Export as image sequence - image size

When I export images using the export via Quicktime as image sequence. The size of the jpg Files is always 560x960. But the movie is in HD (720x1280).
Why is that? Where can I adjust this? Anyone an idea?

FCP doesn't work with any of this media in their native formats, which I suspect is the cause of your problems. The sequence settings won't match so you should make sure everything's rendered.
BTW do you really mean 720x1280? A tall thin sequence.

Similar Messages

[Help] Export: the image size

dear all,
I am trying to export the image from AI. I set the document size 256*256 px when I create new document.
after I finish my image, i wanna export to the same size, that is 256*256 px.
however, if I use 128dpi "resolution", I will not get 256*256 px.
now does anyone now how I can get the same size of exported image as I set in the begining?
Thank you for your kind help.

File-->Export-->TIFF(save as type) & Use ArtBoards- (All)-->TIFF Options (Color Model(GrayScale), Resolution (Screen), -->OK
If you use high Resolution, your file size will become bigger, for instance, if you set the size 1inch when you create the documents, which 72pixels*72pixels you work arear. later if you use "300dpi", you will get the 300pixel*300pixel output images, if use " 150dpi", u will get the 150*150 pixels images.
my stupid question is because i didn't know the "screen" mean and didn't use it. . but anyway, it's solved with "screen'
P.S :this is the fist post for me here
PP.S: dpi (dot per inch), somehow, means ppi(pixel per inch)

Help needed exporting large image sizes

Hi All,
I'm a newbie so forgive my lack of understanding here when it comes to exporting to large file sizes. In short I'm trying to export some images for large format printing but am having trouble preparing the right size in LR4.
Specifically I'm trying to produce w 30" x h 20" images. I understand that to do this I'll need a image that is 9000 x 6000 pixels set at 300 ppi. My problem is that when I export this, with the dimensions set to width and height in pixels and resize unchecked LR4 produces an image that is 9000 x 4887?
Would appreciate any thoughts on what i'm doing wrong here? Is it simply that the aspect ratio of image is wrong to produce this size image? My concern is not producing an exact file size for printing.
Thanks!
Tom

I've sorted the crop ration for a 3:2 image but resulting in a much smaller image.
Could you give me the details? How much smaller? What size is it? What else did you change other than the aspect ratio?
I then then tried a 16:9 ratio which is much better
Details please? What is better? (And why try this if you need 3:2??)
seem to have run into a similar prob in that calculations say for a 40 x 20 I'll need 6,000 x 12,000 but lr4 will only ouutput 6,000 by 10,667.
You are repeating your initial mistake. Images cropped to 16:9 aspect ratio cannot export to a 3:2 aspect ratio. Only images cropped to a 3:2 aspect ratio will export to a 3:2 aspect ratio.

Help with exporting and image size or boundaries?

I am trying to slide the cat into the scene a little at a time foir an animation project I am working on. However, when I export the image the back ground of the image expands with a checkered back ground( showing here in white) and shows the whole cat.
How do I just show a little of the cat on the image at a time when exporting. I am trying to give the impression that the cat is walking into the room. I do not want to have to cut the cat up.
I would be thankful for any suggestions.

Provide the name of the program you are using so a Moderator may move this message to the correct program forum
This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???

Why jpeg file exported from Aperture with 300 dpi's it opens with 72 dpi's on PS ( image size)? I've tried several combinations and all give different results. And I am confused on what is the best workflow for me.

Ok.
My workflow is
RAW > Aperture Library > export jpeg high resolution 300 dpi's > one file on PS > edit > Save us jpeg. The I realised that files from PS were being save in a smaller size from the ones exported form Aperture. That is when I went o see <image size> on PS and files were with 72.
Since ten I've trying different things
1. Aperture > export as PSD > open on PS > edit > Save us jpeg = small file (around 15 MB)
2. Aperture > export as jpeg high resolution 300 dpi's > open on PS > CHANGE dpi's to 300 on <image size> edit > Save us jpeg = big file (Huge, actually)
What am I doing wrong? Would someone give me guidance and tell me what is the best workflow, considering I edit photos to deliver to my clients and I shall give them 300 dpi's.
Thank you

This is a known Aperture issue: Problem with Aperture 3.6 preset exports. | Apple Support Communities
Benjamin

When I export from Lr to CS3 my image size is 8x12 roughly, why?

