Export and Imoprting Master and Work Repositories:ODI11g

Hi All,
I have exported our development master and work repositories from ODI as zip files.
IDs of Development master and work Repos are 1 and 2 respectively.
We are NOT using common Master repository across environments,
In test Environment DB I have created 2 schema for testing master and work repository.
While importing the master repository FIRST time in to testing ,I followed this :File->New->Master Repository Import wizard.I gave new ID 22 for master repository for testing and proceeded and it has gone through and i am able to see all topology details.
1)How to import work repository into testing work repository,when i connected with master repository of testing, the designer window is disabled.
Should i create new work repository manually with same ID as of DEV or with different ID and then import into the work repository?
Whats the impact if i am going to create work repository with same ID or different ID?
Please Help me,
Thanks,
Kumbar

Hi Sutirtha,
thanks for your repply,
I have created master repository with ID 22 in Test Env, and created testing WORK repository WORKREP11TEST with ID 23 in this master repository and connected with WORKREP11TEST, while importing Dev work repository WORKREPO which has ID 2 into WORKREP11TEST, i am getting a pop up window saying that
"The work repository 2 is not declared in this master repository ,would you like to declare it?If you refuse, the current import will be cancelled"
what is this actually, i click OK and went ahead, is any impact of this
after importing ,i have re-checked the ID of WORKREP11TEST which shows 23 , this seems to be correct i guess,
please clear me this,
Thanks,
Kumbar

Similar Messages

Master and work repository grouping

Hi , what is the most efficient and industry standard model of grouping master and work respository.
. is it good to group master and related work for every technology like DB2 , SQl server etc ?
or
is it good to group master and related work repository depending on the project where we can have different technologies grouped in single work repository and multiple work repository for different technologies. ?
Please share with me with your company standard or views on my above question.
Thanks
Dev

As far as I know it is not recommended solution to create both master and work repositories in one Oracle schema, better create them as separate schemas.

Master and work Repository

Hi,
Can we create Master and work repository in one oracle schema.
And can we create work2 respository in oracle schema2.
Do we find any issues later.
Please advice

As far as I know it is not recommended solution to create both master and work repositories in one Oracle schema, better create them as separate schemas.

How to create a new master and working repository

We have a working env - with master and working repositories .
we have solution for this env .
I want ti create a new environment for a new version - and to create new master and working repository from the old environment .
I tried several options but with no success .
Please help me to understand how can this be done ?
Thanks
Tamar

What options have you tried with no success ?
Do you want to selectively release / migrate code from one env to the new one or will a clone of the working environment be sufficient? If you clone - you wont be able to selectively move updates across.

FCP 7 lost sequence after exporting - auto save vault not working

I started a project a couple of days ago. Today I worked from 11.00 - 20.00 hrs. I exported at 20.00 hrs. to compressor (i got a self contained compressed .MOV file out of that pffff)
But then, returning to FCP 7, the sequence I exported (and worked on all day) was completely empty. Everything in the project folder is still there, but the cuts / edits in the main sequence i worked on are all gone.
Inside the Auto Save Vault are only four saves from between 11.00 - 11.30 hrs. (not properly every 5 min.) and one from 20.00 hrs. The one from 20.00 hrs. is a version that also has the empty sequence. The whole afternoon FCP 7 seems to have made no auto saves, even though i set the Auto Save Vault to "every 5 min." in the preferences. Auto Save Vault files (of this same project) from a couple of days earlier are all there inside the Auto Save Vault folder.
Tried already: Looked inside the other two locations where i have autosave folders of other projects but the files were not there either.
Had a Tiff in the sequence, and a couple of very simple text-motion things.
Can anybody tell me whats going on?
And if there is a way to retrieve?
Never had this before, is this a FCP7 Yosemite issue?
Thanks in advance!

could be a yosemite issue. Hard to know. fcp was never meant to work in Yosemite, so it's hit or miss.
Autosave misbehavior can happen and resetting your fcp preferences usually solves the problem. Digital Rebellion makes a great utility to reset your preferences (and it's free).
www.digitalrebellion.com

Minimum things required to take master and work repository backup.

how to backup the master and work repository?

Hi,
In 11g, under topology you can click the top-right icon and select export. You'll be able to export the master and the work repositories.
You can also use OdiExportMaster and OdiExportWork tools in a package/procedure/bash script to schedule a daily backup.
A last alternative is to backup the database schema(s) containing your master/work reps.
Hope it helps,
JeromeFr

