Export asynchron
Hey,
folgendes Problem:
Wenn ich meine Sequenz exportiere sind manche clips asynchron - in der Vorschau werden sie synchron angezeigt.
Sequenz: Dslr Preset - 48000 HZ - Full HD 1920x1080 25fps - quadratische pixel - progressiv - H.264
GPU = K5000 - geschnitten auf mercury engine gpu unterstützung - Musikvideo geschnitten - mit Dynamik Link - mit After effects Kompositionsverlinkungen gearbearbeitet-
aber nicht wildes - nur kleine veränderungen gemacht - kein Ebenenmodi benutzt - keine Opticalflares -
Im Schnittprogramm alles synchron - nach dem Export - immer die gleichen Stellen asynchron - nicht nur eine Stelle - sondern viele - der Rest synchron
Danach folgende Fehlerbehebung meinerseits - folgendes ausprobiert:
Der Ton von dem Studio mix der Band war auf 44.100 hz- umgewandelt in compressor auf 48.000 hz und ersetzt - nicht geklappt...
Update Premiere cs6 Pro auf 6.0.5 - immer noch gleiches Problem
Mecury engine auf cpu gestellt neu gerendert - immer noch im schnitt synchron - export asynchron
neue sequenz angelegt alle clips kopiert eingefügt außer die ae comps - effekte ausgemacht - exportiert - immer noch im schnitt synchron - nach export - asynchron
Jetzt warte ich noch auf die version vom Kunden aus Logic 48.000 HZ gebounct - danach weiß ich nicht mehr was ich machen soll ... Kunde wartet ich dreh schon durch...
Ich hab das auch mit dem Media encoder versucht - trotzdem asynchron...
Hat jemand ne Idee ?
Habe das eben auf meinem älteren Laptop mit CS 4 geprüft mit dem selben Ergebnis. Nur pcm-Export ist synchron.
OldAlf
Similar Messages
-
i want to do client copy (EXPORT AND IMPORT) in operating system level from dev client 120 to pro 500. can tell me procedure ....
i wil give u good mark
thanks & regards
sathish nagarajan .Hi
client administration SCC4
client export SCC8
client imoport scc7
Client export:
Up to 3 requests are created, depending on the data selected and
available:
1. "IDEKO01068" for transporting cross-client data, if you have
selected this
2. "IDEKT01068" for transporting client-specific data
3. "IDEKX01068" for transporting client-specific texts, provided texts
are available in this client
When the transport requests have been created successfully, the data is
exported asynchronously by starting the transport program tp at operating
system level, and can take several hours, depending on the data volume.
The status of the export can be found using either Transaction SCC3 or
Transaction SE01 and specifying the transport request.
Wait until the data has been successfully exported before you start
another client copy or transport involving the source client.
Client import:
Choose one of the above-named requests to import, in the Transport
Management System (transaction STMS) import overview. Its other
transport requests are then selected automatically.
You must post-process with the transaction SCC7 after the import.
When you call the transaction SCC7 in the target system an analysis
procedure first determines the associated transport request and displays
its ID "IDEKT01068" with the parameters of this export. Verify that the
correct transport request was selected for import.
If the transport requests are not yet in the import queue in the target
system, use the following commands:
If the transport requests are not yet in the import queue in the target
system, use the following commands:
./tp pf=TPPARAM addtobuffer <commfile name> <target sys id> u18
Example:
cd /usr/sap/trans/bin
./tp pf=TPPARAM addtobuffer "IDEKT01068" P11 u18
You can also still import the transport requests directly with the tp.
Do so in the sequence "IDEKO01068", "IDEKT01068", "IDEKX01068".
Example:
./tp pf=TPPARAM import "IDEKT01068" P11 client005 u18
Regards
George Varghese -
Is possible to use ExportController suite from a different thread?
I need to command some exports asynchronously.
Running multiple exports in parallel is not a requirement, but it would be nice at least to request them from a thread that is not the callback thread (i'm using the microsoft concurrency runtime framework)
Thank youThe main thread (exportController_ExportTimeline) has proper synchronization for waiting the result to become available
2nd THREAD ROUTINE PSEUDO CODE{
ret = pExportControllerSuite->ExportFile(pJob->pTimelineInfo->mModuleID, pJob->pTimelineInfo->mTimelineID, &ecExportRec); //deadlocks here, but in background it works (high CPU usage, output file valid)
signalExportDone(); //never reached
ADDITIONAL NOTE: when the export is fired from the second thread the Premiere progress GUI is not shown!! -
AVC H264 720p60 video with AC-3 asynchronous after exporting as AVCHD using Pre11
Dear community,
I am currently facing a problem concerning asynchronous video and sound after rendering AVC files including H264 codec at 720p60 and AC3 sound as well as multiple stereo tracks.
The video is recorded using Hauppauge Hauppauge HVR-5500HD to record DVB-C.
