Export BR's from 9.3.1 and import them to 11.1.2.2

Hi All,
I am working on exporting the Business rules from 9.3.1 and import them to 11.1.2.2. I was able to export the BR's and import them but its is giving me the error that *"the import was unscucesfull as no objects were found"*.
when I looked in the document it mentions after selecting the BR's that we export it will open a *"Enter source Repository information"* dialog box which I don't see.. can anyone please help me with this..
Thanks

Hi John,
I went through the document and in there it says we can migrate business rules from previous versions only if it is EPMA and not classic. Is that true? we are using classic planning for both 9.3.1 and 11.1.2.2. we want to migrate Business rules from 9.3.1 to calculation manager 11.1.2.2
Can we do a migration for the above?
I saw it in page no. 253 of "http://docs.oracle.com/cd/E17236_01/epm.1112/cmgr_admin.pdf". Please clarify me if we can do this migration
Thanks!

Similar Messages

I want to take photos from someone's gallery and import them into my iphoto. what's the best way to do that?

A friend sent me a gallery. I select the pic I want and download. They show up on my screen in Preview. What's the best way to get them into my Iphoto library?

Greetings,
Drag them from where you downloaded them (Like the Downloads folder) and drop them on the iPhoto icon in the dock (little camera with the sunset behind it).
When you drag and drop an image on the iPhoto icon it imports that picture (or many pictures if you drag more than one at once).
Cheers.

Cannot export address book from 5.0.1 and importing to 4.1.2

I don't think that this problem has been dealt with anywhere.
I created an address book archive on my intel macbook pro running snow leopard and address book 5.0.1. I then tried importing this to my desktop which is not intel and is therefore running leopard and address book 4.1.2. It doesn't seem to open. It seems to erase all of my contacts instead, but then when I quit and reopen address book they are all there.
This is weird. I have done this before, in reverse, and had no problems.
Any good ideas out there? Many thanks.

Exporting from a new version of AB to an older one is always problematic because of differences in the databases. It may be better to simply select all your contacts then drag the selection to the Desktop which should create a vCard file. Then drag the vCard file into the other AB on the other computer. It should import the vCard file without issue. This should avoid any problems arising from the differences in the AB version involved.

I get poor picture quality when I export my slides from keynote as jpeg and print them as a photo, any help?

I made a slide of multiple pics and objects, I am trying to export it to an 8x10 photo, the shop I am using only allows jpeg. The quality is so poor when I print it, is there a way to get better quality as I export it? I used keynote because I could set up a custom slide size (8x10) and then added the pics and other graphics in hope I could export as a jpeg and get a good quality photo? The photo images and slides are good quality it is the exporting where I am loosing clarity.
Ugh any help?

I made a slide of multiple pics and objects, I am trying to export it to an 8x10 photo, the shop I am using only allows jpeg. The quality is so poor when I print it, is there a way to get better quality as I export it? I used keynote because I could set up a custom slide size (8x10) and then added the pics and other graphics in hope I could export as a jpeg and get a good quality photo? The photo images and slides are good quality it is the exporting where I am loosing clarity.
Ugh any help?

Export 2 specific folders from users A mailbox and transfer them to user B Via Powershell

Hi
i know there is a simpler method for the user to export the folder within outlook as a PST file and send it to the other user to import... but
Is there a powershell command sequence i can use that will export folders from User A mailbox and import them into User B's mailbox remotely so they don't have to do anything.
Many Thanks
Gordon

i made some progress with the following
New-MailboxExportRequest -mailbox "User A" -includeFolders "User A\\TransferFolder" -Filepath \\server\serversubfolder\transfer.pst -verbose
then using
New-MailboxImportRequest -mailbox "User B" -FilePath \\server\serversubfolder\transfer.pst -TargetRootFolder "Inbox" -includefolder "Transferfolder" -verbose

Export scenarios from XI and import them into PI

Dear experts
We are planning to upgrade our exitsting XI 3.0 to PI7.0.
Due to system requeriments, we need to install PI on new hardware and migrate all the existing scenario's from XI 3.0 PI7.'0
How to migrate the existing ABAP developements from XI to PI ?
It's possible to export scenarios from XI and import them into PI?
Thanks, in advance
Carme

Hi,
you should go to PI 7.1 and not PI 7.0 otherwise it makes not so much sense.
And yes it's possible to migrate your scenarios. If you have UDFs you have to check them because the java version has changed.
Regards
Patrick

Export from Apex 3.2 and import to Apex 4.0

I apologize if this has been asked before (and I am sure it has).
We are about to move all our Apex/Oracle apps to a server where Apex 4.0 is installed. Our current Apex version is 3.2. My question is can we export from Apex 3.2 and import in Apex 4.0 and expect everything to work (assuming it all works fine in Apex 3.2 and all Oracle objects were moved properly to the new server , both servers have Oracle 11g).

