Export and Import of Application problem

Hi,
I had my application developed in Windows environment. First time i had full application export and import on Solaris box. The application was successfully installed on Solaris box and i could login into application. The login process was working but all of my queries/reports were not displaying any values. All i can see is number of rows retrieved for example 1-20 etc. I repeated the export/import 3-4 times but results were same.
On Solaris box i opened one of the reports and started playing with it. Luckily on "Reports Attribute" tab i unchecked/checked the show column checkbox. The report started working. Likewise i did for other reports. Just to verify this i repeated the Export/import of application and unchecked/checked the show column and reports started working. I repeated it at least 3 times.
Our application is going to expand everyday and on every import we cannot repeat this step for every report.
Please let me know what steps are missing in Import or are they any manual Post-Import steps ?
Regards
Hamayun

Hi Scott,
Today i applied the patch and now its 1.6.1.02. After applying the patch i imported application once again.
I was able to login into application. When i executed a report the system navigated to required tab but did not show any data. Then i performed following steps:
1.Selected Edit page(xx).
2.Selected region in the selected page.
3.Select Report Attributes tab from region.
4.In Report Column Attributes section the "Show" option was Checked for all the columns which i want to display.
5. i unchecked only ONE COLUMN and CHECKED again the same column. This was done just to apply changes to report.
6. Clicked on Apply Changes to save the changes.
7. Executed the application and the report started working.
8. Likewise i repeated step 5 for all reports in the application.
I also tried another option.
-navigated to Reports Attribute tab and made a change just to save the changes on tab. After saving the page the report started working.
Your help is greatly appreciated.
Regards,
Hamayun

Similar Messages

Language Problem while exporting and importing data

hi,
I have Oracle version 8.1.7.0.0 installed on one server and 9.2.0.1.0 installed on new server.
I'm copying and pasting my version info from SQL*Plus:
SQL*Plus: Release 8.1.7.0.0 - Production on Mon Aug 22 10:46:31 2005
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
SQL>
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Aug 22 12:30:06 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL>
I created new user on my new server from enterprise manager.
Exported user from the old server and imported in the new server.
i.e: from Oracle8i Enterprise Edition Release 8.1.7.0.0, I did
c:\>exp system/manager file=abc.dmp owner=abc
Then on the new server Release 9.2.0.1.0, I did
c:\>imp system/manager file=abc.dmp fromuser=abc touser=abc
I'm using Arabic Language on my both servers. NLS_LANG parameter on both the servers is AMERICAN_AMERICA.WE8MSWIN1252.
On both the servers I'm able to insert and select data in arabic.
However, after I export the data from old server to the new server, the arabic data comes in question marks.
If I create new table and insert arabic data on new server's user abc it is displaying well. Only the data which I exported and imported is not showing arabic.
On both old and new servers operating system is Windows XP.
I'm stuck with this problem. Anybody having any idea about how to solve this problem please help.
Thank you all in advance.
Regards

Let me be clear here. Storing Arabic data in a WE8MSWIN1252 database is not supported by Oracle and will lead to problems. You are incorrectly using the NLS_LANG to prevent proper conversion and your data appears to be okay when you use utilties like SQL*PLUS to view your data. When you write applications that don't rely on the NLS_LANG like JDBC thin driver for instance you will realize your data is in fact invalid. To learn more about the NLS_LANG you can take a look at this FAQ: http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
To migrate your database to a proper character set you can refer to this paper:
http://www.oracle.com/technology/tech/globalization/pdf/mwp.pdf
But please do not ask for help in supporting your current configuration in this forum.

Export and import problems

i have 2 major problems importing my application from htmldb.oracle.com to my serevr at home.
1.
i export my application and thems from htmldb.oracle.com.
when i opened the sql export file i saw that all hebrew chracters was "jibrish".
how can i export my application with hebrew fonts ?
2. i tried to export and import xml data (my tables data).
the export xml file showing me the hewbrew data but when i import it to my tables it gets ????????? instead of hebrew.
i think it's the nls lang but i don't know what nls land i need and where to change it
(database ,enviroment....)
can someone help me with this problems ?
thanks
p.s
my db is 10.1.0.3
red hat linux as 4 on vmware 4.5
my nls parameters:
nls_language: american
nls_territory: america
nls_characterset: we8iso8859p1
nls_nchar_charcterset: al16utf16
thanks

Zvika,
I have two options that may work for you. First, define the fields that have Hebrew characters using the CHAR qualifier. Example, varchar2(30 char). That allows you to store double byte characters from other languages, and overrides the nls_length_semantics (byte default) parameter.
Or, you could set the nls_length_semantics to default to char. It definitely uses more space when the char qualifier is used, so it's probably best to override the byte default only when necessary.
Hope that helps!
Also, I posted the 'Blogging Tool for HTMLDB' question with the username 'aufan89', which I had to change because my email changed.
So my new username is now 'aufan1989'. I look forward to your email when you get your app fixed and posted onto HTMLDB Studio!
Thanks!

