Export Calendar File

I'm working on a calendar for a friend on their computer. I was wondering if there was a way for me to export the calendar file, where ever that is, to a format that I can upload to my public iDisk Folder & then import into my iPhoto at home? Hope that makes sense.

Joe:
The only way would be to duplicate your iPhoto library folder, open it with iPhoto (launch with the Option key depressed and select the other library folder when asked) and delete all of the photos that are not in the calendar. This will leave a small iPhoto Library folder that can be uploaded to your iDisk or burned to a CD for transporting to your Mac at home.
Then copy that folder to the desktop and open it with iPhoto as described above. If you need additional photos in the calendar library you can do that with iPhoto Library Manager which will let you select albums or rolls from one library and transfer to another. You'll need the purchased version to do more than 10 at a time.
It's a good way of working on books also, creating a separate library for each. That way when the book is complete and ordered, you can burn that folder to a CD via the Finder for use later if you want to order another copy.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

Similar Messages

  • Exporting CS5 file to PDF causes the document size to enlarge on PDF!

    I need help... FAST! I have a 14-page 4CP calendar that bleeds on three sides. The bleed size is 3/16", per the printer's requirements. When I export the file from InDesign to PDF, the overall page size is increased by exactly 3/16"! I nearly missed this and approved the job for printing. Luckily, I turned on the rulers in the PDF file to double-check all the page elements were properly placed and wouldn't fall on the fold. That's when I discovered that objects that I had placed on a page were extending into the fold and onto the next page. I went back to my InDesign file and found that those elements were properly placed and did not extend into the fold as they were doing in the PDF file. I tried different PPDs, exporting the file with and without printer's marks... all to no avail. I finally printed the file to a Postscript (PS) file and then exported that file to PDF and got it to work. However, I would prefer to avoid that extra step. What is going on? Why is the file enlarging (coincidentally the EXACT same amount that the bleed was set for) and/or what am I doing wrong? Any help would be GREATLY appreciated!

    Are you familiar with bleeds etc?  i.e. have you used them before?  It sounds to me as if you're doing everything mostly right but not realising that Acrobat and Reader (please don't mention Mac Preview) show the size including the bleeds when you choose those options upon export from Indesign.
    Go back and check your document setup.  Page size should be excatly just that, finished page size.  Bleed settings (you might have to tick more options to see them) should be also just that.  Export the PDF, go to 'Marks and bleeds' tick 'Use Document bleed settings' and you're done.  The document will appear bigger.
    oh and use the camera button for screenshots.
    You can see the actual size of the doc by going Advanced > Print Production > Crop Pages and toggling between TrimBox (the size the page will get trimmed to) and CropBox (which includes the bleeds and is what displays).

  • Why do I get "iCal can't read this calendar file. No events have been added to your iCal calendar." when I am trying to sync an Apple Workshop appointment?

    I made a reservation for an Apple store workshop, but when I try to open the download in iCal (Lion) , I keep getting an "iCal cannot read this calendar file." message.  Very frustrating.  Any insights would be appreciated.
    Thanks,
    Bmoregirl

    Greetings,
    What version of the Mac OS and what version of iCal are you running?
    Are you using MobileMe calendars (or any other server based calendars like Google) in your iCal?
    While you answer those questions you can try the following troubleshooting:
    1. First make an iCal backup:  Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
    2. Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    ---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    Once the computer is back up and running open iCal and test.
    Hope that helps.

  • Recovering Calendar files from Time Machine backups in Mavericks

    I have somehow deleted all previous Calendars and entries prior to the day I set up iCloud. They have gone from iCloud also. This occurred after I tried to remove duplicates. Calendar entries after setting up iCloud are more or less OK but everything before that day has gone (except for birthdays and a few other entries).
    Can I recover them from a previous (Mavericks) time-machine backup and if so how please?
    I have looked for calendar files on my external backup HD but can't see anything recognisable.
    Other posts on this topic seem to refer to previous operating systems.

