Export and import change document for user master data

Dear Gurus,
I have two queries on change document for user master data:
1. Are there any approaches to export and import change document for user master data?
We often do system copy from PRD to QAS for UAT and troubleshooting. Before system copy we export the user master data from QAS and then import after the copy process. We would like to keep the change document for user master data on QAS from being refreshed from PRD for security reason.
2. Change document for Role change in QAS
When the role is created or modified in DEV and then transported to QAS, the role change document doen't include this change log. The role change document in QAS only records those role changes directly made in QAS.
Could you advise this is by SAP design or are there any approaches to record this transported role change in the role change document in QAS?
Thanks
YBY

1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
Cheers,
Julius

Similar Messages

FM for Change Documents For User

Hi all,
We need a Function Module for tracking the changes of a user account. Is there any function encapsulating the functionality supplied by SU01 -> Information -> Change Documents for User?
thanks,
- ferudun

Hi
Try this BAPIs
BAPI_USER_LOCPROFILES_READ
BAPI_USER_GET_DETAIL
Regards
Bala Krishna

Change pointers for HR master data

Hi I am trying to setup change pointers for HR Master data , in relation to HRMD_A06 idoc , I did all the steps for setting up change pointers.
Transaction bd52 for my reduced IDOC shows 0 entries, When i did the same for customer master data , BD52 had some entries by itself .
I can't produce any HRMD_A06 Idocs , What am i doing wrong? Should the entries in BD52 be added manually for all the fields i need?
Any help is much appriciated.
Sudheer

Hi,
guess it's not necessary to see some entries in bd52 (it's enough to activate in bd53).
Do you have configured RBDMIDOC (otherwise no IDocs will get generated).
Or you run t-code bd21 for testing. Standard way is to run the report RBDMIDOC in a periodic background job.
A good description could be found here (p. 12):
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30139fb0-360c-2a10-1e9f-9d5417754983
Regards
Patrick
Edited by: Patrick Koehnen on Aug 12, 2008 3:40 PM

Table to look for change documents for users

Hi friends,
Is there any standard table to look for change documents for a user?change document through SUIM does not give the correct log.
Thanks for you support.

Julius
Looking at another of Tracy's other post (http://scn.sap.com/thread/3598947) she's trying to use ACL. Hence needing to know the tables to write joins/queries to hit tables within ACL
I've seen ACL used and have had the fun experience of Auditors using Google to find tables to perform checks on without context of what has actually been implemented in their particular system.
Regards
Colleen

Change Documents for Material Classification data Changes

Dear Friends,
We have configured custom classification objects for material master and also we are able to maintain the material characteristics using MM01, MM02 and also using ALE interface. But I am not able to find the Change Documents in any of the table CDHDR & CDPOS. Please let me know what needs to be done to capture the change documents for a material classification changes in this case.
Many thanks for you inadvance.
Beast regards,
Mallikarjun.

Change logging of all Classification (including Material Classification) is controlled in the Class type configuration.
SPRO -> Cross Application Components -> Classification System -> Classes -> Maintain Object types and Class types -> Select Object Table = MARA -> Double Click Class Types under MARA -> Select Class Type 001 and Display -> Check whether "Change Docs" check box is checked on.
Also check that another flag "Chg. docs for Class" is set on all Objects under the Class type too (by double clicking the Objects folder for a Class type).
If the Change docs flag is checked on for the relevant Class type and Object then change docs are logged in CDHDR and CDPOS tables for object "CLASSIFY"
Also the "Change docs" flag cannot be set unless the "Multiple objects allowed" flag is also set in the Class type configuration.
Please refer [SAP Note 65124 - Classification Change Documents|https://service.sap.com/sap/support/notes/65124]
Also the above note says and I quote: If "Multiple objects allowed" indicator is not set, start the RCCLUKA2 program. The classification data are converted and the indicator 'Multiple object types allowed' is set. Now you can set the indicator 'Change documents' in Customizing of the class type. However, it only says that change documents are generally possible for this class type. Therefore you have to select objects under 'OBJECTS' for which the change documents are to be written.
So if the Class type doesn't have "Multiple objects allowed" set (along with Change docs flag not set), there is also a conversion that needs to be run using program RCCLUKA2.
Also when you transport the configuration to a target system, the program RCCLUKA2 should be run again, refer [Note 379180 - Classification data disappeared|https://service.sap.com/sap/support/notes/379180 ]

Change pointer for HR master data is not getting generated in table BDCP

Hi,
I have done all the required configuration for change pointer for HR master Distribution and it was working fine few days back. Now suddnly it has stopped working.
Can anyone assist me on how should i debug it.
Thanks
Sunil Singh

Hi Shital,
Thanks for your Reply.
I am not able to find that path in SPRO
Basic Functions-> application Area
And Also My change pointer configuration was working properly and it suddenly stopped working.
I mean to say all the required settings was done previously.
Anyways kindly let me know how should i proceed.
Thanks
Sunil Singh

Delta and Full process chain for same master data target.

