Export and Import User Command Line

Hi,
I would like to export a user on my Xserver via command line. I know it's the nidump command but not sure how to use it for a proper export. After the export I want to import that user on a second macosx server with niload or whatever command is needed.
Please can somebody post some examples for me.
Thanks heaps,
Christian

I would like to export a user on my Xserver via
command line. I know it's the nidump command but not
sure how to use it for a proper export. After the
export I want to import that user on a second macosx
server with niload or whatever command is needed.
To export all users on the old server:
sudo nidump passwd . > myExportFile
Then open the file with TextEdit (or the like) and clear out all the users you do not want to import. Then copy the file to your new server and do:
sudo niload passwd . < myExportFile
Note: this only works with local NetInfo users, not LDAP ones.<br>
MacBook Pro   Mac OS X (10.4.6)  

Similar Messages

  • Export and import user master records

    Hi,
    We are planning for system refresh activity. So I am planning Production server data to copy in Quality server. I want retain Quality server users like that only.  Is there any way I can export user master records and import it later?
    Please advice us.
    Our environment is 4.6 C, Oracle 10g, windows 2003 server.
    Regards
    Satya

    Hello Satyanarayana,
    please be aware, that with SAP_USER standard change logs are not copied. So if you have such in your QAS, they will be propably overwritten by the PRD content. You will loose then change logs for role changes, which are kept in the standard change documents (cdpos,cdhdr).
    User change docs are copied together with the users with provfile SAP_USER.
    That is just for your information. In general there will not be change documents for roles in QAS.....
    b.rgds, Bernhard

  • EXPORT AND IMPORT MEMORY COMMAND

    Hi Experts,
      I AM FACING PROBLEM TO EXPORT VALUES FROM INTERNAL TABLE OF ONE TRANSACTION TO ANOTHER TRANSACTION AND IMPORT  THOSE INTERNAL TABLE DATA. HOW TO RESOLVE THE ISSUE.
    THANKS
    BalaNarasimman.

    Hi,
    Here are the documents which you can use for the syntax
    Export
    [http://www.s001.org/ABAP-Hlp/abapexport_data_cluster.htm]
    Import:-
    [http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/import01.htm]

  • Export and Import Users in UCM

    Hi,
    Does anyone know how to move all users, alias and role definitions from one ucm to another ucm?
    Thanks.

    Hi,
    If you don't have user accounts defined in LDAP, you can try to use Archiver tool for copying local users.
    Although Archiver was not created for this purpose, it has an option "Export user configuration information". I used it once in on my test system and it worked, but it was not the case of migrating data but restoring previous state of the system (this shouldn't be problem as the Archiver export bundles can be imported on another UCMs). I created export definition that exports no content, just users.
    Try this, but test it twice or more before using on production system.
    Good luck!
    Jakub

  • Export and import user presets

    How to import metadata user presets from another Lightroom catalog?

    Metadata presets are stored in folder inside of your user settings. Depending upon your operating system, this location may vary.
    http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-4.html
    It is as simple as copying them.

  • Export and Import of Portal Users (UME database only)

    Hi
    What is the most efficient way to export all Portal user that are stored in Portal UME database so that it can be imported to another Portal installation and be used..
    Thanks in Advance
    Ananda

    Hi,
    SAP User Administration is the standard way to export and import users in the portal. Using the export functionality, all the user information will get exported, including the roles and groups assigned:
    [User]
    uid=userid
    last_name=Lastname
    first_name=Tobias
    language=en
    accessibility=0
    role=pcd:portal_content/com.sap.portal.xxx;
    group=Administrators;
    If you only want to export the user data without the roles and groups, you'll have to delete these lines.
    SAP Help: http://help.sap.com/saphelp_nw04/helpdata/en/70/9be23d44d48e5be10000000a114084/frameset.htm
    Export Format: http://help.sap.com/saphelp_nw04/helpdata/en/ae/7cdf3dffadd95ee10000000a114084/frameset.htm
    SDN Article: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f02e3e37-5ee3-2910-129d-967aef3fa386
    br,
    Tobias

  • Scripting Oracle export and import dumps

    Hello,
    I would like to know if it is possible to script oracle export and import dump commands in a PL/SQL package rather than at command prompt. Also, how can i copy the export dump files across the network to a specific location.
    I would really appreciate if someone can provide me with examples????
    Thanks.