After editing (only cutting, no effects) and exporting as AVCHD 720p60, vbr 2pass, I get gradually increasing asynchronity. Some exports are at the beginning perfecty synchronous and get more and more asynchronous (until reaching a peak of approximately 5 minutes delay of video at a 2 hours export), others have the delay at the beginning and are perfecly synchronous at the end.
However, that issue doesn't occur with all souce files, only with some random ones! (Unfortunately the most!)
Here is the output of the souce video using MediaInfo (1 example out of many similar ones):
General
ID :
1 (0x1)
Complete name :
anything.ts
Format :
MPEG-TS
File size :
7.95 GiB
Duration :
1h 59mn
Overall bit rate mode :
Variable
Overall bit rate :
9 489 Kbps
Network name :
Video
ID :
2001 (0x7D1)
Menu ID :
5001 (0x1389)
Format :
AVC
Format/Info :
Advanced Video Codec
Format profile :
[email protected]
Format settings, CABAC :
Yes
Format settings, ReFrames :
4 frames
Codec ID :
27
Duration :
1h 59mn
Bit rate :
8 244 Kbps
Width :
1 280 pixels
Height :
720 pixels
Display aspect ratio :
16:9
Frame rate :
50.000 fps
Standard :
Component
Color space :
YUV
Chroma subsampling :
4:2:0
Bit depth :
8 bits
Scan type :
Progressive
Bits/(Pixel*Frame) :
0.179
Stream size :
6.90 GiB (87%)
Color primaries :
BT.709
Transfer characteristics :
BT.709
Matrix coefficients :
BT.709
Audio #1
ID :
2011 (0x7DB)
Menu ID :
5001 (0x1389)
Format :
MPEG Audio
Format version :
Version 1
Format profile :
Layer 2
Mode :
Joint stereo
Codec ID :
3
Duration :
1h 59mn
Bit rate mode :
Constant
Bit rate :
160 Kbps
Channel(s) :
2 channels
Sampling rate :
48.0 KHz
Compression mode :
Lossy
Delay relative to video :
-815ms
Stream size :
137 MiB (2%)
Language :
German
Language, more info :
Clean effects
Audio #2
ID :
2012 (0x7DC)
Menu ID :
5001 (0x1389)
Format :
MPEG Audio
Format version :
Version 1
Format profile :
Layer 2
Mode :
Joint stereo
Codec ID :
3
Duration :
1h 59mn
Bit rate mode :
Constant
Bit rate :
160 Kbps
Channel(s) :
2 channels
Sampling rate :
48.0 KHz
Compression mode :
Lossy
Delay relative to video :
-815ms
Stream size :
137 MiB (2%)
Language :
English
Language, more info :
Clean effects
Audio #3
ID :
2041 (0x7F9)
Menu ID :
5001 (0x1389)
Format :
AC-3
Format/Info :
Audio Coding 3
Mode extension :
CM (complete main)
Format settings, Endianness :
Big
Codec ID :
6
Duration :
1h 59mn
Bit rate mode :
Constant
Bit rate :
448 Kbps
Channel(s) :
2 channels
Channel positions :
Front: L R
Sampling rate :
48.0 KHz
Bit depth :
16 bits
Compression mode :
Lossy
Delay relative to video :
-748ms
Stream size :
384 MiB (5%)
Language :
German
Language, more info :
Clean effects
Text #1
ID :
2101 (0x835)-100
Menu ID :
5001 (0x1389)
Format :
Teletext
Language :
German
Text #2
ID :
2101 (0x835)-777
Menu ID :
5001 (0x1389)
Format :
Teletext Subtitle
Language :
German
Menu
ID :
2000 (0x7D0)
Menu ID :
5001 (0x1389)
Duration :
1h 59mn
List :
2001 (0x7D1) (AVC) / 2011 (0x7DB) (MPEG Audio, German) / 2012 (0x7DC) (MPEG Audio, English) / 2041 (0x7F9) (AC-3, German) / 2101 (0x835) () / 8001 (0x1F41) ()
Language :
/ German / English / German
UTC 2013-08-04 18:00:00 :
de:ZiB 20 / de: / news/current affairs / / 00:15:00 /
UTC 2013-08-04 18:15:00 :
de:Geld schlÈaft nicht / de: / movie/drama / / 02:05:00 /
UTC 2013-08-04 20:20:00 :
de:ZiB Flash / de: / news/current affairs / / 00:10:00 / Running
UTC 2013-08-04 20:30:00 :
de:X-Men Origins: Wolverine / de: / science fiction/fantasy/horror / / 01:45:00 / Not running
UTC 2013-08-04 22:15:00 :
de:Navy CIS: L.A. / de: / reserved for future use / / 00:40:00 / Running
UTC 2013-08-04 22:55:00 :
de:CSI: Miami / de: / reserved for future use / / 00:45:00 / Not running
UTC 2013-08-04 23:40:00 :
de:CSI: Miami / de: / reserved for future use / / 00:40:00 /
UTC 2013-08-05 00:20:00 :
de:Geld schlÈaft nicht / de: / movie/drama / / 02:05:00 /
UTC 2013-08-05 02:25:00 :
de:Navy CIS: L.A. / de: / reserved for future use / / 00:40:00 /
UTC 2013-08-05 03:05:00 :
de:Alles Betty / de: / reserved for future use / / 00:50:00 /
UTC 2013-08-05 03:55:00 :
de:Seitenblicke / de: / reserved for future use / / 00:05:00 /
UTC 2013-08-05 04:00:00 :
de:LazyTown - Los geht's / de: / cartoons/puppets / / 00:25:00 /
UTC 2013-08-05 04:25:00 :
de:Der MondbÈar / de: / cartoons/puppets / / 00:10:00 /
