Export and then re-import source files from InfoPath 2010

Hi all,
While looking in to my form being oddly large I exported all the source files and noticed that there was a large image file in there (which wasn't on any of the views, so I don't know how it was there). I need to delete this file, then re-import all the
files to become an InfoPath form again. Can someone please tell me how I do that? I don't seem to be able to find anything in the menus....
Thanks!
Alex

Hello Alex,
I don't think you can import modified infopath form to become a new form. Event you export forma nd delete any file or image then also you will get error when open the menifest.xsf file.
Better you try to find image in form and delete image from form itself. Just check all the views, form controls (specially hyperlink), to remove that image.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Similar Messages

Trouble importing .pst file from outlook 2010 to office for mac 2011

Hi !!.. have a probem.. maybe u could help I would be so grateful...
At work I am using windows 7 microsoft office 2010 fully updated,,
I export a folder of my sent e mails to the desktop,, then copy to flash drive...
I take the flashdrive and put it in my mac..copy pst (and subfolders) to mac desktop..
then I open office for mac 2011(fully updated) and import the .pst file from the desk top..
all folders show up and open but not e-mail content!!
how can I get my e mails from work to my mac.. why am I not seeing the e-mails..the file that copies over is around 33 mb ( 188 emails) so I know there is something there..I am only importing my e-mails.. no other info) I even create a sub folder and move
everything to the subfolder before I copy it..
can you help me??
thansk so much !!

Hi there,
Can you import the PST file and find the sent items in another Outlook for Windows? If the issue only occurs in Outlook for MAC, I'd suggest you pose the question in the forums below:
Office for MAC
http://www.microsoft.com/mac/support
Support for Microsoft Office for Mac 2011 and 2008
http://support.microsoft.com/gp/cp_macoffice2008_master
How to obtain support for Microsoft Outlook for Mac 2011 connectivity problems with Exchange Server
http://support.microsoft.com/kb/2353366
Your understanding would be appreciated.
Fiona Liao
TechNet Community Support

Cataloging Archive Drives And Can Not Import RAW files from Kodak DCS Pro

Tried with bridge and photoshop and they will not open DCR file
How can I convert this file to a DNG...do I need to go old school and download a older version of camera RAW or go to an old MAC te a os that supports Kodak's DCS host software

There is a separate DNG converter tool from Adobe, whichnyouncan download as freeware.
No idea though if this does support your special raw format.
This is often used to help people with LR3 but newer cameras, which are supported in LR4.x only.
Going for an older camera raw version will not solve anything, since older formats are always readable by newer versions (provided the file is uncorrupted).
Cornelia

How to download Oracle EBS patch to import source file into FDQM

Hello Experts,
I am not able to find patches for importing source file from Oracle EBS into FDQM.Actually I have HFM,FDQM,ESSBASE,Planning,erp,epm,calculationManager in my virtual machine.I didn't Install Oracle EBS
Please tell me how to import source file from Oracle EBS like Flatfile from HFM into FDQM and share me what I need to install regarding EBS to Import and register the EBS adapters.It's urgent please share asap.
Thanks in advance.....

There are not any EBS Adapters for FDM.
If you are just importing a source file from EBS, you would need to setup an import format to parse the source file in FDm and then assign the import format to the location that will be used to load the target system and run the import process.
If you are looking to pull directly from EBS, you would need to use ERP Integrator (ERPi) to connect to oracle EBS and then use the ERPI adpater in FDM to pull the data from ERPI into FDM.
Can you be specific on what you are looking to do?

