Export and import the internal table

Hi,
Could you explain the total internal table data how we export and import please give me example.
Thanks,
Hari

Hi,
Check this thread..
exporting internal table to memory variable

Similar Messages

Reg. Particulare table export and import the same table

Dear Sir
I am MM consultant, I would like to export only one table and import the same after some request released,how to do this. Please help me.
I am working in Oracle 10.2.0.2.0 release
Thanks in advance
Rajakumar.K

Hello Raja,
you want to export some table, perform some changes on the system (releasing a transport) and then reimport the old state of the table? This sounds like a very bad idea. You are inviting desaster and compromise the consistency of your system.
Go to http://help.sap.com chose your release and enter the search term brspace to find out
supported ways to reorganize a table.
Regards,
Mark

How row migration get eliminated by export and import the table.

Hi ,
Please let me know,how row migration get eliminated by export and import the table.
Another method,deleting migrated rows and inserting those rows from copied table,
i think the concept behind this method is,inserting these rows into new block.
pls correct me if i am wrong.
Thanks,
Kumar.

Hi!
You can also use ALTER TABLE MOVE command, or if you are on 9i you can use DBMS_REDEFINITION package.
If you have a maintainance window the easiest way would be to use alter table move.
Regards,
PP

Is it possible to export and import the roles and users tables?

Hi,
is there any possibility to export and import the role and user definitions?
We have a SAP MDM repository with a lot of roles and users and also with a lot of changes.
And now I'm searching for a fast and efficient way of managing the roles and users.
Thanks and Regards, Melanie

Hi Melanie,
There is no export/import functionality for roles and users. The only way to manage these in an automated way would be to write a program that uses the Java or ABAP APIs. Both APIs expose functionality to create, update and delete roles and users.
Hope this helps,
Richard

How to import the internal table into subroutine as parameter

how to import the internal table into subroutine as parameter, and its structure can be recognized inside the subroutine

Hi Yong,
try this:
parameters: p_tabnm like dd03l-tabname.
field-symbols: <fs_tabname> type standard table.
data: itab_ref type ref to data.
create data itab_ref type standard table of (p_tabnm)
                     with default key.
assign itab_ref->* to <fs_tabname>.
select * from (p_tabnm) into table <fs_tabname>.
perform subroutine tables <fs_tabname>
                   using p_tabnm.
*&      Form subroutine
      text
     -->P_<FS_TABNAME> text
     -->P_P_TABNM text
form subroutine tables   p_tabname type standard table
                 using    p_tabnm.
Here p_tabname already has the structure of the table you gave as input
parameter
endform.                    " subroutine

How to export and import the lsmw

Hi Friends,
How to export and import the objects in lsmw
from dev to qas(quality) systems........
its urgent.........
regards,
venu.

best way is to create a transport and move it to other enviroments
There are two ways of Transporting for this. Can choose any one.
Goto the LSMW Transaction
1)Extras>Export Projects>(Give the Project name)
In next screen(Choose what subproject, routines, etc.. you wan to copy then, Export Rules-->Export((Will prompt for file name)
A text file will be downloaded.
In the Target System
Goto LSMW Extras-->Import Projects and give the text file which was downloaded.
2)Extras-->Generate Change Request
Assign a change request which is basically a transport request and you can then get this transported from one system to another through the basis route.

How to export internal table and pass the internal table to another screen?

Hi,
I have a sql SELECT statement that select data from table into internal table. I would like to export out the internal table and pass to another screen and display the data in ALV list. How to export it out? I try but the error given was " The type of "OUT_SELECT_ITAB" cannot be converted to the type of "itab_result".
Another question is, how to pass the internal table that i export out from the function module to another screen?
Here is the code
==============================================================
FUNCTION ZNEW_SELECT_ZSTUD00.
""Local Interface:
*" IMPORTING
*"     REFERENCE(IN_SELECT_YEAR) TYPE ZSTUD00-EYEAR
*" EXPORTING
*"     REFERENCE(OUT_RESULT) TYPE CHAR9
*"     REFERENCE(OUT_SELECT_ITAB) TYPE ZSTUD00
*& Global Declarations
DATA: itab TYPE ZSTUD00,
      itab_result TYPE TABLE OF ZSTUD00.
*& Processing Blocks called by the Runtime Environment
itab-eyear = IN_SELECT_YEAR.
SELECT *
FROM ZSTUD00
INTO TABLE itab_result
WHERE eyear = IN_SELECT_YEAR.
IF sy-subrc = 0.
out_result = 'Success'.
OUT_SELECT_ITAB = itab_result.
ELSE.
out_result = 'Fail'.
ENDIF.
ENDFUNCTION.
===============================================================
Please advise. Thanks
Regards,
Rayden