UTC 2013-08-05 04:35:00 :
de:Nils Holgersson / de: / cartoons/puppets / / 00:25:00 /
UTC 2013-08-05 05:00:00 :
de:Servus Kasperl / de: / children's/youth programmes / / 00:25:00 /
UTC 2013-08-05 05:25:00 :
de:Barbapapa / de: / cartoons/puppets / / 00:05:00 /
UTC 2013-08-05 05:30:00 :
de:Jake und die ... / de: / cartoons/puppets / / 00:25:00 /
UTC 2013-08-05 05:55:00 :
de:Alles okidoki / de: / children's/youth programmes / / 00:05:00 /
UTC 2013-08-05 06:00:00 :
de:Die Pinguine aus ... / de: / cartoons/puppets / / 00:15:00 /
UTC 2013-08-05 06:15:00 :
de:Anna und die Liebe / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 06:40:00 :
de:Anna und die Liebe / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 07:05:00 :
de:HÈor mal, wer da hÈammert! / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 07:25:00 :
de:HÈor mal, wer da hÈammert! / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 07:50:00 :
de:Dawson's Creek / de: / reserved for future use / / 00:45:00 /
UTC 2013-08-05 08:35:00 :
de:Der Kaufhaus-Cop / de: / comedy / / 01:25:00 /
UTC 2013-08-05 10:00:00 :
de:Tom auf heiûer Spur / de: / children's/youth programmes / / 00:25:00 /
UTC 2013-08-05 10:25:00 :
de:Alles okidoki / de: / children's/youth programmes / / 00:05:00 /
UTC 2013-08-05 10:30:00 :
de:Disneys Der Fisch-Club / de: / cartoons/puppets / / 00:25:00 /
UTC 2013-08-05 10:55:00 :
de:Scrubs - Die AnfÈanger / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 11:15:00 :
de:The Middle / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 11:35:00 :
de:Malcolm mittendrin / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 12:00:00 :
de:Malcolm mittendrin / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 12:20:00 :
de:Two and a Half Men / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 12:45:00 :
de:How I Met Your Mother / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 13:05:00 :
de:How I Met Your Mother / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 13:25:00 :
de:Malcolm mittendrin / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 13:50:00 :
de:Malcolm mittendrin / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 14:10:00 :
de:ZiB Flash / de: / news/current affairs / / 00:05:00 /
UTC 2013-08-05 14:15:00 :
de:The Middle / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 14:35:00 :
de:Scrubs - Die AnfÈanger / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 15:00:00 :
de:Scrubs - Die AnfÈanger / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 15:20:00 :
de:Die Simpsons / de: / cartoons/puppets / / 00:25:00 /
UTC 2013-08-05 15:45:00 :
de:Die Simpsons / de: / cartoons/puppets / / 00:20:00 /
UTC 2013-08-05 16:05:00 :
de:ZiB Flash / de: / news/current affairs / / 00:05:00 /
UTC 2013-08-05 16:10:00 :
de:How I Met Your Mother / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 16:35:00 :
de:How I Met Your Mother / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 16:55:00 :
de:The Big Bang Theory / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 17:15:00 :
de:Two and a Half Men / de: / reserved for future use / / 00:30:00 /
UTC 2013-08-05 17:45:00 :
de:ZiB Magazin / de: / news/current affairs / / 00:09:00 /
UTC 2013-08-05 17:54:00 :
de:Wetter / de: / news/current affairs / / 00:06:00 /
UTC 2013-08-05 18:00:00 :
de:ZiB 20 / de: / news/current affairs / / 00:15:00 /
UTC 2013-08-05 18:15:00 :
de:CSI: NY / de: / reserved for future use / / 00:50:00 /
UTC 2013-08-05 19:05:00 :
de:The Mentalist / de: / reserved for future use / / 00:40:00 /
UTC 2013-08-05 19:45:00 :
de:ZiB Flash / de: / news/current affairs / / 00:10:00 /
UTC 2013-08-05 19:55:00 :
de:Revenge / de: / reserved for future use / / 00:45:00 /
UTC 2013-08-05 20:40:00 :
de:The Closer / de: / reserved for future use / / 00:45:00 /
UTC 2013-08-05 21:25:00 :
de:Unforgettable / de: / reserved for future use / / 00:40:00 /
UTC 2013-08-05 22:05:00 :
de:ZiB 24 / de: / news/current affairs / / 00:20:00 /
UTC 2013-08-05 22:25:00 :
de:Defenders / de: / reserved for future use / / 00:45:00 /
UTC 2013-08-05 23:10:00 :
de:CSI: NY / de: / reserved for future use / / 00:40:00 /
UTC 2013-08-05 23:50:00 :
de:The Mentalist / de: / reserved for future use / / 00:40:00 /
I think there could be a problem with the pre-settings!
