Export Business Process in India Scenarios

Hi ASAP,
Can any ASAP guru gives me the Export Business Process in India Scenarios including ARE Doc. transaction.
With Regards & Thanks
Manoj Kumar

Dear ASAP,
The information which is given in CIN En Help, I am not able to understand, If you can give me the Process Flow as like given below for both Bonded and Un-Boned with ARE doc. creation, it will be much more help.
Process Flow for Standard Outgoing Mat. with Excise.
       1.    creates a sales order,
       2.   creates a delivery,and post  the goods issue.
       3.   create commercial invoice with ref. of the delivery
       4.   Creates an excise invoice from the invoice.
With Worm Reagrds
Manoj

Similar Messages

  • How to export Business process and application area from Backend.

    Hi ,
    I am new to SAP. I want to export Business process, sub business process, and application area from backend SAP system to my desktop in the excel or flat file format. How can I do this ?? what are the transactions to do this ?.
    Thanks in advance for Reply

    Hi,
    You can deactivate the business process itself if you do not want at all. So that the header will not available for the entity.
    Regards,
    Priya

  • Separation of business processes in IDoc scenarios

    Hello!
    We have implemented an IDoc -> XI -> IDoc scenario with complex mappings and enhanced receiver determination using the value mapping API in which about 15 different R/3 platforms send IDocs to XI for internal ordering.
    All R/3s are using standard IDoc types like DELFOR.DELFOR02, DESADV.DELVRY03, ORDCHG.ORDERS05, ORDERS.ORDERS05 and ORDRSP.ORDERS05. As XI gets more and more used additional projects are coming up in which we will also use exactly the same IDoc types.
    Especially when using enhanced receiver determination it now gets extremely difficult to separate the different business processes once they use the same IDoc types. The projects do not only share the same receiver determination object but what is even worse they also share the same message mapping object to determine the receiver. This makes development, testing and MTP extremely difficult and requires coordination over several project teams.
    Within R/3 business scenarios can easily be separated using different message codes and message functions. However, once the R/3 post IDocs to XI there is no clear separation possible any more.
    Of course, every project can implement own Java classes for enhanced receiver determination and transport the archives separately but still the problem is that all the projects using the same IDoc message type share the same message mapping object to the determine the receiver. This means that it would be necessary to fill the input parameters for the enhanced receiver determination classes of ALL projects within the same object. Either by putting logic in the graphical mapping or writing another Java function to call the different Java classes for enhanced receiver determination based on the message code and message function.
    From a design perspective it is no good approach to mingle logic for different projects and business scenarios in the same development objects. What alternatives do we have? Does SAP plan to support a separation using message code and message function for IDoc scenarios in the Integration Repository?
    Regards, Tanja

    Hello!
    Does nobody have any comments on this?
    Regards, Tanja

  • Roles for Business Process Monitoring

    Hi Expert,
    I'm working with sap solution manager and Business Process Monitoring.
    It works fine but I need to create particular roles for my users.
    I have created one solution with 2 business scenarios (scenario 1, scenario 2) and 10 Business Processes for each scenario.
    I would know if exist a role in order to allow user 1 to see only BP in  scenario 1 and allow user 2 to see only BP in  scenario 2.
    I saw roles: SAP_OP_DSWP_BPM and SAP_SMWORK_BPM but I didn't find any suitable authorization object to use.
    Thanks for collaboration
    best regards
    gio'

    Hi Giovanni,
    the answer is unfortunately no. There is no authorization object available that limits the visibility of business processes. You could only split by solution, so creating two solutions each containing 10 business processes.
    In general you can find information about roles and authorizations in SAP note 834534. There are several MS Excel files attached to this note.
    Best Regards
    Volker

  • Business Process Performance Tuning

    Hi Pals,
    I would like to request your help and inputs regarding tuning performance of Business process for my scenario.
    I have created a synchronous Process with 3 message mapping transformation steps. ( inbetween Sync Receive and Sync Send steps). So its pretty simple process.
    I am able to execute only 3500 processes per hour.
    The SAP Netweaver Server m/c configuration is 2 dual core processors with 12 GB RAM.
    Business process - Without buffering with multiple queues (content specific).
    IE Logging - No sync logging, logging level - 0 ( so logging turned off )
    I have tried out all the configurations mentioned in below weblogs, but with very less improvement in my case.
    Performance Tuning Checks in SAP Exchange Infrastructure(XI): Part-III
    Performance Tuning Checks in SAP Exchange Infrastructure(XI): Part-II
    Performance Tuning Checks in SAP Exchange Infrastructure
    I think something else is choking the execution, as the CPU or memory usage is not more than 10-20%.
    Please pour in your inputs.
    Thank you!
    Best Regards,
    Saravanan N