SQL Developer 2.1: Problem exporting and importing unit tests

Hi,
I have created several unit tests on functions that are within packages. I wanted to export these from one unit test repository into another repository on a different database. The export and import work fine, but when running the tests on the imported version, there are lots of ORA-06550 errors. When debugging this, the function name is missing in the call, i.e. it is attempting <SCHEMA>.<PACKAGE> (parameters) instead of <SCHEMA>.<PACKAGE>.<FUNCTION> (parameters).
Looking in the unit test repository itself, it appears that the OBJECT_CALL column in the UT_TEST table is null - if I populate this with the name of the function, then everything works fine. Therefore, this seems to be a bug with export and import, and it is not including this in the XML. The same problem happens whether I export a single unit test or a suite of tests. Can you please confirm whether this is a bug or whether I am doing something wrong?
Thanks,
Pierre.

Hi Pierre,
Thanks for pointing this out. Unfortunately, it is a bug on our side and you have found the (ugly) "work-around".
Bug 9236694 - 2.1: OTN: UT_TEST.OBJECT_CALL COLUMN NOT EXPORTED/IMPORTED
Brian Jeffries
SQL Developer Team

Exporting and importing applications/workspaces

I am currently on a testing workspace and want to put the application/workspace to another workspace. I know the export and import commands but my concern is the application import. The application is linked to a sample table caled "Samp" and now I would need to link it to a table called "test". This table is almost eactly the same as "Samp" witht he exeption of 2 or 3 new columns. I am wondering what I need to do to change the link to the new table and whether the application will still work.
Thanks

"419008",
In cases like this, where I know the table name is going to be different across HTML DB instances, what I usually do is create a view on top of the table, and then build my HTML DB applications against the view. Then, assuming the definition of the tables are the same, it should work without further modification.
So in your testing workspace you could have:
create view foo as select * from Samp
and in your other workspace you could have:
create view foo as select * from test
Joel

Export and import the windows phone contacts as .vcf file to the application

Hi, I need to export the windows phone contacts as .vcf file and import it to my windows phone application. I'm unable to import the full details of a contact. Is there any sample code to export and import phone contacts programmatically. Please
help if there is any solution. Thanks.
Nikitha

Found this on the internet:
http://www.lumisoft.ee/lswww/download/downloads/Net/
If you download the Lumisoft.Net.Zip and extract it looks like there is a vCard folder with some classes that may help you.
You will need to use something like that or search a bit more and find a vCard C# Helper library.
Bret Bentzinger (MSFT) @awehellyeah

Export and import problem

hi i am having a test database 9i(9.2.0.1) on windows xp.i want to export a table from test database to development database which is 9i(9.2.0.6) on IBM AIX 5.2. till now i am able to export and import but suddenly i am getting 'TABLESPACE <tablespace name? doesn't exist' error.
the following is what i am getting
D:\>imp file=news.dmp fromuser='COUNTER' touser='IBT' tables='NEWS_MASTER'
Import: Release 9.2.0.1.0 - Production on Sat Oct 6 17:06:00 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Username: system@dev
Password:
Connected to: Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Oracle Data Mining o
tions
JServer Release 9.2.0.6.0 - Production
Export file created by EXPORT:V09.02.00 via conventional path
Warning: the objects were exported by COUNTER, not by you
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
import server uses US7ASCII character set (possible charset conversion)
. importing COUNTER's objects into IBT
IMP-00017: following statement failed with ORACLE error 959:
"CREATE TABLE "NEWS_MASTER" ("NEWS_DATE" DATE NOT NULL ENABLE, "SUBJECT" VAR"
"CHAR2(75) NOT NULL ENABLE, "DESCRIPTION" VARCHAR2(300) NOT NULL ENABLE, "PH"
"OTO" BLOB, "REG_NO" NUMBER(5, 0), "SYSTEM_IP" VARCHAR2(15) NOT NULL ENABLE)"
" PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 65536 FREEL"
"ISTS 1 FREELIST GROUPS 1) TABLESPACE "TESTTBS" LOGGING NOCOMPRESS LOB ("PHO"
"TO") STORE AS (TABLESPACE "TESTTBS" ENABLE STORAGE IN ROW CHUNK 8192 PCTVE"
"RSION 10 NOCACHE STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1))"
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'TESTTBS' does not exist
Import terminated successfully with warnings.
help me i want to know what happend actually?and what may be the solution?
thanks in advance

tablespace TESTTBS doesn't exist in the database where your are importing.
Either create tablespace in target database or
use show=y option while importing to get table structure and create manually in target database then import and give ignore=y.

