Export and import of mapping invalidates it
Hi All,
In Development environment I've built a mapping which validates well, deploys well and executes well.
Now I export it (mdl) and import it on Production environment. When I try to validate it runs into an error.
When I open the mapping I see that the JOIN operator has undergone a change. Normally it shows (from top to bottom) all ingroups and then the outgroup.
The imported version on Production however show first the outgroup and then all 3 ingroups.
When I check the intermediate result of this it's completely wrong.
When I check the JOIN condition, it has been messed up.
Has anyone experienced this before and is there a way to avoid it?
Thanks, Patrick
ps1 All underlying objects used in the mapping are valid.
ps2 Simply altering the JOIN statement is not enough, basically I have to throw away the entire JOIN operator and build it all over again.
Hello, this happeded to me also. Apparently when you add/drop groups in a join operator, sometimes it isn't imported correctly over a pre-existing version. Have you tried dropping the mapping before importing ? I remember this solved it for me...
Antonio
Similar Messages
-
Export and Import of mappings/process flows etc
Hi,
We have a single repository with multiple projects for DEV/UAT and PROD of the same logical project. This is a nightmare for controlling releases to PROD and in fact we have a corrupt repository as a result I suspect. I plan to split the repository into 3 separate databases so that we have a design repos for DEV/UAT and PROD. Controlling code migrations between these I plan to use the metadata export and subsequent import into UAT and then PROD once tested. I have used this successfully before on a project but am worried about inherent bugs with metadata export/imports (been bitten before with Oracle Portal). So can anyone advise what pitfalls there may be with this approach, and in particular if anyone has experienced loss of metadata between export and import. We have a complex warehouse with hundreds of mappings, process flows, sqlldr flatfile loads etc. I have experienced process flow imports that seem to lose their links to the mappings they encapsulate.
Thanks for any comments,
BrandonThis should do the trick for you as it looks for "PARALLEL" therefore it only removes the APPEND PARALLEL Hint and leaves other Hints as is....
#set current location
set path "C:/TMP"
# Project parameters
set root "/MY_PROJECT"
set one_Module "MY_MODULE"
set object "MAPPINGS"
set path "C:/TMP
# OMBPLUS and tcl related parameters
set action "remove_parallel"
set datetime [clock format [clock seconds] -format %Y%m%d_%H%M%S]
set timestamp [clock format [clock seconds] -format %Y%m%d-%H:%M:%S]
set ext ".log"
set sep "_"
set ombplus "OMBplus"
set omblogname $path/$one_Module$sep$object$sep$datetime$sep$ombplus$ext
set OMBLOG $omblogname
set logname $path/$one_Module$sep$object$sep$datetime$ext
set log_file [open $logname w]
set word "PARALLEL"
set i 0
#Connect to OWB Repository
OMBCONNECT .... your connect tring
#Ignores errors that occur in any command that is part of a script and moves to the next command in the script.
set OMBCONTINUE_ON_ERROR ON
OMBCC "'$root/$one_Module'";
#Searching Mappings for Parallel in source View operators
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Searching for Loading/Extraction Operators set at Parallel";
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Searching for Loading/Extraction Operators set at Parallel";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
foreach mapName [OMBLIST MAPPINGS] {
foreach opName [OMBRETRIEVE MAPPING '$mapName' GET TABLE OPERATORS] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT)] {
if { [ regexp $word $prop1] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET DIMENSION OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET CUBE OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET VIEW OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
if { $i == 0 } {
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Not found any Loading/Extraction Operators set at Parallel";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Not found any Loading/Extraction Operators set at Parallel";
} else {
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Fixed $i Loading/Extraction Operators set at Parallel";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Fixed $i Loading/Extraction Operators set at Parallel";
close $log_file;
Enjoy!
Michel -
View and Edit properties pages are not woriking after export and import in sharepoint2013
Hi,
After performing Export and Import in SharePoint 2013 for a subsite, metadata is missing in document library. 404 error triggers on clicking both View-properties of an item and /Forms/DisplayDocument.aspx.
Please help me in this.
Regards,
GurudattaWhile uploading, after browsing the document clicking on OK button giving below error.
Nothing is generated in Event logs. Below are sharepoint logs.
