Export based on folder content
Hello I've a folder and sub-folders on my Mac with about 3500 pictures in it - I'd like to re-export all those pictures from Aperture - what I was wondering is whether there is a way to basically create a file list with all the pictures in those specific folders on the Mac and pass that list somehow to Aperture to make the selection of the images that need to be exported again. Hope the community has some solutions - thanks
If the versions you exported are named by their version name it would be possible to create an Applescript that would first get the names of the files and then call Aperture and export those images again.
If the version names were changed on export it will be a lot more difficult or possibly impossible to do this.
One other difficulty will be setting up the export preset that you want to use. Were all these images all exported with the same preset?
How were the images organized in Aperture? Is there no identifying feature that would let you find these 3500 images in Aperture? There is a smart folder rule under Photo Usage - Has been exported, perhaps you could use this along with some other rule to find the images in Aperture?
regards
Similar Messages
-
Export versions based on folder content
Hello
I've a folder on my Mac with about 3500 pictures in it - I'd like to re-export all those pictures from Aperture - what I was wondering is whether there is a way to basically create a file list with all the pictures in that specific folder on the Mac and pass that list somehow to Aperture to make the selection of the images that need to be exported again.
Hope the community has some ideas - thanksYes it is possible but you will need to do this as an Applescript. It's not to bad as long as the file names of images on your HD correspond to the name of the image in Aperture.
You would first go through the folder making a list of the file names and then have the script tell Aperture to export the images. Or possibly doing it one at a time, get the first file name and have Aperture export it. Hard to say which way would be best without knowing more about the situation.
Also is this a one time thing or will it be ongoing? -
Export KM File/Folder Permisions.
Hi,
Were using the ACLSecurity manager for our file/folder permisions and wondered if it is possible to export the permisions from our QA to Production environments?
Many ThanksHi Detlev,
Can I understand it as below?
As far as Paul's scenario is concerned, he can transfer the file/folder content along with permissions(ACL) from his QA System to his Production System using the ICE protocol.
After that he has to manually assign the Service ACL permissions to the folders/files?
Does that work in that way? Am I right in my understanding?
best regds,
Alagammai. -
Setting up to View Folder Contents in Browser
I have placed 40 jpg images in a folder on my web site. How
can I let visitors view the file names (folder contents) &
select an image by name.
I hate to have to make a page & enter all 40 image file
names with links to the files. Is there a better way to do this?
Thanks,
DennisOn Tue, 25 Jul 2006 20:34:34 +0000 (UTC), "dvhughes"
<[email protected]> wrote:
>I have placed 40 jpg images in a folder on my web site.
How can I let visitors
>view the file names (folder contents) & select an
image by name.
>
> I hate to have to make a page & enter all 40 image
file names with links to
>the files. Is there a better way to do this?
You could enable directory browsing in the directory, but
then you'll
need to accept the rather ugly server default index page. If
it were me,
I'd write a short script that read the directory and
displayed a more
attractive listing. How you would go about that would depend
on what
server scripting language(s) you have available on the
server.
Gary -
apple loops for garageband pack doesn't show the folder content (loops, files...) in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.
Thanks Barney, I tried that but all that comes up in Spotlight are the log files that show the file paths! I don't know how Steam works. Are all the files held by Steam on their server perhaps?
-
I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?
I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?
-
can we control the PDF file name that is generated by BI Publisher based on the content in the input PDF?
No, there isn't. The way you're using the file is not recommended. You
should use a review tracker to avoid getting in the way of one another. -
Create a group based on file contents
Hello!
I'm investigating options to create a dynamic group based on periodic check of file content. I have a Shavlik updater which is patching custom groups based on file contents. I would like to create a dynamic group which should return all Windows Computer
classes that are found from this file. Anything close to sensible was found at https://www.youtube.com/watch?v=gxASdzHFTOU where author created an attribute of based on "SELECT * FROM CIM_DataFile" and then created a group out from it - but it checks
file existence, not content, would launch against all Windows Clients (and we have 1000+ of these monitored) - certainly not a valid way.
Is there any way I could do that in a simple, straightforward way?