    I used the process outlined here successfuly just now:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudtm.html
    I am running Mavericks. Things I learned or to clarify/amplify what he says (at the URL I just listed):
    * If you have partial data saved in Calendar now, I highly recommend you export and save it as an .ics file so you won't lose anything.
    * Make sure you close Calendar before trying to restore.
    * To restore Calendar files, go back to the date you want to restore in Time Machine, and in your home folder (or whatever you may have renamed it), go to Library > Calendar. Highlight ALL files in this folder. The Restore button should turn white in the bottom right of the Time Machine and hit that. It will move them all into your calendar.
    * Follow his procedure otherwise. When you import the old data into your newly created On My Mac version of your calendar, it will say there is a "new event" or message and ask you where you want to put it. That would be the newly created calendar you just set up chosen off the list. It's pretty obvious but his directions didn't say so I like to be explicit with details.
    * I found that calendars I had created since losing my old ones were not overwritten or lost when I followed the above procedure.

  • "iCal can't read this calendar file. No events have been added to your iCal calendar."

    How do I deal with this error message-"iCal can’t read this calendar file. No events have been added to your iCal calendar." ? .ics vs .vcs?
    Thanks

    Greetings,
    What version of the Mac OS and what version of iCal are you running?
    Are you using MobileMe calendars (or any other server based calendars like Google) in your iCal?
    While you answer those questions you can try the following troubleshooting:
    1. First make an iCal backup:  Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
    2. Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    ---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    Once the computer is back up and running open iCal and test.
    Hope that helps.

  • NWDS 7.0 Error during Quick PAR Upload and while trying Exporting PAR-File

    Hello,
    I am trying to use the functions "Export as PAR-File" and "Quick PAR Upload" in NWDS 7.0.
    Unfortunately I got an error every time when I am trying to use this functions. I am using the package explorer in the Java perspectiv in NWDS for starting this functions. The error tells me the following:
    "Unable to connect to the Portal"
    "Operation failed: Please make sure the server "XY" is running or check the log (sap-plugin.log) for more detail"
    Thats all.
    When I am looking in the log-file I can read the following messages:
    "ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore: view-actions: GET_VIEW:ALL]"
    "ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore: view-actions: IS_VIEW_EXISTS:ALL]"
    "ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore: view-actions: SIZE_OF_VIEW:ALL]"
    "ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore: view-actions: READ_ENTRY:ALL]"
    LOGIN.ERROR|null|| Login Method=[default] UserID=[user_Admin] IP Address=[192.168.xxx] Reason=[Cannot authenticate the user]
    I have tried this with several users and their passwords. All of the users have admin-rights at least in the portal. One of them even in the SDM.
    I can sucessfully deploy webdynpros from NWDS into the same Portal with this users.
    We are using SAP Logon Tickets and SSO is configured working fine between Portal and backend.
    We have imported Key Store File in NWDS unter Window --> Preferences --> Java Development Infrastructure.
    And we are not using the NWDI.
    Who knows why I cannot even export par-files? Are their any configurations missing?
    Best regards,
    Iris

    It is mentioning about authentication.
    check whether you have access to deploy directly or not ? maybe direct deployment into portal disabled .
    I think you have to follow the procedure of checkout and activate procedure.
    Can you clarify few things
    1) Are you using NWDI Based Transports in your landscape?
    Login Method=default UserID=user_Admin IP Address=http://192.168.xxx Reason=Cannot authenticate the user
    http://192.168.xxx  is it your development portal?
    Did you clarify with admin people whether direct deployment disabled?
    Koti Redd

  • Error in exporting photoshop file

    We have several copies of After Effects being used in the office.  Both myself and another user have encountered a problem saving as photoshop layers.  It gets 87% or so into it and then gives the error; "error in exporting photoshop file" in the info window.  Any thoughts?

