Export all sequences into one quicktime?

I'm sure it's something silly I'm overlooking...but I'll ask nonetheless.
I have 6 sequences, each of varying length. How do I "join" all the sequences for an export to a single movie file? Surely I can't be stuck exporting each in turn. Otherwise, how will I be able to create a quicktime rough for importing into Sound Track and subsequent scoring?

thanks so much, Tom - that did the trick after a bit of confusion over what can be dragged and dropped. I didn't realize I could drag and drop the individual sequences into the timeline of a new sequence. I was trying to drag the sequences into the icon for a new sequence in the browser.
Love your FCE book BTW - you must never get tired of hearing that!

Similar Messages

  • Exporting all tracks into one...

    how do i export all the tracks into one finished product? it only allows me to export one track or all tracks individually!
    what am i doing wrong?!!!
    thanks in advanced!

    Bounce.
    http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=29%26se ction=1%26tasks=true
    !http://www.gifmania.co.uk/cats/catscrazy/cheshire_cat_bouncing_mdwht.gif!

  • Data Managers from all applications into one unique package

    Hi,
    The issue is that we are trying to put all the Data manager packages in all applications into one unique package.
    If BPC admin changes the parameters or currency rates , he just has to run that one package which includes all necessary
    packages and he may look into logs if he has to.
    Firstly , We tried to put multiple run_logic process types into one process chains, but it is giving errors like;
    u201CAn exception with the type CX_SY_TABLE_KEY_SPECIFICATION occurred, but was neither handled locally, nor declared in
    a RAISING clause Line Type Contains a Component with the Name FI_ACCu201D
    or
    u201CAn exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause
    The system tried to insert a data record, even though a data record with the same primary key already existsu201D.
    Secondly, after we read the blog () and we tried to run program
    UJD_TEST_PACKAGE , but we get errors with %SELECTION% prompt variable.
    Is there any other solution you can advise?
    If we use the program UJD_TEST_PACKAGE how do we fill AnswerPrompt paremeter file for the dynamic script below?
    PROMPT(SELECTINPUT,,,"Lütfen bir kategori seçiniz.","%CATEGORY_DIM%,%TIME_DIM%")
    PROMPT(TEXT,%LEVEL%,"XX Level",,"7,6,5,4,3,2,1")
    INFO(%EQU%,=)
    INFO(%TAB%,;)
    TASK(XXX_LOGIC,TAB,%TAB%)
    TASK(XXX_LOGIC,EQU,%EQU%)
    TASK(XXX_LOGIC,SUSER,%USER%)
    TASK(XXX_LOGIC,SAPPSET,%APPSET%)
    TASK(XXX_LOGIC,SAPP,MM)
    TASK(XXX_LOGIC,SELECTION,%SELECTION%)
    TASK(XXX_LOGIC,LOGICFILENAME,XXXX.LGF)
    TASK(XXX_LOGIC,REPLACEPARAM,LEVEL%EQU%%LEVEL%)
    Best Regards,
    Melike

    Hi.  I have a similar issue to the one posted below in that I want to run a logic script for one application (call it Application A) from a DM package in a different application (Application B).  This is to stop the user from having to switch between applications to run the logic.
    I have tried the following:
    1. I have tried putting the script logic from App A into App B, but the dimensionality is different so it fails to validate.
    2. I have tried "hard coding" the application name within the process chain, but it fails with an error "u201CAn exception with the type CX_SY_TABLE_KEY_SPECIFICATION occurred ...." similar to the post below.
    Any suggestions would be appreciated.
    Thanks
    Sean

  • Have multiple accounts, how can I move all products into one account?

    have multiple accounts, how can I move all products into one account?

    Backup Software Recommendations
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    SuperDuper!
    Synk Pro
    Tri-Backup
    Others may be found at VersionTracker or MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.
    Or you can simply use the Restore option of Disk Utility to clone the drive to the backup:
    Clone using Restore Option of Disk Utility
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.