Is it possible to export and import jsf page and application module?

Hi,
I want to export a application module and then import it to another application,so deos jsf pages.If I can do this ,then my team could do the diffent work at the same time.one group response for data model then commit as application module,one group for page create and edit and so on .Who has any good idea?
Thanks advance
lixinzhu
2007/09/19

hi,frank
thank you.
You know a page include a .jspx file,a page definition file and depend faces-config.xml,faces-config.oxd_faces and other I don't know information,so if i only put the first two file into cvs,but how can i get other information in the last two file?When I get the first two file and needed information in the other file,how can i merge these into new project and let jdeveloper "reconize it"?Applicaion is more complex,it not only depend its self java class,xml and many entity object and view object,how to handle the "export" and "import" process?Just like oracle form,only a fmb is enough,database object only need to "put into database","export" and "import" are very simple,so i need jdeveloper to supply these "import" and "export" function.I'm not familar with cvs,does it can know object dependency like application module?if it can,how to let jdev "reconize" imported in object?
lixinzhu
2007/09/19

Export and import Oracle 10G database

Hello all
Can anyone tell me once for all how can i backup oracle 10G database and restore it in other computer (export and import)
thanks alot
Ron

Do you can access to metalink?
If not, I copy an paste this doc's....
Doc ID: Note:10767.1
Subject: How to perform FULL System Export/Imports
Type: BULLETIN
Status: PUBLISHED
Content Type: TEXT/X-HTML
Creation Date: 18-APR-1994
Last Revision Date: 30-AUG-2002
Purpose
This article highlights some important points to consider when performing
a Full System Export and Import.
Scope and Application
It is intended to assist users performing FULL System Exports and Imports.
A Full System Export and Import is a useful way to replicate or clean up
a database. Please note the following guidelines when performing a Full
System Export and Import:
1. When performing the import, ensure you are pointing at the correct
instance. Always check values for the SID and two task driver before
proceeding.
*Note: On Unix systems, just entering a sub-shell, such as using
C-shell, can change the database that the import would work
against.
2. When possible, it is advisable to take a physical copy of the
exported database and the database you intend to import into before
starting the import. This ensures any mistakes are reversible.
3. NEVER run a FULL SYSTEM IMPORT on a machine that has more than one
database UNLESS you are 100% sure all tablespaces have been
pre-created. A full import will create any undefined tablespaces
using the same datafile names as the exported database. There are
situations where this is very dangerous:
-> If the datafiles belong to ANY other database, they will be
CORRUPTED. This is especially true if the exported database is
on the same machine, because its datafiles will be re-used by
the database you are importing into.
-> If the datafiles have names that clash with existing operating
system files.
4. When exporting, it is advisable to also produce a report showing
information you may need before / after the import:
-> List the tablespaces and datafiles
-> List the rollback segments
-> List a count, by user, of each object type such as tables,
indexes, etc.
This enables you to ensure that tablespaces have been pre-created
and to check the success of the import after it is complete.
5. If you are creating a completely new database from an export, remember
to create an extra rollback segment in SYSTEM, and make this available
in the init.ora file before proceeding with the import.
6. There are some versions of export that do not retain sequence numbers
correctly. It is advisable to select next_value for each sequence
after the export so that these can be checked after import.
Following these guidelines will help you to avoid major problems.
Doc ID: Note:174226.1
Subject: How To Copy an Oracle Database To Another Machine
Type: HOWTO
Status: PUBLISHED
Content Type: TEXT/X-HTML
Creation Date: 12-OCT-2001
Last Revision Date: 01-OCT-2003
goal: How to copy an Oracle database to another machine
fact: Oracle Server - Enterprise Edition
fix:
Pre-requisites: The copy is between 2 machines, both have to be on the same OS
and have to have exactly the same database version installed.
1. Make sure the database you want to copy was closed with a SHUTDOWN IMMEDIATE,
SHUTDOWN NORMAL or SHUTDOWN TRANSACTIONAL.
2. Copy init.ora and control files to create instance and be able to go in
mount mode. Check the init.ora for the locations where the controlfiles have
to be, if those locations are not valid on the machine put the control files on
different places and adjust the init.ora accordingly.
3.a. Copy the datafiles (all of them).
b. Copy the redo-logfiles (all of them).
4.a. (Unix only) Set the environment variables:
ORACLE_SID - set to the database name you wish to create
ORACLE_HOME - set to full pathname of the Oracle system home directory
PATH - needs to include $ORACLE_HOME/bin
b. (NT/2000 only) Do 'set ORACLE_SID=<SID>'
Use oradim to create the service for the instance. For more information
on oradim please refer to (the part that refers to creating a new instance):
Note:68720.1 Creating a new 7.3, 8.0, 8.1 Instance/Database
5. Use servermanager (check the name to use for your version of oracle) or
sqlplus (version 9i and above) to startup the database in mount mode.
Do
CONNECT INTERNAL/<PASSWORD>
then
STARTUP MOUNT
Then do a rename of the copied datafiles if they are not in the same path as on
the other machine. For all the files that are in the result of the query:
SELECT NAME FROM V$DATAFILE;
do
ALTER DATABASE RENAME FILE '<oldfullpath>\<filename>' to <
newfullpath>\<filename>';
6. Query the datadictionary for the old location of the redolog files using:
SELECT MEMBER FROM V$LOGFILE;
If the new place is not the same as the old do:
ALTER DATABASE RENAME FILE '<oldfullpath>\<redologfilename>' to &
lt;newfullpath>\<redologfilename>';
7. Now open the database:
ALTER DATBASE OPEN;
******************************************************************