Hi Nagaraj,
I try to change it in Tables tab page but it state that TABLES parameters are obsolete. when i "Enter". I try to "Enter" again. it seem to be ok but it stil give me the same error.
================================================================
FUNCTION ZNEW_SELECT_ZSTUD00.
""Local Interface:
*" IMPORTING
*"     REFERENCE(IN_SELECT_YEAR) TYPE ZSTUD00-EYEAR
*" EXPORTING
*"     REFERENCE(OUT_RESULT) TYPE CHAR9
*" TABLES
*"      OUT_SELECT_ITAB STRUCTURE ZSTUD00
*& Global Declarations
DATA: itab TYPE ZSTUD00,
      itab_result TYPE TABLE OF ZSTUD00.
*& Processing Blocks called by the Runtime Environment
itab-eyear = IN_SELECT_YEAR.
SELECT *
FROM ZSTUD00
INTO TABLE itab_result
WHERE eyear = IN_SELECT_YEAR.
IF sy-subrc = 0.
out_result = 'Success'.
OUT_SELECT_ITAB = itab_result.
ELSE.
out_result = 'Fail'.
ENDIF.
ENDFUNCTION.
===============================================================
regards,
Rayden

To export and import oracle 11g table data only

Hi Gurus,
Just not sure of the procedure to follow in the export just the table data and then truncate the table do some changes(not table structure changes ) and then import the same table data in to the relevent table .
Could some please help me in the setps involved in it .
Thanks a Lot in advance

If you can use Data Pump, here are your commands:
expdp table_owner/password directory=<your_directory> dumpfile=table_name.dmp tables=table_name content=data_only
impdp table_owner/password directory=<your_directory> dumpfile=table_name.dmp tables=table_name table_exists_action=append
Data Pump requires version 10.1 or later.
Dean

Export and import of an table data

Hi All,
I have a situation where i need to append/import the production table ( X ) data to test table ( X ) which has some data already in it and should not be lost during the operation. The record count is around 6 million .
Any expert suggestion or tips with export and import command is highly appriciable.
Thanks in advance .

if you are using
IMPDP --- use table_exist_action=append
IMP -- ignore=y
Lets say
impdp username/pwd directory=<directory_name> dumpfile=<dumpfile_name> tables=X table_exist_action=APPEND.
This will append the data to existing table

How to export and import the source code

Hi,
I want to ensure the dev databse and prod databse same
I dont mind about the data.
I want all the objects ( packages,procedures,functions ) to be exported and imported.
Please help me out in this
Regards,
Ravi

I wrote a long message but lost everything while trying to post :(
You haven't mentioned about tables. If there are some changes in the tables structure, you need to take care of that also as in the new database if you don't change the tables all the dependent procedures...functions...packages would go invalid.
Amardeep Sidhu
http://www.amardeepsidhu.com

How to export and import the Portal Components

Hi,
I had developed few components like (Forms, Reports, Frames etc.,) in Oracle Portal release 2. Now, I need to make available all the components on my Client's machine. I like to know how to export and import these components.
If any can help in this, it will be a great help for me...
Thanks in Advance...