I shoot RAW with a 5d mark2 I export from lr to cs3 in my workflow. I am wanting to create a gallery wrap at an image size of 24x36, when I go to create my negative space my exported image size from Lr is only 8x12, why would that be? I don't know what to do or how to make my image larger without loosing quality? I have never noticed this before? Why is it doing this now?

It will be the settings in your export menu.
clsmithphoto wrote:
I shoot RAW with a 5d mark2 I export from lr to cs3 in my workflow. I am wanting to create a gallery wrap at an image size of 24x36, when I go to create my negative space my exported image size from Lr is only 8x12, why would that be? I don't know what to do or how to make my image larger without loosing quality? I have never noticed this before? Why is it doing this now?
Check this out for how to export: http://tv.adobe.com/search/?q=exporting

Keep exported image size in HTML as shown in PDF

I have many inline formulas (imported from Word file via using mathtype) in PDF article made by ID. But when I export the articles as HTML, the images for formulas become much larger than shown in PDF version. How can i keep the exported images to the same size as they are shown the PDF file? I know I can edit the html file to specify image size, but that is the ideal work flow.
Thank you.

Hi Eric,
If i'm getting you right. you have the formulas placed as the images.
So, to keep the size fixed, In HTML export Options in image tab keep the image size as fixed.
Snapshot to refer:
Now you have image of same size as it appears in InDesign.

Exporting PNG Image Sequence in Compressor?

Hi everyone!
Can anyone help? Any Compressor pro's out there?
I can successfully export sequences via Final Cut Pro using Quicktime conversion as .PNG Image Sequences retaining the alpha channel (millions+). However in Compressor the Image Sequence settings seem to ONLY support targa or tiff, IS there a way to export the image sequence using compressor as a alpha channel PNG!
You can export the sequence as a .mov with the png codec.. but I must have it as the image sequence!
Any ideas anyone?

Sorry, but I have not been able to find an option for exporting image sequences with Alpha channel in Compressor either. I submitted a bug report about this a few months ago.
Why do you need to use Compressor? If it is for deinterlacing or resizing, you could export from FCP using Compressor, and choose to export a QuickTime movie using the Animation codec at 100%. After that, you can export your Animation file to a PNG image sequence using QuickTime Pro.
It is the only workaround I can think of at the moment.
I would recommend submitting a bug report: http://www.apple.com/feedback/compressor.html

How can I export an image from Illustrator same canvas size and custom resolution?

Hey all. i am using Adobe Illustrator CS5 for creating images for iPhone app icons the size of image 374 px 374 px and 264 ppi. i created an image same size and ppi .the problem after export the image file size changing to 1371px x 1371px and 264 ppi pixel dimension.How can I export same canvas size and same resolution file from illustrator

10111980,
If you just forget about PPI and use Save for Web, you will get the 374 x 374 pixel size.
The 1371 x 1371 pixels is because you somehow increase the resolution by 264/72.
You should never mix pixel by pixel sizes and PPI.
The 374 x 374 pixels is the actual image size. At 264 PPI that will be about 1.417 inches. At 72 PPI that will be about 5.194 inches.

Transparency problems when I distort Pdf image size (ie: 100%x99%) then Export. Is there away to fix

I sometimes have transparency problems when I distort PDF image size (i.e.: 100%x99%) then Export. Is there away to fix. Or at least be able to preflight and know I have an issue.

Mostly I have seen borders and drop shadows that will just go away or other wise not print right but only when I distort the image and only on very complicated large PDF images. When I print it at same % both horz and vert. this problem goes away.

Small image size after exporting

Hello,
When I export an image with dimesions of 4214x3371, the image size will show as 1.124x1.405''. This is a problem because I am trying to print my images on a 16x20'' canvas. My resolution is set at 3000ppi and I am exporting RAW files to an uncompressed TIFF file with my color space being ProPhoto RGB.
Any input would be appreciated, this is quite frusterating.

Let's see ... 4214 pixels divided by 3000 pixels per inch is um ... wait where's my calculator ... 1.405 inches!
of course, the whole calculation is meaningless, it has no effect on what gets printed
If you send a picture that is 4214x3371 pixels to be printed at 16x20 ... you ought to get decent prints at about 211 pixels per inch (where did that come from? 4214/20 inches is about 211 pixels per inch)
So, basically, you have enough pixels to do the print. The resolution number in the file is truly meaningless here, if you ignore it and do the math the way I did, you find out you are fine. If you try to interpret this meaningless number, well, you get misled seriously.