Export and Import of master repository - error snpuser not found

We had installed ODI on a windows server and created physicla and logical topologies etc and developed some models and projects.
But we had sone all of this while still pointing to the demo master repository using the HypersonicSQL. This means we always have to have the 'Start Demo Agent' running etc.
So we wanted to move to an Oracle based master repository. I have used the 'Create Master Repository' function to create a new repository using ORacle thinnet driver and this is all OK and I can sign in to the SUPERVISOR user.
But when I export our existing repository from the 'HypersonocSQL' demo one to a ZIP file and then use the 'Import Master Repository' to create a master repository in the Oracle using thinnet driver etc - firstly it removes the repository details that I originally created - fair enough - then creates it all again but from the ZIP file.
The SNP_ tables all exist in the oracle database user and I can see that in SNP_USER there is the record for SUPERVISOR etc.
But when I try to sign in to this through topology manager or security manager - as SUPERVISOR I immediately get the error 'SNPUser does not exist'
Am I doing something wrong with exporting my 'demo' master repository and trying to import it in to the new Oracle repository ?

thanks - but that is effectivley what I did - used the repository import from my exported ZIP file - and it all imported OK - but the error on login to topology manager afterwards is that the snp user does not exist.
Although I initially used the 'Master Repository Creation' I then adaondoned this - dropped and recreated my Oracle user 'snpm' that owns the master repository and used the import repository approach.
I am trying to sign in as the standard SUPERVISOR user (that existed OK in the Hypersonic master repository that was exported to the ZIP file) and also trying other users that I know existed in the Hypersonic reporitory that I exported - same problem. I can see in Oracle SQL*Plus that in the SNP_USERS table the SUPERVISOR user exists.
If I do instead carry out a standard 'Create Master Repository' and do NOT try to import anything then it works OK and I can sign in to the Topology Manager as SUPERVISOR.

Master and work rep in same schema

Hi
What happens when master and work repository are in the same schema. I did all my development only to realize master and work are in the same schema..
Its working in now.. What happens when I migrate to different environment
-app

Do you need to have a development work repository at Test environment?
That add the risk of something be changed at test and not at the real development....
Any way, for what you need, you can:
1) export the work repository
2) create a new repository from topology in a new database schema
3) import (from step 1) into this new created repository.
That will separate.

Master repo,Work Repo and ODI installation

Hi,
I have following doubts for windows flatform.
I am integrating two application systems say A(source) & B(Target) thier data located in different oracle db servers.
1) ODI server installation will be on source server/target/any other machine?
2)Where should i create master & work repositories on source/target server?
3)If my target is remote host then where can i install and run agents?
4)While creating physical schemas we can select the work schema as different,is this work schema acts like staging area? while designing the interfaces should i select this work schema as staging area? what is benefit of having this work schema different than my soruce/target schema.?
5) I read that ODI will create temparory tables while executing ODI objects each time and these tables are junk data,should i drop all these temp tables in work schema,even after or before execution of the interface?
Please clarify,
Thanks.
MNK

Hi,
Find my answers as below,
1) ODI server installation will be on source server/target/any other machine? Its always recommend to install ODI in your TARGET server for good performance.
2)Where should i create master & work repositories on source/target server?In TARGET server and make sure u have dedicated schema for work and master repos.
3)If my target is remote host then where can i install and run agents?Again in TARGET host , u can only install ODI run time agent in seperate servers, have a look at ODI installation guide.
4)While creating physical schemas we can select the work schema as different,is this work schema acts like staging area? Yes ODI will make use of work schema to create temparory tables ($ tables) and which will act like a staging area.
while designing the interfaces should i select this work schema as staging area? No need to select any work schema as such while designing interface, only u need to select the respective LOGICAL schema which implicitly create the $ tables in the work schema u selected in PHYSICAL schema.
what is benefit of having this work schema different than my soruce/target schema.? You will not require to have a dedicated "staging area" to consolidate your data from multiple/single source.
5) I read that ODI will create temparory tables while executing ODI objects each time and these tables are junk data,should i drop all these temp tables in work schema,even after or before execution of the interface?No need. ODI will take care of DROPPING and CREATING $ tables on FLY.
For simple data integration, 2 tables will be created at runtime, C$ and I$ which in turn will be dropped after loading to TARGET table.
Makes sense?
P.S: Experts comments are welcome.
Thanks,
Guru

"Unavailable master images cannot be exported.The selected master image is either offline or not found. Please reconnect it and try again."

I have imported my iPhoto library onto Aperture, and then deleted the iPhoto library so not to have any duplicates. Now, the images on Aperture are pixelated and when I try to export them the following message appears: "Unavailable master images cannot be exported.The selected master image is either offline or not found. Please reconnect it and try again." What does this mean? How can I get my photos "online" so that I can see them as they used to be?

