Export Book to PDF shows bad colours

Hi all,
I have created a book in Aperture, starting from a set of RAW/TIFF pictures.
If I preview/export the book in PDF, it looks VERY BAD in the dark areas (posterized to very few RGB tones).
The problem appears ONLY when I use the "Save as PDF" option from the "Print Book" menu, or I make a preview before placing the order.
What I tested so far:
- If I export from Aperture each single image to PDF (or tiff/jpg), the problem does not occur!
- The images look perfect also if I open them from other apps, like photoshop/iPhoto/preview.
- I created a test book with the images from iPhoto and there the exported PDF book looks fine.
- I installed Aperture on a different computer (a mac mini recently reinstalled), and the problem is still there.
Please consider that:
1. my monitor (iMac 24") is hardware calibrated
2. the source pictures are in RAW (no color profile on them) and (just a couple) in TIFF (16bit, Adobe RGB). I also tried reimporting in the album jpg converted versions, with no better results.
3. OS and Aperture are updated to the latest versions.
I would exclude a problem of the source images (because Aperture/iPhoto can export them properly to PDF)
It looks to me like a problem of the PDF rendering engine when used for exporting Aperture books.
Anyone had ever experienced something similar?
Any advice?
If you want to check with your eyes, I uploaded a few screenshots here:
http://www.dropbox.com/gallery/5695776/1/Test?h=0a0f16
Thanks in advance!
Marco
ps. I've posted this message also on the other Aperture's discussion group, please apologize for the repetition.

It seems the same my problem:
look here: https://discussions.apple.com/thread/4760913

Similar Messages

Export book to PDF doesn't remember previous settings - CS5

I've just noted a somewhat annoying "bug" in the book export. When I export book to PDF--which I do a lot--I have to rename the file and reselect the type of PDF I'm exporting every time. It should remember the last settings I used.I believe in the past that it did.
I also really hate that it always defaults to the interactive PDF--which I will probably never use. Half the time I forget to check that setting, rename the file, click OK, and then have to cancel and go through all the steps again because I forgot that the stupid thing can't remember that I want a Print PDF. I have gone through this annoying misbehavior several times in just the last few minutes. Add that up over all the hours that I work on books and do that export and we're talking about a huge time waster. Am I missing a way to set a defaullt here?

The book export or the regular export? Mine definitely always goes back to interactive PDF. Even after I've saved a print PDF several times. It's really annoying.

Is it possible to create a keyboard shortcut for "Export book to PDF"? (Cannot find it in the Keyboard Shortcuts window.)

I'd like to create a keyboard shortcut for the "Export Book to PDF" command on the Books panel menu, but I simply can't find that command in Keyboard Shortcuts. After not finding it in what seemed the logical place (Keyboard Shortcuts > Product Area: Panel Menus > Book), I've looked through all the Product Areas listed on the dropdown menu -- but it seems I must be missing something.
What do I need to do / where do I need to look to assign a keyboard shortcut for this command?

Sorry, I agree that that is missing in action. I don't know of a workaround unless someone has written a script. Scripts can be called with keystrokes.

Export Book to PDF does not honor chosen PDF preset

When I choose "Export Book to PDF" from a book panel in InDesign CS4, and select an Adobe PDF preset, the resulting PDF has downsampled images even though my preset specifies no downsampling for images of 300ppi or more.
No downsampling occurs when I export each book document to PDF through the File menu.
Has anyone else experienced this?
Also, when I print a book, linked Illustrator files with status of OK are rendered like low resolution screen previews if they are not in the first document.

I ran Preflight on both books and found no issues, no missing or modified links. I don't have any copies of the documents in the books, so that's not it.
But you did point me in the right direction. InDesign was not checking the links before exporting or printing books.
If I go to Preferences > File Handling and select "Check Links Before Opening Document" and "Find Missing Links Before Opening Document" InDesign exports/prints the links instead of the previews. Problem solved! Thanks.