As i did buy PrE11 only for editing this and similar videos I would be very pleased if someone could help me solve my issue.
(Please don't tell me that I should buy Adobe Premiere Pro or any other version as them are much too expensive for my purpose and as PrE11 should be capable to do that job.)
Best regardsJust tested your suggested codecs. Works fine (at least on a 51s clip).
Only disadvantage: WinTV v7 (shipped with the TV card) refuses to show any image (just black screen)!
Regarding your last post: Details about the audio (a bit more compact)
Audio #1
Format :
MPEG Audio
Format version :
Version 1
Format profile :
Layer 2
Mode :
Joint stereo
Codec ID :
3
Duration :
1h 59mn
Bit rate mode :
Constant
Bit rate :
160 Kbps
Channel(s) :
2 channels
Audio #2
Format :
MPEG Audio
Bit rate mode :
Constant
Bit rate :
160 Kbps
Channel(s) :
2 channels
Audio #3
Format :
AC-3
Format/Info :
Audio Coding 3
Channel(s) :
2 channels
Channel positions :
Front: L R
In the presettings I didn't find a 720p 60Hz 5.1 setting (only with 1080i/p)
Thanks for help again -
Why is the audio asynchronous to the video after I've exported my project in iMovie?
Hello,
I've started a project in iMovie which lasts 25 minutes and 59 seconds. Everything is allright but when I've exported the whole project for example to iDVD, the audio gets asynchronous to the video.
The videos are mostly recorded with a Flip Ultra HD.
I use a Macbook PRO 13".Hi, I'm having the same issue. There are a number of threads on this topic, but a lot of them were around the 9.0.1 release of iMovie 11. One suggestion that seemed to help several folks is to detach the audio from the video clip so that iMovie encodes them separately on export. I understand you can do this in the event/clip editor, not in the project editor, but haven't had a chance to try it myself, planning to try it tonight.
For reference, I'm running a early-2011-model i5 MBP with Lion and the latest iMovie from Mac App Store. My video has a combination of .m4v, and .mov(AIC) source files and is about an hour long. The video and audio during the longest segment get out of sync in the export, although it seems to self-correct every once in a while, as if the software realizes it's out of sync and resets. Everything plays great in iMovie itself, of course. -
CS5/6 Media Encoder Export in MP4/QT/M2TS und AC3/AAC/MP2 Ton asynchron
Wir haben bei einigen Tests festgestellt, dass der Export aus CS6 (und auch CS5) in fast allen multiplexten Formaten mit komprimiertem Audioton, z.B. MP4, Quicktime mit AAC oder M2TS mit AC3 asynchron zum Original wird. Dies ist uns bisher nicht aufgefallen, jedoch bei näherer Betrachtung und direktem Vergleich mussten wir feststellen, dass der Ton bis zu 1/2 Videoframe nach hintern verschoben ist.
wir haben verschiedene Export Format ausprobiert und diese wieder in das Projekt eingefügt und in die Export Sequenz unter das Original gelegt. Alle bisher getesteten Formate mit PCM Ton bleiben synchron, aber alle Formate mit komprimiertem Ton haben einen Versatz (siehe Bild). Den Versatz bemerkt man unter Umständen nicht sofort, im direkten Vergleich ist er aber deutlich erkennbar.
Im Grunde sind damit alle Exporte in den gängigen Multiplex-Formaten unbrauchbar.Habe das eben auf meinem älteren Laptop mit CS 4 geprüft mit dem selben Ergebnis. Nur pcm-Export ist synchron.
OldAlf -
I try now for hours to export an MXF op1a with 8 channel audio from Premiere CC2014.1 and with AME 2014.1 to copy the file on my XDCam drive u1 to a disc.
The file is always asynchronous after 20 or 30 minutes. The project is synchronous and also other codecs are synchronous if I export them. So I think it's a bug...
I use the newest Sony XDCam drivers. Also parts with no audio can't be render with intelligent render. If I use this option, Premiere or AME crashes...
I work on a mac system with 10.8.5 OSX.
Does anybody have the same problems or any ideas to solve my problem...
Best regards,
FlorianThe following will answer both your questions a) and b).
Click on your master timeline and press cmd+0 (zero) to bring up Sequence Settings, then click on the Audio Outputs tab on the right. Click on the Outputs option and change it to 6. You can leave them as Stereo pairs.
Now, back on your timeline, you need to make sure all your audio is organised so each track. A1, A2, A3, A4 etc has all the relevant media on it.