How did you import your iPhoto Library? I assume, you used "File > Import > iPhoto LIbrary", but how did you set the "Store Files" pop-up menu?
If you chose to "Store Files in their current location", then you did not actually import the master image files into Aperture, but referenced them inside the iPhoto Library. In that case, you just deleted all your images, when you deleted the iPhoto Library. And if you did that, and your iPhoto Library is still sitting in the Trash, put it back; then your Aperture Library should work again. Or restore the iPhoto Library from your most recent backup and put it into the exactly same location where it used to be.
If you used a different "Store Files" setting, please explain where you have chosen to store the master image files. This will help to track down your images.
After restoring your master image files you may need to reconnect them to the versions. Post back, if you need help with that.
Regards
Léonie

Change master repo and work repo connection password

Hi,
My ORACLE DB password expired and i changed it. But now my ODI is not working.
The oracle user - system and odi connection - system and pwd are same while creating the work and master repo.
How can i change the master and work repo password? My situation is in ODI screen connect to repo > it throws error of password failure.
Please help.
Thanks,
Arun

For the sake of repeating myself again update the password ODI uses to connect to the repository in the connection profile of the ODI Studio login with the new password you created via SQL PLUS. To make it even easier take a look at the following:
When you initially try to connect to the repository you get this screen
Click the Pencil icon (Edit) to bring up the connection profile details screen
In the section for Database Connection (Master Repository) change the password to your new repository password.
If the work repository password has also been changed at this point you will have to select the Master Repository Only option and then Test the connection which should now work.
Click OK and then OK on the login screen.
*** Do this if Work Rep password has also changed ***
Once successfully logged in goto the Repositories tab in the Topology Manager and update the Work Repository connection details with the correct password.
Logout of ODI and edit the Connection Profile to renable the association with the chosen Work Repository then re-login.
Pretty strightforward all in all.

Should Master Repository and Work Repository be of same Technology??

Hi Experts,
Is it mandatory to have Master Repository and Work Repository to be in same Database???
I have created My Master Repository in Oracle and My Work Repository is in MSSQL.
I am facing some issue while creating Physical Schema.
Is it because of different technology for master repository or work repository??
Please let me know how to debug as it is urgent.
Thanks and Regards,
Andy

Hi Andy,
Once there is no "physical" link between the repositories (like a FK for instance) there is no problemn to have distinct technologies.
I already done projects in this way. What are the issues that you are facing?

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. what is the easiest way to do this? i have tried export and import but it didn't seem to work.

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. my goal is to store them in an external hard drive so it doesn't use up memory on the mac hard drive. is it possible to copy the specific projects without copying the entire library? what is the easiest way to do this? i have tried export and import but it didn't seem to work.

What do you not understand?
You can duplicate the iPhoto library (command - D ) and delete everything except the project and its photos from the copy and move that
Or
However the calendar takes very little space - it is simpy database entries - it is the photos in the calendar that take space - and for most people you would wnat to keep those photos in your library
you can use a photo in 50 calendars and it still is only one photo in your library - as I explained calenders do not exist as such - they are simply database entries telling iPhotop how to display the calendar - they take almost no space at all
LN

Crystal Reports export and print fails with SSL / https but works with http

Windows 2008 Server, 32-bit (IIS7)
ASP.NET 2.0
Ajax 1.0
Crystal Reports version 10.5.3700.0
http: printing works, export works
https: printing not working, only export to MS Excel and MS Word work.
I am able to generate reports using both http and https, and the toolbar icons are all showing. However, I am unable to print or export properly with SSL.
Printing prompts me with a select printer window, and then a window 'Retrieving Page 1' follow by two messages from Crystal Print Control both stating:
A communication error occured. Printing will be stopped.
Exporting generates various errors depending on which export method is being selected (however Excel and Word work over https).
I've found the same problem on this site and other forums, but never a resolution to get exporting and printing to work with SSL. Will someone please provide me assistance or possibly relay what settings they're using if they have Crystal Reports export or printing working over SSL in IIS7? Everything works fine when I change the address from https to http.
Please let me know if I can help by providing further information. We've gone through a great deal of possible solutions with code and I'm currently looking in to IIS settings again.
Thank you.

Thanks Ludek. I got it by searching KB number.
Unfortunately, it didn’t fix my problem even my IE (IE8 and IE 9) has correct setting. I double check my version. PrintControl.CAB is version 10.2.0.1146. we use VS 2005 Crystal report and VB .NET. It works fine on HTTP. But when we use HTTPS (SSL Certificate from go daddy).
1: Crystal report export
            Export to MS Excel, Word: pop us “File download”, then click “Save”. It says “Internet Explorer cannot download ReportView.aspx from my site. Internet Explorer was not able to open this internet site. the requested site is either unavailable or cannot be found. Please try it again later”
            Export to RPt, Rich text format: It says “Internet Explorer cannot download ReportView.aspx from my site. Internet Explorer was not able to open this internet site. the requested site is either unavailable or cannot be found. Please try it again later”
            Export to PDF : nothing happened.
2: Print:
            Pop up dialog to select printer, click “Print” “. Shows windows “Crystal Report Viewer” and pop us error message box. Title is “Crystal Print Control”. Message is “An communication error occurred. Printing will be stopped”. Click “OK” and pop up error message box again.
Please advise.
Thank you very much!

Export and Imoprting Master and Work Repositories:ODI11g

Similar Messages

Maybe you are looking for