  • How do i get three email addresses to all receive into one mailbox

    We have a family e-mail address that works with 3 variations -
    [email protected]
    [email protected]
    [email protected]
    How do I set Thunderbird so that all come into one mailbox when we receive?
    Also need to have a second mailbox/account for [email protected]
    Trying to get it set up so it operates a bit like our Windows Live Mail (but without the WLM glitches!)

    <blockquote>
    [email protected] [email protected] [email protected]
    </blockquote>
    Are these alias addresses belonging to the same email account (i.e. same password)?
    Are all three using POP?
    <blockquote>
    Also need to have a second mailbox/account for [email protected]
    </blockquote>
    Run the new account wizard and set up the account.

  • HT1473 When downloading a CD album, if it contains different artists, the album is split up into separate albums/icons. How do I get all songs into one album (just like the original CD)?

    When downloading a CD album, if it contains different artists, the album is split up into separate albums/icons. How do I get all songs into one album (just like the original CD)?

    Generally, in iTunes, all you need to do is fill in an appropriate Album Artist to keep things together. For older iPods each track from the same album should have the same artist, or be marked as a compilation where appropriate. For iOS devices you may need to go to Settings > Music > Group By Album Artist > On.
    For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
    tt2

  • I have one itunes account, but several itouch apparatus that belong to kids, how do I keep their cloud stuff separate, or does it all go into one cloud?

    I have one itunes account, but have several itouches that belong to the kids.  How do I keep the cloud's separate, or does it all go into one, because of the one acccount?

    All devices under the same Apple ID will have one iCloud. If they are over 13, they can create their own Apple IDs, or you can just turn everything off under Settings > iCloud on the iPods.

  • Export multiple tables into one flat file

    I have data in multiple tables on a processing database that I need to move up to a production database. I want to export the data into a flat file, ftp it to the production server and have another job pick up the file and process it. I am looking for
    design suggestions on how to get multiple tables into one flat file using SSIS?
    Thank You.

    Hey,
    Without a bit more detail, as per Russels response, its difficult to give an exact recommendation.
    Essentially, you would first add a data flow task to your control flow.  Create a source per table, then direct the output of each into an union all task.  The output from the union all task would then be directed to a flat file destination.
    Within the union all task you can map the various input columns into the appropriate outputs.
    If the sources are different, it would probably be easiest to add a derived column task in-between the source and the union all, adding columns as appropriate and setting a default value that can be easily identified later (again depending on your requirements).
    Hope that helps,
    Jamie

  • How to export all tracks into audio files with the same duration

    Hi everybody.
    I am trying to export all the tracks into different audio files.
    It's 10 soft. instruments and an audio track. I tried with "File>Export>All Tracks as Audio File but the result is 11 audio files with different lengths. As the song is 3 minutes and 20 seconds I would like every single track to be 3.22 sec long.
    How do I do it? In fact, each track is composed not only by played instruments but also by moments of silence.
    Thanks!!
    Alessandro

    sambino wrote:
    I tried with "File>Export>All Tracks as Audio File but the result is 11 audio files with different lengths. As the song is 3 minutes and 20 seconds I would like every single track to be 3.22 sec long.
    The files are different lengths because each instrument does not stop playing at the same moment. It would accomplish nothing other than waste disk space if Logic appended silence to the end of each file in order to make each track the same length. The different lengths you see mean nothing because the absence of appended silence means nothing.
    each track is composed not only by played instruments but also by moments of silence.
    Naturally. And that silence is accounted for in your exported files, when the silence appears at the beginning of the track, and when it appears during the track. It just isn't appended at the end because that would be pointless. Consider this project, consisting of four tracks:
    When I use the command File > Export > All Tracks as Audio Files, Logic will produce four files that look like this:
    The files are not equal in length, which is perfectly fine. What's important is that they all start at bar 1, and will align properly when imported into some other program. So all you need is the command you already used: File > Export > All Tracks as Audio Files. In one step, it will produce all the files you need, and it will produce them correctly.
    By using Bounce, you would be gaining nothing except extra work, because you would have to do it separately for each file you wanted to produce. With Export > All Tracks as Audio Files, you get all your files with just one command.
    iSchwartz wrote:
    exporting tracks means that any panning or automation will not be rendered. So if you want the engineer to put up all of your tracks at unity gain (all faders at zero) and have your tracks & stems reproduce the mix you're hearing at your studio, use bounce, not export.
    If you want to have your tracks & stems reproduce the mix you're hearing at your studio, there's no need to go to the extra effort of using Bounce instead of Export. You only need to enable (in the Export dialog) the checkbox "Include Volume/Pan Automation." This is explained on p. 1022. When you do this, any panning or automation will indeed be rendered.