Then, on the left of the timeline you see the Destination toggle buttons, then you see the Padlocks to lock tracks, then you have the Toggle Auto Select squares. If you right-click on the Toggle Auto Select squares you bring up a little sub-menu, at the top of this list you'll see Audio Outputs, which will show the stereo channels for that particular track. As you've changed the number of Audio Outputs in the Sequence Settings, the list will show: 1&2, 3&4, 5&6. You just tick whichever channels you want.
In your case, you have dialogue on the first 4 tracks, no problem, just go down through tracks 1,2,3 and 4 as described above and assign these to Audio Outputs 1&2.
Then just go down through your music and effects audio tracks and assign them accordingly.
Now, when you export your timeline as a self-contained media file, it will have different audio channels.
I hope that makes sense. When you change the number of audio outputs as described in the first step, I believe the rest of it is fairly self explanatory, once you know where the settings are. -
Chart asynchronous property not exporting.
Hi All,
Not sure if I've found a bug here, if you set a chart to Asynchronous Update Yes and then export and re-import the application to Asynchronous Update property will reset to No.
I've upgraded my apex to the latest version 4.0.2.00.07 and it's still a problem. Has anyone else come across this bug?
This is a major issue for me as we are not allowed to edit a version of my application that has gone live and everytime I move my application from development to live it breaks. Any ideas on this?
Thanks,
DarrenHi,
I've raised this through Oracle Support it is now a bug.
Bug 12340374: REFRESH CHART ATTRIBUTE NOT PRESERVED AFTER EXPORT/IMPORT
Just thought I'd let people know.
Darren -
Asynchronous Business Object Event not triggering Workflow
Hello everybody,
I created a workflow for processing of inbound messages (IDoc). The workflow is correctly started when an IDoc arrives. Then it prepares some data and runs into a waiting step. After the user processes the messages via a custom transaction, the workflow should proceed and send some additional information to the message origin.
I created a new BO with an event ProcessComplete, which is called in the custom transaction via the following code:
INCLUDE <cntn01>.
DATA lo_zisu TYPE swc_object.
swc_container lo_container.
swc_create_container lo_container.
swc_set_element lo_container 'VAR1' lv_var.
swc_create_object lo_zisu 'ZABC' lv_object_key.
swc_raise_event lo_zisu 'ProcessComplete' lo_container.
But when I call this code, the workflow does not continue. When I use SWEL to manually create an event on this object, the workflow only continues when I set the check box "synchronous call". So in some way, the asychronous calls disappears completely.
Can anyone give me a hint, where to look for these calls? May there be a setting not active on the system for this particular workflow? Other workflows with the same method of event handling work well.
Thanks and regards,
ChristophHello,
I debugged deeper into the whole issue. When I call the function module for the event creation directly (not via the macro posted in my initial post), I have the option to control syncronous va. asynchronous processing:
CALL FUNCTION 'SWE_EVENT_CREATE'
EXPORTING
objtype = 'ZISU_MDC'
objkey = lv_objkey
event = 'ProcessComplete'
start_recfb_synchron = 'X'
IMPORTING
receiver_count = lv_rcvcnt
event_id = lv_evtid
TABLES
event_container = lo_container
EXCEPTIONS
objtype_not_found = 1
OTHERS = 2.
The export parameter start_recfb_synchron controls this. In the program flow, the following is the difference between the two ways:
Synchronous:
CALL FUNCTION im_handler->m_linkage-recfb
DESTINATION im_handler->m_linkage-rfcdest
EXPORTING
sender = l_sibf_object_por
event = l_sibf_event
rectype = l_sibf_rectype
handler = l_receiver_por
exceptions_allowed = 'X'
xml_size = l_xml_size
event_container = lt_xml_container
IMPORTING
result = l_result
EXCEPTIONS
temp_error = 1
OTHERS = 99.
Asynchronous:
CALL FUNCTION im_handler->m_linkage-recfb
IN BACKGROUND TASK
AS SEPARATE UNIT
DESTINATION im_handler->m_linkage-rfcdest
EXPORTING
sender = l_sibf_object_por
event = l_sibf_event
rectype = l_sibf_rectype
handler = l_receiver_por
exceptions_allowed = ' '
xml_size = l_xml_size
event_container = lt_xml_container
CALL FUNCTION 'ID_OF_BACKGROUNDTASK'
IMPORTING
tid = l_trfc_id.
The first one works fine, the event gets processed, there is an entry in SWEL, the workflow continues. The second way does not work. The second function returns a tRFC ID, but when locking tRFC in the debugger and search for the call via SM58, there is no entry.
In parallel I opened an OSS message, but did not get any (useful) response yet.
Regards,
Christoph -
Export/Import and Client Copy
Hi All,
Could you please help me with what are the major differences between Export/Import...client copy...and a System Refresh.How they differ from each other.