07/16/2014 17:32:08.44 w3wp.exe (0x5234) 0x499C SharePoint Foundation
Logging Correlation Data xmnv Medium Name=Request (GET:http://siteurl/frmFile4/Forms/CreateDocument.aspx?Mode=Upload&CheckInComment=&ID=963&RootFolder=/QAPortal/PackingMaterial/frmFile4&Source=http://siteurl/frmFile4/Forms/AllItems.aspx?InitialTabId=Ribbon%252EDocument&VisibilityContext=WSSTabPersistence&RootFolder=%252FQAPortal%252FPackingMaterial%252FfrmFile4&IsDlg=1) 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.44 w3wp.exe (0x5234) 0x499C SharePoint Foundation
Request Management adc7u Medium Mapping URI from 'http://siteurl/frmFile4/Forms/CreateDocument.aspx?Mode=Upload&CheckInComment=&ID=963&RootFolder=%2FQAPortal%2FPackingMaterial%2FfrmFile4&Source=http%3A%2F%2Fuslsp13%3A1111%2FQAPortal%2FPackingMaterial%2FfrmFile4%2FForms%2FAllItems%2Easpx%3FInitialTabId%3DRibbon%252EDocument%26VisibilityContext%3DWSSTabPersistence%26RootFolder%3D%252FQAPortal%252FPackingMaterial%252FfrmFile4&IsDlg=1'
to 'http://siteurl/frmFile4/Forms/CreateDocument.aspx?Mode=Upload&CheckInComment=&ID=963&RootFolder=%2FQAPortal%2FPackingMaterial%2FfrmFile4&Source=http%3A%2F%2Fuslsp13%3A1111%2FQAPortal%2FPackingMaterial%2FfrmFile4%2FForms%2FAllItems%2Easpx%3FInitialTabId%3DRibbon%252EDocument%26VisibilityContext%3DWSSTabPersistence%26RootFolder%3D%2... 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.44* w3wp.exe (0x5234) 0x499C SharePoint Foundation
Request Management adc7u Medium ...52FQAPortal%252FPackingMaterial%252FfrmFile4&IsDlg=1' 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.44 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Monitoring nasq Medium Entering monitored scope (Request (GET:http://siteurl/frmFile4/Forms/CreateDocument.aspx?Mode=Upload&CheckInComment=&ID=963&RootFolder=%2FQAPortal%2FPackingMaterial%2FfrmFile4&Source=http%3A%2F%2Fuslsp13%3A1111%2FQAPortal%2FPackingMaterial%2FfrmFile4%2FForms%2FAllItems%2Easpx%3FInitialTabId%3DRibbon%252EDocument%26VisibilityContext%3DWSSTabPersistence%26RootFolder%3D%252FQAPortal%252FPackingMaterial%252FfrmFile4&IsDlg=1)).
Parent No
07/16/2014 17:32:08.44 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Logging Correlation Data xmnv Medium Name=Request (GET:http://siteurl/frmFile4/Forms/CreateDocument.aspx?Mode=Upload&CheckInComment=&ID=963&RootFolder=%2FQAPortal%2FPackingMaterial%2FfrmFile4&Source=http%3A%2F%2Fuslsp13%3A1111%2FQAPortal%2FPackingMaterial%2FfrmFile4%2FForms%2FAllItems%2Easpx%3FInitialTabId%3DRibbon%252EDocument%26VisibilityContext%3DWSSTabPersistence%26RootFolder%3D%252FQAPortal%252FPackingMaterial%252FfrmFile4&IsDlg=1) 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.46 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|usl\hclspp, ClaimsCount=23 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Information Rights Management 5202 Information Information Rights Management (IRM): Requesting user email address is empty. 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ak8dj High UserAgent not available, file operations may not be optimized.