Crash when exporting Book to PDF

I am trying to export a Book (17 documents, 1822 pages) to PDF. It keeps crashing on the 7th document. I can export that document by itself (148 pages), no problem. I can export documents 1 thru 6 together (472 pages) , and 8 thru 17 together (1202 pages), no problem. But when I try to export the entire book at once, it crashes or freezes on that 7th document. Sometimes it crashes, sometimes it freezes. I've tried exporting that document to .IDML. I've rasterized two embedded PDF's that are on the page where it freezes, just in case there was something corrupt in those PDF's. I'm at my wits end ...

OK, I THINK I have this solved, it is still exporting but has gone beyond the trouble spot. The entire export process takes almost 30 minutes, and I'm only 10 minutes in, but here is what I found. The problem images came from Excel. At first I thought it might have been because I just copied and pasted them from Excel, so I went back and exported them as PDF's from Excel and "placed" them in InDesign, but that didn't solve the problem. So then I rasterized the PDF's in Photoshop, and that seems to have worked. I'm not sure why these particular images created a problem, because I have many other charts from Excel scattered throughout the Book.
Here is the process I used. Instead of "packaging" the whole works, I just duplicated the file I thought was the offending one and left the duplicate (Copy 1) in my working folder. I deleted a group of pages in the duplicate, then "replaced" the file in the Book with this duplicate and ran the export to PDF process, recording the results as Test 1. That test worked. I duplicated the original again (Copy 2), deleted another set, and ran the test again, recording the results as Test 2, and so on. Test 7 is the one that seems to be running successfully right now.
John, I really appreciate the quick and comprehensive answers and discussion regarding this problem, it helped me focus on a process that isolated the problem and allowed me to fix it.
BTW, the issue of "packaged" images overwriting others with the same name happened in PageMaker. It was panic time when I printed out a final proof of my work, and the same figures kept showing up over and over in different authors' articles. I don't know if it would occur in InDesign because I don't send InDesign files to the printer ... they all seem to prefer PDF's, which is easier for me anyway.
Now that I've taken so long with this response, the export is finished and IT WORKED! YAY!!

Page numbering when exporting book to PDF - ID 5.5

I'm having a lot of trouble exporting a PDF from a book file in Indesign 5.5, running on Snow Leopard.
On certain pages it appears to place the page numbers randomly in the middle of the artwork.
I am using master pages for the numbering. On most pages it works fine, but on others this problem will appear.
I understand that 5.5 has had issues with the Export to PDF from a book file, I recently installed an update which I understand was supposed to fix these issues, but the problem still persists.
Has anyone experienced this issue, or have any methods to resolve it? A screenshot is below which shows the correct position on the left, and the incorrect position on the right.
Numbering appears fine in the ID file itself.

Try exporting the files to .idml (see Remove minor corruption by exporting) and resave.

FM10 Book to PDF - show title (not PDF filename) in Reader header?

FrameMaker 10.0.2.419 + Distiller X Pro 10.1.438 -> Adobe Reader X
I have a FM book file with a title along the lines of 'Worked Examples'. When I save it to PDF with Distiller and view the PDF in Adobe Reader X, the reader's header bar shows the PDF filename e.g. wex.pdf, but I want it to show the book title Worked Examples.
I assume there's a setting in Distiller that forces Reader to show the book title not the file name, but having trawled through the settings/help/forums I can't see it. It's probably blindingly obvious (when you know the answer!), but can anyone tell me how I can get Reader to show a book's title in its header?

Note: I have partially solved this issue by loading the PDF into Acrobat X Pro and going to File > Properties, and on the Doc Properties > Initial View tab selecting 'Show = Document Title', and then saving the PDF. I'm hoping to figure out (or get told!) a way of achieving this from my FM10 book file though.

Exporting Book as PDF, page range?

Is it possible to export a book as a PDF with a page range? The page range option is grayed out?

For exporting to PDF from a book, it works different than an individual document. If you only want some of the book chapters going to PDF, select only those chapters in the book panel. Then Export to PDF... becomes Export Selected Documents to PDF....