I am having trouble finding "update application" under any of the utilities.
Also one of my applications gives me the following error when I try to import it from Apex 3.2. to 4.0
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-02290: check constraint (APEX_040000.WWV_FLOW_WS_RPT_CHART_AGG_CK) violated <pre>begin wwv_flow_api.create_worksheet_rpt( p_id =&gt; 24053127534342788+wwv_flow_api.g_id_offset, p_flow_id=&gt; wwv_flow.g_flow_id, p_page_id=&gt; 60, p_worksheet_id =&gt; 24052412232342516+wwv_flow_api.g_id_offset, p_session_id =&gt; null, p_base_report_id =&gt; null+wwv_flow_api.g_id_offset,
I have no clue how to fix that.
George

Help export from database P1 Partition and Import into databaseT1 Partiton

Hi,
I need to export one of the table partition(Range Partition) data from production database P1, and Import into another table partition of database T1.
Means export from one partiton to another partition, from database is P1, To database is T1.
exp command not worked in sqlplus prompt at SQL>.
Regards,
Venkat.

Hello,
I don't know exactly your Oracle release, but since Oracle 10.1 you can use either the Original export/import utility (exp/imp) or the DATAPUMP (expdp/impdp) which is recommended.
As previously posted, export/import is not launched from SQL prompt but straightly from a DOS session (for Windows) or a Unix session (on Unix/Linux).
These links will give you example about partition-level export and import, using the Original export/import utility:
http://download.oracle.com/docs/cd/E11882_01/server.112/e16536/original_export.htm#SUTIL2750
http://download.oracle.com/docs/cd/E11882_01/server.112/e16536/original_import.htm#SUTIL1758
You have the same feature in DATAPUMP with the TABLES parameter:
http://download.oracle.com/docs/cd/E11882_01/server.112/e16536/dp_export.htm#i1006816
Hope this help.
Best regards,
Jean-Valentin

Hello i need a help about script to export translatable text strings from ai files and import them back

Hello i need a help about script to export translatable text strings from ai files and import them back after editing, thanks in advance

Lanny -
Thank you for taking the time to help with this problem. Can I just say however that as someone who has posted a first comment here and quite clearly never used a forum like this before, your comment unfortunately comes across as very excluding. It makes me feel there are a set of unwritten rules that I should know, and that I don't know them shows that the forum is not for me. In short, it's exactly the kind of response that stops people like me using forums like this.
I'm sure it's not intended to be received like this and I am sure that the way you have responded is quite normal in the rules of a forum like this. However, it is not normal for those of us who aren't familiar with forums and who only encounter them when they have a genuine problem. This is why I hope it is helpful to respond in full.
The reason I posted here is as follows. I was directed here by the apple support website. The original comment seemed to be the only one I could find which referred to my issue. As there is no obvious guidance on how to post on a forum like this it seemed perfectly reasonable to try and join in a conversation which might solve more than one problem at once.
Bee's reply however is both helpful and warm. This could in fact be a template for how new members should be welcomed and inducted into the rules of the forum in a friendly and inclusive way. Thank you very much indeed Bee!

I am reformatting and rebuilding my Win 7 computer. How do I export all the settings from iTunes so I can import them into my new install?

I need to rebuild my computer which has iTunes synced with my iPhone and iPad. How do I export all the settings from iTunes so I can import them into the new install and not have to go through all the setup again? My music library is my own and on a NAS drive so not going to lose it. I am mainly concerned about setup parameters. Thank you for any assistance.

There's nothing to export.
The iTunesLibrary.itl file contains all the settings, playlists, and playcounts.
Copy or backup all your important files including the ENTIRE iTunes folder, then restore all your data including the ENTIRE iTunes folder once the system is formatted and rebuilt/reloaded.

Export an animation from edge cheer up and when I get moment to muse that had the old animation anteriomente and just let me see the new animation when it in your browser

export an animation from edge cheer up and when I get moment to muse that had the old animation anteriomente and just let me see the new animation when it in your browser

Hi
Could you please elaborate your query and provide us with more details on the issue you facing?

Any value in exporting iPhoto pictures and importing them into Aperture?