    I don't think expressions should have any influence on teh matter. They are just another way of formulating an animation stream value just like keyframes. Icould think of a few things:
    - The new pixel aspect ratio handling in CS4. Due to the conversion, something may happen to the source footages.
    - Layer styles. this may cause a "cyclic use" of the Photoshop engine. Some of that stuff has changed quite a bit for CS4 to accomodate Ps Live 3D and teh new adjustment layer model.
    - Hardware accelerated effects. CS4 passes through OpenGL acceleration through all comps. Using an effect that uses it and happens to think it doesn#t need to fall back into software only mode, may cause a hiccup.
    - MediaCore. Similar to the previous, it uses hardware acceleration and may show weird behaviors, varying solely based on differences in graphics cards.
    In particular for the last two points I would think it is what makes the difference between your systems. One of them has not enough juice on OpenGL, so it's "safe". I'd definitely investigate along those lines.
    Mylenium

  • How to import external table, which exist in export dump file.

    My export dump file has one external table. While i stated importing into my developement instance , I am getting the error "ORA-00911: invalid character".
    The original definition of the extenal table is as given below
    CREATE TABLE EXT_TABLE_EV02_PRICEMARTDATA
    EGORDERNUMBER VARCHAR2(255 BYTE),
    EGINVOICENUMBER VARCHAR2(255 BYTE),
    EGLINEITEMNUMBER VARCHAR2(255 BYTE),
    EGUID VARCHAR2(255 BYTE),
    EGBRAND VARCHAR2(255 BYTE),
    EGPRODUCTLINE VARCHAR2(255 BYTE),
    EGPRODUCTGROUP VARCHAR2(255 BYTE),
    EGPRODUCTSUBGROUP VARCHAR2(255 BYTE),
    EGMARKETCLASS VARCHAR2(255 BYTE),
    EGSKU VARCHAR2(255 BYTE),
    EGDISCOUNTGROUP VARCHAR2(255 BYTE),
    EGREGION VARCHAR2(255 BYTE),
    EGAREA VARCHAR2(255 BYTE),
    EGSALESREP VARCHAR2(255 BYTE),
    EGDISTRIBUTORCODE VARCHAR2(255 BYTE),
    EGDISTRIBUTOR VARCHAR2(255 BYTE),
    EGECMTIER VARCHAR2(255 BYTE),
    EGECM VARCHAR2(255 BYTE),
    EGSOLATIER VARCHAR2(255 BYTE),
    EGSOLA VARCHAR2(255 BYTE),
    EGTRANSACTIONTYPE VARCHAR2(255 BYTE),
    EGQUOTENUMBER VARCHAR2(255 BYTE),
    EGACCOUNTTYPE VARCHAR2(255 BYTE),
    EGFINANCIALENTITY VARCHAR2(255 BYTE),
    C25 VARCHAR2(255 BYTE),
    EGFINANCIALENTITYCODE VARCHAR2(255 BYTE),
    C27 VARCHAR2(255 BYTE),
    EGBUYINGGROUP VARCHAR2(255 BYTE),
    QTY NUMBER,
    EGTRXDATE DATE,
    EGLISTPRICE NUMBER,
    EGUOM NUMBER,
    EGUNITLISTPRICE NUMBER,
    EGMULTIPLIER NUMBER,
    EGUNITDISCOUNT NUMBER,
    EGCUSTOMERNETPRICE NUMBER,
    EGFREIGHTOUTBOUNDCHARGES NUMBER,
    EGMINIMUMORDERCHARGES NUMBER,
    EGRESTOCKINGCHARGES NUMBER,
    EGINVOICEPRICE NUMBER,
    EGCOMMISSIONS NUMBER,
    EGCASHDISCOUNTS NUMBER,
    EGBUYINGGROUPREBATES NUMBER,
    EGINCENTIVEREBATES NUMBER,
    EGRETURNS NUMBER,
    EGOTHERCREDITS NUMBER,
    EGCOOP NUMBER,
    EGPOCKETPRICE NUMBER,
    EGFREIGHTCOSTS NUMBER,
    EGJOURNALBILLINGCOSTS NUMBER,
    EGMINIMUMORDERCOSTS NUMBER,
    EGORDERENTRYCOSTS NUMBER,
    EGRESTOCKINGCOSTSWAREHOUSE NUMBER,
    EGRETURNSCOSTADMIN NUMBER,
    EGMATERIALCOSTS NUMBER,
    EGLABORCOSTS NUMBER,
    EGOVERHEADCOSTS NUMBER,
    EGPRICEADMINISTRATIONCOSTS NUMBER,
    EGSHORTPAYMENTCOSTS NUMBER,
    EGTERMCOSTS NUMBER,
    EGPOCKETMARGIN NUMBER,
    EGPOCKETMARGINGP NUMBER,
    EGWEIGHTEDAVEMULTIPLIER NUMBER
    ORGANIZATION EXTERNAL
    ( TYPE ORACLE_LOADER
    DEFAULT DIRECTORY EV02_PRICEMARTDATA_CSV_CON
    ACCESS PARAMETERS
    LOCATION (EV02_PRICEMARTDATA_CSV_CON:'VPA.csv')
    REJECT LIMIT UNLIMITED
    NOPARALLEL
    NOMONITORING;
    While importing , when i seen the log file , it is failing the create the external table. Getting the error "ORA-00911: invalid character".
    Can some one suggest how to import external tables
    Addressing this issue will be highly appriciated.
    Naveen

