Export audio

Hi, getting no response from logic pro 8 ers
I am working on soundtrack in Logic pro 8 and trying to write over original sound track with new but i am having having problems "export Audio to movie" works right through Bounce till the very end when i get "unknown System error result code = 29562 , Looked on apple site and code doesn't exist ??
Any of you folks any ideas
Thanks Ronny.

Im getting the same exact error trying to do the same exact thing as the original poster. This is the only thread ive found on the whole net about this specific error. "Unknown error" doesnt really leave much room for troubleshooting. Youd think the program could tell you little more about what the problem is, since its having an error.
Does anyone know if the update fixes this? Im really getting frustrated with this.
Thanks

Similar Messages

What is the difference between"export audio and "bounce"?

What is the difference between the "export audio" and "bounce" functions?
Do plug ins get saved with the created BWF(broadcast wave files)in the "export" function?
Or is the "bounce" method the required function to enable plugins embedded in BWF files?
Also I noticed that the "convert to SDII file" produces files not readable by ProTools.
It was my understanding that using the convert to SD II files via the audio bin is used, it would produce BWF files for use in Protools.And if you use symbols like / in your track names the files won't get converted or bounced!
Also would it not be cool if LE8 had a feature that could render BWF files small enough to send via internet file sharing and transfer apps, in other words a built in file transfer feature. Am I asking for too much.

Export audio is good to move the tracks to another application or computer for further editing.
Bounce renders the mix into a stereo track in 2 basic ways: PCM, i.e. uncompressed, or compressed (like AAC, mp3 etc.).
PCM can be AIFF, Broadcast WAV (even if it's written only WAV those are BWF), and SDII that's the standard file type of ProTools.
Note that PT doesn't use interleaved stereo files but two separate files for left and right channels, i.e. filename.l and filename.r and if you save in this way PT will accept those files for sure.
Uncompressed audio files cannot be compacted (in fact, that's why they're called uncompressed).
These days there are a lot of Internet services that permit to transfer several Gb (up to 5) for free.
If you are thinking of something like Digidelivery then you should put your attention towards Digi's products, not Apple's ones.
cheers
rob

Media Encoder/After Effects CC 2014 Only Export Audio

I've been having a strange problem with Media Encoder CC 2014 & After Effects CC 2014. If I try to export a comp either through Media Encoder or directly from the After Effects Render Queue then it only exports audio. If I bring the AE Comp into Premiere and export from there either by sending it to Media Encoder or exporting it directly from Premiere then it exports fine and gives me audio and video.
Windows 7 64
i7 950 @ 3.07GHz
24GB Ram
Quadro 4000

I've been having a strange problem with Media Encoder CC 2014 & After Effects CC 2014. If I try to export a comp either through Media Encoder or directly from the After Effects Render Queue then it only exports audio. If I bring the AE Comp into Premiere and export from there either by sending it to Media Encoder or exporting it directly from Premiere then it exports fine and gives me audio and video.
Windows 7 64
i7 950 @ 3.07GHz
24GB Ram
Quadro 4000

Problem when exporting audio from Premiere Pro v4.2.1 into wave 5.1 format

Hello to Adobe experts!
After installing of last updates for Adobe Premiere Pro (v4.2.1) and for Media Encoder (v4.2.0.006) the was a problem:
Now I cannot to export audio from adobe sequence into uncompressed wave format with 5.1 channels settings. Source m2ts video files in sequence are with 5.1 audio.
What I doing:
1) in Premiere I execute "File\Export\Media"
2) Export settings are:
- format: Windows Waveform
- audio codec: Ucompressed
- basic audio settings: 44100Hz, Channels: 5.1, Sample Type 16bit
3) After OK button it opens Adobe Media Encoder.
4) After pressing Start Queue in Adobe Media Encoder there is a message "Error compiling movie. Unknown error"
In earlier versions it worked fine.
Can you help me with this problem?
Alexander

Here are the options, from a sequence with 5.1 master track:
and with Surcode:
Notice that first one does only give stereo as an option. Nothing more. With Surcode it gives you 5.1 sound.

Export Audio to Movie - where is that function in Logic 9?

I have noticed that a very useful function in my Logic Pro 8 (version 8.0.2) options/movie/export audio to movie is not found in the Logic 9 version. One of my friends has this version (and an Intel Mac) but I cannot help him working with music and video - I cannot find it anywhere in the Logic 9 menus. Can you help?
Best, Peter Danstrup

I just opened a quicktime movie. Added an audio track, and am looking for the option indicated in the manual: "Choose File > Export Audio to Movie". Upstream it's indicated that this option only appears if a movie is present. My movie is present, but still this option does not appear?
Ideas?
-- Gerry

Export audio to video AAC not working in Logic Pro X

Hi
Anyone else have this.
When I choose to export audio to movie, and select AAC, it exports but when I chack the file, it has actally used PCM.
Regards
Keef

Did you ever manage to get this figured out?

