Export by SCC8

Hello ,
I installed a new SAP R3 Enterprise server with a new instance ID K21
I want to do an export / import by TX SCC8 from another server K20 but all specific object tables customizing and data is not exportable
How to do please
Best regards
STH

Hi,
The profiles is SAP_ALL
And many table does not exist like :
Table /COCKPIT/CADDCHK does not exist in nametab
Table /COCKPIT/CARCHIV does not exist in nametab
Table /COCKPIT/CARCOBJ does not exist in nametab
Table /COCKPIT/CBUTN does not exist in nametab
Table /COCKPIT/CCPDDAT does not exist in nametab
Table /COCKPIT/CCPDVNO does not exist in nametab
Table /COCKPIT/CFRDETA does not exist in nametab
Table /COCKPIT/CFSTATE does not exist in nametab
Table /COCKPIT/CNOTES does not exist in nametab
Table /COCKPIT/CPICDIS does not exist in nametab
Table /COCKPIT/CPOFIND does not exist in nametab
Best Regards

Similar Messages

InfoUser Master Data Export using scc8

Hi Team,
Iam doing User Master Data Export using scc8 .I have 1 question regarding this:
1)When i took export using scc8 only 1 TR is created in cofiles folder and i cant see that TR in data-files folder.
Can anybody help me in this??
More info:
We are going to rebuild the system so we need to preserve the user master record data.
Regards,
Abhilash
Edited by: gundala$ on Feb 29, 2012 8:10 AM
Edited by: gundala$ on Feb 29, 2012 8:10 AM

Hi,
Kindly go through the following link.
http://forums.sdn.sap.com/thread.jspa?threadID=1310350
Anil

Problem in client export and import (SCC8)

Hi,
I was asked to copy client 300 data on one AIX server to client 210 on another AIX server.
I have done the client export thru SCC8,
transferred those files to other server thru ftp,
added those requests to the import queue on target server.
As and when the request is added to the import queue, the status is being shown in red. Is there a problem with this.
And when i imported the request it got cancelled and the message in log says
the data file is damaged,but the other request(HPRKX00006) is still running.
It has taken a lot of time,so we deleted the data and cofiles related to the requests
and retransported them from source machine.
Even after that the status of the request is shown in red when added to the import queue, and dosent allow to import because the subsequent request is still running
and gives an error saying the request HPRKX00006 is still running.
Suggest a suitable solution.
pradeep.

Hi,
Is your problem solved. Currently I am facing the same issue.
Please let me know what have you done if the issue is resolved.
Regards
Sharath

User Master Records/Tables - Exporting User tables for Recovery

Hi there,
Work in the Security area ....Outside of the client export of SCC8 for user master records/roles. Is there another recommended method for saving user tables that can be re-imported on the chance of deletion of users and roles and can be selectively re-imported if needed. For instance if a particular User Grouip was deleted with X number of users, could that be re-imported by a selective means ? SU10 is handled delicately in prod when used but unwanted results still occur. Approaches appreciated ..

Hi,
Try the following..
BAPI_USER_CREATE Create a User
BAPI_USER_CREATE1 Create a User
Hope that helps!
Regards,
Tanveer
<b>Please mark helpful answers</b>

Client export

hello experts,
when client exported from scc8 the request created with 1.89 gb in data folder but now client size is increase so i am exports client with filesplit option but it create more no of request with 2 gb in size what is the difference between normal exporting and exporting with filesplit request.
fillesplit=2000000000
thansk

Hi,
there are no diffenreces other then creating multiple files if it gets bigger than 2GB.
so, in your case, it looks like the source client has grown a lot since the last export.

Client export terminates DBIF_PGNT_UNEXPECTED_CODE

Hi Gurus,
I have encountered with an Dump DBIF_PGNT_UNEXPECTED_CODE while Client Export through SCC8. When checked with File log of Client copy it displays the following in performance assistant .
Customizing has created tables in other clients which only contain data from this client
I am Using SAP_EXPA profile for Client export to Production Client. FYI Customizing and test Client are in the same box. Support pack level are same in both DEV and PRD boxes.
Could you please advise.
Thanks
Anil

Hi
We never achieved this error, hope the belowed ones will help u.
The error indicates the database interface error, the table is unable to retrieve from the database, does any users are accessing the source system.
while retriving the table, the procedure may failed.
These might be the expectations.
Regards
Bhaskar

Client export request will not be imported

Hi,
I have run a client export via SCC8. In the transport log there is 1 error and the message 'EETP200 export with errors, request will not be imported'. Status is 12.
I have checked the log and the failure was due to a rollback segment not being large enough.
As the export took 22 hours to run and only 1 table failed out of approx 8000 is there any way that I can import the transport and then export the failed table again or do I have to increase the rollback segment and run the entire export again?
I've checked OSS and can't find anything on this.
Thanks - Janet

you can use program R3TRANS to export that one file.
SAP note 120906 does a similar job for multiple tables. have a look.