Import .MTS files from AG-HMC40P panasonic

Hi,
I am new on both final cut X and my new camera Panasonic AG-HMC40P from panasonic. Therefor I have some, perhaps, very basic questions that I hope You can help me with based on problems with import.
And forgive - my english is not the best - i know!
1. Does this camera (what is the "callname" for this camera?) allways shoot in .MTS files?
2. When i want to import the 5 files, and i put in the SD-card in my Imac, the files are found in a folder in Private > AVCHD > BDMV > > STREAM - is this the right place for them to be?
I think the quality was very grey and unclear, but maybe that was my own fault based on cameraskills more than the import.
I then copy the files to the desktop (drag and drop) and opens FC X. When I choose import I can choose between "from Media, Imovie project, imovieEventLibrary or XMnL." It is not poosible for me to choose" Reimport from camera/Archive".
Should I have opened Imovie and copyed the files in there and then choose import from imovie project? would the quality be even worse from this? I guess it would make the files smaller in size and therefore a worse quality?
Could i import the files from the camera instead using a USB cabel, and should i then choose Reimport from camera/archive or? And whay does it say reimport?
There is no log and transfer / capture like i know from fc6...
Or should i choose import from media. When i do, the SD card opens up and i can import the files from there?
Or should i convert it to e.g appleprores maybe using Mpeg streamclip? That is what I was used to (worked on canon60D and fc6 before)
What settings should fc X have when i edit the files?
When i export the film, what settings should it have? H264 ?
Hope someone will help. I know it is a lot, but I am really ,lost. I have looked at some previously posts about this subject but I did not understand theese fully.
Thanks
Lise

1. Yes. The format it shoots is called AVCHD. .mts is just the video stream, but the card holds a lot more data about the media that's needed by FCP.
2. Do NOT copy the .mts files from the card. Either import from the card or import from a camera archive. You have to copy the whole card, everything that's on the card into a folder or camera archive. Once you've done that, simply use Cmd-I and select the folder. Nothing else. You do ever have to go inside the card folder structure.
You can't use Streamclip for this.
You use the same settings in FCP as your media. When you put a video clip first into a project it will set the project properties.
When you export depends on where you're exporting to. There are many, many options for sharing.
Get a good book or online video tutorial.

When exporting and then importing Apple Mail from one mac to another I get "Some messages could not be imported. Partially imported mailbox will be labeled IMPORT" . That mailbox does not appear.

When exporting and then importing Apple Mail from one mac to another I get "Some messages could not be imported. Partially imported mailbox will be labeled IMPORT" . That mailbox does not appear.
Any help would be welcome

This is a bug in Mail. The mailbox archiving function does not include attachments, which gives the error with the import. To workaround this you can create a mailbox in Mail and copy to it all emails you want to export. Then go in Finder to [user]/Library/Mail/Mailboxes en select the created mailbox. Copy this to the public directory of your other mac. Then start Mail on that other mac and import the mailbox from the public directory. Should work now.

Why can't I open and retrieve my files from iPhoto and my address book after importing the files from my Power mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?

Why can't I open and retrieve my files from iPhoto and my Address Book after importing the files from my Power Mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?

For your addressbook, export the files to vCard on the PowerMac, then bring them over to your Mac Pro. For your iPhoto, copy the Users -> yourname -> Pictures folder to your Desktop on the Mac Pro, and open iPhoto on the Mac Pro holding the command and option keys. Select the library file from that Pictures folder and open it. It should import all the pictures into iPhoto as part of the rebuild process. Other PowerPC to Intel migration issues are covered here: https://discussions.apple.com/docs/DOC-2295

How to do a clean install go yosemite and then just install certain files, apps, documents, phopt's, etc...from time machine backup?

How to do a clean install of yosemite (have Mavericks 10.9.5 now) and then just install certain files, apps, documents, phopt's, etc...from time machine backup?

Do a backup before doing anything.
If you want to make a clean install of Mountain Lion, boot into the Recovery Volume (command - R) on a restart, use Disk Utility to Verify/Repair the disk and run Repair Permissions. Then erase the hard drive using Mac OS Extended (Journaled) format using the Options button. Reinstall Yosemite. Restart normally and test. Use Setup Assistant or Migration Assistant to import what you want.
Clean Install

I deleted a very important pages file from my iPad and I need it back

I deleted a very important pages file from my iPad and I need it back pronto! I just updated my iPad without a computer and it had the file there. I need to know how to get back the file very quickly.
thx in advance

Thne unfortunately, your document is gone. You can restore lost or deleted documents from backups if you have backups - and as long as the backup contains the document - but if you did not copy the file to your computer - or backup the iPad, the document is gone.
You really should start backup up your iPad. You can sign up for a free 5GB iCloud account right on the iPad and then you can use iCloud for backing up. You can do it right on the iPad.

In the past when I have imported my dslr video/audio files and then my zoom audio files Final Cut Pro has organized them in pairs in my library. For some reason my video/audio and my audio are being organized seperately. How do I fix this? Thanks!

In the past when I have imported my dslr video/audio files and then my zoom audio files Final Cut Pro has organized them in pairs in my library. For some reason my video/audio and my audio are being organized seperately. How do I fix this? Thanks!