I am moving from iPhoto into Aperture (moving my library again actually) and I know that iPhoto and Aperture can share the iPhoto library once it has been updated but I am wondering if there is any value (or even if it is possible) to export all of the iPhoto pictures and import them into a new Aperture library? The reason that I'm asking this is that I know there are a lot of duplicates in my iPhoto library and I know that Aperture keeps only the original. A couple of weeks ago I moved my iPhoto library onto an external LaCie SSD disk to use with my MacBook Pro but unfortunately corrupted that library and have to make the move again. If there is any value in changing how I'm managing my library I should do it now.
The library corruption was caused by me needing to leave for work and disconnecting the LaCie before Aperture was done sync'ing with my Flickr account. When I tried to use Aperture the next day it was not able to repair/rebuild or use the iPhoto library at all. I was unfortunately not backing up the external disk so I lost everything that I had done to clean up the library after the move. One lesson that I learned was do not automatically sync with Flickr because doing this on an MBP via wireless with an external disk library can add a lot of delay to shutting down Aperture after an MBP wakeup.

Just in case you have not come across these:
Aperture 3.3: Using a unified photo library with iPhoto and Aperture
Aperture 3.3: How to use Aperture to merge iPhoto libraries
but I am wondering if there is any value (or even if it is possible) to export all of the iPhoto pictures and import them into a new Aperture library?
You can - an it will depend on what you want to achieve, if that will usefull. The way to do this would be by imprting your iPhoto library into an Aperture library using Aperture. But Aperture libraries and iPhoto libraries are now interchangable - both are photo libraries, and you could simply use your iPhoto library in Aperture and be done now.
Some reasons why you would want to turn your iPhoto library into a library recognized as Aperture library by importing it into a new, empty Aperture Library:
As long as the photo library will have the "Kind: iPhoto library", you will have to upgrade both iPhoto and Aperture always to the newest versions, or you will not be able to upgrade to a new library format, when a new release of Aperture comes - say (iPhoto '12 and Aperture 4); you will probably have to buy both new releases to continue working with your iPhoto Library in Aperture.
If the kind of your library is "Kind: iPhoto library", it will appear in the Media Browser in the iPhoto section, not in the Aperture section, even if you are using it as your Aperture library. And before syncing with iTunes you will always have to open the Aperture library in iPhoto to point iTunes to it.
Also, in Aperture you have more control about what will be included in your library - In iPhoto there is no way to specify the size and quality of previews. If you do not want or need previews, or you want smaller previews, or no Faces, it would make sense to recreate your iPhoto library by importing it into a new, empty Aperture Library.
If you have more than one iPhoto Library, you can merge them into one big Aperture library to be able to browse all your images without having to switch between libraries. Aperture works very well with really big libraries. There is no need to split libraries.
The reason that I'm asking this is that I know there are a lot of duplicates in my iPhoto library and I know that Aperture keeps only the original.
That is what I meant by having more control on what will be stored. iPhoto will always store a very high quality preview of your edited version; in Aperture you can decide what the preview size and quality will be. But Previews and originals are not duplicates; they are not the same image.
Regards
Léonie

How do i expoert files from Outlook and import them into iphone? operate with Mac OSx at home and trying to convert contacts and calendars from work and carrying on iphone. txs

How do I export calendar and contact files in Outlook and import them into iphone 4. I operate Mac OS X at home and wish to carry my work information with me on my iPhone.

You do not export anything.
Instead, sync the content from Outlook to your device via iTunes.
Try reading the manual, it's included on the device or here.

How can i take the pictures from my old ipod and transfer them onto my computer without deleting anything

How can I take the pics from my old ipod and transfer them onto my computer without deleting anything?

Pictures on an iPod are stored in a special format, optimized for the iPod's small lower resolution screen, to save storage space. iTunes puts them into that format when syncing. There is setting in iTunes, on the iPod's Photos screen (where you set up syncing of photos) for Include full resolution photos. If that checkbox was checked when you synced the photos to the iPod, THEN you can Enable disk use and find those photo files on the iPod in the Photos folder.
Otherwise, you cannot get your photos back, using iTunes. There may be third-party utilities that can extract individual photos from the iPod, but they will still be lower-resolution versions of the original photo.

I got some books from the itunes store and put them into my library. I created a playlist so that I could burn them to cds. The title is there but no contents. It won't even play the playlist. How do I get the contents of the book?

I got some books from the itunes store and put them into my library. I created a playlist so that I could burn them to cds. It won't even play the book, there are no contents. How do I get the contents of the book?

I'm guessing this is a problem unique to me as there have been no replies at all... Thanks a bunch folks

Export BR's from 9.3.1 and import them to 11.1.2.2

Similar Messages

Maybe you are looking for