Regards
RajeshHello Rajesh ,
I have capture some data from SAP Help :
Local Copy: Copying Clients Within a System:
You can improve the performance of the client copy by, for example, by excluding tables or packages, with Edit -> Expert Settings.
You can exclude tables from the client copy, for example if they are not relevant for the target client, in the Tables tab
Copying Clients Between Systems (Remote Copy):
The same product is installed, with the same release, in both systems
The client copier can copy a client into another system. The systems can be on different platforms. You can change the client number.
When you copy a client from one system to another, the data is transferred directly via the RFC interface - there is no intermediate storage on hard disk.
Transporting Clients Between Systems ;Client export (SCC8):
The client copier can copy a client into another system, which can be on a different platform. You can change the client number.
You are no longer required to transport clients before you can copy them between systems. You can make a remote copy instead.
Up to three transport requests are created, depending on the selected copy profile and the existing data.
The transport request for texts is e.g. only created if the source client contains customer texts.
<sid>KO<no> cross-client data
<sid>KT<no> client-specific data
<sid>KX<no> texts and forms
The data export is performed automatically asynchronously. The output of the export includes the names of the transport requests that are to be imported.
Import transport requests into the target client (STMS)
Choose one of the transport requests of the client transport in the Transport Management System (TMS). The other transport requests belonging to this client transport are then automatically added in the correct order.
Import these transport requests into the target client.
client import postprocessing (SCC7)
You need to perform postprocessing activities to adapt the runtime environment to the current state of the data.
Copy by Transport Request :
This function transports customizing changes that have been recorded in a transport request between two clients in a system.
You can choose whether you only copy the object list of the request or also the object lists of unreleased tasks in the request.
Entries in the target client are overwritten or deleted according to the key entries in the transport request.
Choose Administration -> System administration -> Administration -> Client admin. ->Special Functions -> Copy Transport Request.
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/69/c24c0f4ba111d189750000e8322d00/frameset.htm">For more info Click here</a>
Regards ,
Santosh Karadkar -
Export from Crystal Reports 2008 viewer fails if run on separate thread
I have a windows desktop application written in Visual Basic using Visual Studio 2008. I have installed and am trying Crystal Reports 2008 to run a report. Everything seems to work well except that when I preview a report (using the viewer control) and click the export button found in the upper left corner of that control, I get the following message:
Error 5: Current thread must be set to single thread apartment (STA) mode before OLE calls can be made. Ensure that your Main function has STAThreadAttribute marked on it. This exception is only raised if a debugger is attached to the process.
I am a little confused on what to do exactly. Is the problem because I am running in the Visual Studio 2008 IDE? It says this exception is only raise if a debugger is attached to the process. No, I tried running it outside the IDE. The exception wasn't generated but the application hung when the button was clicked.
It says the current thread must be set to single thread apartment (STA) mode. If the report is run on its own thread, is the "current" thread the thread the report is running on or is the main application's UI thread? I don't think I want to set my main application to single thread apartment mode because it is a multi-threaded application (although I really don't know for sure because I am new to multi-threaded programming).
My objective is to allow reports to run asynchronously so that the user can do other things while it is being generated. Here is the code I use to do this:
' Previews the report using a new thread (asynchronously)
Public Sub PreviewReportAsynch(ByVal sourceDatabase As clsMainApplicationDatabase)
Dim backgroundProcess As System.ComponentModel.BackgroundWorker
' Start a new thread to run this report.
backgroundProcess = New System.ComponentModel.BackgroundWorker
Using (backgroundProcess)
' Wire the function we want to run to the 'do work' event.
AddHandler backgroundProcess.DoWork, AddressOf PreviewReportAsynch_Start
' Kick off the report asynchronously and return control to the calling process
backgroundProcess.RunWorkerAsync(sourceDatabase)
End Using
End Sub
Private Sub PreviewReportAsynch_Start(ByVal sender As Object, ByVal e As System.ComponentModel.DoWorkEventArgs)
' The source database needed to call preview report was passed as the only argument
Call PreviewReport(CType(e.Argument, clsMainApplicationDatabase))
End Sub
' Previews the report. From the preview window, the user can print it.
Public Function PreviewReport(ByVal sourceDatabase As clsMainApplicationDatabase) As FunctionEndedResult
Dim errorBoxTitle As String
Dim frmPreview As frmReportPreview
' Setup error handling
errorBoxTitle = "Preview " & Name & " Report"
PreviewReport = FunctionEndedResult.FAILURE
On Error GoTo PreviewError
' Set up the crxReport object
If InitializeReportProcess(sourceDatabase) <> FunctionEndedResult.SUCCESS Then
GoTo PreviewExit
End If
' Use the preview form to preview the report
frmPreview = New frmReportPreview
frmPreview.Report = crxReport
frmPreview.ShowDialog()
' Save any settings that should persist from one run to the next
Call SavePersistentSettings()
' If we got this far everything is OK.