Restarting Client export which ended with return code 8.

Hi guys,
I have performed an client export using SCC8 and the export ended with return code 8. stating the request cannot be imported. I have fixed the errors. I would like to know how do i restart the same export instead of doing a other client export. KIndly let me know as early as possible as it is very urgent.
Naresh

Hi ,
Thanks for the reply, One of my colligue is telling no need of transport elements under the query. why means we copied (dev) one of our query and just changed the Variable to curent fiscalyear/period. now we to transport this query. My colligue is telling any way thos elements are there in old query , and telling no need to transport those. Is it correct or again we need to collect all those using elements in that query while transporting ?
we dont have access for SE03.
Thanks & Regards
Pcrao.

Customization copy from ECC Prod to Dev

Hi gurus,
There is a complaint from our BI team that so much of customization was directly made in QA in the early phases of the SAP Implementation Project and this was not re-developed in DEV and moved to QA and Production. This has resulted in loss of customization in development and is not suitable for Unit and Product testing.
To put Prod and Dev in sync with customizing, I propose to export Prod / QA client 100 (with SAP_CUST profile) and import into DEV client 100. What are your views on
the best practices
technical feasibility
client security implications
Thanks for your help.
Regards,
Abdul

> the best practices
Read :
Remote client copy:
http://help.sap.com/saphelp_erp2005vp/helpdata/EN/69/c24c684ba111d189750000e8322d00/frameset.htm
Also, you can think about the option of client export/import (SCC8)
http://help.sap.com/saphelp_erp2005vp/helpdata/EN/69/c24c824ba111d189750000e8322d00/frameset.htm
> technical feasibility
The same product is installed, with the same release, in both systems.
All components in these systems, including add-ons, have the same development status.
> client security implications
SAP_CUST only copy customizing data. so, there is no risk of misusing production data as in case of system refresh.
Regards,
Jazz

New sap user creation

Hi All SAP experts,
My company has implemented 2 Systems SAP Landscape with one development and one production server which are running on R/3 Enterprise 4.7 (Kernel Release 6.20) with Microsoft SQL 2000 as database server.
I have the following questions regarding new sap user creation by using user copy function.
1.When I request to create new SAP User by using user copy function ,should I just create the user acct in DEV and transport it to PROD System? If yes, how could I do that?
2.When I request to create new SAP User by using user copy function, can I just create it on PROD System only? If yes, what is the impact?
3.When using User copy function to create new user acct, should I select all parts (like adress ,defaults,reference user, user groups.....) of the existing user to be cloned to new user acct?
Thanks.
Leon

Hi Leon,
Answer to your questions in their respective order:
1. You can create user in DEV and then make remote client copy to PRD system using scc9 t-code. Here you can choose user accounts and authorizations for the copy. ( Rem: Data will be overwritten in target system when copied).
You can also use client export/import(scc8/scc7)
But, When you do the client import from the exported files using STMS,you will have to select only one of the transport requests and then STMS automatically selects the other requests for you.
Then it will show you the different transport requests that you have created during your export, the client copy profile and the target system and client. The customizing and application data is deleted in the target client before copying for all profiles except SAP_USER. This is technically unavoidable (and hence the data will be overwritten).
So if you can afford overwritting of user data in target client , you can go with the above procedure.
2. Using user copy in su01, you can copy one user to another user only in that client and is confined to that system only. So yes, If you want 2 or more users to have same authorizations, profiles ,etc etc.. you can choose this in PROD system.
3. It depends.. If you want user to be in same group, then you can choose user groups. If you want them to have same authorizations , you can choose roles and profiles... If you want them to have same company address and others,... you can select address.. and so on.
Also below link provides required steps in case you choose local/ remote client copy:
http://www.sap-basis-abap.com/bc/client-copy-by-using-scc8-and-scc7.htm
Hope this helps...
Thanks,
Ajith
Edited by: Ajith Kamath on Oct 20, 2009 8:28 AM

How to view the progress of an Clientimport via R3TRANS

Hi together,
how can I view the progress of an Import of an Clienttransport.
I have done an Client Export via SCC8. This transaction had created about 40 files with 2GB size. Now I am Importing this files with STMS. This transport requests are now importing for many hours. The Import status is "Import running". Now I want to check the progress of this import, but I have no idea, how to do this?
Is it possible?
WRKACTJOB
Current
Opt Subsystem/Job User        Type CPU % Function        Status
       R3TRANS      EQ5OFR      BCI    16,6 PGM-R3TRANS      RUN
best regrads,
Carsten Schulz