Exporting Audio to Movie, doesn;t export the audio

When I try Option>Movie>Export Audio to movie It rendereds but doesn't actully put the music into the video. Worked in 7.1 doesn;t work in 7.2.1 any plans on fixing this?

Indeed, thats what I do, but the time saving and
simiplicity of the 'Export audio to movie..."
function puts it at the top of the 'features that
really should work' for us composers to picture!
Hopefully it will be fixed soon with an update.
It's not broken. To be sure I went and tried it myself
and it worked fine. I did not even have to set the
locators, which I thought I would have to. I just dropped
the movie on a project and went to the menu. It did bring
up some dialog box I had not seen before. Something about
adding the tracks to use. It only showed track 1 but since I
could not figure out how to add the tracks I just hit OK and
it rendered all of them. Hope you get yours back up.

Export Audio Option is Missing

I have a simple project set up - 3 video clips making up the movie, and 2 audio clip - as part of a training/testing.
I need to export the audio (they are mp3 format)
However, when I do File->Export->Audio, I have only the following choices:
Media
Adobe Clip Notes
Title (Greyed out)
Export Tape (greyed out)
Export to EDL
Export to OMF
I am guessing I have something configured incorrectly, but haven't been able to find out what. Any ideas?
Thanks
Kathy
CS4.2
Win7

File->Export->Audio
Curious. I don't have that option. Though I am still using 4.1.0.
Have you tried the standard method of File>Export>Media... and calling up the correct settings there?

Exporting audio with markers button is greyed out.... ANY HELP MUCH APPRECIATED!

Hello
so, background to the story. Now peak pro is defunkt on OSX I am trying to use Audition to create cdmasters. The idea being I will compile the album in audition, export wav files of each track including gaps and compile DDPi master in Sonoris DDP creator. Should be fine but quite a few limitations I've found already in audition.
1)Main question is this. Exporting tracks. I have compiled and added all the markers in to a 30+ track cd. I've exported whole thing to a single mixdown that includes marker but the 'EXPORT AUDIO OF SELECTED RANGE MARKERS TO SEPERATE FILES IS GREYED OUT' even if i select everything....
2)In multitrack mode, if you want to move one clip in the middle of the sequence, is there any way to select all the clips in all the following clips so that they all slip back together. I know you can zoom out and select everything but that is very boring especially when you have loads of tracks and if some are only a couple of second long soundbytes. In SAdie and Peak Pro it was very easy to set this function.
3)Moving markers. if I am moving a number of tracks is there a way of selecting and moving the relevant markers as well ? At the moment it seems like I'd have to select all clips in the boring zoom out method and then move each marker individually? Surely not...
2) & 3) are very annoying when you only want to move one clip by a few frames or seconds.
Any ideas folks ? Like i say uestion 1 is most pressing!
Thanks in advance

thanks guys, all makes sense, really appreciate it.
I will try the merging out. I was in a hurry to get a CDREF out so ended up just exporting the compiled album out as one wav from audition and adding PQ points in Sonoris. Not ideal especially as running order etc is bound to change.
I can't recomened Sonoris DDP creator enough, fantastic program and very reasnably priced. I have Soundblade LE as well but find it too clunky to bother learning, its one of the least intuitive audio programs I've ever come across.
Maybe Audition and Sonoris should team up, if you could add PQ points into audition it could become the best OSX option for compiling cd masters.
Did you have any thoughts on questions 2)&3)
2)In multitrack mode, if you want to move one clip in the middle of the sequence, is there any way to select all the clips in all the following clips so that they all slip back together. I know you can zoom out and select everything but that is very boring especially when you have loads of tracks and if some are only a couple of second long soundbytes. In SAdie and Peak Pro it was very easy to set this function.
3)Moving markers. if I am moving a number of tracks is there a way of selecting and moving the relevant markers as well ? At the moment it seems like I'd have to select all clips in the boring zoom out method and then move each marker individually? Surely not...
Thanks
Dan

Does the built-in DAC on my 2007 mid yr iMac support 96/24 audio as it supplies signal to the headphone jack? (is there a reason to export audio via optical jack then to an external DAC?

does the built-in DAC on my 2007 mid yr iMac support 96/24 audio as it supplies signal to the headphone jack? If so, is there a reason to export audio via optical jack then to an external DAC then to stereo?