    Yes, there's DBMS_JOB on 9i, it's sort of DBMS_SCHEDULER's 'grampa' ;)
    Check the 9i docs (http://tahiti.oracle.com) and do some searches here and on http://asktom.oracle.com for more info.
    Hoewever, in order to execute OS-commands, you'll probably need a JAVA wrapper.
    DBMS_JOB cannot do that.
    Examples can be found here:
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:952229840241
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:16212348050

  • Scripting oracle export and import dumps through PLSQL stored procedures

    Hello,
    I would like to know if it is possible to script oracle export and import dump commands in a PL/SQL package rather than at command prompt. Also, how can i copy the export dump files across the network to a specific location.
    I would really appreciate if someone can provide me with examples????
    OR
    If there is off the shelf solution for what i am trying to achieve?
    Many Thanks.

    Hello,
    there are many ways to do this:
    - Java with PL/SQL wrapper,
    - call C code as external procedure from PL/SQL,
    - DBMS_SCHEDULER has some features related to this as well,
    - or write your own logic: for example creating a new file with UTL_FILE could be the trigger of the export.
    Franky
    Edited by: Franky on Aug 10, 2009 4:25 AM - extended

  • How to export and import database from command line?

    I am trying to export my old database into new server.
    However, I want to export and import that database from command line.
    Is it possible?
    Thanks.
    SZ

    I used this command
    exp username/password@database full=y
    my export log file is as follwing:
    Connected to: Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
    With the Partitioning and Java options
    PL/SQL Release 8.1.5.0.0 - Production
    EXP-00037: Export views not compatible with database version
    EXP-00000: Export terminated unsuccessfully

  • IDM export and import commands

    Hi,
    I am trying to export and import some of the objects in IDM using command line interface.
    Eg: I have an user Object which needs to be exported in the form of an XML file using command line and make some changes and import the user object xml back to IDM using a command line interface
    I am very new to IDM. Any help regarding this would be useful.
    Thanks,
    Hsotnas
    Edited by: Hsotnas on Sep 18, 2007 7:17 PM

    Actually it can. There are a few ways to achieve this but one is.
    1. List Objects > ListFile
    2. read ListFile to write commands to CommandFile i.e ListFile might contain:
    Configuration SPE
    EndUserForm MyForm
    then this script (perl or whatever) would convert this to the following in CommandFile
    "getObject Configuration SPE > SPE.xml"
    "getObject EndUserForm MyForm > MyForm.xml"
    3. run lh console < CommandFile

  • DHCP Server does not work after Exporting and Importing Using Netsh Command

    Hello Friends :
    I had two dhcp servers in windows server 2003 server , I have upgraded one of them to windows server 2008 32 bit and again i installed a windows server 2008 R2 as an additional Domain Controller , the last scenario was like this :
    srv-1 : windows server 2003 + DHCP = working with no problem
    srv-2 : windows server 2003 + DC + DHCP = Worked without problem
    srv-3 : windows server 2008 R2 + DC = worked without any problems
    I exported the DHCP server configuration on the srv-2 using netsh dhcp server export and Imported them to srv-3 using the
    netsh dhcp server import command , the command completed successfully and i can see all of the scopes without any problems and errors , i have authorized the new server without any problem , all scopes are activated without any problem so i
    disabled the srv-2 DHCP service and unauthorized it from active directory , the problem is that the new server semms that does not lease any address to clients !!!
    1- I have authorized it
    2- I used Rogue Checker tool in client computers they see authorized server without any problems
    3- The same tool in workgroup only shows srv-1 as the DHCP server and does not see other DHCP servers
    4- Bindings are OK and DHCP servers only have one NIC installed on them
    What can i do to make sure my srv-3 DHCP server will work on the network ?
    thanks ...
    MIMO

    Are the clients on another network so you need to configure a DHCP relay agent?
    If you load up perfmon on the dhcp server and remove all counters and then add DHCP counters. Do you see any dhcprequests when you reboot your dhcp clients? This will determine if your server actually receives any dhcp requests.
    Have you check event viewer for any warnings or errors?
    And the classic one restarted the dhcp server service (or reboot)?
    Regards Per-Torben Sørensen http://pertorben.wordpress.com/