    Thank you very much Bhavesh!
    In my BPM, all the steps are set for "No New Transaction". So as to avoid any performance issue. But there is no  improvement.
    Even I have deleted all the work-items from Trxn: SWWL before the test.
    From ST03N, for each process instance executed, four function modules takes the maximum time.
    Function Module--No. of Calls--
    Execution Time/RFC Call
    TRFC_QIN_DEST_SHIP-- 1--
    995 milliseconds
    TRFC_QIN_ACTIVATE--1--
    1077 milliseconds
    ARFC_DEST_SHIP--2--
    280 milliseconds
    ARFC_RUN_NOWAIT--2--
    402 milliseconds
    Best Regards,
    Saravanan N

  • Faced lot of interviews about business process..........

    Hi SAP Helpers,
    I faced many of interviews about business process but i am not able to explain in correct way. could you pl tell me how to explain about business process.
    Examples:
    scenario-1: business is running in service sector like dealing in courier & cargo service
    scenario-2: business is running in manufacturing sector like manufacturing fans & selling the same
    Please send me your valuable suggestions/advices and hopefully, i can get very good answers  for these 2 scenarios and sure will assign points
    regards
    venkat

    Hi hemanth
    You have to say how many cateogaries of employees are there in your work schedule how many work schedules are there what are different gardes they have and how many ee subgroups are there what are the different procedures for the employee like hiring, termination, leaving like in few co they expats and impats and so on and so forth
    you can say like this
    bye
    Naveen

  • Exporting Design steps of Business Process Components from QC to excel using macro

    I want to export design steps from Business Process Components from QC to excel using macro. CAn anyone please help me with that.
    Thnx, Sanket

    Post Author: swat
    CA Forum: Exporting
    Hi,
    Of what i gather from ur scenario...this is what i did in one of my reports.
    I had to use two subreports and they had to occupy one cell each, in line with other fields.
    To obtain that,all the fields required in the subreport i put them into a text box.Therein restricting the fields to the txt box only...
    Then import that sub-report as it is.
    It worked for me....
    try out...
    All this only if've understood u right...

  • Transform from Business Process Expert to Value Scenario Experts !!!!

    Hi Business Process Experts,
    Its time to think ahead for all of us to be in line with SAP Business Suite 7.0
    SAP Business Suite 7:
    Establish Process Excellence, Lower Costs, And Capture Opportunities
    SAP Business Suite software provides best industry practices with industry-specific applications and the core applications of SAP Business Suite:
    SAP Customer Relationship Management
    SAP ERP (enterprise resource planning)
    SAP Product Lifecycle Management
    SAP Supply Chain Management
    SAP Supplier Relationship Management
    No more stovepipes -> Flexible end-to-end processes
    Deploy as you go -> Stepwise projects and installation
    No more upgrades -> Enhancement package = innovation packages
    Dynamic -> Re-usable enterprise services
    Industry-focused -> Delivers integrated industry solutions
    Extensible -> Easy expansion beyond ERP
    Choose Which Value Theme belongs to your current Business Process ??
    7 power packed themes and value scenarios:
    (1) High Performance Assets
    -Ready to Run (Efficient Design / Build / Commission)
    -Manage by Exception (Visibility and Optimization)
    -Run the Asset (Maximum Uptime)
    -Intangible Property Management
    -Stay Safe (Keep in Compliance)
    (2) Operational Excellence
    -Lean Manufacturing
    -Integrated Sourcing and Procurement
    -Integrated Logistics
    -Efficient After-Sales Service
    -Continuous Performance Improvement
    (3) Product and Service Leadership
    -Continuous Product Innovation
    -Integrated Product Development
    -Embedded Product Compliance
    -Product Delivered as a Service
    (4) Responsive Supply Networks
    -Collaborative Demand and Supply Planning
    -Manufacturing Network Planning and Execution
    -Logistics and Fulfillment Management
    -Characteristic based planning and execution
    -Service Parts Management
    -Supplier Network Management
    (5) Superior Customer Value-Optimize Sales and Marketing Investments
    -Creating the Optimal Offer
    -Seamless Order Fulfillment
    -Differentiate though Service Excellence
    -Customer Centric Marketing
    -Accelerated Lead to Cash
    (6) Financial Excellence-Gain Efficiency in Finance
    -Optimize Working Capital
    -Drive Strategy and Growth
    -Manage Risk and Compliance
    (7) Best People and Talent-Building the Workforce
    -High Performing Organization
    -Sales Force Performance
    -Compliant Workforce

    "Transform from Business Process Expert to Value Scenario Experts !!!!"