    Hi Srinath,
    When i observed the create table syntax of external table from import dump log file, it show few lines as below. I could not understand these special characters. And create table definationis failing with special character viz ORA-00911: invalid character
    ACCESS PARAMETERS
    LOCATION (EV02_PRICEMARTDATA_CSV_CON:'VPA.csv').
    I even observed the create table DDL from TOAD. It is same as i mentioned earlier
    Naveen

  • I am trying to export a video I have made in FCP 10.0.8 to Youtube or to a master file and I keep on getting an error -50, or "error exporting master file at frame 20074" Any ideas?

    Having used FCExpress for a while I decided to give FC Pro X a trial, I created my first video with it, exported to youtube and it worked fine.  I am now trying to export my second video to youtube and I get an error -50 which means absolutely nothing.  Not being defeated that easy I tried exporting to a mster file using the H.264 codec and I get an error "exporting master file at frame 20074" - again another useless error.  It takes at least 10 minutes to get to this error after the rendering has started, it gets about 12% in.  Any ideas where to start - I am seriously at the point of giving up with Final Cut Pro X simply on the basis of it being more trouble than its worth - I am just glad I did not pay for it yet...
    Any help would be much appreciated.
    Gerry

    Hi Russ,
    Thanks for your response. I am not an experienced user of FC or other video editing software but if its that hit and miss I think I will go to the trouble of finding some better software - I have a busy enough life as is, I don;t want to get into second guessing what a software problem might be!
    I have just successfully exported my video to a master file using one of the Apple codec options so it looks like it could be to do with the H.264 codec.  I am wondering if Apples Compressor software would solve this problem - the only way to try this it to buy it, there is not trial for the compressor app.  Any ideas?
    Thanks
    Gerry

  • I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. what is the easiest way to do this? i have tried export and import but it didn't seem to work.

    I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. my goal is to store them in an external hard drive so it doesn't use up memory on the mac hard drive. is it possible to copy the specific projects without copying the entire library? what is the easiest way to do this? i have tried export and import but it didn't seem to work.