LR 4 exporting Book into PDF

While useing LR 4 and makeing a Book (13x11 w/164 pgs) when I go to export a PDF it freezes up everytime around the 150ish page. also when I go to export a blurb it loose pages over 50ish
Thank you
Michal Tuzinkiewicz
858.699.6819
[email protected]

You are probably running out of memory if you are freezing up at around 150 pages. The other possibility is that there is something Lightroom doesn't like about the image being processed once you get to that page, but you would need to test with a different set of images or change the order to verify.

Constant trouble exporting book to PDF

I have NEVER had any real luck getting a book to export to PDF with CS5 (nor CS3 previously) on the PC. Constant crashing at various points in the process. I'm now trying to export just a portion of the document to see if that will work. Right now, I'm trying to export the first FIVE files (document has 27 files and 674 pages) only, and it is taking a ridiculous amount of time. I'm watching it open all 27 documents at various times --some chapters REPEATEDLY -- which I guess could have something to do with hyperlinks inside the early chapters leading to the later chapters. Not sure. I suppose this could be a memory issue, but I have been unable to confirm this, and I did re-boot and open only the book so I'd have as much free RAM as possible. Since it happens at various point in the process, I doubt it is a specific image that is causing this, but again, not sure. Does anyone have any suggetions on how to troubleshoot this issue? It is incredibly frustrating, as the time it takes for this process to evolve means that I really cannot get much work done during the day.

Divide and conquer.
You hit the right idea by deciding to try some chapters on their own.
If these export ok - then they are fine - move onto exporting the next set of files and keep going.
If you encouter a problem then try half of that set again, then the other half and keep narrowing it down.
It could be a faulty book file though - try creating a new Book and then import the documents again and see if that clears it up.
Have you tried opening all the documents before trying to export to print? If all the docs are open it shouldn't need to open them again?
To let you know it's not a bug or anything - I've done books over 3,000 page with about 40 documents per book.

Lightroom 4.4 won't export books as PDF or to blurb. No error messages at all.

Window 7 SP1, 64 bit
Lightroom 4.4
I made a 178 page book I'd like to buy but when I press the 'send to blurb' button or the 'export as pdf' button nothing happens. No pop up screens, no error messages, no progress bars, nothing.
I mad a sample empty book and it gets the right blurb stuff to pop up so it must have to do with the files or the overall size of the book.
I also did a duplicate book of the one I want and tried that but it failed in the same was as the original.
Looking at my windows task manager doesn't indicate the lightroom is rendering anything so I don't believe it's doing anything.

I took this advice found within this thread: Issues when uploading book to Blurb from Lightroom 5
Select Apply Background Globally - turn it off and on several times, then leave it off
Select GRAPHIC - turn it off and then turn it on and off several times
Select BACKGROUND COLOR - turn it on then off then on then off
I did this to the first 10 pages or so and now I got the blurb popup and it appears to be rendering and uploading.

Combining documents with multiple layouts into a single book for pdf export

I have made a series of documents that feature 3 different layouts, however I would like to connect all these documents into a book and then export 1 layout style from each document into a pdf to form a book. However when I go to the export book as pdf the option to select pages or ranges is greyed out and not clickable for some reason, does anyone know of another way to get around this short of exporting each individual document layout and then merging them as a pdf?

You need to set up the book to contain precisely what you want to export.
However, it is basically better to export single documents and merging them later as PDF, regarding colour spaces, page numbering, paragraph styles, page formats etc.

Print/Export book as spreads

It is possible to make a InDesign book print or pdf as spreads. But the last page of an document/chapter and the first page of the next document/chapter are always single pages! Therefore many dtp-ers choose not to use the InDesign book option, but make the complete book in one document.
I would love to send my complete InDesign book as pdf in spreads for email review. Please let the first and last page of the book documents be exported as spreads, as if it was made in one document.