Export works not correct in LR5.3; ignore image size.

BUG: The export works not correct in LR5.3 When the field "Dont enlarge" are activated Lightroom ingnores the settings of image sizing and export the pictures in original size. Where can fix it?

Another option, if you're not into using plugins (Exportant) to fix:
Export in 2 groups - those needing resizing and those that do not (e.g. using lib-filters or smart-collections):
* Export those needing resizing normally (but with "don't enlarge" unchecked).
* Export those not needing resizing without resizing.
I mean, re-installing Lr5.2 may be a fine-enough work-around, but so ya know: Lr5.4 is likely to be out soon, with problem fixed...
PS - Get Lr5.2 here:
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh
Rob

WEB module export image size

Team, I am
exporting just two images from the Web Mo
dule...using the basis HTML
gallery template.
The original image size is 4972K (4.9Mb)
After I select export in the web module, the resulting image is around
200K in the content\images\large directory.
I have the "Large Images" Quality slider at 100
Is is the case...that no matter what...the image will be manipulated or reduced in size by the web module engine?
I would like the original image to be exported out to the content\images\large directory.
Is this possible?
I was just on phone with support...close to two hours...disconnected twice...but the phone support folks were not aware of what I am doing.
I am using LR 3.3 in Windows...if that matters.
Thank You,
-Rich O
[email protected]

Rich,
RichO2010 wrote:
Beat, I have not made any adjustments. Not sure where "Image Pages" are. But, under the Web module, I have tried several "Large Images" quality settings under the "Output Settings"
You find this setting under the Appearance section:
I am getting the sense that no matter what...the LR Webgallery engine wants to "optimize" the images for web output.
I just want the people that visit the site, the ability to download the original image...unaltered.
I have not found a way to go beyond 2071 pixels for image width in Web Gallery.
From what i am reading so far, I think I should just let the galley engine do its work. Then come back and upload the original images under the content\images\large (or whatever the output destination might be).
That might be a way to achieve what you want. There might be side-effects regarding borders, watermarks etc.
Beat

Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size

Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size to 7 inches on the long edge. My exported result is 457 dpi and sized at 3200x2134 pixels.. Any ideas on why this is happening and what I can do to correct it?

The DPI setting in a digital image has no meaning at all. You need to learn how to calculate what you need in your exported image. The only measurement in a digital image that has any meaning is the number of pixels in each direction. It doesn't matter what you set that DPI to (actually it's PPI or pixels per inch). The image will have the same number of pixels regardless of the setting. If you need an image that is 5 x 7" (for example) at 200 PPI then you would want an image that measured:
5 x 200 = 1000 pixels
7 x 200 = 1400 pixels
So you would need an image that is 1000 x 1400 pixels to have a 5 x 7" image at 200 PPI. The reason your exported image had such a high PPI setting is because you specified the number of inches you wanted the image to be. And there were enough pixels in the image that it calculated out to be that high PPI setting.
I apologize, I don't explain this very well. But you need to learn to do the math to determine how large you really want your exported images to be.

Export plugin - forcing specific image size

Hi - I'm trying to change the sample FTP upload plugin so that it does not give the user the option of setting an image size but instead forces a maximum height and maximum width of 675 pixels. I've figured out how to hide the 'image settings' option in the export dialog but have gotten nowhere with trying to enforce the image size.
I have added this into FtpUploadServiceProvider.lua but it doesn't work:
    updateExportSettings = function( exportSettings )
    exportSettings.LR_size_maxHeight = 675
    exportSettings.LR_size_maxWidth = 675
    end,
Any help would be greatly appreciated.
Thanks!

I found that I had to schedule a new export session in order to have new export parameters take effect - or I least thats what I did and it worked. I have a web plugin that schedules a separate export for each size: thumbnail, + bigger, ... Dunno if there's a better way.
Rob

Is it possible to export an HDMI image size?

Is it possible to export an HDMI image size?

Enter the required dimension in; Inspector > document slide size.
1024 x 768 is HD-TV pixel dimension, but there are other graphics sizes you can set for higher resolution.
Note that you need to set up the slide size first before you add objects on the slide, otherwise they will be distorted when the size is changed.

Export as image sequence - image size

Similar Messages

Maybe you are looking for