  • Export and import change document for user master data

    Dear Gurus,
    I have two queries on change document for user master data:
    1. Are there any approaches to export and import change document for user master data?
    We often do system copy from PRD to QAS for UAT and troubleshooting. Before system copy we export the user master data from QAS and then import after the copy process. We would like to keep the change document for user master data on QAS from being refreshed from PRD for security reason.
    2. Change document for Role change in QAS
    When the role is created or modified in DEV and then transported to QAS, the role change document doen't include this change log. The role change document in QAS only records those role changes directly made in QAS.
    Could you advise this is by SAP design or are there any approaches to record this transported role change  in the role change document in QAS?
    Thanks
    YBY

    1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
    2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
    Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
    Cheers,
    Julius

  • Is it possible to export and import the roles and users tables?

    Hi,
    is there any possibility to export and import the role and user definitions?
    We have a SAP MDM repository with a lot of roles and users and also with a lot of changes.
    And now I'm searching for a fast and efficient way of managing the roles and users.
    Thanks and Regards, Melanie

    Hi Melanie,
    There is no export/import functionality for roles and users.  The only way to manage these in an automated way would be to write a program that uses the Java or ABAP APIs.  Both APIs expose functionality to create, update and delete roles and users.
    Hope this helps,
    Richard

  • Export and Import are not supported on 10g databases for users logged

    Hi
    I having the below written error, when i want to export or import my database. I having Standalone system using windows xp.
    Role Error - Export and Import are not supported on 10g databases for users logged in with the SYSDBA role. Logout and login using a different role before trying again.

    Actually i ma new to EM...
    When I want to Import any thing He is asking abt the HOST CREDENTIALS
    I can't undrstatnd wht he is asking????
    Host Credentials
    * Username          
    * Password          
              Save as Preferred Credential
    It Genrate the below error
    Error - ERROR: Wrong password for user

  • Refresh Report and At Line-Selection and At User-Command

    Hi All
    I have 2 querries
    1) I want to use At Line-selection and At user-command in the same report. But At line-selection is not getting triggered why? When I remove Set pf-status 'xxx' and at user command , then at line selection works . I want to user both at a time.
    2) I am giving user ability to edit the report shown and when he comes back by exiting the editing I want to refresh the report which is shown already to him to give effect of his editing.
    Thanks in anticipation
    pM.

    i just tried, and no problem at all.
    In the <b>Recommended Function Key Settings</b>  for  F2 key add command "PICK"
    Regards
    Raja
    since you are new to the forum, have a look at this weblog.
    /people/mark.finnern/blog/2004/08/10/spread-the-love

Maybe you are looking for

  • BSP to trigger a Process Chain in BW

    Hi ,   I have a requirement to develop a BSP Application in the BW System where the BSP Application have to get some input parameter and in the back ground trigger a process chain. Can any one tell me how to trigger the process chain in BW System fro

  • Problem with Drag & Drop

    Inside dragGestureRecognized(DragGestureEvent e) i have created a image like this Image objIM objIM = createImage(50,50); then i called java.awt.dnd.DragGestureEvent startDrag(Cursor dragCursor, Image dragImage, Point imageOffset, Transferable transf

  • Setup for Oracle Public YUM server

    Dear all, What should I put in the yum.conf if I want to user Oracle Public YUM server? I have add below, is it ok? [Oracle_public] name=Oracle Linux Public baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL5/7/base/i386/ enabled=1 gpgcheck=0

  • Flash 'page flip' into Dreamweaver

    I have a site sheffield-central.com, from client input indicates that I can make great use of these (page-flip.com). I have included a couple of examples in the past with no problems. However, I had a computer built around 6 moths ago and it seems to

  • Recuperar la información en mi Ipod Touch

    Hola, como puedo recuperar la información de mi Ipod touch. Intentaba realizar la actualización por Itunes y me borro absolutamente todo. No se como recuperar el archivo de respaldo. He intentado de todo por Itunes. Lo peor, perdí el CD para estos ca