    What do you not understand?
    You can duplicate the iPhoto library (command - D ) and delete everything except the project and its photos from the copy and move that
    Or
    However the calendar takes very little space - it is simpy database entries - it is the photos in the calendar that take space - and for most people you would wnat to keep those photos in your library
    you can use a photo in 50 calendars and it still is only one photo in your library - as I explained calenders do not exist as such - they are simply database entries telling iPhotop how to display the calendar - they take almost no space at all
    LN

  • Exporting EPS files in InDesign CS3 takes FOREVER!!!

    When exporting a file in InDesign it takes up to 10 minutes per page to export a file in EPS form. I am working on a server, but co-workers are doing the same thing and they do not have the same problem. I have noticed that it seems like the files with links in them take the longest. Meaning... if I have just a text file it will export very quickly like it should, but if it has a linked file it will take anywhere from 3 to 10 minutes to export. Does anyone know what's going on?
    -msa818

    Can you make the problem go away by working off the network? Just because you're the only one having problems doesn't absolutely mean the network isn't the cause of the problems. And because these kinds of problems come up all the time with people who work from a server, the network is the obvious place to look first.
    Ken

  • I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

    I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

    Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
    Contact information Dennis [email protected]
    Previous contact information with your organization (DURIM):
    Dennis - i just finished my audition trial and bought the subscription the 2014 version.
    created by durin in Audition CS5.5, CS6 & CC - View the full discussion 
    DURIM - Okay.  I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
    If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]?  We'll take a look in that logfile and see if it gives us more information about why this is failing now.
    Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro?  If so, do they launch as expected or fail as well?
    I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
    Audition Log- file
    Ticks = 16       C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
    Sent from Windows Mail

  • How do I get iCal in Lion to read my old 10.6 calendar files, notational velocity files

    Hi everyone,
    I recently upgraded from 10.6 to 10.8 and did a clean install. I backed everything up using Time Machine and have chosen to transfer most things manually as there were a lot of applications and system files that I did not want to copy over. However, I've run into an issue when trying to transfer over my files for iCal -- I found the old calendar data in Users/my name/Library/Calendars, and copied it over into the Library file on my new machine. There wasn't a Calendars file yet, so I created it. However, when I open iCal, it doesn't show my old calendars-- I tried manually importing them, but it wants me to import each individual event -- there must be an easier way to do this. Where does iCal read its calendar data by default in 10.8? Do I have to do anything additional to get iCal to read it?
    Additionally, I can't find my old notational velocity notes -- they should be in Application Support under my old Library files, but I am not seeing them. A spotlight search hasn't yielded anything. Anyone know where they might be? I hadn't changed the default, so I imagine they ought to be there.
    Best,

    A quick look at their web site shows I've misinterpreted what you said - Notational Velocity isn't related to iCal. However if you are still having a problem with that the makers would be the people to ask.
    I'm not sure why you can't get iCal files to work if they are in the correct place. In 10.6.8 the Calendar folder includes a folder for each calendar, and these contain the .ics files which represent the actual events. I don't know whether 10.8 has altered the format as I don't use it.
    You originally said ' I found the old calendar data in Users/my name/Library/Calendars, and copied it over into the Library file on my new machine.' - did you copy the entire Calendars folder intact?

  • Looking for some help with an error message when exporting master file. I'm stuck and would even pay to get this sorted out!