PreviewReport = FunctionEndedResult.SUCCESS
PreviewExit:
' Do any cleanup work
Call CleanupReportProcess(sourceDatabase)
Exit Function
PreviewError:
' Report error then exit gracefully
ErrorBox(errorBoxTitle)
Resume PreviewExit
End Function
The variable crxReport is of type ReportDocument and the windows form called 'frmPreview' has only 1 control, the crystal reports viewer.
The print button on the viewer works fine. Just the export button is failing. Any ideas?Hi Trevor.
Thank you for the reply. The report document is create on the main UI thread of my application. The preview form is created and destroyed on the separate thread. For reasons I won't get into, restructuring the code to move all the initialization stuff inside the preview form is not an option (OK, if you a really curious, I don't always preview a report, sometimes I print and/or export it directly which means the preview form isn't used).
What I learned through some other research is that there are some things (like COM calls and evidently some OLE automation stuff) that cannot be run on a thread that uses the MTA threading model. The export button probably uses some of this technology, thus the message stating that an STA threading model is required. I restructured the code as follows to accomodate this requirement. Here is a sample:
' Previews the report using a new thread (asynchronously)
Public Sub PreviewReportAsynch(ByVal sourceDatabase As clsMainApplicationDatabase)
Dim staThread As System.Threading.Thread
' Start the preview report function on a new thread
staThread = New System.Threading.Thread(AddressOf PreviewReportAsynchStep1)
staThread.SetApartmentState(System.Threading.ApartmentState.MTA)
staThread.Start(sourceDatabase)
End Sub
Private Sub PreviewReportAsynchStep1(ByVal sourceDatabase As Object)
Dim staThread As System.Threading.Thread
' Initialize report preview. This includes staging any data and configuring the
' crystal report document object for use by the crystal report viewer control.
If InitializeReportProcess(DirectCast(sourceDatabase, clsMainApplicationDatabase)) = FunctionEndedResult.SUCCESS Then
' Show the report to the user. This must be done on an STA thread so we will
' start another of that type. See description of PreviewReportAsynchStep2()
staThread = New System.Threading.Thread(AddressOf PreviewReportAsynchStep2)
staThread.SetApartmentState(System.Threading.ApartmentState.STA)
staThread.Start(mcrxReport)
' Wait for step 2 to finish. This blocks the current thread, but this thread
' isn't the main UI thread and this thread has no UI anymore (the progress
' form was closed) so it won't matter that is it blocked.
staThread.Join()
' Save any settings that should persist from one successful run to the next
Call SavePersistentSettings()
End If
' Release the crystal report
Call CleanupReportProcess(DirectCast(sourceDatabase, clsMainApplicationDatabase))
End Sub
' The preview form must be launched on a thread that use the single-threaded apartment (STA) model.
' Threads use the multi-threaded apartment (MTA) model by default. This is necessary to make the
' export and print buttons on the preview form work. They do not work when running on a
' thread using MTA.
Public Sub PreviewReportAsynchStep2(ByVal crxInitializedReport As Object)
Dim frmPreview As frmReportPreview
' Use the preview form to preview the report. The preview form contains the crystal reports viewer control.
frmPreview = New frmReportPreview
frmPreview.Report = DirectCast(crxInitializedReport, ReportDocument)
frmPreview.ShowDialog()
End Sub
Thanks for your help!
Andy -
H264 asynchron after rendering
dear community,
I have recently bought Adobe Premiere Elements 11 to cut recorded TV program. It was recored from DVB-C via Terrratec H5 Stick using Terratec Home Cinema.
First i tried cutting t with 2 different free programs, Smart Cutter and Avidemux. Smart Cutter always crashed during the process. Using Avidemux I always got asynchron video and sound (beginning was synchron, got more and more asynchron until I had a shift of 2 seconds at the end of the film!).
Now with Adobe Premiere Elements 11 for Windows I have the same problem after cutting off the beginning and the end (with the same video file I have an approximately shift of 45 seconds, sound is 45 seconds slower). I tried out different players (VLC, Windows Media Player, Windows Media Center), all having the same problem. Before rendering Premiere Elements plays it perfectly synchron.
input file:
Typ: MPEG-film (TS-File, H.264)
Size: 7,2 GB
Resolution: 1280x720
Framerate 50,00
Audio: 48000 Hz - compressed - stereo
Length: 1:57:35:15
Average datarate: 1,0MB/second
Pixel-ratio: 1,0
export settings:
Typ: MPEG2
Resolution: 1280x720
Framerate 50 fps
TV-Standard: NTSC
Audio: Dolby Digital, 448 Kbit/s, 48 Hz
After investing into Adobe software and rendering for 45 minutes (with Intel i7 2600k) I would have expected to get a perfectly synchron result.
I would be very pleased if you could help me find a solution.The commercial likely only contained a 2-channel (Stereo) Audio Stream, where the program content contained DD 5.1 SS in DD AC3. It sounds like you were (before you ran it through XMedia Recode) only getting the LS (Left Surround) and RS (Right Surrond), or rear channels only. Most dialog is fed to the Center channel, with some to LF (Left Front) and RF (Right Front).