My suggestion to work around this problem would be to hook up an Airport Express. The AE also has an optical out the same as your iMac. As long as your wireless connection is robust enough you should be able to stream from your iMac to your AE and then have the optical cable connect between your AE and your DAC, which then connects to your Integrated Amp/Receiver/Pre-Amp (depending on your system configuration).
I assume because you are using the optical out and connecting to an external DAC that you are looking for a high level of Audio quality ?

Can't Export Audio

Hey all, so I'm using Final Cut Pro 5.0.3, I can export video no problem, but when it comes to exporting audio, FCP will export the whole track (approx. 35 min.) but there will only be about 1 min of the audio at the begining, after that its 34 min of blank track. I'm trying to export to .aiff. Can anyone help me out?
Thanks. JCV
Dual 2GHz Powermac G5 Mac OS X (10.4.3) 2 GB RAM

The only thing i can think of is make sure you have no 'in' & 'out' points marked on the timeline... if you do, FCP will only export audio between those points...
clear markers with option(alt)+X

Exporting audio files separately from video using a Mac

Using a Mac computer, can you export audio files separately from video in Adobe Premiere Elements 11? If so, how would I do that?
Thanks as always.

I worked through the instructions in the Classroom in a Book for exporting
the video and the audio together and the audio separately, but I am not
quite sure of some of what to check in some of the categories. I would
appreciate some guidance. The purpose of sending this project is to have
my son clean up the sound.
highlighted MPEG
Presets: NTSC DVD Standard
File: Speaking Out for Healthcare for Everyone-51.prel
Save In: /Users/Barb/Desktop/New York State Single Payer/Healthcare
Stories/Videos
Advanced: clicked on
Preset: NTSC DVD Standard Or should it be widescreen
Audio Format Settings
Audio Format: Dolby Digital (Don't know what to check)
Basic Audio Settings
Codec: Dolby Digital
Audio Layer: Dolby Digital Stereo
Frequency: 48 kHz
Bitrate Settings:
Bitrate (kbps): Don't know what to check. It shows up as 192
Thanks. I don't know what I would do without this community.
barb

Exporting audio and video together for Mpeg2 dvd

Hi, I'm trying to export audio and video together for Mpeg2 dvd.. I changed multiplexing to DVD but is still exporting seperately is there something im missing? thanksa

To add, with Multiplexing set to NONE, check what the Audio format is set to. If "PCM", this is an uncompressed .wav file and will result in export of .m2v video and .wav audio (I think Mac uses .aif) and use "Import as Timeline" in Encore for both clips at once. Encore will automatically transcode the audio to Dolby AC-3, do NOT mess with settings in Encore, defaults are correct. If you have CS6, then in AME audio settings, there is an option for Dolby and you can use that to create the .ac3 audio and then Encore does NOT do any transcoding to audio or video. Note that older versions will also show "Dolby" but that is a free trial of a surround encoder, not the same. You just want the stereo option available in CS6, or use PCM option is fine
Thanks
Jeff Pulera
Safe Harbor Computers

FCPX XML not exporting audio with project...

FCPX XML not exporting audio with any project.
I have tried with several different projects to no avail.
Any thoughts or suggestions?
Thanks

I used no special setting. I even tried to just export audio. Still no audio. I checked the file with GSpot, it shows that it has audio.
Then I though I just went ahead an encode this and output to DVD as a test. It is indeed still no audio when playback on home dvd player.

Logic 10.1.1 exporting audio to movie...

There are two boring troubles:
1. Sometimes after exporting audio to a piece of movie (using locators) I hear my sounds but I see only a white screen!!!!
2. Sometimes after trying to make a short piece from the whole movie (using locators) I got the whole movie in (instead of a short piece) and my sounds start from time-code 00:00:00...
What am I supposed to do with those???
Thank you!

I have the exact same issue. I'm running Mavericks. My friend that has Mountain Lion has no issues.
Although I thought all it was doing was cutting off 4 frames in the front. But it sounds like you're saying it shifts the whole track by 4 frames, which is even worse!
Apple, fix this, please!

"Export audio of selected range markers to separate files" icon is grayed out in Markers window. Tracks show start times but no end times, yet duration is calculated.

I have one big wav file of segued tracks as a mixdown and inserted CD markers where I want marked tracks. "Export audio of selected range markers to separate files" icon is grayed out in Markers window. Tracks show start times but no end times, yet duration is calculated. Why can't I export these marked portions as separate files?

the markers durations need to be configured, there is an easy way to do this using your existing markers. click the start time of marker 2, this should change to edit mode to type in a new number, just copy the numbers cmd/ctrl+c. then click the end time of marker 1 and paste, cmd/ctrl+v. now repeat for the rest of the markers, and on the last one enter a value for the end time or click and drag on the duration to manually extend it. once all the markers have a duration, the button should be active to export.

Export audio

Similar Messages

Maybe you are looking for