The migration of any Portal DB provider components, has the following steps.
Assume that you are migrating a form component form_X.
1) Click the export link of the form_x.
(this will take you to create transport screen).
2) Specify a name of the transport set which you are going to create. (eg., "My form_X transportset")
(Since the objects are migrated using a container which is in other words called as 'Transport Set').
3) In that select the export now button.
(this will mark your form component form_X for export).
4) Verify that the status of the transport is 'Extract Complete'
(check with the browse transport screen in Export/Import Portlet under Admin tab).
5) Now, the object information is extracted into transport set tables used by Portal Export/Import Utility.
6) Go to that particular transport set, (browse transport) and download the script available.
7) That script will lead you to various steps,
(create a dump ).
8) In the target instance, import that dump using the same script again.
9) Merge the contents of the dump (form_X information) into any of the application.
(Import option => in the export/import portlet under admin tab).
10) Verify that the status of the transport set is 'Merge Complete'.
Now, the object is migrated and ready for use.
(Here are explaining the export/import process in detail.
You can refer the export/import manuals.
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/INTERNALPRODDEVFOLDER/TECHREADINESS/CM_PUBLISHING/EXPIMP/EXPORT_IMPORT_LOB0.PPT

Export and import the windows phone contacts as .vcf file to the application

Hi, I need to export the windows phone contacts as .vcf file and import it to my windows phone application. I'm unable to import the full details of a contact. Is there any sample code to export and import phone contacts programmatically. Please
help if there is any solution. Thanks.
Nikitha

Found this on the internet:
http://www.lumisoft.ee/lswww/download/downloads/Net/
If you download the Lumisoft.Net.Zip and extract it looks like there is a vCard folder with some classes that may help you.
You will need to use something like that or search a bit more and find a vCard C# Helper library.
Bret Bentzinger (MSFT) @awehellyeah

How to Export and Import the schemas

How can i export & import the schema's ? pls give me some example on how to do it.
Could anyone pls show the commands to retrieve the Tablespace information... i mean what its initial size.. and how much of space has been used...
ur reply is very much appreciated
regards
Muraly

user11136977 wrote:
Hi all,
i am trying to export / import, need to know the commands
=>how to export and import full schemas from 1 user to another
=>how to export and import database
=>how to export the tablespaces
RegardsNo version, must be 10g then.
All you asked and much more in the Utilities guide.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#i1023560
HTH
Aman....

How to export Tabel? (Exporting and Importing of RFCDES table)

Hi,
We are doing system Refresh on qualitysystem,
I want to export the Tables and reimport them after system refresh
Tables like: RFCDES
How can export this table ?
How to import the table?
It is very urgent, Please give me the solution as soon as possible
Note: we are using BRTOOLS
Points awarded
Regards,
Ravi

Hi Ravi,
Create a control file like "rfcdes_export.ctl"
export
file '/usr/sap/data/export_rfc.dat
delete from rfcdes
select * from rfcdes
Take the export :
R3trans -w rfcdes_export.log rfcdes_export.ctl
Create the control file "rfc_import.ctl"
import
file '/usr/sap/data/export_rfc.dat'
Import it:
R3trans -w rfc_import.log -u 1268 rfc_import.ctl
Hope it will help you.
Best Wishes.
Kumar

Exporting and Importing the schema with AQ capability

Hi,
We have a production DB which is using Advance queuing and this whole queuing is working fine in Prod but now we have a problem in test Env and it seems that somebody has already tampered the test DB. (the queue reads and sends the messages to DB2)
So i wanted to export the prod schema and import it to the test schema that we have.
i wanted to make sure that if i import it to test db , it doesn't send the messages to the prod DB2 database!!
now it should send the messages to the test DB2 database.
How can i see where it sends the messages after i imported it ? how can i change it?
i'm not sure if i have explained my problem in a correct way and if you have understood my question. Please send me messages and i can explain more about it.

Hi Adhappan
I have tried importing without success. The import is not consistent. The same schema creates different sets of tables & fields each time. Sometimes if you reimport some more tables which were not set up the first time gets selected for import.
I did a simple exercise to test the import / export functionality.
1. I unarchived a repository from standard content provided by SAP
2. I exported the schema
3. I tried importing the schema without any modifications to schema
4. The results were highly inconsistent.
Arvind
Pls reward useful answers

Export and import the internal table

Similar Messages

Maybe you are looking for