Thank you Russ! Seems as though the timestamp on my audio files was completely incorrect so it placed the files far away from the corresponding video. I've modified the timestamp information and this has helped. The hour/minute information is incorrect but at least now I'm in the ballpark. Thank you!

HT4991 When I try to import word files from email it says importing then few seconds later shuts pages app

When I try to import word files from email it says importing then few seconds later shuts pages app

Peggy, thanks for the try. I think you are on to something about the multitude of sections in the sample document.
I think the many many sections are a result of the formating to make the word document look just like the legal case book (multiple columns of text, special sections, graphical headnotes summaries etc). The doc opens just fine in Word for windows 2000, XP and 2003. Maybe I can request a NON columnar flowing word doc that will be possible to open with Pages 3.
In the meantime, the other good options for these legal document downloads, PDF and HTML are not good options for processing the files with Pages. I sure hope the interoperability of Pages 3 is enhanced soon. I would rather not buy the Office 2008 for the Mac if I could stick with Apple's products.
By the way, do you know...... is there a business, marketing, or technical reason (maybe all 3)) why Text Editor seems to have greater capabilities than Pages 3 (like HTML and similar functions)?
Thanks, Brian

Can I simply copy and paste an existing library file from XP to a Mac and then copy and paste the music files themselves? Of course, the music files will be in a different location...

Hello Gurus,
I have an aged XP machine with a large music library in ITunes. iTunes will not run any longer (tried uninstalling and reinstalling etc to no avail) but the music files are backed up onto an external drive so all safe. I have purchased a Mac which of course already has iTunes installed and I can copy the music files onto the Mac, but can I simply copy and paste the iTunes library files from the XP machine to the Mac so that all of the playlists, tags, ratings etc transfer, or do I have to start again?
Thanks for the advice.

Sounds like you have a split library. Ideally you would make this portable before attempting to move it to the Mac. See make a split library portable for details.
Perhaps you can get iTunes running on the old box long enough to sort things out...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
You will also want to deauthorize the XP system once everything is working properly on the Mac.
tt2

I have used lightroom for years on my PC and just installed it on my new iMac. I cannot import NEF files from iPhoto or from my Lacie hard drive into Lightroom. I have tried Lightroom Help but still cannot import NEF files. What am I doing wrong?

I have always used Lightroom with a PC and now have installed Lightroom 3.6 on my new iMac. I cannot import raw (NEF) files from iPhoto (or from my Lacie drive for that matter into Lightroom. I have tried Lightroom Help to no avail. How do I import NEF files from the iMac into Lightroom?

If they are the same nef files that you were importing into your PC, see if the reason is an error message like the thread above this one. Permissions issue.

Hello, failing miserably here, cant import nef files from aperture 3.1.2 to iphone 4. I am syncing with the projects and smart albums and I am only able to sync the jogs and psd's Anyone out there to aid this frustrated photographer??

hello, failing miserably here, cant import nef files from aperture 3.1.2 to iphone 4. I am syncing with the projects and smart albums and I am only able to sync the jogs and psd's Anyone out there to aid this frustrated photographer??

See my reply to a later simplified version of your question. I don't think that either iPhone or iPad recognize RAW files such as NEFs. And the iPhone is not designed to be a mass storage device like a portable flash or portabel hard drive for temporary storage of files, if that's what you're after. As I mentioned in my previous reply, I have an iPad and have been experimenting with it as a tool for photography, hoping that it would be a nice travel tool for backing up and viewing photos from my Nikon dslr. But both the iPad and iPhone just are not set up to do that well. Both show photos nicely, but organization of photos is very frustrating since you can't create albums on the iPhone or iPad, but only back on your sync computer. (There is one very powerful photo organization app called SortShots, but you import photos to it and it organizes and stores the images wtihin the app not using the native photo app. It doesn't work with NEFs either.) I don't know of any RAW processing software for either device.

I import photos into lightroom and they appear just fine and then after 'developing' some disappear from the library though they still exist in the previous import window

I import photos into lightroom and they appear just fine and then after 'developing' some disappear from the library though they still exist in the previous import window

Running MacOS 10.9.4 16 Gb RAM Lightroom v5.2

Export and then re-import source files from InfoPath 2010

Similar Messages

Maybe you are looking for