Howto Export and Import CAF project

Hi,
Is there a way to export and import my CAF projects to more than one installations of NWDS? I've tried different ways but the main problem is that I can't see the "imported" projects in the Composite Application Explorer of the CAF perspective in NWDS.
The only way I've managed to do this is to create a new CAF project with the same name as the one I want to import and copy all files into the newly created structure but surely there must be an easier way to do this, or??
Best regards,
Mikael

Does this solution still apply?
I want to export a CAF project from NWDS 7.10 and import it into NWDS 7.20.
If there are any breaking API-changes, this is no problem as I can fix it later.
However I need to transport all BO and Service-Definitions and the (possibly outdated/deprecated) code.
I cant get it working with your linked document.
Any hint appreciated. Thanks alot!
Kai

Require help in understanding exporting and importing statistics.

Hi all,
I am bit new to this statistics.
Can anyone please explain me in detail about these commands.
1) exec DBMS_STATS.GATHER_TABLE_STATS (ownname => 'MRP' , tabname => 'MRP_ATP_DETAILS_TEMP', estimate_percent => 100 ,cascade => TRUE);
2) exec DBMS_STATS.CREATE_STAT_TABLE ( ownname => 'MRP', stattab => 'MRP_ATP_3');
3) exec DBMS_STATS.EXPORT_TABLE_STATS ( ownname => 'MRP', stattab => 'MRP_ATP_3', tabname => 'MRP_ATP_DETAILS_TEMP',statid => 'MRP27jan14');
4) exec DBMS_STATS.IMPORT_TABLE_STATS ( ownname => 'MRP', stattab => 'MRP_ATP_3', tabname => 'MRP_ATP_DETAILS_TEMP');
I understand that these commands are used to export and import table statistics.
But please anyone help me in understanding this indetail.
Thanks in advance.
Regards,
Shiva.

Shiva,
Please post the details of the application release, database version and OS.
Please see (FAQ: Statistics Gathering Frequently Asked Questions (Doc ID 1501712.1) -- What is the difference between DBMS_STATS and FND_STATS).
For exporting/importing statistics summary of FND_STATS Subprograms can be found in (Doc ID 122371.1)
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_details?c_name=FND_STATS&c_owner=APPS&c_type=PACKAGE&c_detail_type=source
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_details?c_name=FND_STATS&c_owner=APPS&c_type=PACKAGE%20BODY&c_detail_type=source
Thanks,
Hussein

Exporting and Importing Destination Controls Error

When I export table within destination control and import the table to another Ironport again within destination control I receive error - "Wrong format of the destination config file: ip_sort_pref is required for the global settings."
We are updating the ASYNC on each of our de clustered Ironport. So when one is not in use we need the other to handle all the traffic, including domain controls.
The output displays
[ABCDE.com]
max_host_concurrency = 500
limit_apply = system
limit_type = host
max_messages_per_connection = 50 ......
How can I import this without losing or altering the data within.
^^^^^^^^^^^^^^^^^^^^^^
Solution
We upgrade one of our SMTP ASYNC to 8.0.1 which creates a additional line within default of the upgraded Ironport exported control destination table that is named... wait for it.... ip_sort_pref. Just add it.