Hi Volker,
thanks for this answer. Very good.
The following Displays are in the log:
Display Open Files
Job . . :   R3TRANS        User . . :   EQ508          Number . . . :   808653
Number of open data paths . . . . . . . . . . :      2
Member/
File       Library    Device      Scope       Activation Group
QPRINT     QGPL       *SPOOL      *ACTGRPDFN 17         0000000000000011
ZSYN_AB    R3EQ5DATA ZSYN_AB     *ACTGRPDFN *DFTACTGRP 0000000000000002
Display All Messages
System:   DEEBMHVA
Job . . :   R3TRANS       User . . :   EQ508         Number . . . :   808653
Ownership of object ZSD_ZKMN_T in R3EQ5X0000 type *SQLPKG changed.
So I think, every time, when he changed the ownership, the R3trans begins a new table.
best regards,
Carsten Schulz

Regd: Import Error - STMS

Dear All,
i have done Client Export using SCC8 in Production .
when i am trying to add in the test Client using STMS - Add other Request throwing Error:
" The Cross-Client import is not yet in the Transport Buffer"
is there any problem with STMS Configuration. i am able to send the Request from Dev to QAS to PRD.
2) in Test Server i have created a new client 500. using SAP* can i directly import the Request using STMS or First i have to do Client Copy using SCCL and then i have to import the Request and then Execute SCC7.
Regards
SNB

Shankar,
" The Cross-Client import is not yet in the Transport Buffer"
is there any problem with STMS Configuration. i am able to send the Request from Dev to QAS to PRD.
I understand you have created the Client export in PRD and want to apply in QAS..If STMS is creating problems...apply the transport at OS Level using tp addtobuffer <TransportNo> <SID of QAS> Client=<client no>
and then tp import <TransportNo> <SID of QAS> Client=<client no>
then run SCC7 from SAP...This is how I do if I face problems in STMS...
2) in Test Server i have created a new client 500. using SAP* can i directly import the Request using STMS or First i have to do Client Copy using SCCL and then i have to import the Request and then Execute SCC7.
Which Profile did you select during the Export SAP_ALL? If yes...no need to run any local client copy ...simply import the request and exec SCC7.
If you have selected any other profile except SAP_ALL, then it depends on your requirement.
In short a local client copy is not required if you are doing a client export-import in case you want to use the same profile in both the cases.
Award points if useful.
Cheers!
Bidwan

Only Three Questions !!!

Hi Experts !!
I have three questions, please clarify.
1) At OS level we have two SAP services that are running, first is the SAPOSCOL service and second is SAP<SID>_<Instance_no>
I know what SAPOSCOL do..but what is the role of this second service SAP<SID>_<Instance_no> ?
2) During a client export using scc8, it is said that upto three transport requests can be generated depending on the copy profile selected for export. Now to start this export process we have to schedule a background job and the export process will start asynchronously.
Now my question is how will i know which transport requests are created for this export .....I mean where will i see these created requests and when ( means are these requests created as soon as the background job is scheduled or after the completion of the export process ) ?
3) Suppose I have three application servers( one central and two dialog instance )for an R/3 system (say dev)
Now my question is how will I start or stop these servers....will SAP MMC will be present in all the three application servers and I need to log to each application server and start it OR only the central instance will have the SAP MMC and I can start or stop all the application servers from there ??
Thanks in advance. Points will surely be rewarded.
Mandeep

Hello Mandeep,
Here are the answers
1. SAP_SID_Instance Number service will help you in setting up auto start or manual start of SAP services when Windows comes up.
2. Once you use SCC8 and start the client export you can start monitoring it using SCC3 once the export is completed it will show in SCC3 what all the requests generated. These three Import requests are generated in STMS. You can go and check in import overview for the same import request and start the import of them in respective clients and system.
3. Hey Buddy each of these servers will have MMC on it.
Always you need to shutdown application servers first then CI. Then while starting Start CI then apps.
Thanks & Regards
Vivek

Client export SCC8 - ended with errors

Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan

Hi All,
It is very urgent. Please help!
I'm doing client export a Prod client and will import to a Dev client. I run the export SCC8 in background. The export job (SAP_ALL profile) was completed successfully in SM37. However in SCC3, I received error "End with errors". I drilled down the log then I see the following errors.
Command file......................... PRDKT00024
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
Change documents are not copied
Transport control program tp ended with error code 0008
Transport program tp could not be started (RC= 0)
Program ended with error or warning, return code: F
Runtime (seconds) : 9,222
End of processing: 21:04:45
Could you please let me know if these are errors or they are okay to ignore? The export created a transport file PRDKT00024 about 3GB. I don't see the KX00024 and KO00024.
Is this a successfully export or not? please advise.
thanks,
bichloan

Perform Client import/export SCC8 with different release component between server

Dear All
Isn't possible to perform Client import/export SCC8 with different release component between server.?
Currently the condition of between two system as follows
Source Server : SAP ECC6.0, Component SAP_APPL, release 602 level 16
Target Server : SAP ECC6.0, Component SAP_APPL, release 600 level 24.
This problem happens due we was unable to downgrade the release and patch the latest support pack of SAP_APPL reelease 600.
Thank You, your help is much appreciated.

No..

Export by SCC8

Similar Messages

Maybe you are looking for