Though not in video editing, I have encountered such with a home theater system, which fed Audio to a separate amp and speakers in another room - only the LS and RS channels were being fed from the receiver. To correct that, I had to replace that receiver with one that had a full second stage. In my case, the Center channel was completely missing, with little, if any LF & RF - only LS & RS.
Glad that you found a solution, and posted that.
Good luck,
Hunt -
Hi all,
I have a PowerShell script for archiving employee mailboxes after they leave the company. The script uses WinRM to connect to Exchange CAS where it:
exports user mailbox to PST files (New-MailboxExportRequest -Mailbox $user -FilePath $USER_ARCH\mail\MAIL_$user.pst)
export user archive mailbox to PST file (New-MailboxExportRequest -Mailbox $user -isarchive -FilePath $USER_ARCH\mail\Archive_$user.ps)
delete user mailbox (Remove-Mailbox $user
These 3 steps are executed one after another. Since New-MailboxExportRequest is asynchronous (only creates requests and exists), the
Remove-Mailbox is triggered right after the request is submitted. Since PST file is not created or is truncated, I believe
Remove-Mailbox actually removes mailbox even though there is active request for that mailbox. Logically the mailbox with bound active requests should not be removed and there should be warning.
I know there are many possible workarounds. Just want to know if this is by design or am I missing an option to above commands?
Best regards,
BlazThe same happens in Exchange 2010 making this seem like it is by design. I can find no reference as to how to avoid this other than by changing your script.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Hi Everybody,
Could yo pls guide me on how to implement asynchronous RFC. When i run my RFC using Report :
CALL FUNCTION 'Z_HR_NO_ALTINN_TX' DESTINATION 'Q3A2X7A'starting new task 'test'
exporting
PASSWORD = 's'.
I get the error saying :
<b>What happened?</b>
When executing the asynchronous RFC, the RFC destination "Q3A2X7A" had
neither an internal (connection type 'I') nor an R/3 communication
type (connection type '3'.
Error in ABAP application program.
The current ABAP program "Z_ALTINN_TEST" had to be terminated because one of
the
statements could not be executed.
This is probably due to an error in the ABAP program.
<b>Error analysis</b>
A typical cause of error is the
execution of external programs (RFC destinations of the type
TCP/IP) via asynchronous Remote Function Call (RFCs with the
addition 'STARTING NEW TASK taskname').
RFC destination... "Q3A2X7A"
I would like to know if async RFC call is possible to XI.
Regards,
RajHi,
you need to call the RFC from ERP, R3
with
call function XXXXX
<b>in background</b>
and Commit work.
Regards,
michal -
Asynchronous RFC call from R/3
I need to make an asynchronous RFC call from R/3. I receive an error message in R/3 stating that my RFC destination can only be of type I (Internal) or type 3 (R/3 system). In order for it to reach XI I need it to be of type T (TCP/IP). Any help would be appreciated.
Here is the function call.
CALL FUNCTION 'Z_B2B_R3_FUNCTIONAL_ACK' starting new task 'SESSION1'
destination 'RFC2XMBSERVICE'
EXPORTING
MSG_TYPE = msg_type
ORDER_HEADER_RETURN = order_header_return
TABLES
RETURNCODE = i_return.
the RFC desitnation RFC2XMBSERVICE is of type TCP/IP which by default makes it synchronous.
Thanks,
Jimhi,
have you tried:
CALL FUNCTION 'Z_B2B_R3_FUNCTIONAL_ACK'
in background task
destination 'RFC2XMBSERVICE'
EXPORTING
MSG_TYPE = msg_type
ORDER_HEADER_RETURN = order_header_return
TABLES
RETURNCODE = i_return.
commit work.
Regards,
michal
Maybe you are looking for
-
Cannot convert a char value to money. The char value has incorrect syntax.
USE [RealEstate] GO /****** Object: StoredProcedure [dbo].[search] Script Date: 03/18/2014 13:32:53 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER proc [dbo].[search] --location @locationName nvarchar(50), @parentI
-
GLT2 201 Balancing field Segment in line item 001 not filled - BAI2
Hi I am using BAI2 Lockbox format. I am on Enhancement pack 4 in ECC 6.0. I have reviewed all the threads which are based on this issue in the past. As I am already on EP 4 all those notes won't be applicable to me. I am also facing the same issue. A
-
Probs with large files in adapter engine
Hi all, in a scenario I'm currently working on, I have to process files (from file adapter). These files have 1KB up to 15MB. So I set up the tuning parameters, that files with more than 2MB are queued in this special queue for large messages. This w
-
All browsers lose internet connection after awhile
After upgrading Safari and Java yesterday, all of my internet browsers are losing connection after awhile (10 - 15 minutes), until I disable and enable Airport. However, when the browsers are dosconnected, the airport connection is still ok, because
-
I need help. I bought a laptop and I want to put my music from my desktop onto my laptop. averATEC Windows XP