at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean disposeIlb) at Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo&
fileInfo, SqlSession session, PrefetchResult prefetchResult) at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid databaseId, SqlSession session, SPFileStreamManager spfstm,
Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd, Object ospFileStmMgr, SPDocumentBindRequest&
dbreq, SPDocumentBindResults& dbres... 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50* w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ak8dj High ...) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String
bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object&
pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel,
UInt64& ppermMask, ... 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50* w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ak8dj High ...Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies,
Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte
bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument,
Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object&
pvarMultipleMeetingDoclibRootFolders, String& pbst... 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50* w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ak8dj High ...rRedirectUrl, Boolean& pbObjectIsList, Guid&
pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies,
String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String
bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean&
pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,... 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50* w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ak8dj High ... String& pbstrTimeLastModified, String& pbstrContent,
UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied,
Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)
at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage,
String& siteRoot, Guid& siteId, Int64& bytes, ... 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50* w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ak8dj High ...Guid& docId, UInt32& docVersion, String&
timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders, String& redirectUrl, Boolean&
ObjectIsList, Guid& listId) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String path, Boolean impersonate, Boolean&
isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String& siteUrl, Guid& siteId, Object&
buildDependencySetData, SPWebPartCollectionInitialState& initialState, ... 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50* w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ak8dj High ...String& siteRoot, String& redirectUrl, Object&
oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64& bytes) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetFileForRequest(HttpContext context, SPWeb web, Boolean exclusion, String
virtualPath) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.InitContextWeb(HttpContext context, SPWeb web) at Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IEx... 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50* w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ak8dj High ...ecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback
cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr
nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompl... 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50* w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ak8dj High ...etion(IntPtr pHandler, RequestNotificationStatus&
notificationStatus) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr
rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.50 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files aiv4w Medium Spent 0 ms to bind 13297 byte file stream 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.52 mssearch.exe (0x1B6C) 0x3F24 SharePoint Server Search Crawler:Content
Plugin ajjig Medium CSSFeeder::ReportPingSession: the session 86ba63af-ce5a-4c7c-a836-c70ee9961b91 has been pinged by PollCallbacks
07/16/2014 17:32:08.52 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Information Rights Management ai4ko Medium Information Rights Management (IRM): The IRM status of the document [] is: untried (-1), the return values is: 0x0. 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.52 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Files ahjkm Medium Spent 0 ms to send 13297 byte file stream 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.52 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Logging Correlation Data xmnv Medium Site=/ 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.52 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Monitoring b4ly High Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=66.9455 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.57 w3wp.exe (0x2CE0) 0x45CC SharePoint Server
Logging Correlation Data xmnv Medium Name=Task: SessionManager.PerformOngoingRequestDepartures 6b6b4445-2b72-0002-9138-988147c881a0
07/16/2014 17:32:08.58 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
General g3ql High [Forced due to logging gap, cached @ 07/16/2014 17:32:08.55, Original
Level: Verbose] GetUriScheme(/QAPortal/PackingMaterial/frmFile4) 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.58 w3wp.exe (0x5234) 0x1E7C SharePoint Foundation
Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process
identity 9e13a59c-dffb-b08d-acd9-c283e837f4a5
07/16/2014 17:32:08.64 OWSTIMER.EXE (0x1ED4) 0x5B18 SharePoint Foundation Monitoring
nasq Medium Entering monitored scope -
How to export and import reports and presentations?
Hi Guys,
how to export and import reports and presentations from Analyzer 7.2 to Web Analysis 11.1.1.
Can you plz tell me the procedure.
ThanksHi,
Like I mentioned earlier, you can export documents and presentations to local computers and/or mapped drives.
- Exported documents take ARD extension & presentations take APT extension.
To export the current document, select File, then Export, then Current Document. In the Save dialog box, indicate your local drive/network location to which the file is to be saved and click OK.
I believe- Analyzer 7.2 also has the wizard to let you Export docs. & Presentations.
- Natesh -
Question regarding export and import of Hyperion Security during upgrade
Hi Guys,
We are upgrading Essbase, Integration Services from 7x to 9x which are utilizing Hyperion Hub and we are going to follow the method of uninstalling 7x and reinstalling 9x components.
Now my question is, what is the best way of transferring security from 7x to 9x. I heard that Advanced Security Manager can be used to export and import back security. Or is there any
other way of doing it??
Can someone please enlighten me on this.
Thanks in advance
KIhatelightroom wrote:
First let me say that any software that comes without a save button should be sold with a warning label.
Why?
Question 1: I have having an issue comprehending how to save a photo. In my case I select the photo, zoom in on the subject, export it to my desktop. The pciture on my desktop does not incorporate the change. Am I missing a step? What do I need to do to export it with this change? I actually watched a You Tube video on this and could not see what i was not doing.
You must have selected the wrong option in the Export dialog box. Under "File Settings", you need to select JPG and not "Original". Of course, you probably need to do some additional viewing of videos (or some reading) to learn that most people's workflow does not automatically include a "Save" or "Export" after editing the photo. It's not a necessary part of Lightroom's workflow, unless you need the photo for some non-Lightroom activity.