    Hey guys, I'm really in a bind here and need some urgent help tonite. I would even be willing to pay for some actual help and not some vague information that i may not be able to understand if we could do something via skype or some other way that would be much quicker than a message board. Of course I have to have the project done by tomorow . so I'm new to fcpx, but have succesfully exported 2 other projects. I've also ran into this predicament before (error message not allowing me complete export) and have been able to solve that by converting the files i imported off my camera (canon g20) to a different file type (prores).
    so where I'm at now: i have a 13 min short, all shot on my canon g20, imported and converted to prores422 with the brorsoft video converter with all the shots in a single event in fcpx. i'm using fcpx version 10.0.08. I have one main video track in my timeline that is completely full of very fast edits. (all quick 2-5 second clips, sped up shots in 2x, 4x, or 8x, tons of transitions, titles, and a little fx. theres 2 audio tracks, one is narration/speech and the other is an ongoing music track that constantly ducks everytime the subject speaks (tons of ducks/edits). Have you seen mtv cribs? Well i filmed an EXACT replica. So If you've seen one of those episodes, its literally the same exact same thing. I have all of my work completed, everything has been fully rendered, and i have it exactly as I want it.
    I'm including all this information in case it may help. my successful projects ive exported in the past were rather simple, and this one is very complex and full of edits. here is what it looks like in the timeline:
    Ive tried exporting the master file using almost all the different ways with no luck. My primary objective is to get it on youtube by any means by tommorow for a showing to a potential buyer (long story) and so I've been told using the h.264 is the best format for that. This, along with the other methods give me the same error message:
    It think it gives this error message when i reach 24% everytime during export.
    So first of all, what is that error message? Do i need to be concerned about the specifics of it, or is there something major that I'm missing? Like i said, i dont care how, but I need to get this video up on youtube tonite for an important viewing tomorrow. Conceptually, I think if i can figure this one out I shouldnt have any more trouble in the future doing something so basic, yet critical, such as exporting my 40+ hours of work for someone to see.
    anyway, I apologize in advance for my lack of knowledge with this software, and for my extremely long winded question which will probably have the opposite effect for me as most wont want to take the time to read all this, BUT i figured if i was as thorough as possible it might help actually getting a concrete answer, instead of a "read the manual, exporting is on page 37." or "use the share button on the right of the timeline then just click export master file and it will work everytime."
    Cheers everybody, and thank you. Like i said if someone is up, and willing to talk via skype, phone, messanger or any other method that works for you I would be totally down and will compensate you generously for your time. thanks again.
    Taphabit

    boom! that advice was correct and worked. i was able to export the full project as a quicktime movie and it can be uploaded to youtube.
    NOTE, theres is definately quite a few noticeable audio glitches/lags/pops that werent there before doing this. I believe, and will test to make sure, that having a project such as this one needs to render before exporting. I'm not sure if the advice requires the project to be unrendered before exporting for a specific reason, because if it will export fine after rendering the project that's the way to go. like i said the edited version i have in my timeline plays back perfectly but this exported version has quite a few noticeable audio glitches (a few video glitches too). I'm going to retry doing the first few steps of your advice, but then at the end render, then export and compare the results...
    OK, so this leads to a big question, Is this something that is standard for everyone when trying to export? If its not, what causes this error?
    is there any way of preemptively avoiding it in future projects?
    thanks again, and hopefully this information will help others as exporting seem to be one of the biggest problems in fcpx. any word on a new patch or firmware update?

  • Exported QT file: DV captured footage at DV resolution w/ titles in HDV?

    Given that DV and HDV clips may exist in the same sequence in Final Cut Express 4, then when working exclusively with DV captured footage, is there a way to get clips containing only titles to display with HDV resolution in an exported QuickTime file (while the captured footage gets displayed with DV resolution)? Set the sequence to HDV format, even though all of the captured footage is in DV format?

    Thanks for your response, Tom.
    Just to be absolutely clear, would it be possible to create a DVD that consisted of a mixture of DV-resolution frames and HDV-resolution frames, all intercut, such that there would be, say, 60 frames at DV-resolution for approximately 2 seconds (assuming 29.97 frames per second), followed immediately by 90 frames at HDV-resolution for approximately 3 seconds, etc.?
    What about exporting each DV portion of a Final Cut Express 4 sequence as a separate QT file at DV resolution, and exporting each HDV portion of a Final Cut Express 4 sequence as a separate QT file at HDV resolution, then concatenating the files to create a single QT file, then using the latter with iDVD or some other DVD-authoring software to make a DVD?  Would you not end up with the kind of DVD that I described in the first paragraph of this posting?
    Thanks.

Maybe you are looking for