Hi Friends,
Can I do full update and delta update through process chain for same master data target and from same source ?
Regards
shekar reddy

Hi Sriram,
why you want to load full and delta for same master data object?
you can achieve this but make sure that you select repair full option for full load IP.
you have this option in scheduler in menu bar
Regards,
Venkatesh

How to export and Import table of another user from user system using expdp

Hi All,
How to export a table 'scott.emp' from system user.
expdp system/password directory=expdp dumpfile=scott_emp.dmp ???? ?? tables=emp ??????????????????????????
thank you
---------------------------------------------------------- Posting solution here to make needed users not to scroll down ------------------------------------------------------
Finally I got it right!!!
Task :- Export table_1 of schema_a from database db1 and Import it to schema_b of database db2 as user other than schema owner
Solution :-
expdp system/pwd directory=expdp tables=schema_a.table_1 dumpfile=schema_a.table_1.dmp logfile=expdp_schema_a.table_1.log
impdp system/pwd directory=expdp tables=schema_a.table_1 dumpfile=schema_a.table_1.dmp logfile=impdp_schema_a.table_1.log remap_schema=schema_a:schema_b remap_tablespace=table_1_tablespace:schema_b_tablespace
Thank You All
Edited by: Ven on Mar 9, 2011 7:52 AM

Just a example
SQL> $expdp system/sys directory=data_pump_dir dumpfile=tests.dmp tables=scott.emp
Export: Release 11.2.0.1.0 - Production on Tue Mar 8 10:39:57 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Starting "SYSTEM"."SYS_EXPORT_TABLE_01": system/******** directory=data_pump_dir dumpfile=tests.dmp tables=scott.emp
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 64 KB
Processing object type TABLE_EXPORT/TABLE/TABLE
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
. . exported "SCOTT"."EMP" 8.570 KB 14 rows
Master table "SYSTEM"."SYS_EXPORT_TABLE_01" successfully loaded/unloaded
Dump file set for SYSTEM.SYS_EXPORT_TABLE_01 is:
C:\APP\MAZAR\ADMIN\ACEME\DPDUMP\TESTS.DMP
Job "SYSTEM"."SYS_EXPORT_TABLE_01" successfully completed at 10:40:01
SQL>

How to get change documents for Equipment Master Records of a document?

Hi experts,
I need a report for changes of Equipment Master for a document.
There is a way to reach this for every document : Environement - > Display Changes. Then I can get a report for "Changes to Object Links". But this can only show me that which equipments are linked to this document. What I want to search is which documents are linked to the equipment. I want to search with equipment number and get the history of changes for documents, Which documents are attached to this equipments and when did these documents attach to the equipment.
Can I get this report with standard SAP queries / reports? Where can I get this informations? From which tables?
PS: If i run a search with Equipment Master Data form CV04N, I can see which documents are linked to this equipment but I can't see when they are attached.
Thanks in advance.

.. but I can't see when they are attached...
In CV04n,in Object Links tab,provide your search input criteria.Once the results are displayed,navigate to Current Layout button.Herein,move the 'Output Date' value to Displayed Column list.
Once done,you should be able to view the date on which the DIR with associated objects(Eg: Equipment Master) was created.Hope this helps!!
Regards,
Pradeepkumar Haragoldavar

Description of how to export and import add-on for SAP B1 by steps

hello every body, I had created sap b1 form using sap b1 studio and I don't know how to export it as add-on and import it to sap b1, could any one please describe to me in steps how to export it and import it to sap b1 as add-on?