Question 2: I just installed Lightroom and am trying to import my 12k strong photo collection. The Import button pulls in about 2k and then cannot find anymore. The photos are stored in folders by date within a master folder. I am selecting the master folder. I can go in and import the sub-fodler individually. However i do not want to do that 200 times.There is no apparent way to go into the subfolder level and select more than one folder.
In the Import dialog box, on the left, under "Source", there is a checkbox that says "Include SubFolders". Make sure this is checked.
Seriously, you need to spend some time reading introductory material about LR because Lightroom does not work like any other photographic software you might have used in the past. You are handling it as if it was no different than standard photo editing software, and you are going to be frustrated if that is your mindset. See the videos at adobe.tv and read this: http://www.flickr.com/groups/adobe_lightroom/discuss/72157603590978170/ -
I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. my goal is to store them in an external hard drive so it doesn't use up memory on the mac hard drive. is it possible to copy the specific projects without copying the entire library? what is the easiest way to do this? i have tried export and import but it didn't seem to work.
What do you not understand?
You can duplicate the iPhoto library (command - D ) and delete everything except the project and its photos from the copy and move that
Or
However the calendar takes very little space - it is simpy database entries - it is the photos in the calendar that take space - and for most people you would wnat to keep those photos in your library
you can use a photo in 50 calendars and it still is only one photo in your library - as I explained calenders do not exist as such - they are simply database entries telling iPhotop how to display the calendar - they take almost no space at all
LN -
SQL Developer 2.1: Problem exporting and importing unit tests
Hi,
I have created several unit tests on functions that are within packages. I wanted to export these from one unit test repository into another repository on a different database. The export and import work fine, but when running the tests on the imported version, there are lots of ORA-06550 errors. When debugging this, the function name is missing in the call, i.e. it is attempting <SCHEMA>.<PACKAGE> (parameters) instead of <SCHEMA>.<PACKAGE>.<FUNCTION> (parameters).
Looking in the unit test repository itself, it appears that the OBJECT_CALL column in the UT_TEST table is null - if I populate this with the name of the function, then everything works fine. Therefore, this seems to be a bug with export and import, and it is not including this in the XML. The same problem happens whether I export a single unit test or a suite of tests. Can you please confirm whether this is a bug or whether I am doing something wrong?
Thanks,
Pierre.Hi Pierre,
Thanks for pointing this out. Unfortunately, it is a bug on our side and you have found the (ugly) "work-around".
Bug 9236694 - 2.1: OTN: UT_TEST.OBJECT_CALL COLUMN NOT EXPORTED/IMPORTED
Brian Jeffries
SQL Developer Team -
Require help in understanding exporting and importing statistics.
Hi all,
I am bit new to this statistics.
Can anyone please explain me in detail about these commands.
1) exec DBMS_STATS.GATHER_TABLE_STATS (ownname => 'MRP' , tabname => 'MRP_ATP_DETAILS_TEMP', estimate_percent => 100 ,cascade => TRUE);
2) exec DBMS_STATS.CREATE_STAT_TABLE ( ownname => 'MRP', stattab => 'MRP_ATP_3');
3) exec DBMS_STATS.EXPORT_TABLE_STATS ( ownname => 'MRP', stattab => 'MRP_ATP_3', tabname => 'MRP_ATP_DETAILS_TEMP',statid => 'MRP27jan14');
4) exec DBMS_STATS.IMPORT_TABLE_STATS ( ownname => 'MRP', stattab => 'MRP_ATP_3', tabname => 'MRP_ATP_DETAILS_TEMP');
I understand that these commands are used to export and import table statistics.
But please anyone help me in understanding this indetail.
Thanks in advance.
Regards,
Shiva.Shiva,
Please post the details of the application release, database version and OS.
Please see (FAQ: Statistics Gathering Frequently Asked Questions (Doc ID 1501712.1) -- What is the difference between DBMS_STATS and FND_STATS).
For exporting/importing statistics summary of FND_STATS Subprograms can be found in (Doc ID 122371.1)
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_details?c_name=FND_STATS&c_owner=APPS&c_type=PACKAGE&c_detail_type=source
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_details?c_name=FND_STATS&c_owner=APPS&c_type=PACKAGE%20BODY&c_detail_type=source
Thanks,
Hussein -
Language Problem while exporting and importing data
hi,
I have Oracle version 8.1.7.0.0 installed on one server and 9.2.0.1.0 installed on new server.