The applications and drivers have been imported into the Dev SCCM server however I cannot find the actual content so I am not sure this has worked properly.
When you exported did you choose to "Export all content for selected task sequence and dependencies".
80070003 = The system cannot find the path specified.
See here for exporting and importing task sequences
http://blogs.technet.com/b/inside_osd/archive/2012/01/19/configuration-manager-2012-task-sequence-export-and-import.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Error when exporting and importing TS

Hi I am running SCCM 2012 SP1 and am trying to export a Task Sequence including with the Windows 7 wim, the boot wim, some applications and drivers. When I exported the TS I selected to export dependencies and content.
I have setup dev SCCM environment (same spec as production) and am trying to import the .zip that was created when I completed the export. When doing the import I am getting the below error on both the Windows 7 wim and the boot wim :
Error Imported Operating System Image (1):
Create new Windows 7 Enterprise x64
Generic failure
instance of SMS_ExtendedStatus
Description = "Failed to get the image property from the source WIM file due
to error 80070003".
ErrorCode= 2147942403;
File="e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\
\sspimagepackage.cpp";
Line = 483;
Operation = "Putinstance";
ParameterInfo = "";
ProviderName = "ExtnProv";
StatusCode = 2147749889;
The applications and drivers have been imported into the Dev SCCM server however I cannot find the actual content so I am not sure this has worked properly. I am wondering if I would be better off using the Migration wizard to take the TS and
content across. Would appreciate any advice on either a) how to fix the issues with the importing of the TS or b) whether I should just be using the migration wizard.
Thanks
G

The applications and drivers have been imported into the Dev SCCM server however I cannot find the actual content so I am not sure this has worked properly.
When you exported did you choose to "Export all content for selected task sequence and dependencies".
80070003 = The system cannot find the path specified.
See here for exporting and importing task sequences
http://blogs.technet.com/b/inside_osd/archive/2012/01/19/configuration-manager-2012-task-sequence-export-and-import.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

DHCP Server does not work after Exporting and Importing Using Netsh Command

Hello Friends :
I had two dhcp servers in windows server 2003 server , I have upgraded one of them to windows server 2008 32 bit and again i installed a windows server 2008 R2 as an additional Domain Controller , the last scenario was like this :
srv-1 : windows server 2003 + DHCP = working with no problem
srv-2 : windows server 2003 + DC + DHCP = Worked without problem
srv-3 : windows server 2008 R2 + DC = worked without any problems
I exported the DHCP server configuration on the srv-2 using netsh dhcp server export and Imported them to srv-3 using the
netsh dhcp server import command , the command completed successfully and i can see all of the scopes without any problems and errors , i have authorized the new server without any problem , all scopes are activated without any problem so i
disabled the srv-2 DHCP service and unauthorized it from active directory , the problem is that the new server semms that does not lease any address to clients !!!
1- I have authorized it
2- I used Rogue Checker tool in client computers they see authorized server without any problems
3- The same tool in workgroup only shows srv-1 as the DHCP server and does not see other DHCP servers
4- Bindings are OK and DHCP servers only have one NIC installed on them
What can i do to make sure my srv-3 DHCP server will work on the network ?
thanks ...
MIMO

Are the clients on another network so you need to configure a DHCP relay agent?
If you load up perfmon on the dhcp server and remove all counters and then add DHCP counters. Do you see any dhcprequests when you reboot your dhcp clients? This will determine if your server actually receives any dhcp requests.
Have you check event viewer for any warnings or errors?
And the classic one restarted the dhcp server service (or reboot)?
Regards Per-Torben Sørensen http://pertorben.wordpress.com/

Export and Import of Access DB tables in Apex

Hi,
i need help.
I wanna export an MSACCESS DB Table into an ORACLE DB 10g2.
but every time i get an error course my ODBC driver which isnt compatible to my tns service name.
what could i do?
i only want to export a table..not the whole database.
if i want to export and import a Table over a XE Version, there are no errors and i could see the table in APEX.
...thx for help :)

Hi Timo,
If you open your table in Access, and click the "select all" (the empty grey box at the left of the header row), you can copy the entire table and paste it into Apex as though you were copying from Excel - the structure of the copied data is the same. The only thing is that you will be limited to 32,000 characters.
Obviously, though, getting hold of, and setting up, the correct ODBC drivers is the more proper solution but the above may solve your immediate problem.
Regards
Andy

Export and Import of Application problem

Similar Messages

Maybe you are looking for