  • Exporting all sequences in a project

    Hey all,
    I have several dozen sequences, some short in length and others long. I need to export all of them, but in order to save time, is there a shortcut or something alike to command premiere to send all sequences to adobe media encoder?
    Thanks for the help yall!
    Hardware Specs:
    Windows 8 Pro (64-bit)
    HP Pavilion h8-1230z
    AMD-FX8150 3.59Ghz 8 core processesor
    16GB RAM
    600W PS
    EVGA Nvidia GeForce GTX 550Ti
    Software Specs:
    (Adobe Production Suite CS6)
    Premiere Pro CS6 6.0.3

    The actual sending to AME will have to be one at a time.  But once you set up the Export Settings dialog, it should stay at those same settings so all you have to do is hit Queue for each successive sequence.

  • Is it possible to export multiple sequences as one FLV?

    My Premiere Pro project contains multiple sequences that I'd like to export to one FLV file. But the Adobe Media Encoder export settings for "range" only has the options of exporting entire sequence (the current sequence I'm working on) or exporting the work area. So I'm having to export each sequence to its own separate FLV file.
    Is there any way to export all of the sequences together to get one FLV file? If there isn't a way to do this, is it possible to somehow join my sequences?

    Sequences puzzled me for a while. Just create a new sequence and then drag the sequences you already have directly from the project window (the icons look like a couple of timelines) onto your new sequence timeline - they then show there as a single video and audio tracks butted together

  • How can I combine all buttons into one layer?

    I have 5 movie clip buttons in 5 separate layers. Is there a way to merge them all into one layer? i did that and they stop working.

    i want to make a zoomable map with buttons on them.
    also, if i want to animate every button on I dont want to have to tween every layer.

  • Sort ALL tracks into one album while listening to nano

    I have tried to sort all the tracks into one album to listen to the complete CD without having to keep choosing every song individually while on the nano.I have tried everything, sorting it by album/album and artist and also renaming the artist feat. so and so... can somebody please help me with this issue. Thanks!!!

    Hello Jr45,
    And welcome to Apple Discussions!
    Instead of having me try to explain this one, check out this wonderfully written article by another forum member turingtest2 on organizing content in iTunes. It should be able to assist you with this situation.
    http://samsoft.org.uk/iTunes/grouping.asp
    B-rock

  • Script for exporting all stories to one RTF file

    Hi, I've been searching for this as I know it's been asked before, but I haven't had any luck finding it yet: Wasn't there a script that someone developed which would allow you to export all stories from an InDesign document into a single RTF file? Or is that wishful thinking....
    Thanks, Phyllis

    http://www.kahrel.plus.com/indesign/batch_convert_cs3.html
    Kasyan

  • Export all tables except one table

    i have db with more than one user
    i need to export all tables in DB except one table

    Hi..
    As you are on 10g , use EXPDP with EXCLUDE parameter
    [http://www.oracle-base.com/articles/10g/OracleDataPump10g.php]
    HTH
    Anand
    Edited by: Anand... on Mar 26, 2009 9:54 PM
    Edited by: Anand... on Mar 26, 2009 9:59 PM

Maybe you are looking for