I'm copying and pasting my version info from SQL*Plus:
SQL*Plus: Release 8.1.7.0.0 - Production on Mon Aug 22 10:46:31 2005
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
SQL>
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Aug 22 12:30:06 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL>
I created new user on my new server from enterprise manager.
Exported user from the old server and imported in the new server.
i.e: from Oracle8i Enterprise Edition Release 8.1.7.0.0, I did
c:\>exp system/manager file=abc.dmp owner=abc
Then on the new server Release 9.2.0.1.0, I did
c:\>imp system/manager file=abc.dmp fromuser=abc touser=abc
I'm using Arabic Language on my both servers. NLS_LANG parameter on both the servers is AMERICAN_AMERICA.WE8MSWIN1252.
On both the servers I'm able to insert and select data in arabic.
However, after I export the data from old server to the new server, the arabic data comes in question marks.
If I create new table and insert arabic data on new server's user abc it is displaying well. Only the data which I exported and imported is not showing arabic.
On both old and new servers operating system is Windows XP.
I'm stuck with this problem. Anybody having any idea about how to solve this problem please help.
Thank you all in advance.
RegardsLet me be clear here. Storing Arabic data in a WE8MSWIN1252 database is not supported by Oracle and will lead to problems. You are incorrectly using the NLS_LANG to prevent proper conversion and your data appears to be okay when you use utilties like SQL*PLUS to view your data. When you write applications that don't rely on the NLS_LANG like JDBC thin driver for instance you will realize your data is in fact invalid. To learn more about the NLS_LANG you can take a look at this FAQ: http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
To migrate your database to a proper character set you can refer to this paper:
http://www.oracle.com/technology/tech/globalization/pdf/mwp.pdf
But please do not ask for help in supporting your current configuration in this forum. -
Exporting and Importing of Schema
The Export and Import of Schema is not working consistently in SP4.
When I create a new repository from the schema, all the subtables get created. The main table is has only one field in it. It reads Category.
The other fields in the main table are missing and are not imported during the Import Schema operation.
Has anyone encountered the same issue?
If so, please let me know how you overcame this errorneous behaviour?Hi Adhappan
I have tried importing without success. The import is not consistent. The same schema creates different sets of tables & fields each time. Sometimes if you reimport some more tables which were not set up the first time gets selected for import.
I did a simple exercise to test the import / export functionality.
1. I unarchived a repository from standard content provided by SAP
2. I exported the schema
3. I tried importing the schema without any modifications to schema
4. The results were highly inconsistent.
Arvind
Pls reward useful answers -
Exporting and importing applications/workspaces
I am currently on a testing workspace and want to put the application/workspace to another workspace. I know the export and import commands but my concern is the application import. The application is linked to a sample table caled "Samp" and now I would need to link it to a table called "test". This table is almost eactly the same as "Samp" witht he exeption of 2 or 3 new columns. I am wondering what I need to do to change the link to the new table and whether the application will still work.
Thanks"419008",
In cases like this, where I know the table name is going to be different across HTML DB instances, what I usually do is create a view on top of the table, and then build my HTML DB applications against the view. Then, assuming the definition of the tables are the same, it should work without further modification.
So in your testing workspace you could have:
create view foo as select * from Samp
and in your other workspace you could have:
create view foo as select * from test
Joel -
Exporting and Importing Destination Controls Error
When I export table within destination control and import the table to another Ironport again within destination control I receive error - "Wrong format of the destination config file: ip_sort_pref is required for the global settings."
We are updating the ASYNC on each of our de clustered Ironport. So when one is not in use we need the other to handle all the traffic, including domain controls.
The output displays
[ABCDE.com]
max_host_concurrency = 500
limit_apply = system
limit_type = host
max_messages_per_connection = 50 ......
How can I import this without losing or altering the data within.
^^^^^^^^^^^^^^^^^^^^^^
Solution
We upgrade one of our SMTP ASYNC to 8.0.1 which creates a additional line within default of the upgraded Ironport exported control destination table that is named... wait for it.... ip_sort_pref. Just add it.The applications and drivers have been imported into the Dev SCCM server however I cannot find the actual content so I am not sure this has worked properly.
When you exported did you choose to "Export all content for selected task sequence and dependencies".
80070003 = The system cannot find the path specified.
See here for exporting and importing task sequences
http://blogs.technet.com/b/inside_osd/archive/2012/01/19/configuration-manager-2012-task-sequence-export-and-import.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
Exporting and importing table using R3trans program between 2 clients
Hi,
How to export and import a table between to clients in a same system using R3trans program?