Hi moustafa ,
Connection timed out means that your add-on is not
connecting back to the UI.
Try this code for DI Company Connection..
Private Sub SetApplication()
        '// Use an SboGuiApi object to establish connection
        '// with the SAP Business One application and return an
        '// initialized appliction object
        Dim SboGuiApi As SAPbouiCOM.SboGuiApi
        Dim sConnectionString As String
        SboGuiApi = New SAPbouiCOM.SboGuiApi
        '// by following the steps specified above, the following
        '// Statment should be suficient for either development or run mode
        'sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
        sConnectionString = Environment.GetCommandLineArgs.GetValue(1) '
        'sConnectionString = "5645523035496D706C656D656E746174696F6E3A59313931303035313531383699469FA92C3C9A964A219C5862952A90D911E9" 'Environment.GetCommandLineArgs.GetValue(1)'
        Try
            SboGuiApi.Connect(sConnectionString)
            '// connect to a running SBO Application
            '// get an initialized application object
            SBO_Application = SboGuiApi.GetApplication()
        Catch ex As Exception
            MsgBox("Make Sure That SAP Business One Application is running!!! ", MsgBoxStyle.Information)
            End
        End Try
        SBO_Application.StatusBar.SetText("DI is Connecting now", SAPbouiCOM.BoMessageTime.bmt_Long, SAPbouiCOM.BoStatusBarMessageType.smt_Warning)
    End Sub
Regards,
Sandeep Kr.

Change Logs for customer master data in 3.1 H version

Hello All
Are they any existing reports or change logs for viewing changes to customer master data in 3.1h version. I want to be able to report based on changes made to customer master.
I know there is a good report in 6.0 version for this- S_ALR_87012182.
If I have to develop a custom program for this in 3.1h. Which table I should use? KNA1 or CDPOS.
Any ideas will be appreciated.
Hema.

Hi,
Please check the filter settings maintained for the adapter object CUSTOMER in R3AC1. The same filter settings can be referred in tables Table: CRMFILTAB (R/3) and SMOFFILTAB(CRM) as per srinivas's reply.
Check the sales area of the customer maintained (Sales Area, Division, Distribution Channel etc.) and see if the current filter settings are restricting the customer from getting replicated in CRM. If everything is maintained fine then check for any failure Bdocs in SMW01 or SMW02.
Regards,
K

Character " within record AND as escape sign for FF master data

I have a flat file for attributes for master data. A field for address contains the character ( " ) This is also the escape character for the CSV file. In BI 7, when loading into the PSA, the load aborts because it is trying to split the file in the middle of the record. The 3.5 version of BW loads this file without problem. I have the character included as an allowed special character. What can I do to make BI 7 load the record? Am I missing a setting?

Hi
you can change the operator to some other sign , available at extraction tab of infopackage. make data format to " Seperated with seperator ( for example CSV )" and then change data seperator to some other isgn. I genrally use , .
Make sure while saving the file you save it as csv , comma delimited.
thanks,
Monika

Can we apply attribute change run for datatarget (Master data )

hi,
can we apply attribute change run for datatarget like masterdata where for example i am loading 0pm_order_attr to 0pm_order data target (master data). after successful loading of data, do i have to apply attribute change run for <i>info object</i> 0pm_order or apply attribute change run for 0pm_order in <i>info providers</i> because after successful loading of pm order data, i am trying to load transactional data and it is showing error "No SID value found for xxx record"
pls advice how not to make the error repeat even after successful loading of master data.
Thanks in advance, quick responce is greatly appreciated.

Hi all,
i am in production server and cannot activate the master data 0pm_order which is in info providers directly, is there any chance of activating it with any other option.
coming to attribute change run, i understand that we can apply for master data objects which are there in info providers, am i correct?
i ran attribute change run yesterday for the info object 0pm_order but even after doing that i tried to load transactional data but it was failure with the same error "No SID value found", why i am getting when i found master data loading successful and ran attribute change run for infoobject.

Export and import oracle xe application users

How can i import a user'sexport script using sqlplus?
i make a export with application->export->users to a file exportuser.sql
but when i'm try to import with sqlplus i get
ORA-20001: Unauthorized access (wwv_flow_api.set_credentials).
I need to make a silence creation of users using sqlplus, (not by htmldb), any idea?

Hello
Have a look on HTMLDB_UTIL.EXPORT_USERS - How this works?
For me it works. Import works fine.
Compare your file with the output from my command and check for differences...
Greetings
Sven

How to export and import a document library data to a new sharepoint farm

Hi
i have a sharepoint 2010 farm and has one sharepoint web application
in this application it has a document library and this doc library has a 2000 folders and each folder has 2500 documents
, here i how i export upto 500 folders from this doc library to a new sharepoint farm
adil

if your both farm are on same version level then you can use export & import funcation if only Document library required.
Perform export on source farm
Export a site, list, or document library in SharePoint Server 2010
copy the files to target farm and run the import.
Import a list or document library in SharePoint Server 2010
another way is backup the site collection from source and restore it to destination.
for backup: http://technet.microsoft.com/en-us/library/ee748617(v=office.14).aspxFor
restore: http://technet.microsoft.com/en-us/library/ee748655(v=office.14).aspx
there is always 3rd party tool options.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Export and import change document for user master data

Similar Messages

Maybe you are looking for