  • Two way Asynchronous business process for Webservice to JDBC scenario

    Hi Experts,
    For the webservice to JDBC scenario, I have to use two way Asynchronous business process. Is it possible?
    Scenario : Webservice to JDBC -> Async Call
    JDBC to Webservice -> Async Call
    I have already done with two way Synchronous. Here I would like to know about only Async call. Please provide your suggestions.
    Is it recommended to use Async call when we have Synchronous option?
    For the above requirement I have to create two separate services and in BPM, I have to call one by one..Is it correct?
    Regards
    Sara
    Edited by: Sara D on Dec 18, 2007 8:05 AM

    hi sara,
    yes it is possible.
    In receiver channel JDBC we have a special parameter "Exactly Once Handling " which is to assure async incoming data to be written only once to avoid redundancy.
    Although Synchronous is "Best Effort" but it is considered to be "Worst Case". We can use Sync but try to use Async as much as possible to ensure system performance.
    Ques : For the above requirement I have to create two separate services and in BPM, I have to call one by one..Is it correct?
    yup you have to create two services and you are following right path but this scenario should be in two steps seperately.
    Rergards,
    Mandeep Virk

  • Business Process Scenario

    Hello everyone,
    Do we have anyone here who has done Business Process Validation in SAP SD and also assisted SQA team to assist them in validating process design documents.
    The objective is to verify that requirements no matter functional or technical are completely covered and the process document supports complete solution and validate that process document supports software test plan.
    Please share your experience or share with me how would you handle this?

    Hi,
    business scenarios (including key things to be touched - like business areas, company codes, doc types, interfaces, etc. Then build test cases using elements from the list -- pulling in multiple items from the list where it make sense). Not every test would necessarily include all the same elements. Each test case would be assigned a number or code -- and that wold be tracked on the basic business scenario list. Also found it valuable to include business users in development of theese test docs wherever possible.
    Apart from that, the testing are at different level, such as Unit Testing - which will test only the functionality of particular process say creating PO. All errors may not come into knowledge at this point. Integration testing - which will test the entire process along with inegration within SAP and with interfaces. Here there are chances that additional problem area are identified and required to be fixed.
    The process followed by me for testing Business Scenario for Order to Cash Cycle is demonstrated below"
    Initial Testing will be as under:
    1. Create Stock artificially (in test server / sand box only)
    2. Create Sales Order
    --> Here the common expected error would be as under:
    a. Sales Order Type not assigned to Sales area
    b. Pricing Procedure assignment not done.
    c. Pricing Condition record not maintained
    d. Material not maintained or extended to relevant combination
    On successful creation of Sales Order, next step would be to create Delivery.
    3. Create Delivery and PGI
    I will test this scenario in multiple manner
    a. Create Delivery from Sales Order
    b. Create Delivery through Transaction Code VL01N
    c. Create Delivery through Transaction Code VL10C
    --> Here the common expected error is copy control setting not maintained, defalult Delivery type not maintained accurately in sales Order Type, etc.
    On successful creation creation of Delivery, assuing Picking is done appropriately, doing PGI.
    Here the challenge is the Account determination setting reguires to be completed, without which in most cases, it will not allow to do PGI.
    4. Create Billing
    I will test this scenario in multiple manner
    a. Create Billing through VF01
    b. Create Billing through Transaction Code VF04
    Here the challenge is the Account determination may not be complete and Billing Document is saved without creating accounting document.
    In Integration Testing:
    1. Assure that material stock is availble in unrestricted stock through MM/PP.
    2. Creating Sales Order smoothly
    3. Creating Delivery, picking and PGI smmothly.
    4. Create Billing smoothly with creation of accurate accounting document
    Troubleshooting the errors encountered.
    Here the objective is that the process should execute seamlessly.
    similar exercise is done for other processes like Stock Transfer, Third Party & so on........
    Thanks
    Mk

  • High-level business process scenario

    Hi all, I have a business process scenario for which CRM and ECC has to be used. The scenario is like this:
    There are 2 subsidiaries of a company - A and B, which are into trading of materials.
    Between A and customer there is sales agreement. Between B and vendor there is purchase agreement.
    Whenever customer requires materials, it will send request to A. So, A creates a sales order. B in turn sends a request to vendor for which a purchase order is created. The vendor ships the goods directly to customer. The vendor bills B for the purchase order. B adds some margin and then it goes for inter-company settlement with A. A bills the customer for the materials. In this entire process, both A and B earns profit through margins.
    It has to be noted that CRM has to be used as contact point with customer.
    Now I have the following questions:
    1. How would the high-level business design be like?
    2. How would be the document flow?
    3. How can inter-company settlement and billing be done?
    All constructive comments and feedback will be rewarded.