I need to copy a table from Client 020 in a system to client 040 of the same system using R3 trans. I need to know the procedure.
Can any one advice
Regards,
SureshThis is how you do a export and import of table entries.
Export:
Open Notepad and type the following,
export
client = 020
file = 'clone.export.<sid>.<client no>.data'
select * from <client_dependent_tablename1>
select * from <client_dependent_tablename2>
select * from <client_dependent_tablenamen>
Save the file as export.ctl
Run R3trans export.ctl
and the data of these files will be stored in a file called clone.export.<sid>.data in the directory from which you have called R3trans
Import:
Open Notepad,
import
client = 040
file = clone.export.<sid>.<client no>.data
buffersync = yes
Save the file as import.ctl
Run R3trans import.ctl
Cheers!
Bidwan
Message was edited by:
Bidwan Baruah -
Exporting and importing just table definitions
Hi,
I have this production database that has a huge amount of data in it. I was asked to set up a test database based on the exact same schema as the live database. When I tried to do an export (from live) and import (to test), with the parameters rows=N and compress=y, the target (test database) data file will still grow enormously, presumably because of the huge number of extents already allocated to the table in the live database. My test database of course, has a limited hard-disk space.
Is there a way to export and import the table definitions without having the target database experiencing a huge growth in the size of the tablespace?
Thanks,
Chris.If an export with compress=n is still creating initial extents that a too large, you can still build with the import file but it will take a little work.
run imp with indexfile=somefile.sql
when imp is finished, edit somefile.sql by:
1. remove all the REM statements.
2. remove all the storage clauses (tables and indexes)
Make sure your tablespaces have a small (say 1k) default initial extent.
run imp again with rows=n
All your tables and indexes will be created with the default tablespace initial extent. -
How to export and import dependent tables from 2 different schema
I have a setup where schema1 has table 1 and schema 2 has table2. And table 1 from schema1 depends upon table 2 from schema 2.
I would like to export and import these tables only and not any other tables from these 2 schemas with all information like grants,constraints.
Also will there be same method for Oracle 10g R1,R2 and Oracle 11G.
http://download.oracle.com/docs/cd/B12037_01/server.101/b10825/dp_export.htm#i1007514
Looking at this For table mode it says
Also, as in schema exports, cross-schema references are not exported
Not sure what this means.
As I am interested in only 2 tables I think I need to use table mode. But if I try to run export with both tables names, it says table mode support only one schema at a time. Not sure then How would the constraints would get exported in that case.
-Rohitworked for my 1st time I tried
exp file=table2.dmp tables="dbadmin.temp1,scott.emp"
Export: Release 10.2.0.1.0 - Production on Mon Mar 1 16:32:07 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: / as sysdba
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P1 character set (possible charset conversion)
About to export specified tables via Conventional Path ...
Current user changed to DBADMIN
. . exporting table TEMP1 10 rows exported
EXP-00091: Exporting questionable statistics.
Current user changed to SCOTT
. . exporting table EMP 14 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.
Maybe you are looking for
-
How do I download music from my PC to the I phone 5
I find nothing in the tutorials or user manuel for downloading from your PC to the Iphone5. All it talks about is BUYING from ITunes.
-
My wife received a new iPad Mini for Christmas-- when connected to iMac, icon appears in iPhoto sidebar; however, there appears to be no option to "unmount." Also, unlike my iPhone 4S whose icon appears in iTunes sidebar, the Mini does not. Any insig
-
Is there a delay due to holidays?
I forwarded my mac.com published site to a personal domain name I purchased (through go daddy) and was given the usual "it takes 48 hours to process", but that was on 12/24. It is now 12/27. Does the Christmas holiday affect the 48 hours? I have done
-
Qosmio F10 - Bluetooth doesn`t work
Can't get my Bluetooth to work - machine came with it already loaded. My palm found it once but hangs when I try to transfer data. Now can't find it. Get an error message when I try to alter preferences to my notebook is discoverable and won't save t
-
Problems with the Password File Authentication
Hi, I try to implement the Password File Authentication in my PC (Window XP). I did : a) orapwd file:=C:\oracle\ora92\dbs\orapw.pwd password=sys2003 entries=5 b) I set the REMOTE_LOGIN_PASSWORDFILE to EXCLUSIVE c) I created a user "willer" (With SYST