Thanks in advanceOk, I got it. Have you tried modifying the group membership with powershell?
Modifying Explicit Group Membership in SCOM 2012 with PowerShell
http://blogs.msdn.com/b/rslaten/archive/2013/06/27/modifying-explicit-group-membership-in-scom-2012-with-powershell.aspx
Automate your group creation with Powershell
http://blog.coretech.dk/kra/automate-your-group-creation-with-powershell/
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
My iTunes library contains a combination of music/movies/etc that I've purchased or downloaded from the iTunes Store as well as music I've purchased from Amazon and my own ripped CDs (not ripped via iTunes...other software). The Amazon and ripped files have always lived on my D drive (for easier sharing betwen family members, without opening up permissions on our User folders), while the Store files all live under my User profile on C.
I'd like to move the iTunes Media folder contents off of C and onto D. All the instructions that use "consolidating" and "keeping the media folder organized" will not work for me, since I do not want all my files under the iTunes Media folder...I like them where they are now in D:\Music\Amazon and D:\Music\CDCollection.
Do I have to resort to moving the files myself, adding them into the library again, then cleaning up the orphaned library entries that are pointing to the old location?
Thanks!Copy the entire iTunes folder from your music folder to D:\iTunes.
Click the icon to start iTunes and immediately press and hold down the shift key. Keep holding until asked to choose or create a library.
Click Choose and navigate to the file D:\iTunes\iTunes Library.itl
Check the library is working properly.
Use the option File > Library > Organize Library > Consolidate Files to import any stay files to the new library folder.
Delete the old iTunes folder on the C: drive.
Ideally you will also backup this library to another drive.
tt2 -
Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.
cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns. -
Sorting incoming files based on payload content
Hi,
I have a file>XI-> FILE scenario...I need to sort the incoming file based on payload content...But my understanding is in XI each line item would be processed one at a time...Is it possible to sort the entire file before beginning to process???
-KenHi Ken,
you can try to create generic content sorting with java mapping:
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
Regards,
michal -
Display webpart based on list content
Hello,
Is is possible to either display a custom home page or a different web part based on if content exists in a list or not?
I have a list configured for data entry. From that data, I use SQL reporting services to generate and display graphs and pretty stuff.
Is is possible, for when a user logs into sharepoint (2013), if they have not entered any data yet, then display the data entry form, or if they have already entered data, display the reporting services dashboards?
Andrew Huddleston | Hillsong Church | SydneyYou can use javascript client object model to first check if the current logged in user has the data entered in the list on page load and onsuccess method of your javascript async call you can check if you have retrieved any count for the user in the list.
If data exists then using jquery either show your reporting webpart or hide it and instead show your data entry form. Below are some pointers
http://sharepoint.stackexchange.com/questions/73032/get-current-user-in-client-object-model-with-javascript
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c437ecc4-c757-483f-8175-f92860d184be/hideshow-webpart-data-on-buttonclick-using-jquery?forum=sharepointgeneralprevious
http://msdn.microsoft.com/en-us/library/office/jj163201%28v=office.15%29.aspx#BasicOps_SPListItemTasks
Geetanjali Arora | My blogs | -
Why does my exported swf show more content than actually on frame?
Why does my exported .swf show more content than actually on frame?
My problem is relatively simple, though, I had some trouble finding a solution to it:
When I play my exported animation using flash player in Google Chrome, if the window is bigger than the resolution flash document/frame, it shows content not meant to show up on the frame -- like parts of a huge background that aren't supposed to show up yet.
In other words, how do I constraint the .swf to the white background/document resolution?Anyone? I'd appreciate it if someone replied soon -- I am done with my project once this issue is resolved, and I am excited to publish it.
Please respond if you have any useful knowledge on the matter!
Thanks! -
Imac slow to display folder content
Hi,
My Mid 2010 Imac 3.06 GHz Intel Core i3 with 4GB 1333 MHz RAM is currently having problems displaying folder content. As I am a photographer I am often opening folders of images and needing to view them and recently when I click on a folder or sub-folder the images can take upto a few minutes to display (making it look like the folder is empty). It only seems to happen intermittently.