    Hello Animesh,
    Can you please let me know the solution you found for the intercompany business process. I have the similar kind process which needs to be configured in CRM7.
    Thanks a lot
    Lingaiah Manne

  • High-level design for business process scenario

    Hi all, I have a business process scenario for which CRM and ECC has to be used. The scenario is like this:
    There are 2 subsidiaries of a company - A and B, which are into trading of materials.
    Between A and customer there is sales agreement. Between B and vendor there is purchase agreement.
    Whenever customer requires materials, it will send request to A. So, A creates a sales order. B in turn sends a request to vendor for which a purchase order is created. The vendor ships the goods directly to customer. The vendor bills B for the purchase order. B adds some margin and then it goes for inter-company settlement with A. A bills the customer for the materials. In this entire process, both A and B earns profit through margins.
    It has to be noted that CRM has to be used as contact point with customer.
    Now I have the following questions:
    1. How would the high-level business design be like?
    2. How would be the document flow?
    3. How can inter-company settlement and billing be done?
    All constructive comments and feedback will be rewarded.

    Hi Animesh,
    The thumb rule to CRM process designing is stick to customer process...
    Thus u jst hav to stick to process design of company A and its interaction with Customer.
    We are not concerned with how the material will be purchansed,but we are concerned with how we will be delivering it to end customer.
    Thus, once customer place an order to company A, our process would suggest a sales order for the customer with one of the partner function "Vendor" as B with the required material. Now later process in R/3 would convert this sales order with customer as soldtoparty to purchase order with vendor as B and one of the secondary partner soldto party as our original customer.
    And billing would happen the way it is... ie. based on sales order.. thus u will have some inflow.. again u will be raising a purchase requisition to company B thus that would be your outflow..
    That was a really good scenario to think about.
    Best Regards,
    Pratik Patel
    <b>
    Reward with Points!</b>

  • Strategy Management Business Process Scenarios in English language

    Hi,
    Can anybody (in  SAP organisation itself , hopefully) help in providing the English version of the file Strategy Management Business Process Scenarios (DE)?
    This file is currently available in German only at the service marketplace under SSM 7.5.
    Thanks.
    With regards,
    Milan.

    Milan,
    The reason that the German version was on the Service Marketplace is because it is currently in production and not available until October.
    I was able to go to implementationcontent.sap.com/bpr
    - Clicked on SAP BusinessObjects Strategy Management
    - Click Strategy Execution
    - Click Strategy Management 7.5
    - Click BUSINESS PROCESSES
    - New window opens with Scenario "Strategy Validation"
    - On the Documentation Tab you should see "Display Document"
    - Clicking on Display Document opens a new window with the doc
    The difficulty with being internal, is that I may have different authorization levels than you and so can't guarantee that this will work for you, but it is there right now in English. And I should mention that it took a long time for the new window with Document Tab to open, again your experience may be different, but be patient.
    Regards,
    Bob
    Edited by: Bob McGlynn on Sep 24, 2009 7:23 AM
    Edited by: Bob McGlynn on Sep 24, 2009 7:50 AM

  • Business Scenario and Business Process in IR

    Business Scenario vs Business Process in IR???
    Pls give the example for BPEL???

    Business Scenario - it is nothing but how the business is done in a particular scenario. It mainly is documented in your Functional Spec.
    Integration Scenario - http://help.sap.com/saphelp_nw04/helpdata/en/88/7adb7a030b424b8ef29b99461e52a8/content.htm
    /people/venkat.donela/blog/2006/02/17/companion-guide-to-integration-scenario
    /people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi
    Integration Process / BPM -
    http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm

  • How do you differentiate business process and business scenario

    how do you differentiate business process and business scenario???
    pls help

    Google says;
    A <b>business scenario</b> is a description of a business problem, which enables requirements to be viewed in relation to one another in the context of the overall problem. Without such a description to serve as context, the business value of solving the problem is unclear; the relevance of potential solutions is unclear and there is a danger of the solution being based on an inadequate set of requirements. A key factor in the success of any other major project is the extent to which it is linked to business requirements, and demonstrably supporting and enabling the enterprise to achieve its business objectives. Business scenarios are an important technique to help identify and understand business needs.
    A business process -
    http://en.wikipedia.org/wiki/Business_process

Maybe you are looking for