Found out how to make a PDF in spreads from a InDesign Book document... Also the last page of a document/chapter and the first page of the next document/chapter will be printed as a spread! YEAH...
I do believe there must be a more efficient way to do it, but since nobody could tell me how... I have to do it the inefficient way! This is how i did it:
* Make a single page PDF of the InDesign Book document (indb)
In the menu of the InDesign Book panel/window select
- Export Book to PDF
* Open PDF in Acrobat Professional (PDF 1)
* Delete first page !!!
* Save As... (different name) (PDF 2) !!!
* File Print...
* Print (pop-up window)
- Printer: Adobe PDF 8.0 / 9.0
Copies & Pages (Print submenu)
- Page Scaling: Multiple pages per sheet
- Pages per scheet: Custom: 2 by 1
- Page Order: Horizontal
Layout (Print submenu)***
- Pages per sheet: 2
! ATTENTION: check the page order before printing
in the preview of Copies & Pages submenu!
[Print]
* Save (pop-up window) will pop-up
Save As: ... (documentname)(PDF 3)
Select location on you computer
[Save]
* Open PDF 1
* and open PDF 3
* Select first page off PDF 1
* Drag an drop it in front of the spreads of PDF 3
* Save this PDF (PDF 4)
Now i have a PDF of my book in spread,
except for the first page, which is a single page.
Unfortunately there is a white margin/area around the spreads,
because the Acrobat Print option Multiple pager per sheet does not make the pages Fit/Shrink to Printable Area.
Footnote *** Layout (Print submenu); Pages per sheet: 2
First i did not select this option, Acrobat was mixing up the Pages in the wrong order.

I am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me

Dear ALL,
i am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me solutions.
var myBookFileName ,myBookFileName_temp;
                if ( myFolder != null )
                        var myFiles = [];
                        var myAllFilesList = myFolder.getFiles("*.indd");
                        for (var f = 0; f < myAllFilesList.length; f++)
                                    var myFile = myAllFilesList[f];
                                    myFiles.push(myFile);
                        if ( myFiles.length > 0 )
                                    myBookFileName = myFolder + "/"+ myFolder.name + ".indb";
                                    myBookFileName_temp=myFolder.name ;
                                    myBookFile = new File( myBookFileName );
                                    myBook = app.books.add( myBookFile );
                                   myBook.automaticPagination = false;
                                    for ( i=0; i < myFiles.length; i++ )
                                               myBook.bookContents.add( myFiles[i] );
                                    var pdfFile =File(File(myFolder).fsName + "\\"+myBookFileName_temp+"_WEB.pdf");
                                    var bookComps = myBook.bookContents;
                                    if (bookComps.length === 1)
                                                   bookComps = [bookComps];
                                     var myPDFExportPreset = app.pdfExportPresets.item("AER6");
                                    app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFEx portPreset,bookComps);
                                  //myBook.exportFile (ExportFormat.pdfType, pdfFile, false);
                                  //myBook.exportFile(pdfFile, false, pdfPref, bookComps);
                                    myBook.close(SaveOptions.yes);

Change the below line:
app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset,bookComps);
to
app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset);
Vandy

How do I make two page spreads export correctly to pdf with a book file?

I have a book I am working on in the book pallet. I have several documents in the book and have it set to auto update page numbers and keep it all organized, which is all good. However, when I export to pdf, though the page numbers and order is correct, for some reason, if it is an odd number of pages I get spread, spread, single page, spread.
Just how the first page is always single, any last pages of a document that has an odd number of pages always gets singled out and the next document resumes in spread format. This is all in one pdf file, which I exported from the book pallet with none of the documents selected or open. I have the box for spreads checked, and it is doing spreads, but just not linking documents as spreads.

You can use a multipage importer to import a single Page PDF into InDesign.
Create a single page PDF
Create a facing pages document the same size as your original file
Multi-page place the entire pdf into facing pages (automatically done by script)
Export entire book to PDF as spreads.
http://indesignsecrets.com/zanelli-releases-multipageimporter-for-importing-both-pdf-and-i ndd-files.php
I say to do this with a singe pages PDF - because I don't think it will import multiple InDesign files, you'd have to place them individually - and with my experience it takes longer to import multiple indesign files - so I just use a single pages PDF.

Export Book to PDF shows bad colours

Similar Messages

Maybe you are looking for