for it.
The calculation is successful, however when i try to export all failed data i have the following error:
"Encountered an error while exporting the data. View the lof file (DPR-10126)"
When exporting failed data from calculations made directly to the datasources i do not encounter any problem, but when i try to export all data to CSV file (not only the 500 results limit) i have this kind of error.
However, when i visualize the data from the view created, it is also possible to export to csv file.
Resuming, the error occurs only when exporting all failed data from the view.
Can anyone help with this issue?
Thx
Best Regards,

Hello,
Your information is correct.
I've just confirmed it in the 4.2 SP3 Release Notes and they specifically refer to this issue.
A user who has 'View objects' rights for the project and a failed rule connection cannot export the failed data. This issue has been fixed in this release.
Thank you very much for your input.
Best Regards,

Data Services While Roaming

Hi All,
Apologies if this question has already been asked thousands of times...
I have a 9700 Bold v 5.0.0.421 (Platform 5.1.0.116) on O2 and travel a lot with my work, I just wondered if there was a way to effectively turn off all data services for near enough everything i.e. email, sports apps, weather apps whilst roaming but still allow BB Messenger?
Thanks in advance
Ben
Solved!
Go to Solution.

NOPE!
SMS is sent via the same stream as a voice call. So if your data services are blocked. you can still send/receive SMS (but not MMS)
1). Please thank those who help you by clicking the beside the 'Reply' button.
2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
3). Remember to have fun! We are all in this together!
4). Follow me on

How to select the "in columns" dimension on export all Command ?

Hello,
I'm trying to export data from an V6.5 Essbase database to a 9.2 one.
The easier and faster way I found is to use the 'Export database all data in Columns' from the 6.5 cube and load the data with a rule file in the 9.2 (The Export database command is MaxL command).
The Export All Command with the "in columns options", export all data and put one dimensions in columns. Previously, It was always the Time dimension (M01 .... M12). And all worked fine.
But someone changed the order of the dimensions in the V6.5 Essbase database. And now, there is another dimension (which changes more often) in columns and which have a lot of members (meanwhile my time dimension only have 12 members).
So do you know how to select the dimensions which is in columns when using the export database all data function ? I do not see any options in Maxl ?? Maybe there is a rule to follow, in the dimensions order ?
Do you have any idea about it ?
Thanks for your help
P.S : I'd prefer to avoid workaround such as using Reports Scripts or Calc Script (there are too slow).

Why not use Essbase's native export format, bring it over onto your new environment, and reimport? Change to your heart's content on the target.
Yes, the dimensionality (names, order, members, etc.) will have to be the same, but this approach, not the columnar export, is the fastest and most efficient way.
Regards,
Cameron Lackpour

Is BOE 4.0 integrated with Data Services XI 4.0

Hi,
I have gone through some blogs and documentation on Data Services XI 4.0 and some where it is mentioned that BOE 4.0 is integrated with Data Services XI 4.0. Is it true? If it is true then i want to know how can we integrate BOE 3.1 SP2 with data services XI 4.0 because right now we are using BOE 3.1 SP2, BW 7.01 and want to install Data Services XI 4.0 unless there is no compatibility issue between them.
I need this information immediately because we have to install data services if its compatible with BOE 3.1 SP2 and BW 7.01.

Hi Aditya,
From the XI 4.0 Data Services Upgrade Manual:
2.1 Major changes in Data Services XI 4.0
Unlike previous releases of Data Services and Data Integrator, SAP BusinessObjects Data Services
XI 4.0 introduces central user management, which relies on SAP BusinessObjects Enterprise. Users
are authenticated against the SAP BusinessObjects Enterprise security, and repositories are registered
in SAP BusinessObjects Enterprise.
You can use either an existing SAP BusinessObjects Enterprise XI 4.0 installation to manage Data
Services users and repositories, or SAP BusinessObjects Information platform services, which is availabe
to all Data Services customers and contains the required SAP BusinessObjects Enterprise services for
user management.
For information about installing SAP BusinessObjects Information platform services, see the SAP
BusinessObjects Data Services Installation Guide.
So it sounds like you can't use an exisiting BOE XI 3.1 CMC, but would need to upgrade it to XI 4.0 or use the SAP BusinessObjects Information platform services, which is included with XI 4.0 Data Services.

Business Objects universe Create disabled In SAP Data Services

Hi ,
I am trying to to create Business Objects Universe from SAP Data Services . But create and update options are disabled. I have the Information design tool and SAP Data services on the same machine .
Please see the below screenshot.
Please help me any settings I have to change to get enabled.
Thanks & Regards,
Ramana.

Hello Venkata Ramana Pandi,
As Manoj Dhyani mention in the above thread, try changing it into CWM format and give it a try.
Follow the below steps:
Export the DS datastore in CWM format, select the datastore and enter a XML file name
Open the Universe Builder (this option will be in BOE Program menu), you have a option in Universe Builder to import XML exported from Data Services/Data Integrator, check if that creates your Universe successfully
to use Metadata Exchange do the following
Open Data Services Desginer
Click on tools Menu -> Metadata Exchange
In the Metadata Exchange window
Select Export Data Services metadata to a file
Select DI CWM as metadata format
enter location for xml file (C:\temp)
Select the datastore you want to create Universe for
Click OK
Check for file named repo_export.xml in the C:\temp folder or the folder that you specified
Open Universe Builder and Select
Data Integrator bridge
and use the xml file as input to create universe

Import all data using maxl

Hi
we would like to export all data from BSO cube my maxl script,
as the db is bigger then 2gb, essbase split the file to 2gb each, and we’ll get more then
one file to import.
How can I have maxl script which know to import all data files on the specific folder without indicate the names of the data files created...
Thanks in advance,
Messi

This post may be helpful as it covers the same question - Re: Export Lev 0 goes into multiple files....maxl??
Cheers
John
http://john-goodwin.blogspot.com/

Rule sharing between Data services and Information steward

Hi, I would like to know if there is any way we can share/import Data services validation rules or functions into Information Steward. I know that we can import informaton steward rules/functions in Data services but not sure of vice versa.
Thanks,

Pandeyji,
You can only import rules into Information Steward that were exported from another instance of Information Steward. You cannot export a validation rule from Data Services to a zip format as is required by Information Steward. The format that the rules are exported from Data Services are not compatible with import to Information Steward.
Please refer to the Information Steward User's Guide in the section titled Importing and Exporting rules. This states "You can also import rules which were exported from other instances of SAP BusinessObjects Information Steward."
You can of course export rules from Information Steward directly to Data Services where they will be available for use in the Validation transform and in dataflows.
Thanks,
Denise

Export all data - service

Similar Messages

Maybe you are looking for