I have already checked hard disk space and have 371 gb free space. I was also advised to look at the green coloured free memory segment in the pie chart on the Activity Monitor which was very small. Since closing lots of programs which were sat on my dashboard and also deleting some items off of my Desktop this has now improved and is running around the 475 MB mark. Despite this, the displaying of folder content has NOT improved in the slightest.
Can anyone help?
Many ThanksSurprising that the RAM hasn't improved things. Once you've resolved the current issue I'm sure you will notice a boost in performance 12gb is ample RAM for most uses.
Before re-installing it is vital to have a backup of all your data so that you can restore in the unlikely event of a problem. Re-installing the OS will not delete you data, but backup - at any time - is essential. An up-to-date Time Machine backup or a bootable clone of your HD using an application such as Carbon Copy Cloner or SuperDuper! will do the job. Many on here keep both forms of backup.
If you do decide to re-install the OS you can do it from the Recovery HD. Restart holding down Command + R and from the screen with 4 choices select Re-install OS - you'll need an active internet connection and you might need to input your AppleID credentials to perform the install. It's a 4gb download so it might take some time, depending on your connection speed.
More details here: http://support.apple.com/kb/HT4718 -
Duplicate checking based on the content of the incoming file
Hi,
We have a requirement where in we have to check whether a file has been duplicated or not based on the contents of an incoming file.The threads which I have seen in SDN deal with the duplicate checking based on the filename of the incoming file.
The incoming file has the following structure :
Recordset Occurance-1
|....... Idoc Occurance 1...unbounded
|...... segment Occurance 1
We are required to make a check based on certain fields which occur in the segment.There are about 4 fields which we will have to take from the incoming file and carry out the check.These 4 fields exist in different segments.We will have to update a ztable with these 4 fields and then perform an rfc lookup to check for the contents of the incoming files with this table,and reject or process the file based on whether the entries exist in the table or not.
Please let me know if there is any way this can be achieved.
Appreciate if anyone could help me on this.
Thanks and Regards,
IndujaSAP PI 7.1 Mapping Enhancements Series: Graphical Support for JDBC and RFC Lookups
Use this crazy piece for any RFC Mapping Lookups!
The specified item was not found.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5877---- [original link is broken] [original link is broken] [original link is broken]
Imp
SAP NetWeaver Process Integration 7.1: Mapping Enhancements Blog Series
SAP PI 7.1 Mapping Enhancements Series: Mapping Enhancements Demo
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
How to check JDBC SQL Query Syntax and verify the query results inside a User Defined Function of the Lookup API
The specified item was not found.
The specified item was not found.
Making CSV File Lookup Possible In SAP XI !!!
SAP PI 7.1 Mapping Enhancements Series: Parameterized Message Mappings
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1888-----Imp [original link is broken] [original link is broken] [original link is broken]
Triggering XI Alerts from a User Defined Function
Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part II
Maybe you are looking for
-
Hi, We all know Linux has it, but Windows doesn't. Well there is a nice German bloke that wrote a very good tool to solve this in Windows. http://www.dexpot.de/index.php?lang=en The program is free for private users and works very well. Enjoy!
-
Ipod not in dropdown list and itunes won't play from ipod after 8.1download
ever since I downloaded 8.1 itunes my ipod no longer appears in the dropdown list (right click on song or podcast - add to playlst) when i want to transfer a song or podcast to my ipod. My only option is to drag and drop now. Also I cannot play on my
-
Hi, My storage admin created RAID10 and RAID5 for database, I would like to know which RAID Level is best for keeping the REDO logs. Can someone tell me what's best for REDO? Thanks
-
ITunes 11.1.2 not showing Uploaded Matched
It seems Apple took away the column in Songs view that says Waiting/Uploaded/Matched. Is this so? Talking lates Mavericks iTunes.
-
Hi there, I'll try and provide some background information first: We use a HP LaserJet 4250 as a network printer and documents are sent to this printer via a server. Thousands of reports are printed daily and it is a mission cirtical printer (althoug